Re: [R] reset par() within plot layout
Peter Ehlers wrote: Janke ten Holt wrote: Tom Gottfried wrote: Janke, Janke ten Holt schrieb: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) look at par.ini: it's a list with all the argument-value pairs for par(). You might be able to solve your problem by removing the appropriate elements from par.ini before calling par(par.ini). Do the following to look which ones need to be kept for the layout: par() layout(matrix(1:2, nr=2)) par() Tom par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. Yes, that had occured to me too. So I tried: layout(matrix(1:2, nr=2)) par(no.readonly=TRUE) plot(1:10) par(no.readonly=TRUE) This has differences in fig mfg usr xaxp yaxp But even keeping these back does not solve my problem. So I figured there must be something else going on that I am unaware of... I think that what you want is layout(matrix(1:2, nr=2)) opar - par(col=red) plot(1:100) par(opar) plot(1:10) This seems to work indeed. But I don't understand why... I would think that opar contains the par settings, including the col=red, but I guess it doesn't. I will look into par's behaviour some more... Thank you! Janke -Peter Ehlers btw, your exact suggestion, par() layout(matrix(1:2, nr=2)) par() does not result in any differences. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Tom Gottfried wrote: I think it would be much easier to use grid-graphics for your task. It's made for such things. This is a good introduction: Paul Murrell. The grid graphics package. R News, 2(2):14-19, June 2002 Thank you for your suggestion. I will certainly check it out. Janke Tom __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Hi, From ?par, Value When parameters are set, their former values are returned in an invisible named list. Therefore opar - par(col=red) will not contain col=red. HTH, baptiste 2009/10/27 Janke ten Holt j.c.ten.h...@rug.nl: This seems to work indeed. But I don't understand why... I would think that opar contains the par settings, including the col=red, but I guess it doesn't. I will look into par's behaviour some more... Thank you! Janke -Peter Ehlers __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
baptiste auguie wrote: Hi, From ?par, Value When parameters are set, their former values are returned in an invisible named list. Wow, I must have missed that. Thanks, Janke Therefore opar - par(col=red) will not contain col=red. HTH, baptiste 2009/10/27 Janke ten Holt j.c.ten.h...@rug.nl: This seems to work indeed. But I don't understand why... I would think that opar contains the par settings, including the col=red, but I guess it doesn't. I will look into par's behaviour some more... Thank you! Janke -Peter Ehlers __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
I think it would be much easier to use grid-graphics for your task. It's made for such things. This is a good introduction: Paul Murrell. The grid graphics package. R News, 2(2):14-19, June 2002 Tom __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
[R] reset par() within plot layout
Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Maybe something like this? #Desired result is a layout of 2 plots: one red and one black par(mfrow=c(2,1)) par(col=red) plot(1:100) par(col=black) plot(1:10) On Fri, Oct 23, 2009 at 7:26 AM, Janke ten Holt j.c.ten.h...@rug.nl wrote: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- Stephen Sefick Let's not spend our time and resources thinking about things that are so little or so large that all they really do for us is puff us up and make us feel like gods. We are mammals, and have not exhausted the annoying little problems of being mammals. -K. Mullis __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
OK, maybe I oversimplified the example, because you are of course correct... I am working on a function, which I feed data to plot in layouts of specified dimensions. I want to be able to set any par() variables for each plot in the layout. Because the next plot does not know which par() variables were changed in the previous plot, I want to reset all par() variables after each plot, rather than simply change back one specific par() variable. So I really need to reset par() without 'messing with' my layout. stephen sefick wrote: Maybe something like this? #Desired result is a layout of 2 plots: one red and one black par(mfrow=c(2,1)) par(col=red) plot(1:100) par(col=black) plot(1:10) On Fri, Oct 23, 2009 at 7:26 AM, Janke ten Holt j.c.ten.h...@rug.nl wrote: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Janke, Janke ten Holt schrieb: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) look at par.ini: it's a list with all the argument-value pairs for par(). You might be able to solve your problem by removing the appropriate elements from par.ini before calling par(par.ini). Do the following to look which ones need to be kept for the layout: par() layout(matrix(1:2, nr=2)) par() Tom par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Tom Gottfried wrote: Janke, Janke ten Holt schrieb: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) look at par.ini: it's a list with all the argument-value pairs for par(). You might be able to solve your problem by removing the appropriate elements from par.ini before calling par(par.ini). Do the following to look which ones need to be kept for the layout: par() layout(matrix(1:2, nr=2)) par() Tom par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. Yes, that had occured to me too. So I tried: layout(matrix(1:2, nr=2)) par(no.readonly=TRUE) plot(1:10) par(no.readonly=TRUE) This has differences in fig mfg usr xaxp yaxp But even keeping these back does not solve my problem. So I figured there must be something else going on that I am unaware of... btw, your exact suggestion, par() layout(matrix(1:2, nr=2)) par() does not result in any differences. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] reset par() within plot layout
Janke ten Holt wrote: Tom Gottfried wrote: Janke, Janke ten Holt schrieb: Dear list, I would like to produce a matrix of plots, where par() is reset after each plot (see below [simplified] example). When I use layout() to do so, I seem to also reset the layout. I have not been able to figure out how to prevent this from happening. Any help is greatly appreciated! Janke Example code: #Desired result is a layout of 2 plots: one red and one black layout(matrix(1:2, nr=2)) par.ini - par(no.readonly=TRUE) look at par.ini: it's a list with all the argument-value pairs for par(). You might be able to solve your problem by removing the appropriate elements from par.ini before calling par(par.ini). Do the following to look which ones need to be kept for the layout: par() layout(matrix(1:2, nr=2)) par() Tom par(col=red) plot(1:100) par(par.ini) plot(1:10) -- Janke ten Holt Dept. of Psychology/Sociology University of Groningen, the Netherlands __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. Yes, that had occured to me too. So I tried: layout(matrix(1:2, nr=2)) par(no.readonly=TRUE) plot(1:10) par(no.readonly=TRUE) This has differences in fig mfg usr xaxp yaxp But even keeping these back does not solve my problem. So I figured there must be something else going on that I am unaware of... I think that what you want is layout(matrix(1:2, nr=2)) opar - par(col=red) plot(1:100) par(opar) plot(1:10) -Peter Ehlers btw, your exact suggestion, par() layout(matrix(1:2, nr=2)) par() does not result in any differences. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
