Re: [pfSense Support] Dual WAN failover not working
Veiko Kukk wrote: Hi! I have dual pfsense 1.2.1, LAN interface, WAN and OPT1, last two are different ISP's. I have configured 3 carp interfaces and gateway failover for load balancer. I only need failover, not load balancing. Tried with one and two failover pools with no success. When WAN isp is disconnected, no switching to OPT1 isop occurs, thought i can see in logs that OPT1 is considered working: slbd[23449]: ICMP poll succeeded for xxx.xxx.115.18, marking service UP and the same is indicated by web interface Online as well. Still no traffic goes out through OPT1!? I hope somebody can help me with this, as I understand there must be people who have similar and working setup and pfsense should have that ability. Please, somebody confirm this bug or help me solve possible misconfiguration, I really need to have wan failover. --- Veiko - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Dual WAN failover not working
On Fri, Jan 9, 2009 at 4:14 AM, Veiko Kukk veiko.k...@krediidipank.ee wrote: Please, somebody confirm this bug or help me solve possible misconfiguration, I really need to have wan failover. It's not a bug. you have something configured wrong, and not nearly enough info for anybody to tell what. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Dual WAN failover not working
On Fri, Jan 9, 2009 at 1:14 AM, Veiko Kukk veiko.k...@krediidipank.ee wrote: Veiko Kukk wrote: Hi! I have dual pfsense 1.2.1, LAN interface, WAN and OPT1, last two are different ISP's. I have configured 3 carp interfaces and gateway failover for load balancer. I only need failover, not load balancing. Tried with one and two failover pools with no success. When WAN isp is disconnected, no switching to OPT1 isop occurs, thought i can see in logs that OPT1 is considered working: slbd[23449]: ICMP poll succeeded for xxx.xxx.115.18, marking service UP and the same is indicated by web interface Online as well. Still no traffic goes out through OPT1!? I hope somebody can help me with this, as I understand there must be people who have similar and working setup and pfsense should have that ability. Please, somebody confirm this bug or help me solve possible misconfiguration, I really need to have wan failover. --- Veiko provide a network diagram with ip addresses and maybe screen shots of the web interface. sai - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
[pfSense Support] Dual WAN failover not working
Hi! I have dual pfsense 1.2.1, LAN interface, WAN and OPT1, last two are different ISP's. I have configured 3 carp interfaces and gateway failover for load balancer. I only need failover, not load balancing. Tried with one and two failover pools with no success. When WAN isp is disconnected, no switching to OPT1 isop occurs, thought i can see in logs that OPT1 is considered working: slbd[23449]: ICMP poll succeeded for xxx.xxx.115.18, marking service UP and the same is indicated by web interface Online as well. Still no traffic goes out through OPT1!? I hope somebody can help me with this, as I understand there must be people who have similar and working setup and pfsense should have that ability. --- Veiko - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] Dual WAN failover too sensitive
Yikes, we certainly never tested for satellite latencies. The fping command line we use is: /usr/local/sbin/fping -B1.5 -t400 -r3 -q This should give us successive tries of: 400ms timeout 600ms timeout 900ms timeout 1350ms timeout I'll have to check what the fping exit code is if it's missing one of it's pings. It does look like the logic changed a hair (incorrectly I believe) from the original code, it's entirely possible that a bug was introduced. Do me a favor, run this at your command line. /usr/local/sbin/fping -B 1.5 -t400 -r3 your monitor IP here echo $? --Bill On 10/10/07, Craig Drown [EMAIL PROTECTED] wrote: Hi, we have 2 Wan connections for outgoing failover. The preferred connection is a VSAT. If we put the monitor address as the locat satellite modem it doesn't really tell us if the gateway in Singpore is working. If we put an ip address in Singpore it seems to change over when the connection is in fact fine (latency is c. 600ms) Can the slbd settings be altered at all (WRAP running 1.2rc2). Thanks. Cheers, Craig - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] dual WAN failover
Hello, Ive got a PC with 3 identical NICs in it. I have a landline internet connection and a satellite internet connection. I would like to use PFsense to use the landline when its up, and then fail over to the satellite if the landline goes down. So far, I have added my static IP address for the opt1 interface and included the gateway for that internet connection. Can someone push me in the right direction for the next step? Thanks, -M@
Re: [pfSense Support] dual WAN failover
On 9/25/05, Matt Fanady [EMAIL PROTECTED] wrote: Hello, I've got a PC with 3 identical NIC's in it. I have a landline internet connection and a satellite internet connection. I would like to use PFsense to use the landline when it's up, and then fail over to the satellite if the landline goes down. So far, I have added my static IP address for the opt1 interface and included the gateway for that internet connection. Can someone push me in the right direction for the next step? In short, multi-wan failover isn't supported at this time http://wiki.pfsense.com/wikka.php?wakka=ReleaseTimeline Show Stoppers for release version 1 SLBD outgoing LB monitoring What I do is have an identical set of rules for the second wan already configured but disabled and ready to go. It's annoying, but we're just not there yet. --Bill PS. if you haven't found it yet, http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing is useful. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
