Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
http://review.coreboot.org/#/c/11376/Only this can be apply to Trinity. Zheng > Date: Wed, 2 Sep 2015 17:22:30 +0200 > From: vid...@gmail.com > To: seabios@seabios.org > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached > when power up (Summary: not final fixed yet) > > 2015-08-26 14:33 GMT+02:00 Zheng Bao: > > Yes. Need test by our validation dept. > > Hello Zheng, > > Is there an estimated turnaround time for changes to be delivered? > > Would the following changesets apply to Trinity? > http://review.coreboot.org/#/c/11375/ > http://review.coreboot.org/#/c/11376/ > http://review.coreboot.org/#/c/11377/ > > Idwer > > > > > > >> Date: Wed, 26 Aug 2015 13:55:52 +0200 > >> From: vid...@gmail.com > >> To: seabios@seabios.org > >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is > >> attached when power up (Summary: not final fixed yet) > > > >> > >> 2015-08-26 10:02 GMT+02:00 Zheng Bao : > >> > Changing the AMD register in Coreboot code can only solve the USB3 > >> > problem > >> > in OS. In SeaBIOS stage, the problem still exists. > >> > >> Will you submit a change to AGESA? > >> > >> > > >> > I will start a new thread to describe the problem. > >> > > >> > Zheng > >> > > >> > > >> > From: fishb...@hotmail.com > >> > To: vid...@gmail.com; seabios@seabios.org > >> > Date: Wed, 26 Aug 2015 05:35:12 + > >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is > >> > attached > >> > when power up > >> > > >> > Problem solved. It is about a internal register setting. > >> > Zheng > >> > > >> > > >> > > >> > From: fishb...@hotmail.com > >> > To: vid...@gmail.com; seabios@seabios.org > >> > Date: Tue, 25 Aug 2015 12:06:34 + > >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is > >> > attached > >> > when power up > >> > > >> > Message after power up. xhci is ok. > >> > > >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) > >> > Found coreboot cbmem console @ bffde000 > >> > Found mainboard AMD Parmer > >> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688) > >> > Found CBFS header at 0xfc60 > >> > CPU Mhz=2497 > >> > Found 23 PCI devices (max PCI bus is 02) > >> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10 > >> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0 > >> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0 > >> > Copying PIR from 0xbffdd000 to 0x000f1780 > >> > Using pmtimer, ioport 0x818 > >> > Scan for VGA option rom > >> > Running option rom at c000:0003 > >> > Turning on vga text mode console > >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) > >> > /bff52000\ Start thread > >> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32 > >> > slots, > >> > 32 byte contexts > >> > |bff52000| XHCI extcap 0x1 @ f0248500 > >> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0 > >> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0 > >> > /bff51000\ Start thread > >> > |bff51000| configure_xhci: resetting > >> > Found 1 serial ports > >> > AHCI controller at 11.0, iobase f024d000, irq 0 > >> > AHCI: cap 0xf3309f05, ports_impl 0x3f > >> > /bff5\ Start thread > >> > |bff5| AHCI/0: probing > >> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820) > >> > /bff4f000\ Start thread > >> > /bff4d000\ Start thread > >> > |bff4d000| AHCI/1: probing > >> > |bff5| AHCI/0: link down > >> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920) > >> > /bff4c000\ Start thread > >> > /bff4b000\ Start thread > >> > |bff4b000| AHCI/2: probing > >> > |bff4d000| AHCI/1: link down > >> > \bff5/ End thread > >> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000) > >> > /bff5\ Start thread > >> > /bff4a000\ Start thread > >> > /bff49000\ Start thread > >> > |bff49000| AHCI/3: probing > >> > |bff4b000| AHCI/2: link down > >> > \bff4d000/ End thread > >> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000) > >> > /bff4d000\ Start thread > >> > /bff48000\ Start thread > >> > /bff47000\ Start thread > >> > /bff45000\ Start thread > >> > |bff45000| AHCI/4: probing > >> > |bff49000| AHCI/3: link down > >> > \bff4b000/ End thread > >> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000) > >> > /bff4b000\ Start thread > >> > /bff44000\ Start thread > >> > /bff43000\ Start thread > >> > /bff42000\ Start thread > >> > |bff42000| AHCI/5: probing > >> > |bff45000| AHCI/4: link down > >> > \bff49000/ End thread > >> > \bff52000/ End thread > >> > /bff52000\ Start thread > >> > \bff52000/ End thread > >> > /bff52000\ Start thread > >> > |bff42000| AHCI/5: link down > >> > \bff45000/ End thread > >> > /bff49000\ Start thread > >> > /bff46000\ Start thread > >> > /bff45000\ Start thread > >> > \bff42000/ End thread > >> > /bff42000\ Start thread > >> >
Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
2015-08-26 14:33 GMT+02:00 Zheng Bao: > Yes. Need test by our validation dept. Hello Zheng, Is there an estimated turnaround time for changes to be delivered? Would the following changesets apply to Trinity? http://review.coreboot.org/#/c/11375/ http://review.coreboot.org/#/c/11376/ http://review.coreboot.org/#/c/11377/ Idwer > > >> Date: Wed, 26 Aug 2015 13:55:52 +0200 >> From: vid...@gmail.com >> To: seabios@seabios.org >> Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is >> attached when power up (Summary: not final fixed yet) > >> >> 2015-08-26 10:02 GMT+02:00 Zheng Bao : >> > Changing the AMD register in Coreboot code can only solve the USB3 >> > problem >> > in OS. In SeaBIOS stage, the problem still exists. >> >> Will you submit a change to AGESA? >> >> > >> > I will start a new thread to describe the problem. >> > >> > Zheng >> > >> > >> > From: fishb...@hotmail.com >> > To: vid...@gmail.com; seabios@seabios.org >> > Date: Wed, 26 Aug 2015 05:35:12 + >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is >> > attached >> > when power up >> > >> > Problem solved. It is about a internal register setting. >> > Zheng >> > >> > >> > >> > From: fishb...@hotmail.com >> > To: vid...@gmail.com; seabios@seabios.org >> > Date: Tue, 25 Aug 2015 12:06:34 + >> > Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is >> > attached >> > when power up >> > >> > Message after power up. xhci is ok. >> > >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) >> > Found coreboot cbmem console @ bffde000 >> > Found mainboard AMD Parmer >> > Relocating init from 0x000e7b40 to 0xbff55050 (size 40688) >> > Found CBFS header at 0xfc60 >> > CPU Mhz=2497 >> > Found 23 PCI devices (max PCI bus is 02) >> > Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10 >> > Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0 >> > Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0 >> > Copying PIR from 0xbffdd000 to 0x000f1780 >> > Using pmtimer, ioport 0x818 >> > Scan for VGA option rom >> > Running option rom at c000:0003 >> > Turning on vga text mode console >> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) >> > /bff52000\ Start thread >> > |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32 >> > slots, >> > 32 byte contexts >> > |bff52000| XHCI extcap 0x1 @ f0248500 >> > |bff52000| XHCI protocol USB 3.00, 2 ports (offset 1), def 0 >> > |bff52000| XHCI protocol USB 2.00, 2 ports (offset 3), def 0 >> > /bff51000\ Start thread >> > |bff51000| configure_xhci: resetting >> > Found 1 serial ports >> > AHCI controller at 11.0, iobase f024d000, irq 0 >> > AHCI: cap 0xf3309f05, ports_impl 0x3f >> > /bff5\ Start thread >> > |bff5| AHCI/0: probing >> > |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820) >> > /bff4f000\ Start thread >> > /bff4d000\ Start thread >> > |bff4d000| AHCI/1: probing >> > |bff5| AHCI/0: link down >> > |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920) >> > /bff4c000\ Start thread >> > /bff4b000\ Start thread >> > |bff4b000| AHCI/2: probing >> > |bff4d000| AHCI/1: link down >> > \bff5/ End thread >> > |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000) >> > /bff5\ Start thread >> > /bff4a000\ Start thread >> > /bff49000\ Start thread >> > |bff49000| AHCI/3: probing >> > |bff4b000| AHCI/2: link down >> > \bff4d000/ End thread >> > |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000) >> > /bff4d000\ Start thread >> > /bff48000\ Start thread >> > /bff47000\ Start thread >> > /bff45000\ Start thread >> > |bff45000| AHCI/4: probing >> > |bff49000| AHCI/3: link down >> > \bff4b000/ End thread >> > |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000) >> > /bff4b000\ Start thread >> > /bff44000\ Start thread >> > /bff43000\ Start thread >> > /bff42000\ Start thread >> > |bff42000| AHCI/5: probing >> > |bff45000| AHCI/4: link down >> > \bff49000/ End thread >> > \bff52000/ End thread >> > /bff52000\ Start thread >> > \bff52000/ End thread >> > /bff52000\ Start thread >> > |bff42000| AHCI/5: link down >> > \bff45000/ End thread >> > /bff49000\ Start thread >> > /bff46000\ Start thread >> > /bff45000\ Start thread >> > \bff42000/ End thread >> > /bff42000\ Start thread >> > /bff41000\ Start thread >> > /bff4\ Start thread >> > /bff3f000\ Start thread >> > /bff3e000\ Start thread >> > /bff3d000\ Start thread >> > /bff3c000\ Start thread >> > /bff3b000\ Start thread >> > |bff3b000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4 >> > [Super] >> > /bff3a000\ Start thread >> > /bff39000\ Start thread >> > /bff38000\ Start thread >> > /bff37000\ Start thread >> > /bff36000\ Start thread >> > /bff35000\ Start thread >> > |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid >> > 0, >> > epid 1 >> > |bff3b000|
Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
Zheng Bao wrote: Yes. Need test by our validation dept. Thank you for working on this! //Peter ___ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios
Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
2015-08-26 10:02 GMT+02:00 Zheng Bao fishb...@hotmail.com: Changing the AMD register in Coreboot code can only solve the USB3 problem in OS. In SeaBIOS stage, the problem still exists. Will you submit a change to AGESA? I will start a new thread to describe the problem. Zheng From: fishb...@hotmail.com To: vid...@gmail.com; seabios@seabios.org Date: Wed, 26 Aug 2015 05:35:12 + Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up Problem solved. It is about a internal register setting. Zheng From: fishb...@hotmail.com To: vid...@gmail.com; seabios@seabios.org Date: Tue, 25 Aug 2015 12:06:34 + Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up Message after power up. xhci is ok. SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) Found coreboot cbmem console @ bffde000 Found mainboard AMD Parmer Relocating init from 0x000e7b40 to 0xbff55050 (size 40688) Found CBFS header at 0xfc60 CPU Mhz=2497 Found 23 PCI devices (max PCI bus is 02) Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10 Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0 Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0 Copying PIR from 0xbffdd000 to 0x000f1780 Using pmtimer, ioport 0x818 Scan for VGA option rom Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) /bff52000\ Start thread |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32 slots, 32 byte contexts |bff52000| XHCIextcap 0x1 @ f0248500 |bff52000| XHCIprotocol USB 3.00, 2 ports (offset 1), def 0 |bff52000| XHCIprotocol USB 2.00, 2 ports (offset 3), def 0 /bff51000\ Start thread |bff51000| configure_xhci: resetting Found 1 serial ports AHCI controller at 11.0, iobase f024d000, irq 0 AHCI: cap 0xf3309f05, ports_impl 0x3f /bff5\ Start thread |bff5| AHCI/0: probing |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820) /bff4f000\ Start thread /bff4d000\ Start thread |bff4d000| AHCI/1: probing |bff5| AHCI/0: link down |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920) /bff4c000\ Start thread /bff4b000\ Start thread |bff4b000| AHCI/2: probing |bff4d000| AHCI/1: link down \bff5/ End thread |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000) /bff5\ Start thread /bff4a000\ Start thread /bff49000\ Start thread |bff49000| AHCI/3: probing |bff4b000| AHCI/2: link down \bff4d000/ End thread |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000) /bff4d000\ Start thread /bff48000\ Start thread /bff47000\ Start thread /bff45000\ Start thread |bff45000| AHCI/4: probing |bff49000| AHCI/3: link down \bff4b000/ End thread |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000) /bff4b000\ Start thread /bff44000\ Start thread /bff43000\ Start thread /bff42000\ Start thread |bff42000| AHCI/5: probing |bff45000| AHCI/4: link down \bff49000/ End thread \bff52000/ End thread /bff52000\ Start thread \bff52000/ End thread /bff52000\ Start thread |bff42000| AHCI/5: link down \bff45000/ End thread /bff49000\ Start thread /bff46000\ Start thread /bff45000\ Start thread \bff42000/ End thread /bff42000\ Start thread /bff41000\ Start thread /bff4\ Start thread /bff3f000\ Start thread /bff3e000\ Start thread /bff3d000\ Start thread /bff3c000\ Start thread /bff3b000\ Start thread |bff3b000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4 [Super] /bff3a000\ Start thread /bff39000\ Start thread /bff38000\ Start thread /bff37000\ Start thread /bff36000\ Start thread /bff35000\ Start thread |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid 0, epid 1 |bff3b000| xhci_cmd_enable_slot: |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0] |bff3b000| xhci_process_events: status change port #2 |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt 0xbff9ee00, type 33, eidx 1, cc 1] |bff3b000| xhci_alloc_pipe: enable slot: got slotid 1 |bff3b000| xhci_cmd_address_device: slotid 1 |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0] /bff34000\ Start thread /bff33000\ Start thread |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed10, evt 0xbff9ee00, type 33, eidx 2, cc 1] |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid 1, epid 1 |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 1, len 8] |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 2, len 8] |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 3, len 0] |bff3b000| xhci_xfer_kick: ring 0xbff9e400, slotid 1, epid 1 |bff3b000| xhci_process_events: ring 0xbff9e400 [trb 0xbff9e420, evt 0xbff9e500, type 32, eidx 3, cc 1] |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid 1, epid 1 |bff3b000|
Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet)
Yes. Need test by our validation dept. Date: Wed, 26 Aug 2015 13:55:52 +0200 From: vid...@gmail.com To: seabios@seabios.org Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up (Summary: not final fixed yet) 2015-08-26 10:02 GMT+02:00 Zheng Bao fishb...@hotmail.com: Changing the AMD register in Coreboot code can only solve the USB3 problem in OS. In SeaBIOS stage, the problem still exists. Will you submit a change to AGESA? I will start a new thread to describe the problem. Zheng From: fishb...@hotmail.com To: vid...@gmail.com; seabios@seabios.org Date: Wed, 26 Aug 2015 05:35:12 + Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up Problem solved. It is about a internal register setting. Zheng From: fishb...@hotmail.com To: vid...@gmail.com; seabios@seabios.org Date: Tue, 25 Aug 2015 12:06:34 + Subject: Re: [SeaBIOS] : USB 3.0 port failed if a USB 3.0 device is attached when power up Message after power up. xhci is ok. SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) Found coreboot cbmem console @ bffde000 Found mainboard AMD Parmer Relocating init from 0x000e7b40 to 0xbff55050 (size 40688) Found CBFS header at 0xfc60 CPU Mhz=2497 Found 23 PCI devices (max PCI bus is 02) Copying SMBIOS entry point from 0xbffa7000 to 0x000f1a10 Copying ACPI RSDP from 0xbffb8000 to 0x000f19e0 Copying MPTABLE from 0xbffdc000/bffdc010 to 0x000f17b0 Copying PIR from 0xbffdd000 to 0x000f1780 Using pmtimer, ioport 0x818 Scan for VGA option rom Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150825_074224-supersrv) /bff52000\ Start thread |bff52000| XHCI init on dev 00:10.0: regs @ 0xf0248000, 4 ports, 32 slots, 32 byte contexts |bff52000| XHCIextcap 0x1 @ f0248500 |bff52000| XHCIprotocol USB 3.00, 2 ports (offset 1), def 0 |bff52000| XHCIprotocol USB 2.00, 2 ports (offset 3), def 0 /bff51000\ Start thread |bff51000| configure_xhci: resetting Found 1 serial ports AHCI controller at 11.0, iobase f024d000, irq 0 AHCI: cap 0xf3309f05, ports_impl 0x3f /bff5\ Start thread |bff5| AHCI/0: probing |bff52000| EHCI init on dev 00:12.2 (regs=0xf024d820) /bff4f000\ Start thread /bff4d000\ Start thread |bff4d000| AHCI/1: probing |bff5| AHCI/0: link down |bff52000| EHCI init on dev 00:13.2 (regs=0xf024d920) /bff4c000\ Start thread /bff4b000\ Start thread |bff4b000| AHCI/2: probing |bff4d000| AHCI/1: link down \bff5/ End thread |bff52000| OHCI init on dev 00:12.0 (regs=0xf024a000) /bff5\ Start thread /bff4a000\ Start thread /bff49000\ Start thread |bff49000| AHCI/3: probing |bff4b000| AHCI/2: link down \bff4d000/ End thread |bff52000| OHCI init on dev 00:13.0 (regs=0xf024b000) /bff4d000\ Start thread /bff48000\ Start thread /bff47000\ Start thread /bff45000\ Start thread |bff45000| AHCI/4: probing |bff49000| AHCI/3: link down \bff4b000/ End thread |bff52000| OHCI init on dev 00:14.5 (regs=0xf024c000) /bff4b000\ Start thread /bff44000\ Start thread /bff43000\ Start thread /bff42000\ Start thread |bff42000| AHCI/5: probing |bff45000| AHCI/4: link down \bff49000/ End thread \bff52000/ End thread /bff52000\ Start thread \bff52000/ End thread /bff52000\ Start thread |bff42000| AHCI/5: link down \bff45000/ End thread /bff49000\ Start thread /bff46000\ Start thread /bff45000\ Start thread \bff42000/ End thread /bff42000\ Start thread /bff41000\ Start thread /bff4\ Start thread /bff3f000\ Start thread /bff3e000\ Start thread /bff3d000\ Start thread /bff3c000\ Start thread /bff3b000\ Start thread |bff3b000| XHCI port #2: 0x00021203, powered, enabled, pls 0, speed 4 [Super] /bff3a000\ Start thread /bff39000\ Start thread /bff38000\ Start thread /bff37000\ Start thread /bff36000\ Start thread /bff35000\ Start thread |bff3b000| xhci_alloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid 0, epid 1 |bff3b000| xhci_cmd_enable_slot: |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 1, len 0] |bff3b000| xhci_process_events: status change port #2 |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed00, evt 0xbff9ee00, type 33, eidx 1, cc 1] |bff3b000| xhci_alloc_pipe: enable slot: got slotid 1 |bff3b000| xhci_cmd_address_device: slotid 1 |bff3b000| xhci_trb_queue: ring 0xbff9ed00 [nidx 2, len 0] /bff34000\ Start thread /bff33000\ Start thread |bff3b000| xhci_process_events: ring 0xbff9ed00 [trb 0xbff9ed10, evt 0xbff9ee00, type 33, eidx 2, cc 1] |bff3b000| xhci_realloc_pipe: usbdev 0xbff53350, ring 0xbff9e400, slotid 1, epid 1 |bff3b000| xhci_trb_queue: ring 0xbff9e400 [nidx 1,