Re: [Repeater-Builder] Re: Anyone get RSS for MT1000 to run on a Dell M70 in DOS?
check http://www.dosbox.com/ works for me in all machines.. 73 On 29-03-2010 11:21, Kris Kirby wrote: On Mon, 29 Mar 2010, Fuggitaboutit wrote: there was all this talk about the old uarts in the older machines which i dont really believe if you can get the sofare to run in a dos box then great it wouldnt matter how new the machine hardware software is the spectra radio here works but the grief i would have to go through to get the radio to communicate with anything is not worth my time The problem is that the timing loops associated with serial communication in that software run too fast on modern hardware, causing the software to try to talk to the radio faster than the radio is capable of writing to its firmware. i386 virtual machines are great, but it is possible to have something execute in that virtual machine at 2+ GHz today. -- Kris Kirby, KE4AHR Disinformation Analyst
[Repeater-Builder] R100 TX power Help
Hi Guys, I'm newbie in this list and I need help... I'm trying to reprogramming a MCR100 (MAL43XXX series ) to a 2m repeater: 1) I Have change all the frequency data with the r100 software with success; 2) I have tune the RX VCO (L201) to a maximum of 4.35 Volts DC (The motorola manual claims to be 7.0V DC) but it's working :-); 3) I have tune the TX VCO to a maximum of 7.40 Volts and the repeater TX seems to work but with only a few milliwatts of output... Yes, The problem is the power!:-( I have turn the R463,R453 and R455 to full power (CW) but it doesn't I have 1.984 Volts DC max in R463(test point CV) (and R477 too) What I have miss? I don't find any more tuning procedures in the motorola service manual... Any help would be fully appreciated.. 73 Carlos