[Elphel-support] Cascading 359
Hello Oleg, Have you had time to try connecting 4 sensor boards by cascaded two or three 359 ? Andreas attachment: office.vcf___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] 10338 Documentation
Andre, Please go ahead and send the documentation that you have for the 10338 board in whatever form it is. I'll have our HW engineer take a look to make sure he can interface it with our systems. Thanks, David ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
[Elphel-support] Force streamer to low fps
Hi, elphriends. How can I made the streamer run at, for example, 1 fps? I set FP1000SLIM=1000. With FPSFLAGS=0 the camera control interface shows 126.117 fps (green) With FPSFLAGS=1 shows 24.565 (green) With FPSFLAGS=2 shows 126.117 (green) With FPSFLAGS=3 shows 24.565 (green) This values apply for 640x480 but I have noted that the lower the frame size, the higher the minimum fps value I can achieve. Is it possible to force the streamer for running at low framerates? Thank you, Ángel. -- Elphel NC353L-369 (12-36 VDC) + Computar H2Z0414C-MP ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Cascading 359
Hi, Andreas. So far, I tried cascading them and running fpga configuration twice. It failed - probably because I used a wrong script. I will try to make double configuration work this week. And well, I'm busy with our pano camera currently. Best regards, Oleg On 7 April 2010 02:11, Andreas Bean off...@beanbox.com wrote: Hello Oleg, Have you had time to try connecting 4 sensor boards by cascaded two or three 359 ? Andreas ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com