Re: [Repeater-Builder] Repeater Controller ACC RC-85
Don't know who you talked to over there but here is the link for it off of their own website... http://www.link-comm.com/ftp/acc/rc85.zip On Tue, Feb 23, 2010 at 1:02 PM, felix rosasco felixp...@yahoo.com wrote: Hello to all, Any one knows where to get the Software upgrade for the controller RC-85? Linkcomm told me they don't have it. Thanks 73, Felix, KC7WVE
Re: [Repeater-Builder] Repeater controller to be used with MSF5000
- Original Message - From: Bob M. msf5kg...@yahoo.com To: msf5...@yahoogroups.com; repeater-builder@yahoogroups.com Sent: Tuesday, January 13, 2009 9:13 AM Subject: [Repeater-Builder] Repeater controller to be used with MSF5000 I'm looking for a low-cost, simple, multi-digit DTMF controller to shut an MSF5000 repeater down for legal purposes. I've run across one for under $50 but was wondering if there's something else out there that's built and ready to hook up. Function acknowledgement is not needed; if the repeater stops transmitting when I issue the appropriate command, and I can turn it back on afterwards, I'll be happy. How are you controlling your MSF5000 repeaters (for FCC-required shutdown purposes)? Are you using the repeater's input frequency for control, a separate receiver, or other method? Controller make/model/cost? Interface method (MRTI connector, junction panel DB25 connectors, other)? Thanks. Bob M. Yahoo! Groups Links
Re: [Repeater-Builder] Repeater controller to be used with MSF5000
Oops, hit the Send key waay too fast. Private reply sent instead. Ray, KB0STN
RE: [Repeater-Builder] Repeater Controller with A/D voltage readout and Control Outputs
Try the Arrcom RC-210 it has 8 I/O ports and can be expanded to 64 at least and 8 A/D inputs. You can set Meter Faces to whatever and calibrate them for your input range Rob. KS4EC Sent by Good Messaging (www.good.com) -Original Message- From: Jim Brown [mailto:[EMAIL PROTECTED] Sent: Monday, July 28, 2008 04:46 PM Eastern Standard Time To: repeater-builder@yahoogroups.com Subject:[Repeater-Builder] Repeater Controller with A/D voltage readout and Control Outputs I am looking for a controller for a commercial application that will allow control of several output relays and will allow readout on the repeater of a voltage level via voice. (As well as control the repeater) Rather than pour through all the specs on line, I thought I would query the group for suggestions for one with this capability. Thanks - Jim W5ZIT Since 1974, the award-winning Alpert JFCS has helped families of all faiths throughout most of Palm Beach County, FL, via counseling, seniors services, residences for the disabled, mentoring children, support groups and a lot more. SOLUTIONS FOR LIVING www.JFCSonline.com Please take note of our new website and E-Mail Addresses. Please update your contacts ASAP. NOTICE: This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer.
Re: [Repeater-Builder] Repeater Controller with A/D voltage readout and Control Outputs
At 7/28/2008 13:44, you wrote: I am looking for a controller for a commercial application that will allow control of several output relays and will allow readout on the repeater of a voltage level via voice. (As well as control the repeater) Rather than pour through all the specs on line, I thought I would query the group for suggestions for one with this capability. Thanks - Jim W5ZIT LinkComm: RLC-1+, RLC-DSP404 SCom: 7330 (may not support A/D readback yet, but will soon - the hardware is there firmware for it is being developed now). Bob NO6B
Re: [Repeater-Builder] Repeater/controller interconnect cable
At 10:29 AM 01/02/08, you wrote: I'm getting ready to wire up a new repeater. In the past, I have used separate wires to make up the interconnect cable between the repeater and controller (RG316 for tx and rx audio, 2 pair for PTT/COS/CTCSS). Even in expando sleeving, it's not the best. Has anyone used PC VGA monitor cable (just the cable, with new ends) for this? The one I just looked at has 4 wires plus 3 coaxes, all in a shield. /mike I'd sacrifice a couple of inches of the shielded cable and check the weave density. Locally I helped a gentleman debug a system who had done something similar. He had used no-name monitor extension cords as long as 10 feet made for KVM (Keyboard Video Mouse) systems and cut the ends off. The quality on them varied tremendously - on some the shield density resembled old Radio Shack RG58 at 16 strands per inch (i.el. you could see through it). He had cut back the outer jacket for six inches or so and put RCA connectors on (for the ACC controller) on one end, and the other end was wired into the GE-Mastr Pro chassis (which uses spade lugs on a terminal strip). Once he sorted out the loose weave cables from the tight weave cables all was well. Mike WA6ILQ
Re: [Repeater-Builder] Repeater/controller interconnect cable
n1ist wrote: I'm getting ready to wire up a new repeater. In the past, I have used separate wires to make up the interconnect cable between the repeater and controller (RG316 for tx and rx audio, 2 pair for PTT/COS/CTCSS). Even in expando sleeving, it's not the best. Tried little tiny tie-wraps? One every foot or so should make a nice litle bundle. Expando sleeving seems like it'd be a lot sloppier. Nate WY0X
Re: [Repeater-Builder] Repeater/controller interconnect cable
I like to use bands of heat shrink every few inches. On Jan 2, 2008, at 7:13 PM, Nate Duehr wrote: n1ist wrote: I'm getting ready to wire up a new repeater. In the past, I have used separate wires to make up the interconnect cable between the repeater and controller (RG316 for tx and rx audio, 2 pair for PTT/COS/ CTCSS). Even in expando sleeving, it's not the best. Tried little tiny tie-wraps? One every foot or so should make a nice litle bundle. Expando sleeving seems like it'd be a lot sloppier. Nate WY0X Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller SSC 836AA
anpap wrote: Hello all, Does anyone have a manual or information on an SSC 836AA repeater controller? It also has the following on the PCB: T-A2-1761-4 if it makes any difference... Was this in the Tait station you mentioned? I ask because I think this is not a repeater controller, but a tone or DC remote panel. SSC did make various remotes, not sure if they're still around or not. And I remember 836AA was one of their model numbers for either a tone or DC remote. -- Jim Barbour WD8CHL
Re: [Repeater-Builder] Repeater Controller SSC 836AA
anpap wrote: Hello all, Does anyone have a manual or information on an SSC 836AA repeater controller? It also has the following on the PCB: T-A2-1761-4 if it makes any difference... Also, has anyone configured a TAIT T800 Base Station/repeater for use as a repeater? thanks, Andreas - 5B8AP Andreas, The Tait T800 can be configured to be a stand alone repeater with drop delay and time out timer without any external equipment. It would not have an identifier though. The internal and external jumpers required for internal repeat mode are shown in the manual. Connecting one to an external controller is pretty straight forward if you have a manual (needed for alignment anyway) to properly configure the internal jumpers. The T800s came in a Series I (EPROM programmable) and Series II (internal micro-controller that is PC programmable). Ed Yoho WA6RQD
Re: [Repeater-Builder] Repeater Controller Recommendations
[EMAIL PROTECTED] wrote: Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) 2. It has to talk, beep and chirp. 3. It has to have a phone patch. 4. Well supported. 5. Reliable. 6. Not require re-engineering the radio. (Translation: easy installation) Feel free to add to this list. There are a bunch of good controllers out there. My recommendation is either the Arcom RC-210, as mentioned, or the S-Com 7330, which should be available very soon. Arcom also has an RC-810 coming, but it may be a bit higher priced then what it sounds like you/they want to spend. -- Jim Barbour WD8CHL
Re: [Repeater-Builder] Repeater Controller
On 3/20/07, Sam [EMAIL PROTECTED] wrote: Do you have to use an external controller when putting 2 radios together for a repeater? I just want a simple RX TX and have the TX radio PG with a 2min TOT. There are some cables on the internet that claim all you have to do is plug and play (MOTO Radiuu 16 pin). Do they really work? Sam What service are you putting the repeater in? Amateur? Commercial? GMRS? Most services need some sort of transmitter ID to be legal. If the radios can't generate an ID, then the cross-over cable between two rigs will work as a basic repeater, but could be illegal without some form of ID. Of course, we don't even know where you are, either -- since this is an international list, so ... perhaps you're somewhere the rules are different. Also if this is your first foray into repeater building, you'll need more than just the two radios and a cable! If you're planning on duplexing those radios into the same antenna you'll need at least a duplexer... best to read up at http://www.repeater-builder.com for a while on antenna systems. This is a good starting point: http://www.repeater-builder.com/rbtip/checklist.html The majority of the cost (2x to 4x or more of the cost of the radios themselves) of a good repeater setup at a fixed location isn't in the radios at all, it's in the antenna, duplexer, isolator, bandpass cavities (if needed), and feed line... if you're doing it right. Since you're talking about using mobile rigs, be aware that most mobile rig transmitters will have to be de-rated in power by quite a bit (and probably have fans added too) to survive the 100% duty-cycle of typical repeater operation. It all depends on what you're trying to accomplish... a couple of mobile rigs can make a decent low-usage backyard low-power (and usually low performance) repeater... but with some work can perform okay. Share some more details of what you're trying to accomplish, and folks here are very helpful... most folks here can really say been there, done that - here's the best way to do what you're trying to accomplish... or at least give you two or three good options. Nate WY0X
Re: [Repeater-Builder] Repeater Controller Recommendations
At 3/19/2007 18:52, you wrote: Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) Here, essentially you get what you pay for. I consider LinkComm S-Com to be the top of the line in repeater controllers, but you'll pay a bit more, especially for the LinkComm RLC-Club, but it easily satisfies all the other requirements. 2. It has to talk, beep and chirp. Just about every controller beeps. By chirp do you mean fancy sound effects? Some of the cheaper controllers only have simple beeps won't chirp. Bob NO6B
Re: [Repeater-Builder] Repeater Controller Recommendations
On 3/21/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: 2. It has to talk, beep and chirp. Just about every controller beeps. By chirp do you mean fancy sound effects? Some of the cheaper controllers only have simple beeps won't chirp. Hahaha... I love the way you put that Bob. It won't chirp! The sound effects get old, real fast. Even a simple dual-tone ascending courtesy tone in a fast conversation can get annoying. I programmed one of our controllers on a repeater we recently worked on this way. I laughed out loud when one of our other techs who helped get it on the air commented (after about a 40 minute drive home -- using the new repeater and seeing how its coverage was working) -- I feel like I've been playing pong for half an hour! We'll probably be ... uh... removing that courtesy tone. There is really only one good purpose for the sound effects... I can tell which repeater I'm hearing, coming out of the scanner across the room! Nate WY0X
Re: [Repeater-Builder] Repeater Controller Recommendations
And if you ever need help with a CAT controllerjust call CATvery helpful and accommodating Scott - Original Message - From: Steve McCarter To: Repeater-Builder@yahoogroups.com Sent: Monday, March 19, 2007 7:11 PM Subject: RE: [Repeater-Builder] Repeater Controller Recommendations Hey Will, long time no see ;) I'll second the CAT controller route for the Chirp Beep and Talk features. We've used the CAT-1000 on one of our club machines for over a decade with little trouble. When we upgraded the other machine we bought another '1000. The '1000 would be overkill, but the CAT-300 is the lowest price product with those features (including autopatch) from catauto. If you really don't need the autopatch, however, the 200 or 250 is cheaper. Obviously there are other products on the market, and I'm sure you'll get some recommendations on those as well..Steve Here's the link to the 300: http://www.catauto.com/cat300.html Steve McCarter, KB4OID, [EMAIL PROTECTED] http://www.kb4oid.org Trustee of the PARC Repeater, W4ZBB/R on 146.79 Fort Walton Beach, FL -- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of N9WYS Sent: Monday, March 19, 2007 9:36 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Repeater Controller Recommendations Here's my 2¢ worth. My group uses a CAT-300 interfaced to a Kenwood TKR-820. I just received the EEPROM which enables the controller to be programmed via laptop computer. This means that until I install this upgrade, any changes I need to do are programmed via DTMF coding. Honestly, I can't wait until I try these new features. I will admit that initial programming of the controller was cumbersome via DTMF. Also, since I didn't build the telephone interface project box, I did it all over-the-air (at very low power). The project box allows a standard telephone to be interfaced to the controller for programming. However, since then I have not had ONE lick of trouble with the controller. It has voice interface, so it will speak your callsign and other items if you so desire, or it will send CW (or both). When I did call Tech Support via phone regarding some questions I had while setting up the controller, they were very helpful. I would recommend one to anyone looking for a reasonable controller, with some whiz bang features. wink IMHO, the only thing it lacks is a PL encode deck - an aftermarket add-on (Com-Spec) has been ordered. (If it does have one, I haven't been able to determine that via the manual.) Mark - N9WYS Repeater Trustee, WW9AE/R (444.550 PL114.8) -- From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) 2. It has to talk, beep and chirp. 3. It has to have a phone patch. 4. Well supported. 5. Reliable. 6. Not require re-engineering the radio. (Translation: easy installation) Feel free to add to this list. Thanks Will hr size=3 width=100% align=center AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.
RE: [Repeater-Builder] Repeater Controller Recommendations
Heres my 2¢ worth My group uses a CAT-300 interfaced to a Kenwood TKR-820. I just received the EEPROM which enables the controller to be programmed via laptop computer. This means that until I install this upgrade, any changes I need to do are programmed via DTMF coding. Honestly, I cant wait until I try these new features I will admit that initial programming of the controller was cumbersome via DTMF. Also, since I didnt build the telephone interface project box, I did it all over-the-air (at very low power). The project box allows a standard telephone to be interfaced to the controller for programming However, since then I have not had ONE lick of trouble with the controller. It has voice interface, so it will speak your callsign and other items if you so desire, or it will send CW (or both). When I did call Tech Support via phone regarding some questions I had while setting up the controller, they were very helpful. I would recommend one to anyone looking for a reasonable controller, with some whiz bang features. wink IMHO, the only thing it lacks is a PL encode deck an aftermarket add-on (Com-Spec) has been ordered. (If it does have one, I havent been able to determine that via the manual ) Mark N9WYS Repeater Trustee, WW9AE/R (444.550 PL114.8) _ From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) 2. It has to talk, beep and chirp. 3. It has to have a phone patch. 4. Well supported. 5. Reliable. 6. Not require re-engineering the radio. (Translation: easy installation) Feel free to add to this list. Thanks Will http://geo.yahoo.com/serv?s=97359714/grpId=104168/grpspId=1705063108/msgId= 70193/stime=1174350937/nc1=4438965/nc2=4025321/nc3=3848541 _ size=3 width=100% align=center AOL now offers free email to everyone. Find out more about what's free from AOL at http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=ht tp://www.aol.com AOL.com.
RE: [Repeater-Builder] Repeater Controller Recommendations
Hey Will, long time no see ;) Ill second the CAT controller route for the Chirp Beep and Talk features. Weve used the CAT-1000 on one of our club machines for over a decade with little trouble. When we upgraded the other machine we bought another 1000. The 1000 would be overkill, but the CAT-300 is the lowest price product with those features (including autopatch) from catauto. If you really dont need the autopatch, however, the 200 or 250 is cheaper. Obviously there are other products on the market, and Im sure youll get some recommendations on those as well .Steve Heres the link to the 300: http://www.catauto.com/cat300.html Steve McCarter, KB4OID, [EMAIL PROTECTED] http://www.kb4oid.org Trustee of the PARC Repeater, W4ZBB/R on 146.79 Fort Walton Beach, FL _ From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of N9WYS Sent: Monday, March 19, 2007 9:36 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Repeater Controller Recommendations Heres my 2¢ worth My group uses a CAT-300 interfaced to a Kenwood TKR-820. I just received the EEPROM which enables the controller to be programmed via laptop computer. This means that until I install this upgrade, any changes I need to do are programmed via DTMF coding. Honestly, I cant wait until I try these new features I will admit that initial programming of the controller was cumbersome via DTMF. Also, since I didnt build the telephone interface project box, I did it all over-the-air (at very low power). The project box allows a standard telephone to be interfaced to the controller for programming However, since then I have not had ONE lick of trouble with the controller. It has voice interface, so it will speak your callsign and other items if you so desire, or it will send CW (or both). When I did call Tech Support via phone regarding some questions I had while setting up the controller, they were very helpful. I would recommend one to anyone looking for a reasonable controller, with some whiz bang features. wink IMHO, the only thing it lacks is a PL encode deck an aftermarket add-on (Com-Spec) has been ordered. (If it does have one, I havent been able to determine that via the manual ) Mark N9WYS Repeater Trustee, WW9AE/R (444.550 PL114.8) _ From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) 2. It has to talk, beep and chirp. 3. It has to have a phone patch. 4. Well supported. 5. Reliable. 6. Not require re-engineering the radio. (Translation: easy installation) Feel free to add to this list. Thanks Will http://geo.yahoo.com/serv?s=97359714/grpId=104168/grpspId=1705063108/msgId= 70193/stime=1174350937/nc1=4438965/nc2=4025321/nc3=3848541 hr size=3 width=100% align=center AOL now offers free email to everyone. Find out more about what's free from AOL at http://pr.atwola.com/promoclk/1615326657x4311227241x4298082137/aol?redir=ht tp://www.aol.com AOL.com.
Re: [Repeater-Builder] Repeater Controller Recommendations
Take a look at the Arcom RC-210. It has all the features you mention, plus LOTS more if you want them. The controller kit fits your budget, but the chassis for it is another $100. It supports the Arcom auto patch as an option. If you don't need/want a 3 port controller, it may be more than you want. At 07:52 PM 3/19/2007, you wrote: Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham Club. They have asked me to install a talking, chirping, beeping type repeater controller (which they have offered to buy). I work with basic repeater, one each type stuff, so I have no idea where to start. I welcome any opinions of a repeater controller that meets the following somewhat carefully thought out criteria: 1. Reasonably affordable. (a couple hundred bucks or so) 2. It has to talk, beep and chirp. 3. It has to have a phone patch. 4. Well supported. 5. Reliable. 6. Not require re-engineering the radio. (Translation: easy installation) Feel free to add to this list. Thanks Will Thanks, Robin Midgett K4IDC VHF+ Glutton EM66se
RE: [Repeater-Builder]REpeater Controller
Neal, Good controller, easy to program w/software and very versatile.. I love mine! 73 Mike Perryman www.k5jmp.us -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Neal Newman Sent: Thursday, November 23, 2006 9:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]REpeater Controller Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal Yahoo! Groups Links
Re: [Repeater-Builder]Repeater Controller
[EMAIL PROTECTED] wrote: I've already breadboarded a time hack unit which marries a WWV receiver to a tone decoder. At the beginning of each hour, WWV broadcasts 800 ms of a 1500 Hz tone. I have a simple tone detector set to key the repeater when it I once tried to pick up the 10 MHz WWV signal from one of my sites. No way - far too much processor noise in the building. Not us, but another local group built a little setup that gathers up time from WWV (could be GPS nowadays) and via a vertical antenna and a modest radio at one of the tech's houses, they adjust their clocks on their controllers regularly via their control receiver frequency by simply poking a button on the device, or setting it in an automatic weekly mode. It's a microcontroller, a mobile radio, an antenna, a DTMF encoder chip (cleaner than an R2R ladder and sine-waves made from from logic pins), and a WWV receiver. Can CW ID with a DTMF tone at end of transmission, although knowing the designer he probably put a nice sine-wave CW ID in it. Fairly simple lashup. Needed someone familiar with slapping some code in a micro is about all, and that's easily done these days with both pay and free BASIC compilers for these little chips. It even had code in the micro to deal with daylight savings time, and they were joking that it's been so long since they did any changes to it, our changes to daylight savings time's start and stop dates next year will mean it needs work done on it. Nate WY0X
Re: [Repeater-Builder]Repeater Controller
At 11:22 PM 11/23/2006, you wrote: mailto:no6b%40rptrlist.w6jpl.ampr.org[EMAIL PROTECTED] wrote: I've already breadboarded a time hack unit which marries a WWV receiver to a tone decoder. At the beginning of each hour, WWV broadcasts 800 ms of a 1500 Hz tone. I have a simple tone detector set to key the repeater when it Of course, if you have an IRLP node as part of your system, it is ridiculously easy to keep the clock in your controller spot on, automatically. Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
Re: [Repeater-Builder]Repeater Controller (new)
hi mike yes you can use a2764 if u dont have a 27c64/or a 2764a/ with no probs i 2 use this in my tait so sould be ok for yours Mike Reed [EMAIL PROTECTED] wrote: I am helping the club bring an repeater back up on air, and I am working on the controller. I am trying to change the callsign in it, I have found what info I need, but my question to the group is- The controller uses a 27c64 EPROM, and all I have is 2764 types? Can I use the ones I have, or do I need to get the right one? I am new to the EPROM world, so I don't know much about them. It goes to show one is never too old to learn a new part of the hobby... 73 Mike - N7ZEF Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [Repeater-Builder]Repeater Controller (new)
At 09:21 AM 11/24/2006, you wrote: I am helping the club bring an repeater back up on air, and I am working on the controller. I am trying to change the callsign in it, I have found what info I need, but my question to the group is- The controller uses a 27c64 EPROM, and all I have is 2764 types? Can I use the ones I have, or do I need to get the right one? I am new to the EPROM world, so I don't know much about them. ---Yes Mike you can use the non-C type. (the C type is simply a low power cmos version). The one you have will draw a little more current but nothing to worry about I'm sure Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
Re: [Repeater-Builder]Repeater Controller (new)
Either *should* work. You would have to consult the data sheets but as I recall the C version is CMOS, perhaps a little less current draw and faster operation. 73 de Jack - N7OO - Original Message - From: Mike Reed To: Repeater-Builder@yahoogroups.com Sent: Friday, November 24, 2006 10:21 AM Subject: [Repeater-Builder]Repeater Controller (new) I am helping the club bring an repeater back up on air, and I am working on the controller. I am trying to change the callsign in it, I have found what info I need, but my question to the group is- The controller uses a 27c64 EPROM, and all I have is 2764 types? Can I use the ones I have, or do I need to get the right one? I am new to the EPROM world, so I don't know much about them. It goes to show one is never too old to learn a new part of the hobby... 73 Mike - N7ZEF Messages in this topic (1) Reply (via web post) | Start a new topic Messages | Files | Photos | Links | Members Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe Recent Activity a.. 22New Members b.. 1New Links c.. 3New Files Visit Your Group New Message Search Find the message you want faster. Visit your group to try out the improved message search. Share feedback on the new changes to Groups . __,
Re: [Repeater-Builder]Repeater Controller (new)
The 27C64 is a low power version of the 2764 so it depends on the design of your controller as to exactly what will happen if you try to substitute the higher power version. They are pin for pin interchangeable. Generally the high power version requires more TTL drive while it provides more drive on the output. If you have access to a UV eraser, why don't you erase the existing 27C64 and reprogram it? Digikey has the 27C64 if you think you need to go that way. I erased the EPROMs in a Tait 800 and reprogrammed them with the new frequency info. Some of the older EPROMs will erase, and you will find that some won't erase at all. You just have to give it a try. 73 - Jim W5ZIT -Original Message- From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Fri, 24 Nov 2006 11:21 AM Subject: [Repeater-Builder]Repeater Controller (new) I am helping the club bring an repeater back up on air, and I am working on the controller. I am trying to change the callsign in it, I have found what info I need, but my question to the group is- The controller uses a 27c64 EPROM, and all I have is 2764 types? Can I use the ones I have, or do I need to get the right one? I am new to the EPROM world, so I don't know much about them. It goes to show one is never too old to learn a new part of the hobby... 73 Mike - N7ZEF Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.
Re: [Repeater-Builder]REpeater Controller
Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal
RE: [Repeater-Builder]Repeater Controller
Neal, You may be referring to the Pacific Research model RI-210 repeater controller for the Vertex VXR-5000 repeater. This is a very capable controller that is made to plug into the VXR-5000, replacing the original controller. I have one in service on my GMRS repeater, and it works quite well. Don't buy it without the required software and programming cable. More information about this controller can be found here: http://www.pacres.com/products/ri-210.html It's not particularly user-friendly, but once I got all of the variables set, it's been working just fine. Its major failing, which seems to be common to every controller on the planet, is that the built-in clock drifts so much that it is useless. I am looking into using a new TAPR kit to synchronize the clock to GPS time... but that's a whole new topic! 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Neal Newman Sent: Thursday, November 23, 2006 6:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]Repeater Controller Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal
Re: [Repeater-Builder]REpeater Controller
Bottom line... They rock.. www.arcom.com I have 2 of them. You won't find a better bang for the buck. Neal Newman wrote: Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal Yahoo! Groups Links -- Jay Urish CCNANetwork Engineer http://jay.unixwolf.net 972.691.0125972.965.6229
RE: [Repeater-Builder]Repeater Controller
At 11/23/2006 08:02, you wrote: Neal, You may be referring to the Pacific Research model RI-210 repeater controller for the Vertex VXR-5000 repeater. This is a very capable Actually, he said RC-210, which is Ken Arck's controller. He much be heartily chowing down on Thanksgiving turkey to not chime in first on this query ;) set, it's been working just fine. Its major failing, which seems to be common to every controller on the planet, is that the built-in clock drifts so much that it is useless. I am looking into using a new TAPR kit to synchronize the clock to GPS time... but that's a whole new topic! It would be more cost-effective to put an 120 VAC input on the controller for the purpose of picking off the 60 Hz reference. Ever wonder why your 50 year-old AC-powered clock keeps perfect time (between power failures, anyway)? Bob NO6B
Re: [Repeater-Builder]REpeater Controller
At 06:56 AM 11/23/2006, you wrote: Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? ---Maybe you're talking about our controller? Follow the link in my signature for details and you can alway sign up for the RC210 mail list on Yahoogroups for all sorts of good info as well. Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
RE: [Repeater-Builder]Repeater Controller
Here's a link to the RC-210 that he was talking about; http://www.ah6le.net/arcom/rc210/rc210.html also look on ebay for item # 3092970014 Paul kb9wlc --- Eric Lemmon [EMAIL PROTECTED] wrote: Neal, You may be referring to the Pacific Research model RI-210 repeater controller for the Vertex VXR-5000 repeater. This is a very capable controller that is made to plug into the VXR-5000, replacing the original controller. I have one in service on my GMRS repeater, and it works quite well. Don't buy it without the required software and programming cable. More information about this controller can be found here: http://www.pacres.com/products/ri-210.html It's not particularly user-friendly, but once I got all of the variables set, it's been working just fine. Its major failing, which seems to be common to every controller on the planet, is that the built-in clock drifts so much that it is useless. I am looking into using a new TAPR kit to synchronize the clock to GPS time... but that's a whole new topic! 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Neal Newman Sent: Thursday, November 23, 2006 6:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]Repeater Controller Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com
Re: [Repeater-Builder]REpeater Controller
At 08:22 AM 11/23/2006, you wrote: Bottom line... They rock.. www.arcom.com ---Thanks Jay but that isn't our URL. http://www.ah6le.net/arcom Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
RE: [Repeater-Builder]Repeater Controller
At 08:33 AM 11/23/2006, you wrote: It would be more cost-effective to put an 120 VAC input on the controller for the purpose of picking off the 60 Hz reference. Ever wonder why your 50 year-old AC-powered clock keeps perfect time (between power failures, anyway)? ---Of if you have an ethernet connection, running an NTP client in the controller (yes, this is a hint! g) Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
RE: [Repeater-Builder]Repeater Controller
Bob, I would never think of using the 60 Hz power line to synchronize the clock on a mountaintop repeater, since the power gets interrupted on a fairly regular basis- usually due to the overhead lines touching due to wind galloping, or a tree branch falling across the lines. Once the power is interrupted, the time is in error and must be reset. Cost-effectiveness in my book is based on not just the amount of time, energy, and materials it takes to incorporate the modification, but also whether it eliminates a trip to the site. Since most controllers that I am familiar with run on DC power, the modification to add a 60 Hz synchronizing signal is not a trivial exercise. The TAPR device I mentioned is a step in the right direction, since it replaces the BIOS clock oscillator with a much more accurate timebase. The use of GPS time synchronization is already used in cellular telephone and simulcast systems, and these GPS-disciplined oscillators are readily available on the surplus market. I use an HP GPS-disciplined time base to lock all of the equipment on my RF bench to a 10 MHz standard frequency, and I hope to do the same at each of my repeater sites. The Motorola MTR2000 repeater has a built-in clock that can be locked to a precise external frequency standard, and can trigger an outboard voice box to announce the time- but that is a back-burner project right now. I've already breadboarded a time hack unit which marries a WWV receiver to a tone decoder. At the beginning of each hour, WWV broadcasts 800 ms of a 1500 Hz tone. I have a simple tone detector set to key the repeater when it hears the tone, and to feed that tone to the audio input. Simplicity at this point is a disadvantage, since the tone detection delay and the keyup delay of the transmitter means that part of the tone won't get transmitted. To remedy that, I added a digital countdown unit that is set for 59 minutes 57 seconds. This countdown timer is reset by the tone detector once each hour, and its output keys the transmitter's PTT input. With this improvement, the transmitter is already keyed and waiting for the tone, which is broadcast immediately when received. The tone decoder's relay output keeps the PTT active until the tone goes away, and then releases it. The repeater controller detects the loss of PTT and then triggers the station ID. There are many ways to embellish this device, but simplicity and reliability are my goals. The RC-210 controller slipped my mind; when the poster wrote or something like that I thought of the RI-210. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, November 23, 2006 8:34 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder]Repeater Controller snip It would be more cost-effective to put an 120 VAC input on the controller for the purpose of picking off the 60 Hz reference. Ever wonder why your 50 year-old AC-powered clock keeps perfect time (between power failures, anyway)? Bob NO6B
RE: [Repeater-Builder]REpeater Controller
Neal, the Arcom (http://www.ah6le.net/arcom/index.html) is a good controller. I have one on UHF, and another going on 900click the above link or all info. Chuck K0XM -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Neal Newman Sent: Thursday, November 23, 2006 8:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder]REpeater Controller Any of you guys know anything about a repeater controller called an RC-210? or something like that. I see this 3 port controller all the Time on Ebay Good, bad how difficult to program? thanks Neal Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.14.14/547 - Release Date: 11/22/2006 5:41 PM -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.14.14/547 - Release Date: 11/22/2006 5:41 PM -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.430 / Virus Database: 268.14.14/547 - Release Date: 11/22/2006 5:41 PM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * Your email settings: Individual Email | Traditional * To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) * To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder]REpeater Controller
LOL, I must have been fast asleep at the keyboard on that one Ken... Thanks for the correction! Ken Arck wrote: At 08:22 AM 11/23/2006, you wrote: Bottom line... They rock.. www.arcom.com ---Thanks Jay but that isn't our URL. http://www.ah6le.net/arcom Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links -- Jay Urish CCNANetwork Engineer http://jay.unixwolf.net 972.691.0125972.965.6229
Re: [Repeater-Builder]REpeater Controller
At 10:07 AM 11/23/2006, you wrote: LOL, I must have been fast asleep at the keyboard on that one Ken... No problem! We'll chalk it up to a case of pre-tryptophan! Happy T-day y'all. And to our non-American friends - Happy T-day too (THURS dayg) Ken -- President and CTO - Arcom Communications Makers of the world famous RC210 Repeater Controller and accessories. http://www.ah6le.net/arcom/index.html Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net
RE: [Repeater-Builder]Repeater Controller
At 11/23/2006 09:29, you wrote: Bob, I would never think of using the 60 Hz power line to synchronize the clock on a mountaintop repeater, since the power gets interrupted on a fairly regular basis- usually due to the overhead lines touching due to wind galloping, or a tree branch falling across the lines. Once the power is interrupted, the time is in error and must be reset. Not if the 60 Hz reference is backed up by the typical Dallas clock. Cost-effectiveness in my book is based on not just the amount of time, energy, and materials it takes to incorporate the modification, but also whether it eliminates a trip to the site. Since most controllers that I am familiar with run on DC power, the modification to add a 60 Hz synchronizing signal is not a trivial exercise. I'm not suggesting that one modify an existing controller, but rather that the controller manufacturers incorporate this feature into future designs. The hardware required to implement this feature would be quite inexpensive compared to the GPS option. None of my sites have internet connectivity, so the NTP server option is not for me, nor would I be able to hang a GPS antenna outside the building without paying for the extra antenna slot. I suspect many others are in the same boat. I've already breadboarded a time hack unit which marries a WWV receiver to a tone decoder. At the beginning of each hour, WWV broadcasts 800 ms of a 1500 Hz tone. I have a simple tone detector set to key the repeater when it I once tried to pick up the 10 MHz WWV signal from one of my sites. No way - far too much processor noise in the building. Bob NO6B
Re: [Repeater-Builder] Repeater Controller
If you are planning for just a single repeater and a link or two (IRLP or Echolink work like links from a controller perspective), there are lots of options. If you want to run both VHF and UHF repeaters (independently or linked together), plus links and maybe an autopatch, you might want to check out the RLC-4 at http://www.link-comm.com/controllers/rlc4.htm or the Club Deluxe II at http://www.link-comm.com/controllers/rlc-club.htm. Either one will handle multiple repeaters on the same controller, and can handle multiple audio paths simultaneously, allowing you to do things like use IRLP from VHF and Echolink from UHF at the same time. If you have any questions, please give us a call. Steve At 03:36 PM 6/1/2005 +, you wrote: What is the repeater controller of choice these days We have IRLP Echolink on the repeater also Right now it is VHF only however down the line we might want to add UHF I would be interested in your suggestions --- Steve Strobel Link Communications, Inc. 1035 Cerise Rd Billings, MT 59101-7378 (406) 245-5002 ext 102 (406) 245-4889 (fax) WWW: http://www.link-comm.com MailTo:[EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
At 03:36 PM 6/1/2005 -, you wrote: What is the repeater controller of choice these days We have IRLP Echolink on the repeater also Right now it is VHF only however down the line we might want to add UHF I would be interested in your suggestions ---May I suggest ours? http://www.ah6le.net/arcom/rc210/rc210.html -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html It was great to meet many of you at Dayton 2005! We offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Repeater Controller Query...
Steve, Could they direct that to the group, I would be interested in that info also. Paul -Original Message- From: aa5sg [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 29, 2005 10:43 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Repeater Controller Query... What repeater controllers in current production are, feature-wise, similar to the ACC RC-85? Also, has anyone compiled a list of ham repeater controller models and prices? I would be interested in seeing that. Please direct replies to my callsign at comcast dot net... Thanks! Steve aa5sg Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller Query...
Hi Steve, What repeater controllers in current production are, feature-wise, similar to the ACC RC-85? In no order of preference: Arcom, RC-210 Link Comm, RLC-Club, Club Deluxe, and Club Deluxe II FF Systems, FF-800 Information on these companies can be found from following the links available here: http://www.repeater-builder.com/rbtip/supplyindex.html#controllers or here: http://www.hamrepeater.org/control.cfm Also, has anyone compiled a list of ham repeater controller models and prices? Not to my knowledge. Hope this helps... Kevin Custer Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
The Club Deluxe II functions almost identically to the RLC-3 and costs a lot less. I will handle up to six radios plus an autopatch (included) for under $1200. You can find more information at http://www.link-comm.com/rlcclub.html. Disclaimer: I work for Link Communications. Steve At 07:16 AM 9/28/2004 -0400, you wrote: And a bigger price. Grin I do like the RLC3, but was hoping for an alternative. Ed Sean Fitzharris wrote: Ed, You'll want to look at Link-comm's RLC-3 controller which is upgradable to 8 radio ports. http://www.link-comm.com/rlc3.html -Sean On Mon, 27 Sep 2004, Mr. Edgar McKinney wrote: Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links Yahoo! Groups Links --- Steve Strobel Link Communications, Inc. 1035 Cerise Rd Billings, MT 59101-7378 (406) 245-5002 ext 102 (406) 245-4889 (fax) WWW: http://www.link-comm.com MailTo:[EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: Re: [Repeater-Builder] Repeater Controller
Just add $692.00 per month from your local provide telco for a 24 channel T-1 line with a 5 year contract and your in business! B:) $$$ Plus installation of the T-1... Some one here said your mileage will vary...:) --- [EMAIL PROTECTED] wrote: If you want to run all these repeaters at the same site, and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html. A system could be set up for under $1200 that could control up to 12 repeaters at the same site as well as link to other sites with an app_rpt/Asterisk system. Digium single port T1 Adapter card $500.00 Used 24 channel T1 FXS Channel Bank from E-bay $150.00 5 Telephone adapter boards $300 (kit form) retired 600MHz PC with 20GB hard disk $200.00 From: Mr. Edgar McKinney [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 04:27:41 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater Controller Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links [EMAIL PROTECTED] - Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, anda 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, Idon't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote:Dothey have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Gouml;ran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links - Do you Yahoo!? Yahoo! Mail
Re: Re: [Repeater-Builder] Repeater Controller
Mike, I suppose you could do that, but our adapter board was designed so that the more commonly available FXS channel banks could be used. The two systems I have running use CAC Access bank I FSX channel banks which are $150 each on E-bay. In any case our adapter board has the transformers you mentioned. A better solution will be available in the future, we are designing a 4 port PCI card with a radio interface (RX/TX audio, COR,PL, and PTT) which will eliminate the need for a $500 T1 card and channel bank. Steve WA6ZFT From: Mike WA6ILQ [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 06:42:26 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: Re: [Repeater-Builder] Repeater Controller If that channel band could be filled with EM cards it would be a lot simpler. A single EM port talks to a radio just fine. M=PTT, E=COR, and transformer couple the audio. Mike At 02:34 PM 9/27/04, you wrote: If you want to run all these repeaters at the same site, and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html. A system could be set up for under $1200 that could control up to 12 repeaters at the same site as well as link to other sites with an app_rpt/Asterisk system. Digium single port T1 Adapter card $500.00 Used 24 channel T1 FXS Channel Bank from E-bay $150.00 5 Telephone adapter boards $300 (kit form) retired 600MHz PC with 20GB hard disk $200.00 From: Mr. Edgar McKinney [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 04:27:41 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater Controller Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407
Re: Re: [Repeater-Builder] Repeater Controller
Please visit the link. No T1 service is necessary. Steve WA6ZFT From: [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 07:19:23 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: Re: [Repeater-Builder] Repeater Controller Just add $692.00 per month from your local provide telco for a 24 channel T-1 line with a 5 year contract and your in business! B:) $$$ Plus installation of the T-1... Some one here said your mileage will vary...:) --- [EMAIL PROTECTED] wrote: If you want to run all these repeaters at the same site, and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html. A system could be set up for under $1200 that could control up to 12 repeaters at the same site as well as link to other sites with an app_rpt/Asterisk system. Digium single port T1 Adapter card $500.00 Used 24 channel T1 FXS Channel Bank from E-bay $150.00 5 Telephone adapter boards $300 (kit form) retired 600MHz PC with 20GB hard disk $200.00 From: Mr. Edgar McKinney [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 04:27:41 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater Controller Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links [EMAIL PROTECTED] - Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, anda 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, Idon't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote:Dothey have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me
Re: Re: [Repeater-Builder] Repeater Controller
No need for a Telco T1, he's talking about coupling the Digium card to the Channel bank (same idea as two PCs with an ethernet crossover cable). Mike At 04:19 PM 9/27/04, [EMAIL PROTECTED] wrote: Just add $692.00 per month from your local provide telco for a 24 channel T-1 line with a 5 year contract and your in business! B:) $$$ Plus installation of the T-1... Some one here said your mileage will vary...:) --- [EMAIL PROTECTED] wrote: If you want to run all these repeaters at the same site, and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html. A system could be set up for under $1200 that could control up to 12 repeaters at the same site as well as link to other sites with an app_rpt/Asterisk system. Digium single port T1 Adapter card $500.00 Used 24 channel T1 FXS Channel Bank from E-bay $150.00 5 Telephone adapter boards $300 (kit form) retired 600MHz PC with 20GB hard disk $200.00 From: Mr. Edgar McKinney [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 04:27:41 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater Controller Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way - Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, anda 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, Idon't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote:Dothey have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Gouml;ran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
And a bigger price. Grin I do like the RLC3, but was hoping for an alternative. Ed Sean Fitzharris wrote: Ed, You'll want to look at Link-comm's RLC-3 controller which is upgradable to 8 radio ports. http://www.link-comm.com/rlc3.html -Sean On Mon, 27 Sep 2004, Mr. Edgar McKinney wrote: Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
Can the three port controller be ganed with another to make a sis port? Also I goofed Not 42 Mcs!!! Its 52Mcs!!! Sorry Big grin Ed Ken Arck wrote: At 04:27 PM 9/27/2004 -0400, you wrote: Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. ---We offer a 3 port controller: http://www.ah6le.net/arcom/11.html g Ken -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We now offer complete Kenwood TKR repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 [EMAIL PROTECTED] wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 [EMAIL PROTECTED] wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Repeater Controller
Ed, The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that. Paul"Mr. Edgar McKinney" [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4?EdPaul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 <[EMAIL PROTECTED]>wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links[EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups LinksYahoo! Groups Links* To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED]* Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Repeater Controller
Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul "Mr. Edgar McKinney" [EMAIL PROTECTED]> wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: > Have you checked out the inexpensive controller kits > from NHRC? They may have more features than you need, > but they are easy to build and small. > > http://www.nhrc.net/ > > Paul, KB9WLC > > --- goreks2000<[EMAIL PROTECTED]>wrote: > > > Hello > > I want to build a simple repeater controller to have > > as a portable > > repeater along wit my Motorola HT800 (407-435mhz)to > > use on small > > motor sports event but I don't find (I think I use > > one HT800 as RX > > and a mobile rig as TX ex yaesu FT7800) > > Any thing simple, most controllers have DTMF or CTSS > > in it > > The only thing I need is PTT opening (maybe 1750 > > hz ) > > And a Audio isolation/amplifier if necessary > > Can any one help me with building instructions > > Manny thanks and 73 > > Gran SM1YCE > > Sweden > > > > Sorry for my bad spelling I hope you understand any > > way > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > ___ > Do you Yahoo!? > Declare Yourself - Register online to vote today! > http://vote.yahoo.com > > > Yahoo! Groups Links > > > > Yahoo! Groups Links *> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ *> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] *> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Repeater Controller
Ed, You'll want to look at Link-comm's RLC-3 controller which is upgradable to 8 radio ports. http://www.link-comm.com/rlc3.html -Sean On Mon, 27 Sep 2004, Mr. Edgar McKinney wrote: Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: Re: [Repeater-Builder] Repeater Controller
If you want to run all these repeaters at the same site, and have VOIP linking capability, you might want to check out www.zapatatelephony.org/app_rpt.html. A system could be set up for under $1200 that could control up to 12 repeaters at the same site as well as link to other sites with an app_rpt/Asterisk system. Digium single port T1 Adapter card $500.00 Used 24 channel T1 FXS Channel Bank from E-bay $150.00 5 Telephone adapter boards $300 (kit form) retired 600MHz PC with 20GB hard disk $200.00 From: Mr. Edgar McKinney [EMAIL PROTECTED] Date: 2004/09/27 Mon PM 04:27:41 EDT To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Repeater Controller Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul Mr. Edgar McKinney [EMAIL PROTECTED] wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: Have you checked out the inexpensive controller kits from NHRC? They may have more features than you need, but they are easy to build and small. http://www.nhrc.net/ Paul, KB9WLC --- goreks2000 wrote: Hello I want to build a simple repeater controller to have as a portable repeater along wit my Motorola HT800 (407-435mhz)to use on small motor sports event but I don't find (I think I use one HT800 as RX and a mobile rig as TX ex yaesu FT7800) Any thing simple, most controllers have DTMF or CTSS in it The only thing I need is PTT opening (maybe 1750 hz ) And a Audio isolation/amplifier if necessary Can any one help me with building instructions Manny thanks and 73 Göran SM1YCE Sweden Sorry for my bad spelling I hope you understand any way Yahoo! Groups Links [EMAIL PROTECTED] ___ Do you Yahoo!? Declare Yourself - Register online to vote today! http://vote.yahoo.com Yahoo! Groups Links Yahoo! Groups Links --- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! --- Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Ok... I'd like one to run a 42 Mcsr, 146 mcs, 225 Mcs, 444 Mcs, and a 900 pluss a remote base. Ed Paul Guello wrote: Ed,The Link RLC-4 is a 4 port controller, I don't think NHRC has anything like that.Paul "Mr. Edgar McKinney" [EMAIL PROTECTED]> wrote: Do they have a controller like the LINK's RLC-4? Ed Paul Guello wrote: > Have you checked out the inexpensive controller kits > from NHRC? They may have more features than you need, > but they are easy to build and small. > > http://www.nhrc.net/ > > Paul, KB9WLC > > --- goreks2000<[EMAIL PROTECTED]>wrote: > > > Hello > > I want to build a simple repeater controller to have > > as a portable > > repeater along wit my Motorola HT800 (407-435mhz)to > > use on small > > motor sports event but I don't find (I think I use > > one HT800 as RX > > and a mobile rig as TX ex yaesu FT7800) > > Any thing simple, most controllers have DTMF or CTSS > > in it > > The only thing I need is PTT opening (maybe 1750 > > hz ) > > And a Audio isolation/amplifier if necessary > > Can any one help me with building instructions > > Manny thanks and 73 > > Gran SM1YCE > > Sweden > > > > Sorry for my bad spelling I hope you understand any > > way > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > [EMAIL PROTECTED] > > > > > > > > > > > ___ > Do you Yahoo!? > Declare Yourself - Register online to vo
