[pfSense Support] Access ADSL modem on WAN port
Hi, I have an DSL modem with a web interface from which i can get the status etc. It only reacts to an IP adres in the same subnet (10.0.0.0/24). Pfsense gets an IP using DHCP, but it is in a different range then the DSL modem (while being on the same interface). Is it possible to have 2 IP's on the WAN side? Dhcp Static 10.0.0.0/24? I've tried using virtual ip addresses but that doesn't seem to work, unless i'm doing something wrong. The ideal situation would be to have 2 ip addresses and tell outbound NAT to use IP adress X for 10.0.0.0/24 and IP address Y for the rest of the internet. Is this possible with pfsense? -- Jeroen - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Access ADSL modem on WAN port
You might be able to create a proxy arp address on that interface (virtual IPs screen) and then create an outbound nat that matches your dsl modems IP address and source it from the proxy arp address. --BillOn 9/17/05, Jeroen Geusebroek [EMAIL PROTECTED] wrote: Hi,I have an DSL modem with a web interface from which i can get the status etc.It only reacts to an IP adres in the same subnet (10.0.0.0/24).Pfsense gets an IP using DHCP, but it is in a different range then the DSL modem (while being on the same interface).Is it possible to have 2 IP's on the WAN side? Dhcp Static 10.0.0.0/24?I've tried using virtual ip addresses but that doesn't seem to work, unless i'm doing something wrong.The ideal situation would be to have 2 ip addresses and tell outbound NATto use IP adress X for 10.0.0.0/24 and IP address Y for the rest ofthe internet. Is this possible with pfsense?--Jeroen-To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Access ADSL modem on WAN port
On 9/17/05, Bill Marquette [EMAIL PROTECTED] wrote: You might be able to create a proxy arp address on that interface (virtual IPs screen) and then create an outbound nat that matches your dsl modems IP address and source it from the proxy arp address. Thanks for the reply; that's exactly what i tried, but it doesn't seem to work. Config: http://www.intellit.nl/virtual.gif http://www.intellit.nl/outbound.gif -- Jeroen - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Access ADSL modem on WAN port
On 9/17/05, John Cianfarani [EMAIL PROTECTED] wrote: One thing you might want to double check as well is that the Block Private Networks button is not checked under Interfaces - Wan right at the bottom. Good point! However it was unchecked :( -- Jeroen - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Access ADSL modem on WAN port
On 9/17/05, Scott Ullrich [EMAIL PROTECTED] wrote: Forgive me if you mentioned this already, I have only paid half attention to this thread since so many are in it ;) I was just about the mail it when i saw your message ;) But i used this hack: http://wiki.m0n0.ch/wikka.php?wakka=AccessingModemOutsideFirewall -- Jeroen - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]