Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Hi, just to give a short feedback: Finally Eric5 is up and running on my PC :-) I was able to compile the ui Files then to install and startup Eric5. Thank you for all the support. I will check out the tutorials now. Von: Detlev Offenbach det...@die-offenbachs.de An: al comtronic...@yahoo.com Gesendet: 19:24 Freitag, 3.Mai 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 Hello, you will not find a uic.py file. If you import a package (i.e. PyQt4.uic) the __init__.py file will be read. Are you sure, there is no broken PyQt4 installation somewhere else on your drive? Other than that I don't have an idea about what could be wrong. It is definitely working ok on my Windows installations and not an eric issue. Regards, Detlev On Thursday 02 May 2013, 12:13:04 al wrote: Hi, I do have the __init__.py in the uic dir. Trying import PyQt4.uic I get: import PyQt4.uic Traceback (most recent call last): File stdin, line 1, in module ImportError: No module named PyQt4.uic I tried now several Phyton 32 64 bit (2.7 3.3) and PyQt4 combinations. In all of the installations I can find the uic dir but NO *.UIC file Where is the UIC File/Module located in your directory? Hello, you should have a file called '__init__.py' in the uic package (directory). Please try this statement in a Python shell: import PyQt4.uic If that throws an error, the a.m. __init__.py file is not there. I checked it over here with PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x32 and it works fine. Regards, Detlev On Thursday 02 May 2013, 09:01:01 al wrote: Ok, I have been searching for UIC: in Python33_x32\Lib\site-packages\PyQt4\uic I can find a pyuic.py file but no PyQt4.uic Where should this file be located??? I repeated full installation of PyQt4-4.10.1-gpl-Py3.3-Qt4.8.4-x32 without errors. But the PyQt4.uic does not show up Do I need to install a different PyQt4? Or what am I doing wrong at installation? How can I obtain this missing PyQt4.uic??? Hello, that message simply means, that your PyQt4 installation is not complete. It is missing uic module. Nothing I can do about. Detlev On Thursday 02 May 2013, 05:50:37 al wrote: Now I got time to check your info ... but after getting the source code from repo I get following error: G:\Download\Programmieren\eric5_reppython compileuifiles.py Compiling user interface files... An internal error occured. Please report all the output of the program, including the following traceback, to eric5-b...@eric-ide.python-projects.org. Traceback (most recent call last): File compileuifiles.py, line 114, in module main(sys.argv) File compileuifiles.py, line 109, in main compileUiFiles() File compileuifiles.py, line 22, in compileUiFiles from PyQt4.uic import compileUi ImportError: No module named PyQt4.uic If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Now I got time to check your info ... but after getting the source code from repo I get following error: G:\Download\Programmieren\eric5_reppython compileuifiles.py Compiling user interface files... An internal error occured. Please report all the output of the program, including the following traceback, to eric5-b...@eric-ide.python-projects.org. Traceback (most recent call last): File compileuifiles.py, line 114, in module main(sys.argv) File compileuifiles.py, line 109, in main compileUiFiles() File compileuifiles.py, line 22, in compileUiFiles from PyQt4.uic import compileUi ImportError: No module named PyQt4.uic Von: Detlev Offenbach det...@die-offenbachs.de An: pyqt@riverbankcomputing.com; al comtronic...@yahoo.com CC: eric5-b...@eric-ide.python-projects.org eric5-b...@eric-ide.python-projects.org Gesendet: 8:22 Sonntag, 28.April 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Hello, that message simply means, that your PyQt4 installation is not complete. It is missing uic module. Nothing I can do about. Detlev On Thursday 02 May 2013, 05:50:37 al wrote: Now I got time to check your info ... but after getting the source code from repo I get following error: G:\Download\Programmieren\eric5_reppython compileuifiles.py If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far *Detlev Offenbach* det...@die-offenbachs.de *Detlev Offenbach* det...@die-offenbachs.de ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Ok, I have been searching for UIC: in Python33_x32\Lib\site-packages\PyQt4\uic I can find a pyuic.py file but no PyQt4.uic Where should this file be located??? I repeated full installation of PyQt4-4.10.1-gpl-Py3.3-Qt4.8.4-x32 without errors. But the PyQt4.uic does not show up Do I need to install a different PyQt4? Or what am I doing wrong at installation? How can I obtain this missing PyQt4.uic??? Von: Detlev Offenbach det...@die-offenbachs.de An: pyqt@riverbankcomputing.com; al comtronic...@yahoo.com Gesendet: 16:14 Donnerstag, 2.Mai 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 Hello, that message simply means, that your PyQt4 installation is not complete. It is missing uic module. Nothing I can do about. Detlev On Thursday 02 May 2013, 05:50:37 al wrote: Now I got time to check your info ... but after getting the source code from repo I get following error: G:\Download\Programmieren\eric5_reppython compileuifiles.py Compiling user interface files... An internal error occured. Please report all the output of the program, including the following traceback, to eric5-b...@eric-ide.python-projects.org. Traceback (most recent call last): File compileuifiles.py, line 114, in module main(sys.argv) File compileuifiles.py, line 109, in main compileUiFiles() File compileuifiles.py, line 22, in compileUiFiles from PyQt4.uic import compileUi ImportError: No module named PyQt4.uic If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Hi, I do have the __init__.py in the uic dir. Trying import PyQt4.uic I get: import PyQt4.uic Traceback (most recent call last): File stdin, line 1, in module ImportError: No module named PyQt4.uic I tried now several Phyton 32 64 bit (2.7 3.3) and PyQt4 combinations. In all of the installations I can find the uic dir but NO *.UIC file Where is the UIC File/Module located in your directory? Von: Detlev Offenbach det...@die-offenbachs.de An: al comtronic...@yahoo.com Gesendet: 18:29 Donnerstag, 2.Mai 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 Hello, you should have a file called '__init__.py' in the uic package (directory). Please try this statement in a Python shell: import PyQt4.uic If that throws an error, the a.m. __init__.py file is not there. I checked it over here with PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x32 and it works fine. Regards, Detlev On Thursday 02 May 2013, 09:01:01 al wrote: Ok, I have been searching for UIC: in Python33_x32\Lib\site-packages\PyQt4\uic I can find a pyuic.py file but no PyQt4.uic Where should this file be located??? I repeated full installation of PyQt4-4.10.1-gpl-Py3.3-Qt4.8.4-x32 without errors. But the PyQt4.uic does not show up Do I need to install a different PyQt4? Or what am I doing wrong at installation? How can I obtain this missing PyQt4.uic??? Hello, that message simply means, that your PyQt4 installation is not complete. It is missing uic module. Nothing I can do about. Detlev On Thursday 02 May 2013, 05:50:37 al wrote: Now I got time to check your info ... but after getting the source code from repo I get following error: G:\Download\Programmieren\eric5_reppython compileuifiles.py Compiling user interface files... An internal error occured. Please report all the output of the program, including the following traceback, to eric5-b...@eric-ide.python-projects.org. Traceback (most recent call last): File compileuifiles.py, line 114, in module main(sys.argv) File compileuifiles.py, line 109, in main compileUiFiles() File compileuifiles.py, line 22, in compileUiFiles from PyQt4.uic import compileUi ImportError: No module named PyQt4.uic If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
If you need the fix urgently just get the source code from the source repo and install from sources. Instruction on how to get the source code is contained on the code page of the eric web site. Detlev On Saturday 27 April 2013, 12:57:33 al wrote: Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far *Detlev Offenbach* det...@die-offenbachs.de ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
[PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
The easiest way on Windows is to use the PyQt4 windows installer. After that just run the eric install script. Regards, Detlev On Saturday 27 April 2013, 04:23:30 al wrote: Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt- win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt- win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above *Detlev Offenbach* det...@die-offenbachs.de ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
I have downloaded PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 which requests a phyton 3.3.x So I installed Phyten 3.3.1 and PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 Which leads to G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Sorry, please install QtHelp. Error: DLL load failed: %1 ist keine zulässige Win32-Anwendung. Press enter to continue... So what do I have to do? Any explanation what do I have to take care of? Von: Detlev Offenbach det...@die-offenbachs.de An: pyqt@riverbankcomputing.com; al comtronic...@yahoo.com Gesendet: 13:05 Samstag, 27.April 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 The easiest way on Windows is to use the PyQt4 windows installer. After that just run the eric install script. Regards, Detlev On Saturday 27 April 2013, 04:23:30 al wrote: Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Could it be the case, that you have a mix of architectures installed, i.e. Python 32-bit and PyQt4 64-bit? Please note, that eric5 support for Qt5 is still marked as experimental. If you want to get a stable configuration please use the PyQt4 installer containing Qt 4.8.4. Detlev On Saturday 27 April 2013, 06:22:11 al wrote: I have downloaded PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 which requests a phyton 3.3.x So I installed Phyten 3.3.1 and PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 Which leads to G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Sorry, please install QtHelp. Error: DLL load failed: %1 ist keine zulässige Win32-Anwendung. Press enter to continue... So what do I have to do? Any explanation what do I have to take care of? The easiest way on Windows is to use the PyQt4 windows installer. After that just run the eric install script. Regards, Detlev On Saturday 27 April 2013, 04:23:30 al wrote: Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt- win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt- win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above *Detlev Offenbach* det...@die-offenbachs.de *Detlev Offenbach* det...@die-offenbachs.de ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
At the end I got much further: G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Found QtHelp Found QScintilla2 Found QtGui Found QtNetwork Found QtSql Found QtSvg Found QtWebKit Qt Version: 4.8.4 PyQt Version: 4.10.1 QScintilla Version: 2.7.1 All dependencies ok. Compiling user interface files... Compiling source files... Installing eric5 ... Installation complete. Press enter to continue... But starting ERIC5 says G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2\ericpython eric5.py An unhandled exception occurred. Please report the problem using the error reporting dialog or via email to eric5-bugs@eric-ide.python-pro jects.org. A log has been written to C:\Users\comtronic2013\_eric5\eric5_error.log. Error information: 2013-04-27, 17:36:41 class 'ImportError': cannot import name pyqtconfig File eric5.py, line 274, in module main() File eric5.py, line 194, in main Startup.setLibraryPaths() File G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2\eric\Toolbox\Startup.p y, line 134, in setLibraryPaths from PyQt4 import pyqtconfig Version Numbers: Python 3.3.1 Qt 4.8.4 PyQt4 4.10.1 sip 4.14.5 QScintilla 2.7.1 WebKit 534.34 eric5 5.3.2 (rev c8a6412d098a) Platform: win32 3.3.1 (v3.3.1:d9893d13c628, Apr 6 2013, 20:25:12) [MSC v.1600 32 bit (Intel)] I do not give up yet ;-) Any help warmly appreciated ... Von: Detlev Offenbach det...@die-offenbachs.de An: pyqt@riverbankcomputing.com; al comtronic...@yahoo.com Gesendet: 14:28 Samstag, 27.April 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 Could it be the case, that you have a mix of architectures installed, i.e. Python 32-bit and PyQt4 64-bit? Please note, that eric5 support for Qt5 is still marked as experimental. If you want to get a stable configuration please use the PyQt4 installer containing Qt 4.8.4. Detlev On Saturday 27 April 2013, 06:22:11 al wrote: Ihave downloaded PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 which requests a phyton 3.3.x So I installed Phyten 3.3.1 and PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 Which leads to G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Sorry, please install QtHelp. Error: DLL load failed: %1 ist keine zulässige Win32-Anwendung. Press enter to continue... So what do I have to do? Any explanation what do I have to take care of? The easiest way on Windows is to use the PyQt4 windows installer. After that just run the eric install script. Regards, Detlev On Saturday 27 April 2013, 04:23:30 al wrote: Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Well, that will be fixed in the next release. Unfortunately Phil removed that file from the installer. Detlev On Saturday 27 April 2013, 08:44:58 al wrote: At the end I got much further: G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Found QtHelp Found QScintilla2 Found QtGui Found QtNetwork Found QtSql Found QtSvg Found QtWebKit Qt Version: 4.8.4 PyQt Version: 4.10.1 QScintilla Version: 2.7.1 All dependencies ok. Compiling user interface files... Compiling source files... Installing eric5 ... Installation complete. Press enter to continue... But starting ERIC5 says G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2\ericpython eric5.py An unhandled exception occurred. Please report the problem using the error reporting dialog or via email to eric5-bugs@eric- ide.python-pro jects.org. A log has been written to C:\Users\comtronic2013\_eric5\eric5_error.log. Error information: 2013-04-27, 17:36:41 class 'ImportError': cannot import name pyqtconfig File eric5.py, line 274, in module main() File eric5.py, line 194, in main Startup.setLibraryPaths() File G: \Download\Programmieren\eric5-5.3.2\eric5-5.3.2\eric\Toolbox\Startup.p y, line 134, in setLibraryPaths from PyQt4 import pyqtconfig Version Numbers: Python 3.3.1 Qt 4.8.4 PyQt4 4.10.1 sip 4.14.5 QScintilla 2.7.1 WebKit 534.34 eric5 5.3.2 (rev c8a6412d098a) Platform: win32 3.3.1 (v3.3.1:d9893d13c628, Apr 6 2013, 20:25:12) [MSC v.1600 32 bit (Intel)] I do not give up yet ;-) Any help warmly appreciated ... Could it be the case, that you have a mix of architectures installed, i.e. Python 32-bit and PyQt4 64-bit? Please note, that eric5 support for Qt5 is still marked as experimental. If you want to get a stable configuration please use the PyQt4 installer containing Qt 4.8.4. Detlev On Saturday 27 April 2013, 06:22:11 al wrote: ___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10
Hi Detlev, when is the next release planned? Can you maybe mail me the missing file and a short instruction where to put it so I will be able to start ERIC 5? Thank you for your support so far Von: Detlev Offenbach det...@die-offenbachs.de An: pyqt@riverbankcomputing.com; al comtronic...@yahoo.com CC: eric5-b...@eric-ide.python-projects.org eric5-b...@eric-ide.python-projects.org Gesendet: 19:14 Samstag, 27.April 2013 Betreff: Re: [PyQt] Installing Eric Python IDE got stuck at PyQt-win-gpl-4.10 Well, that will be fixed in the next release. Unfortunately Phil removed that file from the installer. Detlev On Saturday 27 April 2013, 08:44:58 al wrote: At the end I got much further: G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Found QtHelp Found QScintilla2 Found QtGui Found QtNetwork Found QtSql Found QtSvg Found QtWebKit Qt Version: 4.8.4 PyQt Version: 4.10.1 QScintilla Version: 2.7.1 All dependencies ok. Compiling user interface files... Compiling source files... Installing eric5 ... Installation complete. Press enter to continue... But starting ERIC5 says G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2\ericpython eric5.py An unhandled exception occurred. Please report the problem using the error reporting dialog or via email to eric5-bugs@eric-ide.python-pro jects.org. A log has been written to C:\Users\comtronic2013\_eric5\eric5_error.log. Error information: 2013-04-27, 17:36:41 class 'ImportError': cannot import name pyqtconfig File eric5.py, line 274, in module main() File eric5.py, line 194, in main Startup.setLibraryPaths() File G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2\eric\Toolbox\Startup.p y, line 134, in setLibraryPaths from PyQt4 import pyqtconfig Version Numbers: Python 3.3.1 Qt 4.8.4 PyQt4 4.10.1 sip 4.14.5 QScintilla 2.7.1 WebKit 534.34 eric5 5.3.2 (rev c8a6412d098a) Platform: win32 3.3.1 (v3.3.1:d9893d13c628, Apr 6 2013, 20:25:12) [MSC v.1600 32 bit (Intel)] I do not give up yet ;-) Any help warmly appreciated ... Could it be the case, that you have a mix of architectures installed, i.e. Python 32-bit and PyQt4 64-bit? Please note, that eric5 support for Qt5 is still marked as experimental. If you want to get a stable configuration please use the PyQt4 installer containing Qt 4.8.4. Detlev On Saturday 27 April 2013, 06:22:11 al wrote: Ihave downloaded PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 which requests a phyton 3.3.x So I installed Phyten 3.3.1 and PyQt4-4.10.1-gpl-Py3.3-Qt5.0.2-x64 Which leads to G:\Download\Programmieren\eric5-5.3.2\eric5-5.3.2python install.py Checking dependencies Python Version: 3.3.1 Found PyQt4 Sorry, please install QtHelp. Error: DLL load failed: %1 ist keine zulässige Win32-Anwendung. Press enter to continue... So what do I have to do? Any explanation what do I have to take care of? The easiest way on Windows is to use the PyQt4 windows installer. After that just run the eric install script. Regards, Detlev On Saturday 27 April 2013, 04:23:30 al wrote: Hello all, I am struggling my way trough installing the ERIC Python IDE on Win8: and got stuck at PyQt-win-gpl-4.10 with following error message: mingw32-make[1]: Entering directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10 /PyQt-win-gpl-4.10/QtCore' makefile:30: warning: overriding recipe for target '.c.o' makefile:27: warning: ignoring old recipe for target '.c.o' Der Befehl legacy ist entweder falsch geschrieben oder konnte nicht gefunden werden. makefile:40: recipe for target 'install' failed mingw32-make[1]: *** [install] Error 1 mingw32-make[1]: Leaving directory 'G:/Download/Programmieren/PyQt-win-gpl-4.10/ PyQt-win-gpl-4.10/QtCore' makefile:28: recipe for target 'install' failed mingw32-make: *** [install] Error 2 I have been searching for hints how to resolve this problem but could not find anything. Would be nice if someone could give me a info how I could proceed -- python configure.py (python configure.py -p win32-g++) - both work mingw32-make - works fine mingw32-make install - throws the error posted above -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de -- Detlev Offenbach det...@die-offenbachs.de___ PyQt mailing listPyQt@riverbankcomputing.com http://www.riverbankcomputing.com/mailman/listinfo/pyqt
