Re: [Elphel-support] Bad line-scan output
Sounds good. Is this just the sensor board at the front that will be replaced? I would like to ship directly to the client (Louisiana). How do we proceed? Linden On Thursday, April 24, 2014, Oleg support-list@support.elphel.com wrote: Hi, On the screenshots it looks ok. The further thoughts: It might be bad sensor initialization at power up. I've seen this but don't know what causes it - normally power cycle fixes the problem and the pictures don't get bad during the work. We can replace the board in the camera so we could have a close look at it. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. -- Linden Mills-Connery Zone4 Team http://new.zone4.ca/contact 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Bad line-scan output
I was just talking to the client and they have a large event next weekend and would like to have this resolved by then. What email can I send you the ship to address? Thanks, Linden Mills-Connery Zone4 Team http://new.zone4.ca/contact 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On Fri, Apr 25, 2014 at 12:18 PM, Linden Mills-Connery lmil...@gmail.comwrote: Sounds good. Is this just the sensor board at the front that will be replaced? I would like to ship directly to the client (Louisiana). How do we proceed? Linden On Thursday, April 24, 2014, Oleg support-list@support.elphel.com wrote: Hi, On the screenshots it looks ok. The further thoughts: It might be bad sensor initialization at power up. I've seen this but don't know what causes it - normally power cycle fixes the problem and the pictures don't get bad during the work. We can replace the board in the camera so we could have a close look at it. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. -- Linden Mills-Connery Zone4 Team http://new.zone4.ca/contact 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Bad line-scan output
Hi, On the screenshots it looks ok. The further thoughts: It might be bad sensor initialization at power up. I've seen this but don't know what causes it - normally power cycle fixes the problem and the pictures don't get bad during the work. We can replace the board in the camera so we could have a close look at it. Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Bad line-scan output
Here is the output of the requested commands: https://drive.google.com/file/d/0B1DQmOIFH9KVQXA2ZVRCaTNoYVQtSUlfT1YzUzUzZVZNQUQ0/edit?usp=sharing https://drive.google.com/file/d/0B1DQmOIFH9KVVmxYZ3JIZG5IRmV3aUwwRC1UdFoxZzJBVy1j/edit?usp=sharing What are your further thoughts? Linden Mills-Connery On Mon, Apr 14, 2014 at 11:53 AM, Linden Mills-Connery lmil...@gmail.comwrote: My client is currently away and will be back on the weekend, Hopefully he will get a chance to run them on Saturday. Thanks, Linden Mills-Connery Zone4 Team http://new.zone4.ca/contact 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On Thu, Apr 10, 2014 at 2:33 PM, Oleg support-list@support.elphel.comwrote: Another way to read SDRAM phase is through phpshell: http://192.168.0.9/index.php?site=phpshell.php?command=cat%20/var/log/fpga_sdram_phase Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Bad line-scan output
My client is currently away and will be back on the weekend, Hopefully he will get a chance to run them on Saturday. Thanks, Linden Mills-Connery Zone4 Team http://new.zone4.ca/contact 205-820 Main Street Canmore, AB, T1W2B7 403-401-7215 On Thu, Apr 10, 2014 at 2:33 PM, Oleg support-list@support.elphel.comwrote: Another way to read SDRAM phase is through phpshell: http://192.168.0.9/index.php?site=phpshell.php?command=cat%20/var/log/fpga_sdram_phase Oleg ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Bad line-scan output
Hi, It looks like a bad SDRAM phase set on the system board. Not sure. Could you please check (good vs bad)? a. SDRAM phase telnet/ssh session: cat /var/log/fpga_sdram_phase b. Sensor phase: http://192.168.0.9/parsedit.php?CLK_FPGACLK_SENSORSENSOR_PHASErefreshimmediate Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 x124 Elphel, Inc. ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
