[Repeater-Builder] Re: CT Model 3000B Service Monitor
--- In Repeater-Builder@yahoogroups.com, n3gh_1 [EMAIL PROTECTED] wrote: I have this service monitor that I no longer need. If anyone is interested please contact me off the list. Pictures are available. Thanks N3GH George DESCRIPTION The 3000B Communications Service Monitor is a compact, lightweight (25lbs) service monitor or testing FM and AM transceivers. Frequency range is 400KHz to 1000MHz in 100Hz steps. Has an audio synthesizer which permits generation of sub-audible tones and timed tone bursts. In receive mode, an internal counter displays frequency error, modulation frequency or received sub-audible tone frequency. RF voltage level is continuously variable from 0.03 µV RMS to 316 mVRMS. An internal CRT display shows modulation waveform and relative signal strength. An analog meter reads modulation and SINAD. Has an internal load to protect it from accidental keying. Asking $800 or B/O,, last chance before ebay. Thanks N3GH George
[Repeater-Builder] CT Model 3000B Service Monitor
I have this service monitor that I no longer need. If anyone is interested please contact me off the list. Pictures are available. Thanks N3GH George
[Repeater-Builder] Re: Zetron 38A Manual
Eric, Take a look under files, directory Zetron, on this site. I have copied from my manual the schematics you describe. Let me know if you find anything missing from them. 73, N3GH George --- In Repeater-Builder@yahoogroups.com, Eric Lemmon [EMAIL PROTECTED] wrote: We're still not home yet- the copies of the schematics on the link shown below do not overlap, so there is a data gap at that point. Please, if someone has the original paper copies of the schematics, take them to a Kinko's or a commercial graphics shop and have them scanned as 11 by 17 sheets directly into PDF. If that is too much trouble, please contact me directly at mycall at verizon dot net. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Mike Morris WA6ILQ Sent: Tuesday, July 29, 2008 9:57 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: Zetron 38A Manual Look on http://www.repeater-builder.com/zetron/zetron-index.html http://www.repeater-builder.com/zetron/zetron-index.html The Zetron 38a manual and schematics are there. Mike WA6ILQ At 05:36 PM 07/29/08, you wrote: Tim, Did you ever get the schematics for the Zetron 38a? I have them in PDF files and can email them to you. Let me know. N3GH George --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , m0hlm m0hlm@ wrote: Hi I got the Manual incl. scematic, diagram, for diffrent Zetron Logics .send me an email M0HLM@ --- In Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com , Scott Zimmerman n3xcc@ wrote: I apologize. I didn't realize that the PDF had blank pages. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 - Original Message - From: Mike Morris WA6ILQ To: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com Sent: Friday, April 25, 2008 1:52 AM Subject: Re: [Repeater-Builder] Zetron 38A Manual Yep, he did. The schematics pages in that PDF file are blank (unfortunately it's all we have). A good example of Zetron customer service at its best. I've heard it from several people - they buy Zetron, they shelve the manual. Several years later the unit needs repair - maybe they zap a COR input, or something. They pull the manual off the shelf, and the schematics are blank. Unhappy customers tend to make later purchases elsewhere. Mike At 12:06 PM 04/24/08, you wrote: Doesn't anyone check the website or do a google search anymore?? http://www.repeater-builder.com/zetron/zetron-model-38a-inst% http://www.repeater-builder.com/zetron/zetron-model-38a-inst% 20manual-025-9043y.pdf Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Jack Davis To: Repeater-Builder@yahoogroups.com mailto:Repeater-Builder%40yahoogroups.com Sent: Wednesday, April 23, 2008 11:24 PM Subject: [Repeater-Builder] Zetron 38A Manual Does anyone have the schematics for a Zetron Model 38A repeater controller? The pages are blank in my manual and I need to fix it. Thanks, Jack K6YC -- --- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.2/1389 - Release Date: 4/21/2008 8:34 AM -- --- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.5/1399 - Release Date: 4/26/2008 2:17 PM Yahoo! Groups Links
[Repeater-Builder] Re: Zetron 38a Schematics
Bob, OK , I give up! What important information is missing? I have reviewed my manual and didn't find any other schematics. There are some program log sheets if anyone wants those I can post those as well. 73, N3GH George --- In Repeater-Builder@yahoogroups.com, Bob M. [EMAIL PROTECTED] wrote: That's like totally great news, dude! One very important piece of information missing, however. Bob M. == --- On Tue, 7/29/08, n3gh_1 [EMAIL PROTECTED] wrote: From: n3gh_1 [EMAIL PROTECTED] Subject: [Repeater-Builder] Zetron 38a Schematics To: Repeater-Builder@yahoogroups.com Date: Tuesday, July 29, 2008, 8:45 PM Greetings All! I have uploaded PDF files of schematics for the Zetron 38A controller. Have fun! 73, N3GH George
[Repeater-Builder] Re: Zetron 38A Manual
Tim, Did you ever get the schematics for the Zetron 38a? I have them in PDF files and can email them to you. Let me know. N3GH George --- In Repeater-Builder@yahoogroups.com, m0hlm [EMAIL PROTECTED] wrote: Hi I got the Manual incl. scematic, diagram, for diffrent Zetron Logics .send me an email [EMAIL PROTECTED] --- In Repeater-Builder@yahoogroups.com, Scott Zimmerman n3xcc@ wrote: I apologize. I didn't realize that the PDF had blank pages. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 - Original Message - From: Mike Morris WA6ILQ To: Repeater-Builder@yahoogroups.com Sent: Friday, April 25, 2008 1:52 AM Subject: Re: [Repeater-Builder] Zetron 38A Manual Yep, he did. The schematics pages in that PDF file are blank (unfortunately it's all we have). A good example of Zetron customer service at its best. I've heard it from several people - they buy Zetron, they shelve the manual. Several years later the unit needs repair - maybe they zap a COR input, or something. They pull the manual off the shelf, and the schematics are blank. Unhappy customers tend to make later purchases elsewhere. Mike At 12:06 PM 04/24/08, you wrote: Doesn't anyone check the website or do a google search anymore?? http://www.repeater-builder.com/zetron/zetron-model-38a-inst% 20manual-025-9043y.pdf Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 - Original Message - From: Jack Davis To: Repeater-Builder@yahoogroups.com Sent: Wednesday, April 23, 2008 11:24 PM Subject: [Repeater-Builder] Zetron 38A Manual Does anyone have the schematics for a Zetron Model 38A repeater controller? The pages are blank in my manual and I need to fix it. Thanks, Jack K6YC --- --- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.2/1389 - Release Date: 4/21/2008 8:34 AM --- --- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.5/1399 - Release Date: 4/26/2008 2:17 PM
[Repeater-Builder] Zetron 38a Schematics
Greetings All! I have uploaded PDF files of schematics for the Zetron 38A controller. Have fun! 73, N3GH George
[Repeater-Builder] Re: Arcom RC-110 help!
Greetings All, Wanted to let everyone know that Ken was able to record a new Voice chip for me. Just got it in the mail yesterday. I have installed it and the RC 110 has come back to life. Thanks Ken, Appreciate all your help and work. Now all that is left is find a rack mount case to finish it. 73, N3GH George W3BD Repeater --- In Repeater-Builder@yahoogroups.com, Ken Arck [EMAIL PROTECTED] wrote: So all know, we've taken care of George's needs offlist. Ken -- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net We don't just make 'em. We use 'em!
[Repeater-Builder] Arcom RC-110 help!
I recently purchased a used RC-110 Controller.(all I can afford) Somehow I have messed up the voice chip output amp resulting in distorted audio. Does anyone have the capability to record the audio on a new voice chip for this unit? (thanks Ken for looking) Perhaps someone has a controller that has hardware issues with a good voice chip they will part with? I appreciate any help. Thanks 73, N3GH George W3BD repeater
[Repeater-Builder] Re: re Zetron circuit
--- In Repeater-Builder@yahoogroups.com, Mike Morris [EMAIL PROTECTED] wrote: At 04:56 AM 02/12/07, you wrote: Peter, Thanks alot. I downloaded the manual from the Repeater Builders site but the pages that show the schematic are blank. Let me know N3GH George Unfortunately we are limited to posting what we are given. If someone has the schematics, and sends them to us, we'll add them. Mike WA6ILQ assistant webmaster at repeater-builder.com Mike, My comments here were in no way a complaint. I have found alot of useful, insightful information on the Repeater-builder.com site. I am very greatful to everyone's efforts in providing such a wealth of information to us. This group has also been very helpful to me in putting together my first repeater. Thanks to All!!! N3GH George
[Repeater-Builder] Re: re Zetron circuit
Peter, Thanks alot. I downloaded the manual from the Repeater Builders site but the pages that show the schematic are blank. Let me know N3GH George --- In Repeater-Builder@yahoogroups.com, Peter Burgess [EMAIL PROTECTED] wrote: I will have a look in my collection. I seem to remember having 1 10 years ago. re above. I have found 2 manuals complete with circuit diagrams and board layouts. also has programming instructions Cheers Peter
[Repeater-Builder] Zetron 38 controller
I wondered if anyone has a schematic for the Zetron 38 controller. I have found the manual on the repeaters build site but the schematics are not visible. Thanks N3GH George
[Repeater-Builder] Re: Micor compa-station Manual
Bob, I got your copies. They look great. Thanks alot 73, N3GH George --- In Repeater-Builder@yahoogroups.com, Bob M. [EMAIL PROTECTED] wrote: I've got that exact manual and will scan the two pages and e-mail them to you. What I don't find is a photo showing the tuned components; they're present for the exciter but not for the receiver. If you have the metal shield on the receiver, I think that has the component labels on it. Bob M. == --- n3gh_1 [EMAIL PROTECTED] wrote: Wonder if anyone has a spare manual for the Micor Compa-station? P/N of the one I need is the 68P81025E50. THis has the alighment instrucgtions for the TLE8032B receiver and the TLE8023B Filter. Thanks N3GH George (W3BD Repeater) Want to start your own business? Learn how on Yahoo! Small Business. http://smallbusiness.yahoo.com/r-index
[Repeater-Builder] Micor compa-station Manual
Wonder if anyone has a spare manual for the Micor Compa-station? P/N of the one I need is the 68P81025E50. THis has the alighment instrucgtions for the TLE8032B receiver and the TLE8023B Filter. Thanks N3GH George (W3BD Repeater)
[Repeater-Builder] Re: Micor Compa station converstion
Chuck, Kevin, and Mike, Thanks alot gentlemen. I kinda figured I was going to need the test set. I have already bid for one found on ebay. Thanks for the heads up for a couple others. I just found that my manual wa assembled wrong. The 2 pages for receiver are for the high band version. Does anyone have a spare or scanned verion of those two pages for the UHF RF and IF board alignment? TLE 8032B with the TLE 8023B band passs filter. Thanks again for everyone's help. N3GH George (W3BD Repeater) --- In Repeater-Builder@yahoogroups.com, n3gh_1 [EMAIL PROTECTED] wrote: Gentlemen, Appreciate some direction. I first connected a controller and tested this unit on it's original frequency pair (460.625 Mhz +) successfully. Then I send the ICOM's out for the new amateur frequency pair (443.050 +) Mhz. Upon getting them back from Bomar in NJ I plugged them in and thought to run a quick test. Knowing I would have to realign the receiver and transmitter I still thought it would work somewhat. I was Wrong!! No transmitter output, no recieve. First question is shouldn't the unit worked well enough to receive some and transmit? Second question is the manual I have describes the alignment procedure using the Motorola test set only. Does anyone have test point descriptions for use with general test equipment? (Scope, DMM, Counter) Any help would be greatly appreciated. Thanks N3GH George (W3BD repeater)
[Repeater-Builder] Micor Compa station converstion
Gentlemen, Appreciate some direction. I first connected a controller and tested this unit on it's original frequency pair (460.625 Mhz +) successfully. Then I send the ICOM's out for the new amateur frequency pair (443.050 +) Mhz. Upon getting them back from Bomar in NJ I plugged them in and thought to run a quick test. Knowing I would have to realign the receiver and transmitter I still thought it would work somewhat. I was Wrong!! No transmitter output, no recieve. First question is shouldn't the unit worked well enough to receive some and transmit? Second question is the manual I have describes the alignment procedure using the Motorola test set only. Does anyone have test point descriptions for use with general test equipment? (Scope, DMM, Counter) Any help would be greatly appreciated. Thanks N3GH George (W3BD repeater)