[Repeater-Builder] Re: MRS2000 VHF Channel element wanted
Hi! I would like to get a Receive Channel Element for a MSR2000 that will tune to 146.00MHZ range. The KXN-1086a channel element will easily operate at 146.00, you need only supply the crystal and carefully solder it to the proper inside location. A KXN-1086a that works at 150/160 MHz should be no problama down at 146 MHz. s.
Re: [Repeater-Builder] Re: MRS2000 VHF Channel element wanted
Where can I get 1 ?? Larry Taylor KF6JBG Home: cvrcsoaring (AT) earthlink (Dot) net RC Club: www.cvrcsoaring.com - Original Message - From: skipp025 To: Repeater-Builder@yahoogroups.com Sent: Monday, July 12, 2010 11:18 PM Subject: [Repeater-Builder] Re: MRS2000 VHF Channel element wanted Hi! I would like to get a Receive Channel Element for a MSR2000 that will tune to 146.00MHZ range. The KXN-1086a channel element will easily operate at 146.00, you need only supply the crystal and carefully solder it to the proper inside location. A KXN-1086a that works at 150/160 MHz should be no problama down at 146 MHz. s.
[Repeater-Builder] Re: mrs2000
I'm not sure, i will have to check tomorrow when i get to work. How do you get sofeware updates? --- In Repeater-Builder@yahoogroups.com, Chris Carruba chris.carr...@... wrote: It means you need a higher software version RSS What version are you using? Best Regards, Chris Carruba Co-Admin irc.spidernet.org CompuTec Data Systems Custom Written Software, not all software is created equal! Networking, Forensic Data Recovery From: Randy rwrodger...@... To: Repeater-Builder@yahoogroups.com Sent: Sun, May 16, 2010 7:50:46 PM Subject: [Repeater-Builder] mrs2000 I'm trying to program a mrs2000 radio through the mic connector with ms dos, this is a trunk mounted radio with remote head, the code plug down loads to the pc but has a message that says the code plug is too new for this application. what does this mean? other employees say that they have programmed these radios in the past with this pc with dos.
Re: [Repeater-Builder] Re: mrs2000
What's an MRS2000 ? (from the subject line) As to the Code Plug Too New message go here: http://www.repeater-builder.com/motorola/rss/rss-index.html and read the Background Information I article. At 01:12 PM 05/16/10, you wrote: I'm not sure, i will have to check tomorrow when i get to work. How do you get sofeware updates? --- In Repeater-Builder@yahoogroups.com, Chris Carruba chris.carr...@... wrote: It means you need a higher software version RSS What version are you using? Best Regards, Chris Carruba Co-Admin irc.spidernet.org CompuTec Data Systems Custom Written Software, not all software is created equal! Networking, Forensic Data Recovery From: Randy rwrodger...@... To: Repeater-Builder@yahoogroups.com Sent: Sun, May 16, 2010 7:50:46 PM Subject: [Repeater-Builder] mrs2000 I'm trying to program a mrs2000 radio through the mic connector with ms dos, this is a trunk mounted radio with remote head, the code plug down loads to the pc but has a message that says the code plug is too new for this application. what does this mean? other employees say that they have programmed these radios in the past with this pc with dos.
[Repeater-Builder] Re: mrs2000
Sorry chris i ment it's a mcs2000, thanks for link! --- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ wa6...@... wrote: What's an MRS2000 ? (from the subject line) As to the Code Plug Too New message go here: http://www.repeater-builder.com/motorola/rss/rss-index.html and read the Background Information I article. At 01:12 PM 05/16/10, you wrote: I'm not sure, i will have to check tomorrow when i get to work. How do you get sofeware updates? --- In Repeater-Builder@yahoogroups.com, Chris Carruba chris.carruba@ wrote: It means you need a higher software version RSS What version are you using? Best Regards, Chris Carruba Co-Admin irc.spidernet.org CompuTec Data Systems Custom Written Software, not all software is created equal! Networking, Forensic Data Recovery From: Randy rwrodgers14@ To: Repeater-Builder@yahoogroups.com Sent: Sun, May 16, 2010 7:50:46 PM Subject: [Repeater-Builder] mrs2000 I'm trying to program a mrs2000 radio through the mic connector with ms dos, this is a trunk mounted radio with remote head, the code plug down loads to the pc but has a message that says the code plug is too new for this application. what does this mean? other employees say that they have programmed these radios in the past with this pc with dos.
Re: [Repeater-Builder] Re: mrs2000
Why, of course, it's what's found on the other side of the combiner from the MR2000. ;^) - Original Message - From: Mike Morris WA6ILQ To: Repeater-Builder@yahoogroups.com Sent: Sunday, May 16, 2010 2:32 PM Subject: Re: [Repeater-Builder] Re: mrs2000 What's an MRS2000 ? (from the subject line) As to the Code Plug Too New message go here: