[pfSense Support] Dual Wan with PPPOE and Static isp
Hi all, I already read these posts : http://www.mail-archive.com/support@pfsense.com/msg01183.html http://www.mail-archive.com/support@pfsense.com/msg00326.html http://www.mail-archive.com/support@pfsense.com/msg00084.html but I can't get dual wan working with a PPPOE link for first cnx. I tried to do this config: Wrap with 128 meg and 128 flash, latest version of pfsense 0.84x LAN : lan side WAN : pppoe link with fixed ip address OPT1 : One static dsl link (ip and gw can be configured no dhcp) My first goal was to use the Static link for primary link but pppoe is not possible on the opt1 so I used the OPT1 for the static config. The first link is used for normal use (mail/http/game ...). The second link is used only for the Ipsec connexion to another offices (using Pfsense and Monowall) and used as backup link. I put a static routing for the remote ipsec gateways (using the opt2 gateway for next hop). This config is working fine, but when the dsl link come down (modem down or dsl link disconnected on the modem), the routing table seems to be flushed somewhere as the static routing for the ipsec gateway is down, and no more traceroute is possible to the Ipsec remote gateways. I also have some warning on the web interface about somes rules not applied. Just to be sure, I tried the same configuration on my lab only with static fixed ip on WAN and OPT1 , and all is working fine. I really want to remove my cisco's using DMVPN as the price is not the same... Does anyone already tested and validated the dual wan using pppoe on the first link ? BTW, I downgraded my wrap to the latest stable 0.70.4 version as I don't want to have errors on the web interface :) Regards, Raphaël - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Dual Wan with PPPOE and Static isp
On 9/20/05, raphael [EMAIL PROTECTED] wrote: Does anyone already tested and validated the dual wan using pppoe on thefirst link ? Yes, that's my configuration at home. PPPOE on WAN and DHCP (cable) on OPT1. LAN is my internal network (gee imagine that) and OPT2 is my DMZ. BTW, I downgraded my wrap to the latest stable0.70.4 version as I don't want to have errors on the web interface :) Well, I suspect this is the problem. .70.4 is ancient, you should upgrade to the .84 series - I can't count the number of multi wan fixes that went in between .70.4 and .84 (heck, we had a hackathon in between there!) What errors on the web interface are you referring to? --Bill
Re: [pfSense Support] Dual Wan with PPPOE and Static isp
Bill Marquette wrote: On 9/20/05, *raphael* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Does anyone already tested and validated the dual wan using pppoe on the first link ? Yes, that's my configuration at home. PPPOE on WAN and DHCP (cable) on OPT1. LAN is my internal network (gee imagine that) and OPT2 is my DMZ. Are you using wrap version or other version ? I followed the faq config on the wiki, but no success BTW, I downgraded my wrap to the latest stable 0.70.4 version as I don't want to have errors on the web interface :) Well, I suspect this is the problem. .70.4 is ancient, you should upgrade to the .84 series - I can't count the number of multi wan fixes that went in between .70.4 and .84 (heck, we had a hackathon in between there!) I downgraded to 0.70.4 as 0.84 doesn't work for dual wan. What errors on the web interface are you referring to? It's was late (aroung 11 pm) my goal was to enable the ipsec cnx, dual wan was the plus for this install, so I don't take the time to copy/paste the error. --Bill Raph - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
