Re: [Sipp-users] successfull calls for server performance
Well, so you just count the sent INVITEs (without retransmissions) and the received ACKs. You can get this information quite easily by using the -trace_shortmsg-function. n(ACK)/n(INVITE w/o retrans) is the successrate ;) br Michael On 2011-03-31 18:10, viswavardhanreddy karna wrote: Hi all, i want to measure depending on the success-rate relevant. i will measure server performance by sending number of calls/second to server to load the server and by that i will be measuring the no:of successful calls On Thu, Mar 31, 2011 at 4:00 PM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: (Please do not forget to reply to the list too.) Well, what exactly do you want to measure? How do you define performance? * Is the delay relevant (performance indicated by the speed of processing the requests at high load)? * Or is the success-rate relevant (performance indicated by how man calls were set up successfully)? * or is both relevant (a call must handled successfully within a specific time interval)? Depending on your definition, you must decide, where and what you want to observe. br Michael On 2011-03-31 15:26, viswavardhanreddy karna wrote: Hi michael, Thanks again for replying But when you see the only acks ... how many invites you send from client that many acks can be received... so there will be no failure calls every call will be successsful. For calculating the server performance i am loading server with calls/sec of more than 500 or 600 in that case if every call becomes successful how can we know the server performances at acks with regards, viswavardhan On Thu, Mar 31, 2011 at 3:13 PM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: On 2011-03-31 14:41, viswavardhanreddy karna wrote: I am using SIPp as traffic generator... in order to calculate the number of successful calls from total number of calls which side results should be taken? Well, the question is, how do you define a successful call? And that's the reason why I forwarded you to rfc6076, where some of these metrics are described. E.g., you can calculate the Successful Session Setup - Session Request Delay - the delta between sending the 1st INVITE and receiving the first response initiated by the B-Party (mostly the 180 Ringing). Another metric is the Session Disconnect Delay, where you calculate the delay between sending the BYE and receiving the 200OK Usually, a successful call is initiated, when the ACK arrived at B-Party. So, log with the shortmessages-flag on both A- and B-party and calculate the sent INVITEs-received ACKs ratio br Michael what i mean is user agent client produces some results and user agent server produces some results .. in these 2 results which results should i consider as number of successfull calls? can you please give me an idea regarding this... with regards, viswavardhan On Thu, Mar 31, 2011 at 9:55 AM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: I propose you take the KPIs from RFC 6076 - Basic Telephony SIP End-to-End Performance Metrics, br Michael On 2011-03-30 23:23, viswavardhanreddy karna wrote: Hi every one, I have a doubt regarding the calculation of server perforrmance. Should we take successfull calls that are obtained from the UAC side ? or successful calls obtained from the UAS SIDE..? for evaluation of server performance... thanking you soo much, with regards,
Re: [Sipp-users] successfull calls for server performance
I propose you take the KPIs from RFC 6076 - Basic Telephony SIP End-to-End Performance Metrics, br Michael On 2011-03-30 23:23, viswavardhanreddy karna wrote: Hi every one, I have a doubt regarding the calculation of server perforrmance. Should we take successfull calls that are obtained from the UAC side ? or successful calls obtained from the UAS SIDE..? for evaluation of server performance... thanking you soo much, with regards, viswavardhan -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
Re: [Sipp-users] successfull calls for server performance
On 2011-03-31 14:41, viswavardhanreddy karna wrote: I am using SIPp as traffic generator... in order to calculate the number of successful calls from total number of calls which side results should be taken? Well, the question is, how do you define a successful call? And that's the reason why I forwarded you to rfc6076, where some of these metrics are described. E.g., you can calculate the Successful Session Setup - Session Request Delay - the delta between sending the 1st INVITE and receiving the first response initiated by the B-Party (mostly the 180 Ringing). Another metric is the Session Disconnect Delay, where you calculate the delay between sending the BYE and receiving the 200OK Usually, a successful call is initiated, when the ACK arrived at B-Party. So, log with the shortmessages-flag on both A- and B-party and calculate the sent INVITEs-received ACKs ratio br Michael what i mean is user agent client produces some results and user agent server produces some results .. in these 2 results which results should i consider as number of successfull calls? can you please give me an idea regarding this... with regards, viswavardhan On Thu, Mar 31, 2011 at 9:55 AM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: I propose you take the KPIs from RFC 6076 - Basic Telephony SIP End-to-End Performance Metrics, br Michael On 2011-03-30 23:23, viswavardhanreddy karna wrote: Hi every one, I have a doubt regarding the calculation of server perforrmance. Should we take successfull calls that are obtained from the UAC side ? or successful calls obtained from the UAS SIDE..? for evaluation of server performance... thanking you soo much, with regards, viswavardhan -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net mailto:Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net mailto:Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
Re: [Sipp-users] successfull calls for server performance
Hi all, i want to measure depending on the success-rate relevant. i will measure server performance by sending number of calls/second to server to load the server and by that i will be measuring the no:of successful calls On Thu, Mar 31, 2011 at 4:00 PM, Michael Hirschbichler s...@hirschbichler.biz wrote: (Please do not forget to reply to the list too.) Well, what exactly do you want to measure? How do you define performance? * Is the delay relevant (performance indicated by the speed of processing the requests at high load)? * Or is the success-rate relevant (performance indicated by how man calls were set up successfully)? * or is both relevant (a call must handled successfully within a specific time interval)? Depending on your definition, you must decide, where and what you want to observe. br Michael On 2011-03-31 15:26, viswavardhanreddy karna wrote: Hi michael, Thanks again for replying But when you see the only acks ... how many invites you send from client that many acks can be received... so there will be no failure calls every call will be successsful. For calculating the server performance i am loading server with calls/sec of more than 500 or 600 in that case if every call becomes successful how can we know the server performances at acks with regards, viswavardhan On Thu, Mar 31, 2011 at 3:13 PM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: On 2011-03-31 14:41, viswavardhanreddy karna wrote: I am using SIPp as traffic generator... in order to calculate the number of successful calls from total number of calls which side results should be taken? Well, the question is, how do you define a successful call? And that's the reason why I forwarded you to rfc6076, where some of these metrics are described. E.g., you can calculate the Successful Session Setup - Session Request Delay - the delta between sending the 1st INVITE and receiving the first response initiated by the B-Party (mostly the 180 Ringing). Another metric is the Session Disconnect Delay, where you calculate the delay between sending the BYE and receiving the 200OK Usually, a successful call is initiated, when the ACK arrived at B-Party. So, log with the shortmessages-flag on both A- and B-party and calculate the sent INVITEs-received ACKs ratio br Michael what i mean is user agent client produces some results and user agent server produces some results .. in these 2 results which results should i consider as number of successfull calls? can you please give me an idea regarding this... with regards, viswavardhan On Thu, Mar 31, 2011 at 9:55 AM, Michael Hirschbichler s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz mailto:s...@hirschbichler.biz wrote: I propose you take the KPIs from RFC 6076 - Basic Telephony SIP End-to-End Performance Metrics, br Michael On 2011-03-30 23:23, viswavardhanreddy karna wrote: Hi every one, I have a doubt regarding the calculation of server perforrmance. Should we take successfull calls that are obtained from the UAC side ? or successful calls obtained from the UAS SIDE..? for evaluation of server performance... thanking you soo much, with regards, viswavardhan -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net mailto:Sipp-users@lists.sourceforge.net mailto:Sipp-users@lists.sourceforge.net mailto:Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code
[Sipp-users] successfull calls for server performance
Hi every one, I have a doubt regarding the calculation of server perforrmance. Should we take successfull calls that are obtained from the UAC side ? or successful calls obtained from the UAS SIDE..? for evaluation of server performance... thanking you soo much, with regards, viswavardhan -- Create and publish websites with WebMatrix Use the most popular FREE web apps or write code yourself; WebMatrix provides all the features you need to develop and publish your website. http://p.sf.net/sfu/ms-webmatrix-sf ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users