[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
Same issue here on 10.04. After booting the kernel log is spammed with: [ 544.968189] dvb-usb: bulk message failed: -110 (4/0) [ 544.968198] cxusb: i2c read failed ... and the system load sits on 1.00 consistently (Single core single CPU system) despite nothing showing in top and the cpu being listed as 99.3% idle. vmstat doesn't show any oddly high interrupt rates and there system is not swapping. It did NOT occur on 9.04, so it seems to be it might be some sort of regression. I have yet to reboot with the 9.04 kernel to see if that makes any difference, though. I also have two cards, a DViCO Fusion HDTV Dual Digital 4 and a LeadTek DTV2000H. Adding the following line to a file in /etc/modprobe.d did not affect the issue: options dvb-core dvb_powerdown_on_sleep=0 lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1241:f728 Belkin Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 0fe9:db78 DVICO FusionHDTV DVB-T Dual Digital 4 (ZL10353+xc2028/xc3028) (initialized) Bus 002 Device 002: ID 0fe9:db78 DVICO FusionHDTV DVB-T Dual Digital 4 (ZL10353+xc2028/xc3028) (initialized) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. Bus 001 Device 002: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lspci -v: 00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1) Flags: bus master, 66MHz, fast devsel, latency 0 Memory at f000 (32-bit, prefetchable) [size=32M] Capabilities: access denied Kernel driver in use: agpgart-amd64 Kernel modules: amd64-agp 00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2) Subsystem: Giga-byte Technology Device 0c11 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1) Subsystem: Giga-byte Technology Device 0c11 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at e400 [size=32] I/O ports at 1c00 [size=64] I/O ports at 2000 [size=64] Capabilities: access denied Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fa003000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fa004000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: ohci_hcd 00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fa005000 (32-bit, non-prefetchable) [size=256] Capabilities: access denied Kernel driver in use: ehci_hcd 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1) Subsystem: Giga-byte Technology Device a002 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 I/O ports at bc00 [size=256] I/O ports at c000 [size=128] Memory at fa001000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device 5002 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 01f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 03f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 0170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 0370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at f000 [size=16] Capabilities: access denied Kernel driver in use: pata_amd Kernel modules: pata_amd 00:0a.0 IDE interface: nVidia Corporation nForce3 Serial ATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device b002 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 I/O ports at 09f0
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
*** This bug is a duplicate of bug 459523 *** https://bugs.launchpad.net/bugs/459523 ** This bug has been marked a duplicate of bug 459523 regression: support for dvico dual digital 4 card * You can subscribe to bug 459523 by following this link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/459523/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/229879 Title: USB DVB card floods the console with recv bulk message failed -ETIMEOUT -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
This issue was triaged under Ubuntu, with a final comment asking that it be changed to new if it still persists. I've had this issue constantly through Mythbuntu 0904, 0910 and it still exists in 1004. I don't really know what information is needed to solve this, so please ask. The machine concerned is not a development machine, but please don't hesitate to ask if you need debugging tools or other aids to be installed on the machine. If you need me to install something which may be detrimental to performance, I've got no problem with taking an image of the machine beforehand and restoring it after. The machine has a Gigabyte GA-EP45-UDP motherboard with Intel P45 chipset, E5200 processor, Generic Nvidia 9800 graphics. It has two DVB cards - one Winfast DTV1000T (single tuner), and one Dvico FusionHDTV dual digital 4. On my system: r...@mythbuntu:~# uname -a Linux MythBuntu 2.6.32-24-generic-pae #42-Ubuntu SMP Fri Aug 20 15:37:22 UTC 2010 i686 GNU/Linux lsusb: r...@mythbuntu:~# lsusb Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 002: ID 045e:00f1 Microsoft Corp. Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 002: ID 15c2:0038 SoundGraph Inc. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0fe9:db98 DVICO Bus 003 Device 002: ID 0fe9:db98 DVICO Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub r...@mythbuntu:~# lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 06:00.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 62) 06:00.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 62) 06:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) 06:01.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 06:01.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) ** Changed in: linux (Ubuntu) Status: Triaged = New -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
This bug report was marked as Triaged a while ago but has not had any updated comments for quite some time. Please let us know if this issue remains in the current Ubuntu release, http://www.ubuntu.com/getubuntu/download . If the issue remains, click on the current status under the Status column and change the status back to New. Thanks. [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.] -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
This has all just gone bad for me :( Seems to have been caused by a recent Ubuntu update as it worked fine on 9.10 Karmic until I installed updates. -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
i was wondering if anyone has a work around with karmic as the whole OS become unusuable with this tuner and kernel 2.6.31 and compiling v4l-dvb does not seem to fix it yet? -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
See bug 459523, post #16 for a possible workaround to this issue. -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed -ETIMEOUT
Setting Triaged, Low. There should be enough information here for a developer to have a look and see where the root cause is, so I shall let them take it from here. If they need any more information and ask for it, please give it to them. Thank you very much. ** Summary changed: - USB DVB card floods the console with recv bulk message failed + USB DVB card floods the console with recv bulk message failed -ETIMEOUT ** Changed in: linux (Ubuntu) Importance: Undecided = Medium ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Changed in: linux (Ubuntu) Status: Confirmed = Triaged ** Description changed: Hello, I am running Ubuntu 8.04 Server (amd64) and I have a Devico FusionHDTV DVB-T Dual Digital. It is a PCI-card but the second tuner is plugged in thru USB2. The first tuner (PCI-based) is working properly. I can tune signals, watch livetv with it and I have not found any error messages when using it alone. The PIC-tuner is located at /dev/dvb/adapter0 The second tuner is only found in cold state during boot and is not activated. To solve that I had to download the bluebird-firmware from http://www.linuxtv.org/downloads/firmware/dvb-usb-bluebird-01.fw and save it in /lib/firmware. When I do a cold boot with the firmware available the second tuner (USB- tuner) is found but I sometimes receive this message during boot: dvb- usb: bulk message failed: -71 (2/0). The tuner is found and activated anyway and I see the second tuner as /dev/dvb/adapter1 with the same nodes/files as the PCI-tuner (demux0, dvr0, frontend0, net0). I have not tried to use it yet. When the computer has been online, idling, for some short random time (typically 10-15 minutes) I start to get floods of the following error message in the consol (typically one per second): dvb-usb: bulk message failed: -110 (1/0). If I do a warm reboot I sometime reboot fine (without error messages shown at boottime) and sometimes with some similar error messages. I have seen -71, -22 and -110. During a forum-search I found this tread, but it does not seams related to my problem: http://ubuntuforums.org/showthread.php?t=373192 Bug #78949 seems to be related to this one, but its old and not for my hardware. $ lsb_release -rd Description: Ubuntu 8.04 Release:8.04 $ uname -a Linux gandalf 2.6.24-16-server #1 SMP Thu Apr 10 13:15:38 UTC 2008 x86_64 GNU/Linux + + + == + + I saw from another thread the opinion that it was due to the -ETIMEOUT + value which was short in Ubuntu/Mythbuntu compared to Archlinux. I + erased mythbuntu and installed Linhes (which is based on Arch). The + problem disappeared. -- USB DVB card floods the console with recv bulk message failed -ETIMEOUT https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
Hello, I have just installed the latest ver. of mythbuntu (Jaunty), and this bug still exists. Has there been anymore updates on this issue? Thank you. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
Sorry Teej, when I get home tonight i'll update the bug after I run the command you suggested (apport-collect 229879) on Jaunty. Cheers. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
I had the same bug with Mythbuntu 9.04 and Dvico Dual Digital 4 rev 2. I saw from another thread the opinion that it was due to the -ETIMEOUT value which was short in Ubuntu/Mythbuntu compared to Archlinux. I erased mythbuntu and installed Linhes (which is based on Arch). The problem disappeared. Ozman - Original message - From: Alistair t...@hotmail.com To: ozvie...@fastmail.fm Date: Fri, 12 Jun 2009 02:14:02 - Subject: [Bug 229879] Re: USB DVB card floods the console with recv bulk message failed Sorry Teej, when I get home tonight i'll update the bug after I run the command you suggested (apport-collect 229879) on Jaunty. Cheers. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a direct subscriber of the bug. Status in “linux” source package in Ubuntu: Incomplete Status in “linux” source package in Fedora: Invalid Bug description: Hello, I am running Ubuntu 8.04 Server (amd64) and I have a Devico FusionHDTV DVB-T Dual Digital. It is a PCI-card but the second tuner is plugged in thru USB2. The first tuner (PCI-based) is working properly. I can tune signals, watch livetv with it and I have not found any error messages when using it alone. The PIC-tuner is located at /dev/dvb/adapter0 The second tuner is only found in cold state during boot and is not activated. To solve that I had to download the bluebird-firmware from http://www.linuxtv.org/downloads/firmware/dvb-usb-bluebird-01.fw and save it in /lib/firmware. When I do a cold boot with the firmware available the second tuner (USB-tuner) is found but I sometimes receive this message during boot: dvb-usb: bulk message failed: -71 (2/0). The tuner is found and activated anyway and I see the second tuner as /dev/dvb/adapter1 with the same nodes/files as the PCI-tuner (demux0, dvr0, frontend0, net0). I have not tried to use it yet. When the computer has been online, idling, for some short random time (typically 10-15 minutes) I start to get floods of the following error message in the consol (typically one per second): dvb-usb: bulk message failed: -110 (1/0). If I do a warm reboot I sometime reboot fine (without error messages shown at boottime) and sometimes with some similar error messages. I have seen -71, -22 and -110. During a forum-search I found this tread, but it does not seams related to my problem: http://ubuntuforums.org/showthread.php?t=373192 Bug #78949 seems to be related to this one, but its old and not for my hardware. $ lsb_release -rd Description: Ubuntu 8.04 Release:8.04 $ uname -a Linux gandalf 2.6.24-16-server #1 SMP Thu Apr 10 13:15:38 UTC 2008 x86_64 GNU/Linux Regards, Oz Viewer -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
Thanks for the alternative, but i'd like to stick with ubuntu/mythbuntu. I've got a rev1 card, and worst case I will just cold boot my machine everytime the error occurs. I read somewhere (http://ubuntuforums.org/showthread.php?t=616103highlight=dvico) that chris pascoes firmware is not used anymore.Would it help to use his again, if this is true? -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
or better yet start a thread with the developers of the drivers or the kernel since that is where the problem is and ubuntu dev's cannot control that instead of leeching onto a thread thats vaguely related to your problem despite the fact it has already been proven irrelevent and uneffective. On Tue, Jun 2, 2009 at 3:43 AM, Teej xtee...@googlemail.com wrote: Would it be possible to try this with Jaunty at all, so we can find out if this is fixed in a newer version. Thank you. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a direct subscriber of the bug. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
Would it be possible to try this with Jaunty at all, so we can find out if this is fixed in a newer version. Thank you. -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
I'm still having this issue, with the ** Attachment added: dmesg dump showing cold start and problem appearing when mythtv backend shut down http://launchpadlibrarian.net/27347246/C%3A%5CDocuments%20and%20Settings%5Cjkennon%5CDesktop%5Cdmesg_dump.txt -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
Sorry - dropped the entire message. I'm still having this issue, with Mythbuntu 8.04, kernel 2.6.24-24-generic, and v4l-dvb mercurial as at today. I get the issue when I do a warm boot, or when I shut down the mythbackend. It seems the reason I get characters flooding the console is probably related to the usb driver crashing, and the fact that I'm using a usb keyboard mouse. When I do a warm boot, most times I get this issue. When this happens, the mouse and keyboard won't even connect (no lights on mouse or keyboard, and no reaction to keypresses) In the attached dmesg dump it can be seen that it starts up okay (cold boot). Then I've shutdown the mythtv backend and then the error messages start. At the end, you can see the problem stops once I remove dvb_usb_cxusb from the kernel. I'm not sure how to progress this. I understand the problem is likely to be with the dvb_usb_cxusb module, or the drivers, but not the kernel. I have seen this thread on the V4L-DVB mailing list, but I can't tell if there's anything happening with it or not. Is there anything else I can do to help get a resolution? ** Attachment added: dmesg dump showing cold start and problem appearing when mythtv backend shut down http://launchpadlibrarian.net/27347727/C%3A%5CDocuments%20and%20Settings%5Cjkennon%5CDesktop%5Cdmesg_dump.txt -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
** Bug watch added: Red Hat Bugzilla #203690 https://bugzilla.redhat.com/show_bug.cgi?id=203690 ** Changed in: linux (Fedora) Importance: Undecided = Unknown ** Changed in: linux (Fedora) Status: New = Unknown ** Changed in: linux (Fedora) Remote watch: None = Red Hat Bugzilla #203690 -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 229879] Re: USB DVB card floods the console with recv bulk message failed
** Changed in: linux (Fedora) Status: Unknown = Invalid -- USB DVB card floods the console with recv bulk message failed https://bugs.launchpad.net/bugs/229879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs