[Repeater-Builder] RBI-1 Problem
My RBI-1 was working. Now what ever command you ask it to doit jumps the frequency of the radio 15kc. Reset does not help. trying to even change the power setting only causes the RBI kenwood receiver to go up 15kc. Every command sent just compounds the display frequency by 15kc. When a reset is done it goes through its dance and looks ok there. Has anyone ever experienced this problem and know what the cure is??? Thank you
Re: [Repeater-Builder] RBI-1 Problem
Wrong channel stepping on the radio it is connected to? On Wed, Mar 3, 2010 at 2:08 PM, gibsn406 gibsn...@yahoo.com wrote: My RBI-1 was working. Now what ever command you ask it to doit jumps the frequency of the radio 15kc. Reset does not help. trying to even change the power setting only causes the RBI kenwood receiver to go up 15kc. Every command sent just compounds the display frequency by 15kc. When a reset is done it goes through its dance and looks ok there. Has anyone ever experienced this problem and know what the cure is??? Thank you Yahoo! Groups Links
Re: [Repeater-Builder] RBI-1 Problem
At 3/3/2010 13:08, you wrote: My RBI-1 was working. Now what ever command you ask it to doit jumps the frequency of the radio 15kc. Reset does not help. trying to even change the power setting only causes the RBI kenwood receiver to go up 15kc. Every command sent just compounds the display frequency by 15kc. When a reset is done it goes through its dance and looks ok there. Has anyone ever experienced this problem and know what the cure is??? Maybe a long shot, but check the modular connector that plugs into the RBI-1. Mine was bad, causing the radio to do weird things in general; a replacement from DHE fixed it. Try pushing the cable into the connector while controlling see if anything different happens. AFAIK there is no way that the data stream from the repeater controller could be corrupted in such a way so as to cause the problem you're having, so the problem is likely either in the RBI-1, radio cable, or radio. Bob NO6B
