[Repeater-Builder] FS: DB-4062 VHF Duplexer
I have a Decibel Products 6 can duplexer. The cans are mounted in a metal box made for them. This unit is heavy. I will NOT ship. Duplexer was removed from commercial service. TX 155.490 RX 156.090 Was used as a stand-by repeater. Taking offers. Located in Twin Lake, MI.49457 Jim, K8COP
[Repeater-Builder] FS: DB-4062 Duplexer
I have a Decibel Products 6 can duplexer. The cans are mounted in a metal enclosure made for them. This unit is heavy. Duplexer was removed from commercial service. TX 155.490 RX 156.090 Used as a stand-by repeater. Taking offers. Located in Twin Lake, MI.49457 Jim, K8COP
[Repeater-Builder] Mitreks
I have a stack of UHF/VHF/Lo Band Mitreks. There is some cables, etc with them. Free for pick up ONLY. Located near Muskegon, MI. E-mail me direct [EMAIL PROTECTED] Jim, K8COP
[Repeater-Builder] Micor Station Conversion Problem
I have a Micor Station 100 VHF that was used as a paging base. I removed the backplane and installed a normal one and removed the cards for paging, and installed normal base station cards. I completed the conversion (removing diode) for allowing the receiver to operate all the time. Here is the problem...The receiver does not stay on when the PTT is pushed on the station control card. Is their a jumper I am missing somewhere? Thanks, Jim, K8COP
[Repeater-Builder] Micor Station Conversion Problem
It's a Unified backplane. Jim, K8COP _,_._,___
[Repeater-Builder] Motorola VHF Micor Mobile Drawers
I have ten of these units. They are in the 155.000 Mhz area. PL encode/decode with them. $10.00 each. Pick up only in western michigan. Jim, K8COP
[Repeater-Builder] 800 Mhz Duplexer
I have a Decibel Products 800 Mhz duplexer. Motorola number TDN6917-A, two can unit. Is this item worth anything, our useful in the Ham Band? Written freqs. 855.8375/810.8375 Mhz. Jim, K8COP
[Repeater-Builder] Manuals FS
I have the following used manuals for sale: Motorola Consolette Base Station 450-512 MHz 68P81012E15 Issue E Motorola Consolette Base Station 450-512 MHz 68P81012E15 Issue L Motorola Consolette Base Station 136-174 MHz 68P81018E45 Issue D Motorola MICOR Base and Repeater Stations UHF 68P81025E50 Issue E Motorola MICOR Mobile 132-174 Mhz 68P81008E40 Issue H Motorola MICOR Mobile 25-50 Mhz 68P81008E35 Issue H Motorola MICOR Compa-Station w/HEARN 132-174 Mhz 68P81017E85 Issue D Motorola MICOR Compa-Station w/Dig Decoder 132-174 68P81016E15 Issue F Motorola MAXAR-50 Mobile 440-470 Mhz 68P81064E35 Issue A Motorola MAXAR-80 Mobile 29.7-50 Mhz 68P81038E05 Issue A Motorola Nucleus Paging Station User's Guide68P81000F10 Issue N Motorola FLEXAR Base Station68P81035E55 Issue C Motorola Radius R100 Repeater Station 450 Mhz 68P81071E50 Issue A Motorola MOCOM 10 Mobile 132-174 Mhz 68P81019E95 Issue A Motorola MOCOM 70 Mobile25-50 Mhz 68P81008E75 Issue J Motorola MOCOM 70 Mobile 450-470 Mhz 68P81011E30 Issue F Motorola SERIES-80 Desk Top Controller (tone) 68P81043E30 Issue O Motorola Centracom Series II Plus Field PROM- 68-81121E49 Issue F Programming Software Manual for software Part No. RVN-4029 Motorola Transistorized Motorcycle Dispatcher FM Two-way Radiophone- 144-174 Mc 68P849860Issue 0 Standard C890L Mobile VHF Instruction Sheet A Standard C830L03 Portable VHF Instruction Sheet A Standard C830L05 Portable UHF Instruction Sheet A Standard 766L 35 watt UHF Mobile Standard 766L Programming Chart Manual Standard 866L VHF Mobile Standard RPTS-LMR-1 90 watt ?UHF/FM Repeater System Owner's Operating and Maintenance Manual Standard DPX-1B/3B UHF Duplexers Instruction Manual Standard MTP-4B Multiple Tone Panel Inst. Manual Standard RPT-20 UHF/FM Repeater Owner's Operating and Maintenance Manual As far as I can tell they are complete. All manuals are $10.00 each. Shipping via USPS flat-rate shipping. e-mail me at: [EMAIL PROTECTED] Thanks, Jim, K8COP
[Repeater-Builder] GE MASTR II Parts
I have some VHF and possibly of some UHF (406-420 Rxs) Cleaning the garage. Prices are very reasonable. I am located in the Muskegon, MI. area for anyone in Michigan that wants to pick up. E-mail me direct at [EMAIL PROTECTED] Thanks, Jim, K8COP
[Repeater-Builder] Re: Looking for a PL Reed
Still looking for a reed. Jim, K8COP
[Repeater-Builder] Looking for a PL Reed
Looking for a KLN6209A reed on 94.8 Hz. Or will at K10008B work in its place. Pls contact me direct at [EMAIL PROTECTED] Jim, K8COP
[Repeater-Builder] New DStar 2m Repeater in Muskegon, Mi Area
D Star voice only is now available in the Muskegon, Mi area. WD8MKGDC 147.320 + Dup I/O = C For IC 2200H users please remember to include the C at the end of the repeater callsign. This is Michigan's first DStar repeater. Check out the updated web page which should occur this afternoon with photos of the unit and the Ham's that made it happen. Web page: www.wd8mkg.com Jim, K8COP
[Repeater-Builder] GE Mastr II UHF Receiver
Thanks Jerry, will give them a call on tues. Tried to call them and their closed until the 2nd of January. 73's Jim - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, December 31, 2005 9:46 AM Subject: [Repeater-Builder] Re: GE Mastr II UHF Receiver Jim- try Brocomm in Burlington Ontario,formerly Spantek.They usually have lots of gear in that freq. range. Best 73 Jerry VE3 EXT Windsor Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Hamtronics Preamp part ID
This transistor is in a Hamtronics Pre-Selector preamp from the 80's. The number on the top of the transistor is 2369E44. Anyone know what the correct part number is, or what it is? I have tried a Goggle search and have not came up with anything. Thanks, Jim, K8COP Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Hamtronics Preamp part ID
Mike, I have tried that, and they nolonger have an instruction sheet for it. The manual listed is the newer one, not the one from the 80's. I thought they would still at least have something available. Spoke with them on the telephone and got nowhere... Jim - Original Message - From: Michael Haddix [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 11, 2005 4:42 PM Subject: Re: [Repeater-Builder] Hamtronics Preamp part ID Hi, Jim, figure out which one of the preamp/preselectors you have and then go to the Hamtronics web site and download the manual for it. The manuals are found on the bottom of the side-bar on the left of the web site. Hamtronics used mostly Philips brand of transistors, but, it depends on the particular Preselector/preamp you have. (www.hamtronics.com) Mike n9wzx --- Jim, K8COP [EMAIL PROTECTED] wrote: This transistor is in a Hamtronics Pre-Selector preamp from the 80's. The number on the top of the transistor is 2369E44. Anyone know what the correct part number is, or what it is? I have tried a Goggle search and have not came up with anything. Thanks, Jim, K8COP Yahoo! Groups Links [EMAIL PROTECTED] __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Instruction sheet--Hamtronics
Looking for the instruction sheet for a Hamtronics VHF Helical Resonator Amp. This board is not the current model listed on their web site. It appears that this one was a kit. I would say it was built in the late 80's??? I believe that the FET is popped. Does someone have a copy they could scan and e-mail me? Thanks, Jim, K8COP [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Source for RF enclos
Sounds good, I would be willing to try it, as I plan on using n connectors. Here is my e-mail address: [EMAIL PROTECTED] Thanks, Jim - Original Message - From: Joe [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 04, 2005 5:30 PM Subject: Re: [Repeater-Builder] Source for RF enclos I have used old Polyphasor surge suppressors for RF tight boxes, look at: http://www.polyphaser.com/kommerce_productdetail.aspx?item=IS-PT50HN These are 4.25 long, 2.25 wide and 1.25 deep outside dimensions. They are cast aluminum, so the inside dimensions will be less. I can't find the Hamtronics preamp I have, but I think it will fit inside. The case has 2 N female connectors, one on each end. I have a few of these around, you can have one for the postage. 73, Joe, K1ike At 09:50 AM 12/1/2005 -0500, you wrote: I have a Hamtronics LNP VHF Preselector board. I would like to install it in a RF tight box. Checked with Hamtronics and they have no such item and no advise as to where to find one. I want to install the board in a metal box and have the antenna leads come out to two female N connectors, and a 12 vdc through a feed-thru connector for power. Their is no room to install it within the receiver. Thanks, Jim, K8COP Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] MTR 2000 Repeater Intermod
Eric, I forgot to include that the station is used in the base station configuration. I have a CAT300DX hooked up to the station. I checked the code plug information, and changed the setting to PL DPL only. It was set to carrier and PL DPL. I am having the same problem with the signal coming in. Jim, K8COP - Original Message - From: Eric Lemmon [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, November 25, 2005 7:24 PM Subject: Re: [Repeater-Builder] MTR 2000 Repeater Intermod Jim, I'm quite familiar with the MTR2000, and have five of them in service. Since the rogue signal is received during the hang time, it must have a 94.8 Hz PL tone on it. Unless... are you certain that your repeater was not left in carrier squelch during testing? Another possible cause is an incorrect repeater set-up. Read the station's codeplug. Then, 1. Click on Personality in the toolbar 2. Click on Channel Information in the drop-down menu 3. Click on Repeater in the Option window 4. Select Carrier PL/DPL for BOTH Analog Activation and Analog Hold-in 5. Select Off for Analog Deactivation If the above steps do not alter the symptoms, please send me your *.pcf file for examination. 73, Eric Lemmon WB6FLY Jim, K8COP wrote: We're experiencing a problem with our new Motorola MTR 2000 Repeater. The repeater is on 146.22/82. PL of 94.8 Hz. When a station is using the repeater, and just when they unkey, we end up with a signal that is on 155.490 (PL 107.2) comes through the receiver. The 155.490 frequency is used by our local Law Enforcement Dispatch. This does not happen every time, but intermittent. Their repeater is also a Motorola MTR 2000. The repeaters are about 4 to five miles apart. The Ham repeater has been totally checked out. It has a new duplexer, intercabling, 7/8 hardline. The 6 dB gain stationmaster antenna was not replaced. The SWR was checked and is OK. I am open for ideas on this one. Jim Duram, K8COP Whitehall, MI. Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Source for RF enclos
I have a Hamtronics LNP VHF Preselector board. I would like to install it in a RF tight box. Checked with Hamtronics and they have no such item and no advise as to where to find one. I want to install the board in a metal box and have the antenna leads come out to two female N connectors, and a 12 vdc through a feed-thru connector for power. Their is no room to install it within the receiver. Thanks, Jim, K8COP Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Source for RF enclosures
A thanks to all that replied to my request for information on RF enclosures. Jim, K8COP Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] MTR 2000 Repeater Intermod
Laryn, What intermod program would you suggest? Jim, K8COP - Original Message - From: Laryn Lohman [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Saturday, November 26, 2005 1:24 AM Subject: [Repeater-Builder] Re: MTR 2000 Repeater Intermod Since you are hearing it on the unkey, it is a signal on your input with no PL or the wrong PL. Are you hearing 155.49 audio mixed with another station?? I'd run an intermod program and see if you get a hit on your input. Laryn K8TVZ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] MTR 2000 Repeater Intermod
Hi Eric, Thanks for the reply. I will check the settings this weekend, and post the results. Thanks, Jim, K8COP Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] MTR 2000 Repeater Intermod
Were experecing a problem with our new Motorola MTR 2000 Repeater. The repeater is on 146.22/82. PL of 94.8 Hz. When a station is using the repeater, and just when they unkey, we end up with a signal that is on 155.490 (PL 107.2) comes through the receiver. The 155.490 frequency is used by our local Law Enforcment Dispatch. This does not happen every time, but intermittent. Their repeater is also a Motorola MTR 2000. The repeaters are about 4 to five miles apart. The Ham repeater has been totally checked out. It has a new duplexer, intercabling, 7/8 hardline. The 6 db gain stationmaster antenna was not replaced. The SWR was checked and is OK. I am open for ideas on this one. Jim Duram, K8COP Whitehall, MI. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/