Re : [Users] Mbuni Huawei E220
Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. Patrick De : Emmanuel CHANSON emmanuelchan...@gmail.com À : users@mbuni.org Envoyé le : Mar 24 août 2010, 0h 59min 12s Objet : [Users] Mbuni Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
[Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
Nokia 6230 config with Mbuni latest CVS: /etc/mbuni/mmsbox.conf: - ... # Sample conf for MMSBox using a modem (MM1) group = mmsc #id = modem id = nokiaphone type = custom custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so ... /etc/ppp/peers/mobile-auth: file /etc/ppp/peers/options-mobile user your_login password your_password connect /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat /etc/ppp/peers/options-mobile: ttyACM0 115200 lock crtscts modem passive novj nodefaultroute nodetach noipdefault usepeerdns noauth hide-password persist holdoff 10 maxfail 0 debug /etc/ppp/chatscripts/mobile-modem.chat: --- ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'ATQ0' 'OK-AT-OK' 'ATZ' TIMEOUT 3 'OK' @/etc/ppp/chatscripts/pin.NONE 'OK-AT-OK' 'ATI' 'OK' 'ATZ' 'OK' @/etc/ppp/chatscripts/mode.NONE 'OK-AT-OK' @/etc/ppp/chatscripts/apn 'OK' 'ATDT*99***1#' TIMEOUT 30 CONNECT '' /etc/ppp/chatscripts/mode.NONE: - AT /etc/ppp/chatscripts/pin.NONE: - AT /etc/ppp/chatscripts/apn: AT+CGDCONT=1,IP,your_mms_apn You need 2 additionnal scripts to be launched when modem got the connection: /etc/ppp/ip-up: #!/bin/sh IFNAME=$1 LOCAL_IP=$4 REMOTE_IP=$5 IPPARAM=$6 MMS_PROXY=192.168.39.201 /sbin/ip route add to 192.168.39.201 dev ppp0 # routing has been set up, so: ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid /etc/ppp/ip-down: - # remove pid file rm -rf /var/run/ppp0-mbuni.pid Regards, Emmanuel 2010/8/24 patrick meye patrick_m...@yahoo.fr Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. Patrick -- *De :* Emmanuel CHANSON emmanuelchan...@gmail.com *À :* users@mbuni.org *Envoyé le :* Mar 24 août 2010, 0h 59min 12s *Objet :* [Users] Mbuni Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
Thanks Emmanuel will get back to you. Merci! On 24 August 2010 09:45, Emmanuel CHANSON emmanuelchan...@gmail.com wrote: Nokia 6230 config with Mbuni latest CVS: /etc/mbuni/mmsbox.conf: - ... # Sample conf for MMSBox using a modem (MM1) group = mmsc #id = modem id = nokiaphone type = custom custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so ... /etc/ppp/peers/mobile-auth: file /etc/ppp/peers/options-mobile user your_login password your_password connect /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat /etc/ppp/peers/options-mobile: ttyACM0 115200 lock crtscts modem passive novj nodefaultroute nodetach noipdefault usepeerdns noauth hide-password persist holdoff 10 maxfail 0 debug /etc/ppp/chatscripts/mobile-modem.chat: --- ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'ATQ0' 'OK-AT-OK' 'ATZ' TIMEOUT 3 'OK' @/etc/ppp/chatscripts/pin.NONE 'OK-AT-OK' 'ATI' 'OK' 'ATZ' 'OK' @/etc/ppp/chatscripts/mode.NONE 'OK-AT-OK' @/etc/ppp/chatscripts/apn 'OK' 'ATDT*99***1#' TIMEOUT 30 CONNECT '' /etc/ppp/chatscripts/mode.NONE: - AT /etc/ppp/chatscripts/pin.NONE: - AT /etc/ppp/chatscripts/apn: AT+CGDCONT=1,IP,your_mms_apn You need 2 additionnal scripts to be launched when modem got the connection: /etc/ppp/ip-up: #!/bin/sh IFNAME=$1 LOCAL_IP=$4 REMOTE_IP=$5 IPPARAM=$6 MMS_PROXY=192.168.39.201 /sbin/ip route add to 192.168.39.201 dev ppp0 # routing has been set up, so: ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid /etc/ppp/ip-down: - # remove pid file rm -rf /var/run/ppp0-mbuni.pid Regards, Emmanuel 2010/8/24 patrick meye patrick_m...@yahoo.fr Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. Patrick -- *De :* Emmanuel CHANSON emmanuelchan...@gmail.com *À :* users@mbuni.org *Envoyé le :* Mar 24 août 2010, 0h 59min 12s *Objet :* [Users] Mbuni Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
HI Emmanuel, ppp connection is ok using your config but still getting : .. *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 handle_mm1 [mmsbox-mm1] [n/a] GPRS turned off returned: 0* .. Please did use solve this issue? tail -f /var/log/messages * .. Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 -- /dev/ttyUSB0 Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded Aug 25 04:56:53 localhost pppd[5547]: local IP address 10.236.24.83 Aug 25 04:56:53 localhost pppd[5547]: remote IP address 192.168.111.111 Aug 25 04:56:53 localhost pppd[5547]: primary DNS address 165.21.83.88 Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address 165.21.100.88 Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 bytes. .* Thanks On 24 August 2010 20:54, Emmanuel CHANSON emmanuelchan...@gmail.com wrote: Thanks to Piotr who help me with pppd BR Emmanuel 2010/8/24 Michel TOKO tokomic...@gmail.com Thanks Emmanuel will get back to you. Merci! On 24 August 2010 09:45, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: Nokia 6230 config with Mbuni latest CVS: /etc/mbuni/mmsbox.conf: - ... # Sample conf for MMSBox using a modem (MM1) group = mmsc #id = modem id = nokiaphone type = custom custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so ... /etc/ppp/peers/mobile-auth: file /etc/ppp/peers/options-mobile user your_login password your_password connect /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat /etc/ppp/peers/options-mobile: ttyACM0 115200 lock crtscts modem passive novj nodefaultroute nodetach noipdefault usepeerdns noauth hide-password persist holdoff 10 maxfail 0 debug /etc/ppp/chatscripts/mobile-modem.chat: --- ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'ATQ0' 'OK-AT-OK' 'ATZ' TIMEOUT 3 'OK' @/etc/ppp/chatscripts/pin.NONE 'OK-AT-OK' 'ATI' 'OK' 'ATZ' 'OK' @/etc/ppp/chatscripts/mode.NONE 'OK-AT-OK' @/etc/ppp/chatscripts/apn 'OK' 'ATDT*99***1#' TIMEOUT 30 CONNECT '' /etc/ppp/chatscripts/mode.NONE: - AT /etc/ppp/chatscripts/pin.NONE: - AT /etc/ppp/chatscripts/apn: AT+CGDCONT=1,IP,your_mms_apn You need 2 additionnal scripts to be launched when modem got the connection: /etc/ppp/ip-up: #!/bin/sh IFNAME=$1 LOCAL_IP=$4 REMOTE_IP=$5 IPPARAM=$6 MMS_PROXY=192.168.39.201 /sbin/ip route add to 192.168.39.201 dev ppp0 # routing has been set up, so: ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid /etc/ppp/ip-down: - # remove pid file rm -rf /var/run/ppp0-mbuni.pid Regards, Emmanuel 2010/8/24 patrick meye patrick_m...@yahoo.fr Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. Patrick -- *De :* Emmanuel CHANSON emmanuelchan...@gmail.com *À :* users@mbuni.org *Envoyé le :* Mar 24 août 2010, 0h 59min 12s *Objet :* [Users] Mbuni Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
Hello Richard, In my case as an MMS, because I use a MMS APN given to all mobile contract here. Emmanuel 2010/8/24 Richard Eicher[Skycore] reic...@skycore.com Hi Emmanuel, Question regarding the MM1 Modem – Was your billing attributed as SMS and Data or as an MMS? Richard Eicher Jr. Skycore LLC Skycore.com / Cellyspace.com reic...@skycore.com O: 617 314 7688 x706 M: 781 492 6436 Skype: riche127 [image: skycore_logoWebWhite_small] *From:* users-boun...@mbuni.org [mailto:users-boun...@mbuni.org] *On Behalf Of *Emmanuel CHANSON *Sent:* Tuesday, August 24, 2010 4:54 PM *To:* users@mbuni.org *Subject:* Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1) Thanks to Piotr who help me with pppd BR Emmanuel 2010/8/24 Michel TOKO tokomic...@gmail.com Thanks Emmanuel will get back to you. Merci! On 24 August 2010 09:45, Emmanuel CHANSON emmanuelchan...@gmail.com wrote: Nokia 6230 config with Mbuni latest CVS: /etc/mbuni/mmsbox.conf: - ... # Sample conf for MMSBox using a modem (MM1) group = mmsc #id = modem id = nokiaphone type = custom custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so ... /etc/ppp/peers/mobile-auth: file /etc/ppp/peers/options-mobile user your_login password your_password connect /usr/sbin/chat -v -t15 -f /etc/ppp/chatscripts/mobile-modem.chat /etc/ppp/peers/options-mobile: ttyACM0 115200 lock crtscts modem passive novj nodefaultroute nodetach noipdefault usepeerdns noauth hide-password persist holdoff 10 maxfail 0 debug /etc/ppp/chatscripts/mobile-modem.chat: --- ABORT 'BUSY' ABORT 'NO CARRIER' ABORT 'VOICE' ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'DELAYED' REPORT CONNECT TIMEOUT 6 '' 'ATQ0' 'OK-AT-OK' 'ATZ' TIMEOUT 3 'OK' @/etc/ppp/chatscripts/pin.NONE 'OK-AT-OK' 'ATI' 'OK' 'ATZ' 'OK' @/etc/ppp/chatscripts/mode.NONE 'OK-AT-OK' @/etc/ppp/chatscripts/apn 'OK' 'ATDT*99***1#' TIMEOUT 30 CONNECT '' /etc/ppp/chatscripts/mode.NONE: - AT /etc/ppp/chatscripts/pin.NONE: - AT /etc/ppp/chatscripts/apn: AT+CGDCONT=1,IP,your_mms_apn You need 2 additionnal scripts to be launched when modem got the connection: /etc/ppp/ip-up: #!/bin/sh IFNAME=$1 LOCAL_IP=$4 REMOTE_IP=$5 IPPARAM=$6 MMS_PROXY=192.168.39.201 /sbin/ip route add to 192.168.39.201 dev ppp0 # routing has been set up, so: ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid /etc/ppp/ip-down: - # remove pid file rm -rf /var/run/ppp0-mbuni.pid Regards, Emmanuel 2010/8/24 patrick meye patrick_m...@yahoo.fr Hi Emmanuel, I need config files using Nokia 6230,can you send it to me please?? Regards. *Patrick* -- *De :* Emmanuel CHANSON emmanuelchan...@gmail.com *À :* users@mbuni.org *Envoyé le :* Mar 24 août 2010, 0h 59min 12s *Objet :* [Users] Mbuni Huawei E220 Does anyone has already configured a Huawei E220 with Mbuni and pppd ? I am looking for any config with E220. Note: I use actually a Nokia 6230 that work well if anybody needs config files. Regards, -- Emmanuel ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users ___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users image001.gif___ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
sorry, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 is it normal ? On 24 August 2010 23:38, Michel TOKO tokomic...@gmail.com wrote: Emmanuel, resultat du netstat, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 un problème ici ? On 24 August 2010 23:33, Michel TOKO tokomic...@gmail.com wrote: Yes i did. *port=8080;mmsc-url= http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100* On 24 August 2010 23:24, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: Michel, *in my config file the mmsc proxy is set as suggested. ** mmsc-url=http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 * Did you replace these values by your config used in your provider network ? ie: your mmsc ip address your mmsc port ? and mms url ? You have to. Otherwise second solution below with routing. Emmanuel 2010/8/25 Michel TOKO tokomic...@gmail.com Thanks Emmanuel, in my config file the mmsc proxy is set as suggested. * mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; May be i've to check your second advice * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to telnet mms-c_ip mmsc_port to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Will get back to you very soon. Thanks On 24 August 2010 22:27, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: Hello Michel, *.. **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 handle_mm1 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 ..* I think Mbuni can not reach your MMS-C (provider), so try to see if your MMS-C proxy address and port is correct inside mmsbox.conf: In my case: *custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100* this part: *mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; * I think your problem may be here.* **Or * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to telnet mms-c_ip mmsc_port to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Regards, Emmanuel 2010/8/24 Michel TOKO tokomic...@gmail.com HI Emmanuel, ppp connection is ok using your config but still getting : .. *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 handle_mm1 [mmsbox-mm1] [n/a] GPRS turned off returned: 0* .. Please did use solve this issue? tail -f /var/log/messages * .. Aug 25 04:56:49 localhost pppd[5547]: Serial connection established. Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 --
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
Yes it should be ok Try to reach your MMS-C using *telnet 165.21.42.84 8080* when ppp0 is up and rounting is done. Or do this test with mbuni stop and launch ppd by hand *'pppd call mobile-auth'* If you succeed then maybe you post a bad MMS. What is the command you run to post a MMS to Mbuni ? Emmanuel 2010/8/25 Michel TOKO tokomic...@gmail.com sorry, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 is it normal ? On 24 August 2010 23:38, Michel TOKO tokomic...@gmail.com wrote: Emmanuel, resultat du netstat, netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.111.111 0.0.0.0 255.255.255.255 UH0 0 0 ppp0 165.21.42.840.0.0.0 255.255.255.255 UH0 0 0 ppp0 xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG0 0 0 eth0 un problème ici ? On 24 August 2010 23:33, Michel TOKO tokomic...@gmail.com wrote: Yes i did. *port=8080;mmsc-url= http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100* On 24 August 2010 23:24, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: Michel, *in my config file the mmsc proxy is set as suggested. ** mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; * Did you replace these values by your config used in your provider network ? ie: your mmsc ip address your mmsc port ? and mms url ? You have to. Otherwise second solution below with routing. Emmanuel 2010/8/25 Michel TOKO tokomic...@gmail.com Thanks Emmanuel, in my config file the mmsc proxy is set as suggested. * mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; May be i've to check your second advice * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to telnet mms-c_ip mmsc_port to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Will get back to you very soon. Thanks On 24 August 2010 22:27, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: Hello Michel, *.. **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 handle_mm1 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 ..* I think Mbuni can not reach your MMS-C (provider), so try to see if your MMS-C proxy address and port is correct inside mmsbox.conf: In my case: *custom-settings = gprs-on=pppd call mobile-auth;gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100* this part: *mmsc-url= http://xxx.xxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100; * I think your problem may be here.* **Or * maybe you can not reach your mms-c cause of some routing not configured, check your routing table after ppp0 is up and you can try to telnet mms-c_ip mmsc_port to see if you reach it. If not then you have to add a route to reach it, by hand first to test, then inside /etc/ppp/ip-up. Regards, Emmanuel 2010/8/24 Michel TOKO tokomic...@gmail.com HI Emmanuel, ppp connection is ok using your config but still getting : .. *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)! 2010-08-25
Re: [Users] Mbuni Nokia 6230 configuration (mmsbox-mm1)
What is you custom setting in mmsbox.conf? It seems you keep ppp0.pid and didn't manage using ppp0-mbuni.pid. Mbuni wait until this ppp0.pid file is created before sending the MMS BUT Mbuni doesn't wait that the routing is done to reach MMSC so using ip-up script you should create a ppp0-mbuni.pid lynk (symlink to ppp0.pid) This symlink is created as soon as routing is done in ip-up script * mmsbox.conf in custom settings: gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1* ip-down should contain the command to remove this symlink when ppp0 connection is closed Emmanuel 2010/8/25 Michel TOKO tokomic...@gmail.com This is a part of the log. If you need more than this please let me know. 2010-08-25 08:17:34 [6800] [5] INFO: mmsbox_mm1.c:659 start_gprs [mmsbox-mm1] [n/a] waiting for connection: 0, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:39 [6800] [5] INFO: mmsbox_mm1.c:659 start_gprs [mmsbox-mm1] [n/a] waiting for connection: 1, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:44 [6800] [5] INFO: mmsbox_mm1.c:659 start_gprs [mmsbox-mm1] [n/a] waiting for connection: 2, pid=7470 cpid=0, ifexited=1, exitstatus=5 chat: Aug 25 08:17:47 CONNECT 115200 Serial connection established. using channel 38 Using interface ppp0 Connect: ppp0 -- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0x600b2141 pcomp accomp] rcvd [LCP ConfRej id=0x1 magic 0x600b2141] sent [LCP ConfReq id=0x2 asyncmap 0x0 pcomp accomp] rcvd [LCP ConfAck id=0x2 asyncmap 0x0 pcomp accomp] 2010-08-25 08:17:49 [6800] [5] INFO: mmsbox_mm1.c:379 handle_mm1 [mmsbox-mm1] [n/a] start_gprs returned PID: 7470 2010-08-25 08:17:49 [6800] [5] DEBUG: WSP: Mapping `image/gif', WSP 1.2 to 0x001d. rcvd [LCP ConfReq id=0x1 mru 1500 asyncmap 0x0 pcomp accomp auth pap] sent [LCP ConfAck id=0x1 mru 1500 asyncmap 0x0 pcomp accomp auth pap] sent [PAP AuthReq id=0x1 user=65eideas password=hidden] rcvd [PAP AuthAck id=0x1 Welcome!] Remote message: Welcome! PAP authentication succeeded sent [CCP ConfReq id=0x1 deflate 15 deflate(old#) 15] sent [IPCP ConfReq id=0x1 addr 0.0.0.0 ms-dns1 0.0.0.0 ms-dns3 0.0.0.0] rcvd [IPCP ConfReq id=0x1 addr 192.168.111.111] sent [IPCP ConfAck id=0x1 addr 192.168.111.111] rcvd [LCP ProtRej id=0x26 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 addr 10.237.205.147 ms-dns1 165.21.83.88 ms-dns3 165.21.100.88] sent [IPCP ConfReq id=0x2 addr 10.237.205.147 ms-dns1 165.21.83.88 ms-dns3 165.21.100.88] rcvd [IPCP ConfAck id=0x2 addr 10.237.205.147 ms-dns1 165.21.83.88 ms-dns3 165.21.100.88] local IP address 10.237.205.147 remote IP address 192.168.111.111 primary DNS address 165.21.83.88 secondary DNS address 165.21.100.88 *Script /etc/ppp/ip-up started (pid 7498)* *Script /etc/ppp/ip-up finished (pid 7498), status = 0x1 2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:628 fetch_content [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host* 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string at 0xb4c0ba68: 2010-08-25 08:20:58 [6800] [5] DEBUG: len: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: size: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: immutable: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string dump ends. *2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:499 handle_mm1 [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* 2010-08-25 08:20:58 [6800] [5] INFO: mmsbox_mm1.c:524 handle_mm1 [mmsbox-mm1] [n/a] GPRS turned off returned: 0 2010-08-25 08:20:58 [6800] [20] INFO: mmsbox_mm1.c:345 send_msg [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) 2010-08-25 08:20:58 [6800] [20] INFO: bearerbox.c:1519 sendMsg [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From +x/TYPE=PLMN, to xx/TYPE=PLMN, msgsize=5517: msgid=[N/A] Terminating on signal 15 Connect time 3.2 minutes. *Sent 300 bytes, received 676 bytes.* Script /etc/ppp/ip-down started (pid 7507) sent [LCP TermReq id=0x3 User request] Script /etc/ppp/ip-down finished (pid 7507), status = 0xff rcvd [LCP TermAck id=0x3 User request] Connection terminated. On 25 August 2010 00:36, Emmanuel CHANSON emmanuelchan...@gmail.comwrote: You can reach your MMS-C as you successfully open a telnet connection on port 8080 so this is something else. Try to remove the smil part and send just a text? $url=$path.?username=$usernamepassword=$passwordto=xxsubject=MBUNItext=test; Other thing Try to check your logs to see if the fetch error happens before ppp0 connection is up? Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing is done in order to reach MMS-C. Check also that /var/run/ppp0-mbuni.pid is correclty removed after each connection close. Try