> Does anyone know why the following in QPC2 reports "Invalid Channel ID"
>
> WINDOW 448,200,32,16
> PAPER #1,3
>> In fact, any attempt to change #1 after the WINDOW command reports an
> invalid channel.>> I also found some of the character combinations were not
> working in
> v4.04 (eg CTRL SHIFT - did not produce a down arrow).
> That also now works in v4.05 but CTRL \ does not produce the left arrow
> still. Hi, I am using both QPC2 4.04 SMSQE/E 3.26 and also QPC2 4.05
> SMSQE/E 3.31.They both seem to work the same.I cannot replicate any of the
> errors mentioned, except that I cannot produce the left arrow. As Dilwyn
> points out, doing an OPEN #1, would do an automatic CLOSE #1 first, and
> perhaps that has caused the problems. > On QPC2 v4.04 here I didn't have
> to close anything - I just entered the
> two commands above as soon as it started Perhaps there is something in
> the Boot file causing the issue? Michael
___
QL-Users Mailing List