Re: Keep-alive script available
Or you can set timeout to 0 and server will not drop connection. Regards, Alex Philip Herlihy wrote: One of the most useful features of VNC is the facility to set up a reverse connection, initiated from the server to a listening client. Providing the router at the client end can be configured to pass through port 5500, there is no need to mess with firewalls and routers at the server end. As the expertise is usually at the client end - that's a good deal! However, that leaves the job of maintaining the connection, re-connecting as necessary, at the server end. Many times I've had someone set up a connection only for it to drop a few minutes after they have left. I've finally (!) got a script working which provides one solution to this. The script, which uses only built-in NT commands (tested under XP), sets up a connection and then periodically monitors that it is still live, automatically re-establishing the connection if it has dropped. This version is for a client at a location with a known IP address, but it could be adapted to use a domain address (including one obtained via dynamic DNS). If you'd like a copy, drop me a note. Beyond keeping the attribution in the comments, there are no strings attached. Phil Herlihy ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
RE: Keep-alive script available
That might have been a wasted few hours, writing that script, then! I'd looked for a suitable configuration but hadn't found one. Do you mean to say that the connection will survive periods of network glitch/error/whatever if this setting is used? Or is there still a role for my script? Grateful for any further clarification you can offer on this - as the perceived unreliability of VNC connections in some situations has led me to use RDC whenever that's an option. Philip Herlihy Email: phi...@herlihy.eu.com Tel: 020 8521 9157 Mobile: 07931 546660 Fax: 0870 0511055 -Original Message- From: vnc-list-boun...@realvnc.com [mailto:vnc-list-boun...@realvnc.com] On Behalf Of Alex Pelts Sent: 27 September 2009 17:12 To: Philip Herlihy Cc: vnc-list@realvnc.com Subject: Re: Keep-alive script available Or you can set timeout to 0 and server will not drop connection. Regards, Alex Philip Herlihy wrote: One of the most useful features of VNC is the facility to set up a reverse connection, initiated from the server to a listening client. Providing the router at the client end can be configured to pass through port 5500, there is no need to mess with firewalls and routers at the server end. As the expertise is usually at the client end - that's a good deal! However, that leaves the job of maintaining the connection, re-connecting as necessary, at the server end. Many times I've had someone set up a connection only for it to drop a few minutes after they have left. I've finally (!) got a script working which provides one solution to this. The script, which uses only built-in NT commands (tested under XP), sets up a connection and then periodically monitors that it is still live, automatically re-establishing the connection if it has dropped. This version is for a client at a location with a known IP address, but it could be adapted to use a domain address (including one obtained via dynamic DNS). If you'd like a copy, drop me a note. Beyond keeping the attribution in the comments, there are no strings attached. Phil Herlihy ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
RE: Keep-alive script available
That might have been a wasted few hours, writing that script, then! I'd looked for a suitable configuration but hadn't found one. Do you mean to say that the connection will survive periods of network glitch/error/whatever if this setting is used? Or is there still a role for my script? Grateful for any further clarification you can offer on this - as the perceived unreliability of VNC connections in some situations has led me to use RDC whenever that's an option. I wouldn't write it off just yet... Whenever I have network issues my VNC connections are usually amongst the first things to drop; having a keep-alive script constantly pinging and reestablishing connections is definitely one of those why doesn't it have... features imho. ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
Re: Keep-alive script available
You need to set Disconnect idle client in the Connections tab to 0. This will prevent vnc server itself from dropping connections. That is a server configuration. If connection broken for some reason it is up to tcp layer to reestablish connection. It normally can do this if link is restored within timeout time, which is about 10 minutes if I remember correctly. If you are using vpn to connect to your server, in my experience, vpn wold be the source of lost connection much more than vnc. To keep vpn going you can run some sort of IM client on the viewer side and it will periodically ping the server thus keeping connection alive. I use vnc for work and keep session going for 10-11 hours straight without any problems. Regards, Alex Philip Herlihy wrote: That might have been a wasted few hours, writing that script, then! I'd looked for a suitable configuration but hadn't found one. Do you mean to say that the connection will survive periods of network glitch/error/whatever if this setting is used? Or is there still a role for my script? Grateful for any further clarification you can offer on this - as the perceived unreliability of VNC connections in some situations has led me to use RDC whenever that's an option. Philip Herlihy Email: phi...@herlihy.eu.com Tel: 020 8521 9157 Mobile:07931 546660 Fax: 0870 0511055 -Original Message- From: vnc-list-boun...@realvnc.com [mailto:vnc-list-boun...@realvnc.com] On Behalf Of Alex Pelts Sent: 27 September 2009 17:12 To: Philip Herlihy Cc: vnc-list@realvnc.com Subject: Re: Keep-alive script available Or you can set timeout to 0 and server will not drop connection. Regards, Alex Philip Herlihy wrote: One of the most useful features of VNC is the facility to set up a reverse connection, initiated from the server to a listening client. Providing the router at the client end can be configured to pass through port 5500, there is no need to mess with firewalls and routers at the server end. As the expertise is usually at the client end - that's a good deal! However, that leaves the job of maintaining the connection, re-connecting as necessary, at the server end. Many times I've had someone set up a connection only for it to drop a few minutes after they have left. I've finally (!) got a script working which provides one solution to this. The script, which uses only built-in NT commands (tested under XP), sets up a connection and then periodically monitors that it is still live, automatically re-establishing the connection if it has dropped. This version is for a client at a location with a known IP address, but it could be adapted to use a domain address (including one obtained via dynamic DNS). If you'd like a copy, drop me a note. Beyond keeping the attribution in the comments, there are no strings attached. Phil Herlihy ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list ___ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list