AW: 2010 CUs and SPs
Hi Paul, I can confirm. You can install the CU either on SP1 or on RTM. But the CU does not contain SP1. So if you install the CU without SP1 you have to install SP1 later because CUs released more than 12 months after SP1 will no longer install if SP1 has not been installed before. In addition the SP2010 CU contains the SPF CU. Cheers, Stefan Goßner Senior Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | * +49-89-3176-4069 | http://blogs.technet.com/stefan_gossner Von: ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com] Im Auftrag von Paul Noone Gesendet: Dienstag, 31. Januar 2012 14:17 An: 'ozMOSS' Betreff: RE: 2010 CUs and SPs Hi Shahram, That was my assumption but I'd really appreciate official confirmation. Can someone from MS please confirm? · The HotFix prerequisites state To install this hotfix, you must have Microsoft SharePoint Server 2010 OR Microsoft SharePoint Server 2010 Service Pack 1 · The HotFix is also over 1GB in size! Both these facts lead me to assume otherwise but it is not explicitly stated ANYWHERE. All I can tell you is that the OWSTIMER keeps crapping out during installation due to System.Security.Cryptography.CryptographicException. Any further advice is much appreciated. Regards, Paul From: ozmoss-boun...@ozmoss.commailto:ozmoss-boun...@ozmoss.com [mailto:ozmoss-boun...@ozmoss.com]mailto:[mailto:ozmoss-boun...@ozmoss.com] On Behalf Of Shahram Banihashem Sent: Tuesday, 31 January 2012 2:16 PM To: ozMOSS Subject: Re: 2010 CUs and SPs Hi Paul, You need to install SP1 but not June Update before installing December CU. The word cumulative in cumulative update means that a CU contains all earlier CUs. So December CU contains October, August, ... CUs Regards, Shahram. From: Paul Noone paul.no...@ceosyd.catholic.edu.aumailto:paul.no...@ceosyd.catholic.edu.au To: ozMOSS (ozmoss@ozmoss.commailto:ozmoss@ozmoss.com) ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Sent: Tuesday, 31 January 2012 12:14 PM Subject: 2010 CUs and SPs Hi all, I want to upgrade our RTM 2010 server farm to current CU. Do I need to install SP1 and the June update refresh first?? Or can I just install the December CU? Kind regards, Paul Noone --- Online Developer/SharePoint Administrator Infrastructure Team, ICT Catholic Education Office, Sydney p: (02) 9568 8461 f: (02) 9568 8483 e: paul.no...@ceosyd.catholic.edu.aumailto:paul.no...@ceosyd.catholic.edu.au w: http://www.ceosyd.catholic.edu.au/ ___ ozmoss mailing list ozmoss@ozmoss.commailto:ozmoss@ozmoss.com http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss ___ ozmoss mailing list ozmoss@ozmoss.com http://prdlxvm0001.codify.net/mailman/listinfo/ozmoss
RE: Import Error
Hi Paul, be aware that this is still unsupported. You cannot request support from Microsoft for a site collection created using these steps. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | * +49-89-3176-4069 | http://blogs.technet.com/stefan_gossner From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Paul Noone Sent: Donnerstag, 18. Juni 2009 04:28 To: ozmoss@ozmoss.com Subject: RE: Import Error I've said it before and I'll say it again - that Gary Lapointe is a freaking genius. This simple command could have saved me two days of grief and the whole operation lasted about 2 minutes. stsadm -o gl-convertsubsitetositecollection -sourceurl https://lei-sppdev-01/ict/ -targeturl https://lei-sppdev-01/ict-test/ -nofilecompression -owneremail paul.no...@ceosyd.catholic.edu.aumailto:paul.no...@ceosyd.catholic.edu.au -ownerlogin syd-cenet\paul.noone -nositetemplate This exports the source site, creates the destination site collection and site (based on source site template), and activates any features. The source site was a Team Site with publsihing and several custom features enabled. And they said it couldn't be done. :) Thanks to all, and especially Paul Culmsee for pointing me back to GL's site. Regards, Paul From: Paul Culmsee [mailto:paul.culm...@sevensigma.com.au] Sent: Thursday, 18 June 2009 10:01 AM To: Paul Noone Subject: RE: Import Error Sorry mate not been following the thread, but it smells like a problem I had a while back. Is this relevant at all? http://www.cleverworkarounds.com/2007/11/14/gary-lapointe-is-a-genius-and-has-good-music-taste-too/ From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Paul Noone Sent: Thursday, 18 June 2009 6:48 AM To: ozmoss@ozmoss.com Subject: RE: Import Error Hi Stefan, Thanks. This would probably explain why I'm having so much difficulty. So if this was straight WSS site with no customisations I would have no problem importing it to the site collection root? Per Ajay's suggestion, if I disable the Publishing feature first would I then be able to import my site successfully and simply enable publishing afterwards? Regards, Paul Online Developer, ICT CEO Sydney From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Stefan Goßner Sent: Wednesday, 17 June 2009 6:04 PM To: ozmoss@ozmoss.com Subject: RE: Import Error Hi Paul, what you are trying to achieve is unsupported. See here for details: http://blogs.technet.com/stefan_gossner/archive/2009/05/27/limitations-of-stsadm-o-export-import-related-to-publishing-sites.aspx Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | * +49-89-3176-4069 | http://blogs.technet.com/stefan_gossner From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Paul Noone Sent: Mittwoch, 17. Juni 2009 06:06 To: ozmoss@ozmoss.com Subject: Import Error Hi all, I created a blank site collection (no template) and am trying to import a basic Web as the root site. Am getting the following error. Anyone seen this before, or can shed any light? I'm assuming it's because the import file is a Web and doesn't include expected site collection elements? If anyone's been successful doing this I'd love to hear about it. Kind regards, Paul -- [6/17/2009 11:16:39 AM]: Start Time: 6/17/2009 11:16:39 AM. [6/17/2009 11:16:39 AM]: Progress: Initializing Import. [6/17/2009 11:16:45 AM]: Progress: Starting content import. [6/17/2009 11:16:45 AM]: Progress: De-Serializing Objects to Database. [6/17/2009 11:16:45 AM]: Progress: Importing Folder /ict-test-web/_catalogs/masterpage/Forms/Page Layout. [6/17/2009 11:16:46 AM]: Progress: Importing Folder /ict-test-web/SiteCollectionImages/Forms/Document. [6/17/2009 11:16:46 AM]: FatalError: (null) ict-test-web/SiteCollectionImages/Forms/Document not found. at Microsoft.SharePoint.Library.SPRequest.CreateFolderOnImport(String bstrUrl, String bstrFolderUrl, Guid guidFolderId, Int32 lDoclibRowId) at Microsoft.SharePoint.Deployment.FolderSerializer.CreateFolder(SerializationInfoHelper infoHelper, SPWeb parentWeb, ImportObjectManager objectManager) at Microsoft.SharePoint.Deployment.FolderSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector) at Microsoft.SharePoint.Deployment.XmlFormatter.ParseObject(Type objectType, Boolean isChildObject) at Microsoft.SharePoint.Deployment.XmlFormatter.DeserializeObject(Type objectType, Boolean isChildObject, DeploymentObject envelope) at Microsoft.SharePoint.Deployment.XmlFormatter.Deserialize(Stream serializationStream) at Microsoft.SharePoint.Deployment.ObjectSerializer.Deserialize(Stream serializationStream) at Microsoft.SharePoint.Deployment.ImportObjectManager.ProcessObject(XmlReader xmlReader) at Microsoft.SharePoint.Deployment.SPImport.DeserializeObjects
AW: Content Deployment Time Out [SEC=UNCLASSIFIED]
Hi Fadi, it cannot be done through STSADM or central admin. If you don't want to compile you could do it using a Powershell script that uses the API. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | * +49-89-3176-4069 | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] Im Auftrag von Noja, Fadi Gesendet: Donnerstag, 2. April 2009 00:19 An: ozmoss@ozmoss.com Betreff: Content Deployment Time Out [SEC=UNCLASSIFIED] Hi, I know through code you can extend the content deployment's RemoteTimeout to as long as you want, but is there a way to extend the it through stsadm or through the central admin? Fadi Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: http://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists
AW: Content Deployment [SEC=UNCLASSIFIED]
You can run multiple jobs in parallel if you ensure that only one job runs per source and destination database. As soon as multiple export jobs run on the same source database or multiple import job run on the same destination database you can expect exceptions. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] Im Auftrag von Noja, Fadi Gesendet: Dienstag, 3. März 2009 23:40 An: ozmoss@ozmoss.com Betreff: RE: Content Deployment [SEC=UNCLASSIFIED] Here's the scenario: The farm has 6 application in it, they want Content deployment every 30 minutes. It's fine cause each job only takes about 10 minutes, but if I set all six to be deployed at say 10:00, will it cause an issue. From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Michael Nemtsev Sent: Wednesday, 4 March 2009 9:38 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] As I understand you end up with multiple items in destination site. AFAIK Michael Nemtsev | MOSS MCTS, MS MVP Readify B: http://msmvps.com/blogs/laflour/ T: +61 424 184 978 E: michael.nemt...@readify.netmailto:michael.nemt...@readify.net From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Noja, Fadi Sent: Wednesday, March 04, 2009 9:22 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] We have all those CU installed and content deployment is working. I just want to know if there's any issues if 1 jobs is running and doesn't finish before the second job kicks off. From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Joshua Haebets Sent: Wednesday, 4 March 2009 8:55 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] There are too many issues with content deployment to mention. Make sure you have SP1, Infrastructure Update and Dec and Feb CU installed. These address a lot of the issues but not all Cheers Josh From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Noja, Fadi Sent: Wednesday, 4 March 2009 8:53 AM To: ozmoss@ozmoss.com Subject: Content Deployment [SEC=UNCLASSIFIED] Hi, Has anyone had experience with Content Deployment? We're trying to setup content deployment for multiple sites on the same farm and was wondering if there's issues with multiple deployments happening at the same time. And if there is an issue, if you know of a work around. Fadi Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: http://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists
AW: Content Deployment [SEC=UNCLASSIFIED]
Hi Michael, various different exceptions can occur. Depends on when the conflict occurs. The issues usually show up as random errors. Means when you retry the same deployment it will either succeed or fail at a different place. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] Im Auftrag von Michael Nemtsev Gesendet: Mittwoch, 4. März 2009 09:55 An: ozmoss@ozmoss.com Betreff: RE: Content Deployment [SEC=UNCLASSIFIED] Stefan, What kind of exceptions to expect in logs, when you have multiple jobs run on the same source|destination database? The question is actually how to detect such scenario by logs only?! Are there something specific which shows that they have multiple jobs on the same box. Michael Nemtsev Readify | Microsoft MVP T: 0424 184 978 | E: michael.nemt...@readify.netmailto:michael.nemt...@readify.net From: ozmoss@ozmoss.com [ozm...@ozmoss.com] On Behalf Of Stefan Goßner [stef...@microsoft.com] Sent: Wednesday, 4 March 2009 7:48 PM To: ozmoss@ozmoss.com Subject: AW: Content Deployment [SEC=UNCLASSIFIED] You can run multiple jobs in parallel if you ensure that only one job runs per source and destination database. As soon as multiple export jobs run on the same source database or multiple import job run on the same destination database you can expect exceptions. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] Im Auftrag von Noja, Fadi Gesendet: Dienstag, 3. März 2009 23:40 An: ozmoss@ozmoss.com Betreff: RE: Content Deployment [SEC=UNCLASSIFIED] Here's the scenario: The farm has 6 application in it, they want Content deployment every 30 minutes. It's fine cause each job only takes about 10 minutes, but if I set all six to be deployed at say 10:00, will it cause an issue. From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Michael Nemtsev Sent: Wednesday, 4 March 2009 9:38 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] As I understand you end up with multiple items in destination site. AFAIK Michael Nemtsev | MOSS MCTS, MS MVP Readify B: http://msmvps.com/blogs/laflour/ T: +61 424 184 978 E: michael.nemt...@readify.netmailto:michael.nemt...@readify.net From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Noja, Fadi Sent: Wednesday, March 04, 2009 9:22 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] We have all those CU installed and content deployment is working. I just want to know if there's any issues if 1 jobs is running and doesn't finish before the second job kicks off. From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Joshua Haebets Sent: Wednesday, 4 March 2009 8:55 AM To: ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] There are too many issues with content deployment to mention. Make sure you have SP1, Infrastructure Update and Dec and Feb CU installed. These address a lot of the issues but not all Cheers Josh From: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] On Behalf Of Noja, Fadi Sent: Wednesday, 4 March 2009 8:53 AM To: ozmoss@ozmoss.com Subject: Content Deployment [SEC=UNCLASSIFIED] Hi, Has anyone had experience with Content Deployment? We're trying to setup content deployment for multiple sites on the same farm and was wondering if there's issues with multiple deployments happening at the same time. And if there is an issue, if you know of a work around. Fadi Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you might want to join: http://www.codify.com/lists Support procedure: https://www.codify.com/lists/support List address: ozmoss@ozmoss.com Subscribe: ozmoss-subscr...@ozmoss.com Unsubscribe: ozmoss-unsubscr...@ozmoss.com List FAQ: http://www.codify.com/lists/ozmoss Other lists you
AW: Content Deployment [SEC=UNCLASSIFIED]
Hi Ajay, if the databases are separate this should be fine. You should use a dedicated central admin server for the deploying import server which is not one of the WFEs of the farm - then the performance should not be affected to bad. Main issue will be that the items updated through the import will be invalided in the various caches on the WFEs. Cheers, Stefan Von: ozmoss@ozmoss.com [mailto:ozm...@ozmoss.com] Im Auftrag von Ajay Gesendet: Mittwoch, 4. März 2009 22:27 An: ozmoss@ozmoss.com Betreff: Re: Content Deployment [SEC=UNCLASSIFIED] Hi Stefan, Hi Stefan, Good to see the expert in this list. In my current client engagement,, ultimately I will have 18 (or more) simultaneous deployment jobs running each in different source and destination database. Do you think content deployment will be able to handle this? These all be from Staging to Production,,, can you give some idea what kind of performance degradation (or not) of the Production box will be when it will importing content. Cheers, Ajay On Wed, Mar 4, 2009 at 10:00 PM, Stefan Goßner stef...@microsoft.commailto:stef...@microsoft.com wrote: Hi Michael, various different exceptions can occur. Depends on when the conflict occurs. The issues usually show up as random errors. Means when you retry the same deployment it will either succeed or fail at a different place. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [mailto:ozmoss@ozmoss.commailto:ozmoss@ozmoss.com] Im Auftrag von Michael Nemtsev Gesendet: Mittwoch, 4. März 2009 09:55 An: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Betreff: RE: Content Deployment [SEC=UNCLASSIFIED] Stefan, What kind of exceptions to expect in logs, when you have multiple jobs run on the same source|destination database? The question is actually how to detect such scenario by logs only?! Are there something specific which shows that they have multiple jobs on the same box. Michael Nemtsev Readify | Microsoft MVP T: 0424 184 978 | E: michael.nemt...@readify.netmailto:michael.nemt...@readify.net From: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [ozm...@ozmoss.commailto:ozmoss@ozmoss.com] On Behalf Of Stefan Goßner [stef...@microsoft.commailto:stef...@microsoft.com] Sent: Wednesday, 4 March 2009 7:48 PM To: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Subject: AW: Content Deployment [SEC=UNCLASSIFIED] You can run multiple jobs in parallel if you ensure that only one job runs per source and destination database. As soon as multiple export jobs run on the same source database or multiple import job run on the same destination database you can expect exceptions. Cheers, Stefan Goßner Escalation Engineer | CSS SharePoint Products and Technologies | Microsoft GmbH | http://blogs.technet.com/stefan_gossner Von: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [mailto:ozmoss@ozmoss.commailto:ozmoss@ozmoss.com] Im Auftrag von Noja, Fadi Gesendet: Dienstag, 3. März 2009 23:40 An: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Betreff: RE: Content Deployment [SEC=UNCLASSIFIED] Here's the scenario: The farm has 6 application in it, they want Content deployment every 30 minutes. It's fine cause each job only takes about 10 minutes, but if I set all six to be deployed at say 10:00, will it cause an issue. From: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [mailto:ozmoss@ozmoss.commailto:ozmoss@ozmoss.com] On Behalf Of Michael Nemtsev Sent: Wednesday, 4 March 2009 9:38 AM To: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] As I understand you end up with multiple items in destination site. AFAIK Michael Nemtsev | MOSS MCTS, MS MVP Readify B: http://msmvps.com/blogs/laflour/ T: +61 424 184 978 E: michael.nemt...@readify.netmailto:michael.nemt...@readify.net From: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [mailto:ozmoss@ozmoss.commailto:ozmoss@ozmoss.com] On Behalf Of Noja, Fadi Sent: Wednesday, March 04, 2009 9:22 AM To: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] We have all those CU installed and content deployment is working. I just want to know if there's any issues if 1 jobs is running and doesn't finish before the second job kicks off. From: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com [mailto:ozmoss@ozmoss.commailto:ozmoss@ozmoss.com] On Behalf Of Joshua Haebets Sent: Wednesday, 4 March 2009 8:55 AM To: ozmoss@ozmoss.commailto:ozmoss@ozmoss.com Subject: RE: Content Deployment [SEC=UNCLASSIFIED] There are too many issues with content deployment to mention. Make sure you have SP1, Infrastructure Update and Dec and Feb CU installed. These address a lot of the issues but not all Cheers Josh From