Re: [Ql-Users] Easyptr question

[John Gilpin via Ql-Users]

Hi Daniel,

I had a similar problem regarding a large menu in EP4. I originally 
wrote it without any problems but when I came to load it again to make 
some slight changes I found that it wouldn't load. A member from the 
local Sub Group was also playing about with it and he found that it 
would load OK if he changed the screen resolution. (or was it the 
MODE?). Whichever it was worked for metoo! As you say, it worked when 
running the complete programme, so I didn't try to do anything else with 
it. (I may have got an error report when trying to load it outside the 
main programme (saying something to the effect that it was too large for 
the space available!) but it was a long time ago and we are all getting 
older!!


HTH

Kind Regards,

John Gilpin.





On 27/08/2017 21:40, Daniel Baum via Ql-Users wrote:

Hi all,

Almost 20 years ago I wrote a program called Qbase, and now I am trying to
run and compile the source code.

There are two versions, the older one is mostly text based, with a few
added menus. This version runs and compiles without any problems.

The newer version was written with easyPtr, and I am having problems
getting some of the menu files to work. Most of the menus load and display
without any problems but the main menus do not. I can load them into
easyMenu, but MDRAW does not display them, the menus either do not display
at all, or they are garbled.

The main menus are much larger than the sub menus (the ones that do work),
so maybe that's a clue.

The actual compiled program from the zip does work, and I am stumped.

Obviously both the operating system and easyPtr have gone through many
versions since I wrote qbase, so I assume something has changed in the
environment. Does anyone have a clue where I should look? I am using the
latest QPC, SMSQ/E and easyPtr, as far as I know.

Thanks,

D.
___
QL-Users Mailing List



___
QL-Users Mailing List

Re: [Ql-Users] Quanta Magazine

[John Gilpin via Ql-Users]

Hi George and others who have also missed the Apr/May issue of QUANTA eMag,

After considerable investigation, it would appear that having sent the 
Apr/May Issue of QUANTA eMag out in two batches, I may have sent the 
same batch out twice! Some time ago, I sent out the eMag out as one 
batch but together with a large .PDF file I was advised by BT that I had 
exceeded some limit that I wasn't aware of and it was suggested that I 
sent the eMag out in two batches.


Of course the error with the recent issue is entirely my fault for which 
I apologise to all affected and both John Southern and I have tried to 
keep pace with the messages received telling us that they had not 
received their eMag. I think that most of you know that I have resigned 
from the QUANTA Committee as treasurer and Membership Secretary with 
effect from the A.G.M. in April and John Southern has taken over from 
me. Good luck John!


However, just in case anyone has still not received their eMag, I have 
decided to send the eMag again to all the members who were on the second 
mailing list. To those who have already received the eMag, I offer my 
sincere apologies for any inconvenience caused by receiving a duplicate 
attachment.


Hopefully having corrected the error, I only have to say thank you to 
all who have helped me with my QLing and should any of you have a 
problem with anything that you think I can answer (or know someone who 
can), please drop me an email and I will endeavor to provide either a 
full answer or perhaps a key from which you can sort out your problem on 
your own.


To you all, I hope that you continue to get a load of pleasure from your 
QL and I look forward to following your activities either through this 
list or through the QUANTA Magazine .


Cheers and kind regards,

John Gilpin.




On 24/07/2017 16:56, George Gwilt wrote:


On 24 Jul 2017, at 16:52, John Gilpin > wrote:


My fault entirely. - See attached


Thank you

George


___
QL-Users Mailing List