[Repeater-Builder] Little duplexeur Sinclair SD-220
hia ll i have 3 ,SD-220 duplexer adjust in 152 mhz rx,157mhz tx. they are cabled for my olg GE mobile ,just like the Executive 2 . if interested send me an email. 73/s gervais ve2ckn
[Repeater-Builder] Zetron 30 Worldpatch and a Master 2 repeater ???
Hi well i wonder if someone here in the group have ever connected an Zetron 30 over the back panel with screews of the Master 2 ? if you done it,would you have some pictures? and where the cable,on wich screews it is connectedé thanks for your help 73/s gervais ve2ckn
Re: [Repeater-Builder] hy-gain 5 btv
well ,excuse me all, i just have an email i have the wrong company this is an Hustler antenna,thanks John Stevens gervais - Original Message - From: Gerald Bishop [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 07, 2003 8:07 AM Subject: RE: [Repeater-Builder] hy-gain 5 btv Hi- You can go to the Hi-Gain site and down-load the manuals -free.TKs,Jerry W8KQ From: Ve2ckn,Gervais [EMAIL PROTECTED] Reply-To: Repeater-Builder@yahoogroups.com To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] hy-gain 5 btv Date: Sun, 07 Dec 2003 00:15:11 -0500 hi all,i know it is not about radio,anyone have a copy of the manual of this hf vertical hy-gain 5 btv? if you have it send me an email direct to me please [EMAIL PROTECTED] thanks all gervais ve2ckn _ Shop online for kids' toys by age group, price range, and toy category at MSN Shopping. No waiting for a clerk to help you! http://shopping.msn.com Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Repeater-Builder] hy-gain 5 btv
hi all,i know it is not about radio,anyone have a copy of the manual of this hf vertical hy-gain 5 btv? if you have it send me an email direct to me please [EMAIL PROTECTED] thanks all gervais ve2ckn Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Identify an high Split master Pa ??
hi, i install a pa on a Master 2 repeater Low Split Vhf of 105 watts output, i have try to balance de pa and when we begin to tune the 2 potentiometer for the matching of impedance of the natenna we hear a tone FROM the transmit audio of the Master 2. The duplexer ,6 cans Dodge is in excellnt state and tune at more of 100 db reject ,receiver and transmetter of the Master 2are well tune . So i am beginning to suspect the Pa,where should i look to know if this is in fact an HIGH SPLIT PA . thanks for the info,if you have any picture on the parts that would confurm a LOW SPLIT PA send it to me 73/s gervais,ve2ckn Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Identify an high Split master Pa ??
well lee, i have a manual here that was useful to setup the repeater,receive and transmitt. well for the pa what it gave me an headache is that it transmit during some minutes at 80 watts and suddently began to make sound in the transmit audio. i will read the manual tomorrow night ,part PA . is there anyway Lee ,high and low split's pa in Master2,should i look for some numbers written somewhere ? i may work on it all wek long and do nothing if it is not built for 145 + and _ mhz Gervais - Original Message - From: Lee Williams To: Repeater-Builder@yahoogroups.com Sent: Tuesday, November 25, 2003 8:49 PM Subject: Re: [Repeater-Builder] Identify an high Split master Pa ?? The two blue pots are for setting the power control protection circuit and needs to be tuned to the procedure in the manual. If this is a continuous duty pa,it has two air variable capacitors on the tuneable output filter which also should be tuned according to the book. Mis-adjusting them will cause problems. A manual is a must-have ! 73,Lee,N3APP - Original Message - From: gervais,ve2ckn To: Repeater-Builder@yahoogroups.com Sent: Tuesday, November 25, 2003 8:00 PM Subject: [Repeater-Builder] Identify an high Split master Pa ?? hi, i install a pa on a Master 2 repeater Low Split Vhf of 105 watts output, i have try to balance de pa and when we begin to tune the 2 potentiometer for the matching of impedance of the natenna we hear a tone FROM the transmit audio of the Master 2. The duplexer ,6 cans Dodge is in excellnt state and tune at more of 100 db reject ,receiver and transmetter of the Master 2are well tune . So i am beginning to suspect the Pa,where should i look to know if this is in fact an HIGH SPLIT PA . thanks for the info,if you have any picture on the parts that would confurm a LOW SPLIT PA send it to me 73/s gervais,ve2cknYour use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Identify an high Split master Pa ??
- Original Message - From: Ralph Mowery [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, November 25, 2003 9:43 PM Subject: Re: [Repeater-Builder] Identify an high Split master Pa ?? hi, i install a pa on a Master 2 repeater Low Split Vhf of 105 watts output, i have try to balance de pa and when we begin to tune the 2 potentiometer for the matching of impedance of the natenna we hear a tone FROM the transmit audio of the Master 2. The duplexer ,6 cans Dodge is in excellnt state and tune at more of 100 db reject ,receiver and transmetter of the Master 2 are well tune . So i am beginning to suspect the Pa,where should i look to know if this is in fact an HIGH SPLIT PA . What potentiometers are you turning for a match ? The ones I am thinking of are for SWR protection and not for matching to the antenna. They are near the back of the amplifier board. Some amps do have matching capacitors on a board to the right of the main amplifier board. Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
