Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
On Mon, 2005-06-06 at 17:54 +0200, Kenneth Pouncey wrote: Marko No problem. I am leaving soon and we can pick it back up tomorrow. Busy day today - need to wait for system to become available. Now that is going to be interesting to see what the characters are for both ways of doing the mapping. Tomorrow then. Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 17:24 +0200, Kenneth Pouncey wrote: Marko You will need to unzip the file and use the jt400.jar file from the zip archive. java -classpath .:..:path_to_jt400.jar tn5250j.jar That should do it. If you received the new .jar file I sent you we may not have to do that right now. If it works that is :-) With the new version I get both the cp852 AND the Java Toolbox checkbox (without using CLASSPATH and jtopen)... I tested both: see attachments. All the characters are trash (I can't login either) because in the meantime we changed the logon language from Slovenian to English... So I need to change the default language back to Slovenian. I'll have to ask our IBM guy to help me with that. Please be patient (or if you know how to change it...). Marko Use the new .jar and see if the option shows up. That might not be there in the version from the site. Can not remember as it has been to long. Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 16:51 +0200, Kenneth Pouncey wrote: Marko Are you also using the jt400 toolbox? If you are we can test the cp852 by using that option. Will need help with this: I just downloaded jtopen_4_7-1.zip from IBM. How do I install this? Where must this be installed on Linux or on AS400? I followed the instructions but had no luck (using CLASSPATH)... On the properties page you can select the AS/400 Toolbox checkbox and it will Properties where? The ones from the main tn5250j menu? load the code pages from the jt400 packages instead. At least that will help us do a test. Forgot all about that. Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 16:29 +0200, Kenneth Pouncey wrote: Marko Crap. Recoding is too complex for a mere table That is a message that is obtained with the newer versions of recode. I had to downgrade to 3.5 to generate the tables. I am assuming you have 3.6 or higher. Wow now what to do. Will try to downgrade recode to 3.5. I checked some old machines that SHOULD have old versions - but Murphy's law is in action... No you can not select those others because I do not have them in the emulator yet. If you could have sent me a text file from recode then we could have put it in. The version you will be testing with will be the one I send you. Will have to change the code to implement it, recompile and then send you a new binary to test with. Huu what to do now? Just wait that I get an old version of recode and build it... Anybody else have any success with this? Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 15:25 +0200, Kenneth Pouncey wrote: Hummm will have to think about this one. Am pretty sure if I put the 1250 in there it will not work or will have to do a recode of 852. No linux machine right now either. Marko can you do a recode and place the mappings in a text file for me. For example: recode -v -h cp852 ebcdic852.txt [EMAIL PROTECTED] markod]$ recode -v -h cp852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table you can get a list of these by doing a 'recode -l'. I guess we need: IBM852/CR-LF 852/CR-LF CP852/CR-LF pcl2 pclatin2 ISO-8859-2 912/CR-LF CP912/CR-LF csISOLatin2 IBM912/CR-LF ISO8859-2 iso- ir-101 ISO_8859-2 ISO_8859-2:1987 l2 latin2 [EMAIL PROTECTED] markod]$ recode -v -h IBM852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table [EMAIL PROTECTED] markod]$ recode -v -h ISO-8859-2 Request: ISO-8859-2..:libiconv:..CHAR Shrunk to: ISO-8859-2..CHAR Recoding is too complex for a mere
Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
Welcome to the project Marko Quoting Marko Daris [EMAIL PROTECTED]: Kenneth, registered with tn5250j-general like you requested... regarding Slovenian support for tn5250j: please let me know how to proceed. Marko --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general
RE: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
Hi Marko, Welcome to the project Marko Wecome to the tn5250j-community. Met vriendelijke groeten, Best Regards, Patrick Bielen System-Administrator Stafa Holland BV Microsoft Certified Professional Sun Certified Java Programmer --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general
Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
On Mon, 2005-06-06 at 15:37 +0200, Kenneth Pouncey wrote: Also as for the font names, the one that is defined in the fonts list will be the one selected on linux. So if that is the only lucidabrigh-xxx font defined in the system fonts then that one will be loaded. The fonts on Linux are separated by encoding. For example: -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-1 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-4 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-5 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-7 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-9 So only the font name is not enough.. I mean I don't know how you get the list of fonts in Setting-Fonts. If you specify somewhere (some API) that is it iso8859-2 than those fonts should be ok. I know a long while back there was a problem with the JDK and loading the correct font but that should have been fixed a long time ago for 1.3 versions. I'm using: /usr/java/j2re1.4.2_05/bin/java -jar /usr/local/tn5250j/tn5250j.jar [EMAIL PROTECTED] markod]$ /usr/java/j2re1.4.2_05/bin/java -version java version 1.4.2_05 Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04) Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode) Make sure you are using the international versions of the JRE or JDK as well or you will not get the correct font displayed either. That has been on the list a number of times and I always forget about it when someone reports a display problem for code pages. Can you tell from -version above if this is the international one? Marko Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 13:49 +0200, Kenneth Pouncey wrote: Marko Could you tell me what codepage to use. The character set as well for windows would be good as well. Here's a link from M$: http://www.microsoft.com/globaldev/nlsweb/default.asp?submitted=424 The codepage (ANSI) is 1250 (Win). OEM is 852 / LCID 424 (DOS). I don't know which value you need - I guess the ANSI is the correct one for Windows. Font (Linux): http://nl.ijs.si/gnusl/cee/iso8859-2.html Should be iso8859-2. Note: is the Right-Click menu Settings / Fonts there is no way to select iso8859-2 - only the font name can be selected. xlsfonts | grep iso9959-2 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-demibold-r-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-r-normal--0-0-0-0-p-0-iso8859-2 ... Here's another link (look for: Slovenian) that summarizes the different codepages per OS: http://www.slovo.info/eurocp.htm Marko Quoting Marko Daris [EMAIL PROTECTED]: Kenneth, registered with tn5250j-general like you requested... regarding Slovenian support for tn5250j: please let me know how to proceed. Marko --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the
Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
Marko Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 15:37 +0200, Kenneth Pouncey wrote: Also as for the font names, the one that is defined in the fonts list will be the one selected on linux. So if that is the only lucidabrigh-xxx font defined in the system fonts then that one will be loaded. The fonts on Linux are separated by encoding. For example: -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-1 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-4 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-5 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-7 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-9 Can not remember how that is handled. I think I remember reading that the correct is loaded depending on the system and there is a way to select the default to be loaded. Anyway it is not realy important right now as we need to get the code page loaded and then we can take a look at this. So only the font name is not enough.. I mean I don't know how you get the list of fonts in Setting-Fonts. If you specify somewhere (some API) that is it iso8859-2 than those fonts should be ok. I know a long while back there was a problem with the JDK and loading the correct font but that should have been fixed a long time ago for 1.3 versions. I'm using: /usr/java/j2re1.4.2_05/bin/java -jar /usr/local/tn5250j/tn5250j.jar [EMAIL PROTECTED] markod]$ /usr/java/j2re1.4.2_05/bin/java -version java version 1.4.2_05 Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04) Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode) Sorry I was just making a comment and you should not have a problem with the newer versions. Make sure you are using the international versions of the JRE or JDK as well or you will not get the correct font displayed either. That has been on the list a number of times and I always forget about it when someone reports a display problem for code pages. Can you tell from -version above if this is the international one? I do not think so. It would have been selected when you downloaded the jdk. Still not a problem right now as we need the recode of 852 done and put in before we go any further. Kenneth Marko Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 13:49 +0200, Kenneth Pouncey wrote: Marko Could you tell me what codepage to use. The character set as well for windows would be good as well. Here's a link from M$: http://www.microsoft.com/globaldev/nlsweb/default.asp?submitted=424 The codepage (ANSI) is 1250 (Win). OEM is 852 / LCID 424 (DOS). I don't know which value you need - I guess the ANSI is the correct one for Windows. Font (Linux): http://nl.ijs.si/gnusl/cee/iso8859-2.html Should be iso8859-2. Note: is the Right-Click menu Settings / Fonts there is no way to select iso8859-2 - only the font name can be selected. xlsfonts | grep iso9959-2 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-demibold-r-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-r-normal--0-0-0-0-p-0-iso8859-2 ... Here's another link (look for: Slovenian) that summarizes the different codepages per OS: http://www.slovo.info/eurocp.htm Marko Quoting Marko Daris [EMAIL PROTECTED]: Kenneth, registered with tn5250j-general like you requested... regarding Slovenian support for tn5250j: please let me know how to proceed. Marko --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tn5250j-general
Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
Cooolll Marko will wait. Thanks Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 16:29 +0200, Kenneth Pouncey wrote: Marko Crap. Recoding is too complex for a mere table That is a message that is obtained with the newer versions of recode. I had to downgrade to 3.5 to generate the tables. I am assuming you have 3.6 or higher. Wow now what to do. Will try to downgrade recode to 3.5. I checked some old machines that SHOULD have old versions - but Murphy's law is in action... No you can not select those others because I do not have them in the emulator yet. If you could have sent me a text file from recode then we could have put it in. The version you will be testing with will be the one I send you. Will have to change the code to implement it, recompile and then send you a new binary to test with. Huu what to do now? Just wait that I get an old version of recode and build it... Anybody else have any success with this? Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 15:25 +0200, Kenneth Pouncey wrote: Hummm will have to think about this one. Am pretty sure if I put the 1250 in there it will not work or will have to do a recode of 852. No linux machine right now either. Marko can you do a recode and place the mappings in a text file for me. For example: recode -v -h cp852 ebcdic852.txt [EMAIL PROTECTED] markod]$ recode -v -h cp852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table you can get a list of these by doing a 'recode -l'. I guess we need: IBM852/CR-LF 852/CR-LF CP852/CR-LF pcl2 pclatin2 ISO-8859-2 912/CR-LF CP912/CR-LF csISOLatin2 IBM912/CR-LF ISO8859-2 iso- ir-101 ISO_8859-2 ISO_8859-2:1987 l2 latin2 [EMAIL PROTECTED] markod]$ recode -v -h IBM852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table [EMAIL PROTECTED] markod]$ recode -v -h ISO-8859-2 Request: ISO-8859-2..:libiconv:..CHAR Shrunk to: ISO-8859-2..CHAR Recoding is too complex for a mere table What is this Recoding is too complex.. msg? Am I missing something? FYI: in the version of tn5250j I have in the Change Session - Code Page I can't select 852 nor 1250 (they are not listed)... Please advise which version of JRE and TN5250j should be used for testing - so we can eliminte problems caused by using wrong versions/builds. From the list select what you think are the ones you need and put them in separate .txt files and send them to me. Let's see if this will work. Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 13:49 +0200, Kenneth Pouncey wrote: Marko Could you tell me what codepage to use. The character set as well for windows would be good as well. Here's a link from M$: http://www.microsoft.com/globaldev/nlsweb/default.asp?submitted=424 The codepage (ANSI) is 1250 (Win). OEM is 852 / LCID 424 (DOS). I don't know which value you need - I guess the ANSI is the correct one for Windows. Font (Linux): http://nl.ijs.si/gnusl/cee/iso8859-2.html Should be iso8859-2. Note: is the Right-Click menu Settings / Fonts there is no way to select iso8859-2 - only the font name can be selected. xlsfonts | grep iso9959-2 -bh-lucidabright-demibold-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-demibold-r-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-i-normal--0-0-0-0-p-0-iso8859-2 -bh-lucidabright-medium-r-normal--0-0-0-0-p-0-iso8859-2 ... Here's another link (look for: Slovenian) that summarizes the different codepages per OS: http://www.slovo.info/eurocp.htm Marko Quoting Marko Daris [EMAIL PROTECTED]: Kenneth, registered with tn5250j-general like you requested... regarding Slovenian support for tn5250j: please let me know how to proceed. Marko --- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61 plasma display: http://www.necitguy.com/?r=20 ___ Tn5250j-general mailing list Tn5250j-general@lists.sourceforge.net
Re: [Tn5250j-general] [ tn5250j-Bugs-1161363 ] Slovenian (SVN) support for TN5250j
Marko You will need to unzip the file and use the jt400.jar file from the zip archive. java -classpath .:..:path_to_jt400.jar tn5250j.jar That should do it. If you received the new .jar file I sent you we may not have to do that right now. If it works that is :-) Use the new .jar and see if the option shows up. That might not be there in the version from the site. Can not remember as it has been to long. Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 16:51 +0200, Kenneth Pouncey wrote: Marko Are you also using the jt400 toolbox? If you are we can test the cp852 by using that option. Will need help with this: I just downloaded jtopen_4_7-1.zip from IBM. How do I install this? Where must this be installed on Linux or on AS400? I followed the instructions but had no luck (using CLASSPATH)... On the properties page you can select the AS/400 Toolbox checkbox and it will Properties where? The ones from the main tn5250j menu? load the code pages from the jt400 packages instead. At least that will help us do a test. Forgot all about that. Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 16:29 +0200, Kenneth Pouncey wrote: Marko Crap. Recoding is too complex for a mere table That is a message that is obtained with the newer versions of recode. I had to downgrade to 3.5 to generate the tables. I am assuming you have 3.6 or higher. Wow now what to do. Will try to downgrade recode to 3.5. I checked some old machines that SHOULD have old versions - but Murphy's law is in action... No you can not select those others because I do not have them in the emulator yet. If you could have sent me a text file from recode then we could have put it in. The version you will be testing with will be the one I send you. Will have to change the code to implement it, recompile and then send you a new binary to test with. Huu what to do now? Just wait that I get an old version of recode and build it... Anybody else have any success with this? Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 15:25 +0200, Kenneth Pouncey wrote: Hummm will have to think about this one. Am pretty sure if I put the 1250 in there it will not work or will have to do a recode of 852. No linux machine right now either. Marko can you do a recode and place the mappings in a text file for me. For example: recode -v -h cp852 ebcdic852.txt [EMAIL PROTECTED] markod]$ recode -v -h cp852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table you can get a list of these by doing a 'recode -l'. I guess we need: IBM852/CR-LF 852/CR-LF CP852/CR-LF pcl2 pclatin2 ISO-8859-2 912/CR-LF CP912/CR-LF csISOLatin2 IBM912/CR-LF ISO8859-2 iso- ir-101 ISO_8859-2 ISO_8859-2:1987 l2 latin2 [EMAIL PROTECTED] markod]$ recode -v -h IBM852 Request: IBM852..ISO-10646-UCS-2..:libiconv:..CHAR Shrunk to: IBM852..ISO-10646-UCS-2..CHAR Recoding is too complex for a mere table [EMAIL PROTECTED] markod]$ recode -v -h ISO-8859-2 Request: ISO-8859-2..:libiconv:..CHAR Shrunk to: ISO-8859-2..CHAR Recoding is too complex for a mere table What is this Recoding is too complex.. msg? Am I missing something? FYI: in the version of tn5250j I have in the Change Session - Code Page I can't select 852 nor 1250 (they are not listed)... Please advise which version of JRE and TN5250j should be used for testing - so we can eliminte problems caused by using wrong versions/builds. From the list select what you think are the ones you need and put them in separate .txt files and send them to me. Let's see if this will work. Regards Kenneth Quoting Marko Daris [EMAIL PROTECTED]: On Mon, 2005-06-06 at 13:49 +0200, Kenneth Pouncey wrote: Marko Could you tell me what codepage to use. The character set as well for windows would be good as well. Here's a link from M$: http://www.microsoft.com/globaldev/nlsweb/default.asp?submitted=424 The codepage (ANSI) is 1250 (Win). OEM is 852 / LCID 424 (DOS). I don't know which value you need - I guess the ANSI is the correct one for Windows. Font (Linux): http://nl.ijs.si/gnusl/cee/iso8859-2.html Should be iso8859-2. Note: is the Right-Click menu Settings / Fonts there is no way to
