[Repeater-Builder] Re: Fs: (/\/\)otorola UHF Desktrac
Um Ok, I want this gone. Tried swapping it, and selling it so how low do i have to go before someone will bite. not that i will necessarily let it go extremely cheap, but i am just curious about how low i have to go to get it sold. also want to know the reasoning of why it is so hard to get it sold since GMRS and Ham are still wideband. i will also toss in a small cushcraft uhf ringo as well. again will swap to a rebandable p25 mobile scanner or ??? here are pic's http://img405.imageshack.us/i/sales8910018.jpg/ http://img188.imageshack.us/i/sales8910017.jpg/ http://img842.imageshack.us/i/sales8910016.jpg/ http://img683.imageshack.us/i/sales8910015.jpg/ http://img706.imageshack.us/i/sales8910021.jpg/
[Repeater-Builder] Fs: (/\/\)otorola UHF Desktrac
Motororola uhf desktac on 462.600/467.600 40 watts. good condition. bench tested and tuned by motorola tech. should go down to ham with no problem. $600.00 + s/h motorola t- 4 cavity bpbr duplexer $250.00 + s/h, 150ft andrew 1/2 inch hardline $100.00 local p/u take all for $900.00 Paypal, usps money order, or local p/u with cash in 35405
[Repeater-Builder] Re: Fs: (/\/\)otorola UHF Desktrac
--- In Repeater-Builder@yahoogroups.com, kc8gpd kc8...@... wrote: Motororola uhf desktac on 462.600/467.600 40 watts. good condition. bench tested and tuned by motorola tech. should go down to ham with no problem. $600.00 + s/h motorola t- 4 cavity bpbr duplexer $250.00 + s/h, 150ft andrew 1/2 inch hardline $100.00 local p/u take all for $900.00 Paypal, usps money order, or local p/u with cash in 35405 Will trade the UHF Desktrac Only to a Uniden BCD996T or BCD996XT P25 mobile/Base Scanner
[Repeater-Builder] Test
seems to be a long delay between posting messages and them showing up.
[Repeater-Builder] Add removable antenna connector to older motorola DTR's
i have an older set of dtr's with the non removable antenna. i would like to add an sma jack to them so they are compatible with motorola 1/4 wave or 1/2 wave ht antenna's. i hate stubby antenna's. ht antenna's are compromised to begin with and stubby antenna's only make things worse.
[Repeater-Builder] Some equipment for sale Motorola P200, P110 UHF, P110 VHF, GE mobile and s550
P200 H44RFU7160BN P200 H44RFU7160BN P110 P43QLC20E2AA P110 P23QLC00A2AA GE Mobile Comb# N3UU2N100ZA 2 S550 Control Heads, 2 Mic's, 2 Brackets Best Offer Plus Shipping I am also looking for a OEM Low Power Analog Spectra Programming Cable (Rib to Radio). No Batteries, antenna's or chargers with portables no cables for the GE GE can be modded for Front Panel Programming using the S990 Control Head. http://www.mindspring.com/~dchopper/s990/ I am located in Tuscaloosa Alabama and prefer to deal locally but will ship.
[Repeater-Builder] Fs: Standard GX3000 UHF, GE MPI UHF Portables/Parts, Centracom II Desktop
Centracom II Desktop and Manuals No CEB Box of UHF MPI portables/parts Standard GX3000 Mobile UHF Make offer Plus Shipping again prefer to deal locally but willing to ship. also looking for OEM low power analog spectra rib to radio cable. also still looking for a DB-404 or DB-408 for my planned GMRS Repeater. Located in Tuscaloosa Alabama
[Repeater-Builder] Motorola T1504A Duplexer Lock Nut
Hi, Does any one in the groups have on of these in their junk box that they don't need? I took my duplexer to get tuned only to realize that some genius thought that duct tape was a suitable replacement for a proper lock nut on one of the cans. he did the tuneup on the duplexer as best he could. after i locate a nut i would love it if their are any local hams with the capability to give it that final tweak as i am sure that one can is out of spec. thanks, robert kc8gpd
[Repeater-Builder] Re: Motorola T1504A Duplexer Lock Nut
I should have noted that i have moved from the jersey location to the tuscaloosa, al area. also if there is a ham club as well who wants to host a gmrs repeater, it would be open to suitably licensed members of the club.
[Repeater-Builder] Re: Those PGE Smart Meters (again)
And the Agent told me they can easily track energy consumption with time of day. i have always had a problem with this. it eventually leads prices based on the time of day you use energy. as if they don't gouge you enough already they want more for usage during certain times of the day.
[Repeater-Builder] fs: ft: UHF PD Stationmaster , swap to 3 or 5 db repeater antenna
will swap to a fiberglass 3 or 5 db colinear on gmrs. or best offer. i have no info other then it was on a paging site in stroudsburg. it is not shippable and you are welcome to come sweep the antenna and check it out. was going to use it for my gmrs setup. it has to go because i am moving and cant take it with me. i live in 08826.
[Repeater-Builder] Re: GMRS Repeater Project Progress
I now have a Pass/Reject Duplexer Coming To me for my GMRS Project. A nice guy from the forums here is swapping one to me for my LPB 8ch mono broadcast board. but due to the fact i may be moving to alabama soon, it will be official on dec. 1st. the repeater obviously will not be in the hunterdon county area now. I will be going to City of Tuscaloosa in alabama so i will be searching for a free host in that area. Guess having a Pass/Reject Duplexer will now allow me to colo the repeater on a tower site.
[Repeater-Builder] GMRS Repeater Project Progress
Got a Motorola Desktrac, 150 ft 1/2 inch hardline, PD Station Master, Surge Arrestor, LMR 400 Jumpers, 6 Cavity Notch Duplexer. I have will over on batlabs tuning up the duplexer and recapping/aligning my spectra's, and re aligning my sabers. i am thinking that i will turn the power down on the desktrac to 10-15 watts. still don't have a GMRS license or a site for the repeater.
[Repeater-Builder] acssb - how does it work and is it possible for the hobbyist to scratch build
basically as the title states. i have never heard of acssb outside of 220-222 mhz. seems to me acssb was a good idea and was curious as to why the ham community has not picked up on it for mobile HF SSB use. seems to me having the benefits of SSB without the hassle of messing with a clarifier all the time has it's advantages in a mobile environment. also it seems running a AOR ARD9000 type device over ACSSB would be a really great advantage. i have zero experience with either of these modes so i am not sure how this idea would turn out. i know that the likely reason is NBFM and P25 for the demise of ACSSB, but as stated above seems to me it would be at home in the HF spectrum. I know i am going to get flamed for this, but i think ACSSB would make a great replacement for standard ssb in the 11 meter market. it would also allow the use of CTCSS on HF using a more efficient mode then FM. imagine haveing ACSSB 10 meter repeaters instead of FM.
[Repeater-Builder] Racal MA4258B Voice Scrambler Sp/Mic - Need Info
Any info on these? Schematics, Manuals, Connector Pin Out, Etc. What is the Fill (1/16 TRS) Jack? There is also a unmarked 1/8 TRS jack any ideas? there is a 4 position switch on top what is it for? These are Very Heavy and well built. also what is the encryption type rolling inversion, fixed inversion or DES? i'm assuming it is not DES though as i believe DES requires being tapped before de emphasis to operate properly? Can these be used in modes other than FM? such as AM or SSB? here is the auction i won with pic's of the mic's http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=220460530356ssPageName=STRK:MEWNX:IT
[Repeater-Builder] Need a UHF BpBR Duplexer on 462/467.600 pair
I have a Kenwood TK-760-1 Mobile, a KMC-9 Deskmic, and a SEC-1223 power supply to trade for one set on my pair.
[Repeater-Builder] Fs: Kenwood TK760-1, Ringo II, 12V 20A PSU, Pgm Cable, Coax, Mobile Mag Mount
I have the following to go as a package. Kenwood TK-760-1 Kenwood KMC-9 SEC 1223 12v 20a power supply Cushcraft ARX-2b Ringo Ranger II RG-8 Coax 2 brand new pl-259 Larsen NM-150 5/8 wave Mag Mount Mobile $275.00 + Shipping
[Repeater-Builder] Re: Fs: Kenwood TK760-1, Ringo II, 12V 20A PSU, Pgm Cable, Coax, Mobile Mag Mount
also Comes with after market serial program cable.
[Repeater-Builder] complete kenwood vhf base setup
Kenwood TK-760-1 VHF 144-174 MHz, 32ch, 25 Watt, Mobile Mounting Bracket Programming Cable and Software Kenwood KMC-9 Desk Mic SEC 20 Amp 12 volt low profile regulated power supply 50 ft rg8 2 x pl259 teflon/silver Cushcraft Ringo Ranger II ARX-2b $275.00 + Shipping
[Repeater-Builder] Swap VHF Master 300 Watt Repeater for motorola gear or take $75.00 Cash
local p/u in 08826 no controller, duplexer, or rack cabinet. any synthesized moto gear considered, but my preference is the saber, astro saber, spectra, astro spectra, and syntor X9000 series radios. please be sure your offers for trade have had the leaky caps replaced and the radios aligned to spec. one thing i'm looking for is an A5 UHF Low Power Spectra that has had the electrolytic's replaced and aligned to spec and a low power programming cable. or a pair of 900 MHz FHSS DTR series portables with VOX headsets, and accessories. thanks, rev. chrysafis
[Repeater-Builder] Re: fs/ft: GE Mastr (Pro?) 300 Watt Repeater
Best Offer or Trade for Ham Gear, Commercial Gear or RF Test Equipment. email with your offer.
[Repeater-Builder] fs/ft: GE Mastr (Pro?) 300 Watt Repeater
It's not in a Rack, but i have all the modules, cables, and manual. on 145.270 out 144.670 in i believe 67.0 Hz PL. I don't know much about it other then the guy i got it from abandoned using it because he could never get it to work right through echolink. he bough a hamtronics. i think the problem was he was using a PC based repeater controller. any way i'd be willing to swap to a Part 95a Type accepted Repeater. Looking for continuous duty, 50 watt, and duplexer, crystal or synthesized. or $400.00 Cash. located in 08826
[Repeater-Builder] Re: Fs: Hamtronics UHF Repeater Duplexer $700.00 - CNJ
Hi All, I have decided to keep the repeater, get my GMRS license and put it up on the 675 pair. --- In Repeater-Builder@yahoogroups.com, Rev. Robert P. Chrysafis [EMAIL PROTECTED] wrote: Hi Group, I'm selling a Hamtronics REP-100, 700mW Repeater, CSI TP-38 Tone Panel, 45 Watt Amplifier Deck, Phelps Dodge (4 cavity, I Think) UHF Duplexer, GE Power Supply, all mounted in a 2ft high rack cabinet. I'm asking $700.00. all presently tuned to 462.675 Tx / 467.675 Rx. I have manuals for the REP-100 and TP-38. the REP100 contains a RA-451 Receiver, TA-451 Transmitter, and I believe Helical Filtering (not positive). pickup in eastern central NJ. Payment is Cash with local pickup. Thank You, Rev. Robert P. Chrysafis Universal Life Ministries (ULC) http://www.ulc.org Licensed Amateur Radio Operator: kc8gpd Location: Glen Gardner, NJ 08826 Moderator: http://groups.yahoo.com/groups/Hunterdonfree Owner: http://groups.yahoo.com/groups/FreeStuffWarrenNJ
[Repeater-Builder] Re: looking to trade for a db-408 or db-420 for GMRS
Glen Gardner, NJ 08826 --- In Repeater-Builder@yahoogroups.com, Maire-Radios [EMAIL PROTECTED] wrote: where are you at? - Original Message - From: kc8gpd To: Repeater-Builder@yahoogroups.com Sent: Friday, November 07, 2008 7:37 AM Subject: [Repeater-Builder] looking to trade for a db-408 or db-420 for GMRS i have various computer and radio gear. i'm trying to put up a 675 pair gmrs repeater at my xyl's parents place. i got a hamtronics repeater with a pass-reject duplexer and a tp-38. it's running 45 watts. i got it for $400.00, but i'm still making payments to the guy so i'm a little cash poor right now.
[Repeater-Builder] looking to trade for a db-408 or db-420 for GMRS
i have various computer and radio gear. i'm trying to put up a 675 pair gmrs repeater at my xyl's parents place. i got a hamtronics repeater with a pass-reject duplexer and a tp-38. it's running 45 watts. i got it for $400.00, but i'm still making payments to the guy so i'm a little cash poor right now.
[Repeater-Builder] Fs: Hamtronics UHF Repeater, CSI TP-38 PD Duplexer $700.00
I'm selling a Hamtronics REP-100, 700mW Repeater, CSI TP-38 Tone Panel, 45 Watt Amplifier Deck, Phelps Dodge UHF Duplexer, GE Power Supply, all mounted in a 2ft high rack cabinet. I'm asking $700.00. all presently tuned to 462.675 Tx / 467.675 Rx. I have manuals for the REP-100 and TP-38. the REP100 contains a RA-451 Receiver, TA-451 Transmitter, and I believe Helical Filtering (not positive). pickup in eastern central NJ. Payment is Cash with local pickup. Thanks, Robert kc8gpd