Re: [X2Go-User] Building x2goclient from sources
Hi Kermit, On Mo 26 Jan 2015 18:48:42 CET, Short, Kermit wrote: Greetings! I am trying to build the client from source tarballs. I am following the steps outlined at http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:x2goclient I have downloaded and untarred the nx-libs_3.5.0.13 full tarball. That tarball is rather old. We are at 3.5.0.28 at the moment. You only need the nx-libs-lite tarball for X2Go's client-side software components (X2Go Client, PyHoca-*). [1] after I cd nx-libs_3.5.0.13/nxproxy autoconf ./configure --prefix=/custom make Extract that tarball and run make sudo make install That should be it. See the shipped-with Makefile for details. Mike [1] http://code.x2go.org/releases/source/nx-libs/nx-libs-3.5.0.28-lite.tar.gz -- DAS-NETZWERKTEAM mike gabriel, herweg 7, 24357 fleckeby fon: +49 (1520) 1976 148 GnuPG Key ID 0x25771B31 mail: mike.gabr...@das-netzwerkteam.de, http://das-netzwerkteam.de freeBusy: https://mail.das-netzwerkteam.de/freebusy/m.gabriel%40das-netzwerkteam.de.xfb pgpA5E93t_WmN.pgp Description: Digitale PGP-Signatur ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] Building x2goclient from sources
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Am 26.01.2015 um 19:49 schrieb Short, Kermit: [lots of trouble compiling] Kermit, I'm not too sure if you can expect that many qualified replies to a compile question on x2go-_user_. Not saying it's off-topic here, but you might have better luck over on x2go-_dev_, where the diehard coders hang out. ;-) To subscribe there, go to http://lists.x2go.org/listinfo/x2go-dev - -Stefan - -- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243 -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.22 (MingW32) iQEcBAEBAgAGBQJUxpKtAAoJEG7d9BjNvlEZMeYIAJc+m29+JZgpDt/pgA/aFnQP Lb1+p3AxeqRgwp/jleMk5pFRgyTBlhm9+PAalKek7C8czX+RO70h1wkz6muyEDNb H/egI/wJOiOeCp0erca4uvAAOWU1NpFjT1JClkfPTp6S5DiJCSaKzcNO5A4wNOJ6 9uZO1HAo6FvCknyszTWO4PWMvyxqVFywCqRWQ6oOkDUIez4cw368gSbHFYCBbpPG IV4k8mZFtHuaTYWJqylxipBGdlSOSlvy1JW1RS0ifJGt9wPFT/Eghy3HABJtNP5Q zQE26leBMHrYt0U9meHhaZcDdLbMZ1iZ5dqbWZ5TKnWndxMDu85afzfD28mKdok= =5qID -END PGP SIGNATURE- ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] Building x2goclient from sources
Hi Stefan, Between some notes I'd taken last year when I worked on this, and some blind luck in guessing, I was able to get the client to build. I do have some further questions, but I'll probably ask those on the dev list. Thanks! -- Kermit Short, RHCE, RHCVA Sr. Solutions Architect From: x2go-user-boun...@lists.x2go.org [x2go-user-boun...@lists.x2go.org] on behalf of Stefan Baur [x2go-m...@baur-itcs.de] Sent: Monday, January 26, 2015 12:17 PM To: x2go-user@lists.x2go.org Subject: Re: [X2Go-User] Building x2goclient from sources -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Am 26.01.2015 um 19:49 schrieb Short, Kermit: [lots of trouble compiling] Kermit, I'm not too sure if you can expect that many qualified replies to a compile question on x2go-_user_. Not saying it's off-topic here, but you might have better luck over on x2go-_dev_, where the diehard coders hang out. ;-) To subscribe there, go to http://lists.x2go.org/listinfo/x2go-dev - -Stefan - -- BAUR-ITCS UG (haftungsbeschränkt) Geschäftsführer: Stefan Baur Eichenäckerweg 10, 89081 Ulm | Registergericht Ulm, HRB 724364 Fon/Fax 0731 40 34 66-36/-35 | USt-IdNr.: DE268653243 -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.22 (MingW32) iQEcBAEBAgAGBQJUxpKtAAoJEG7d9BjNvlEZMeYIAJc+m29+JZgpDt/pgA/aFnQP Lb1+p3AxeqRgwp/jleMk5pFRgyTBlhm9+PAalKek7C8czX+RO70h1wkz6muyEDNb H/egI/wJOiOeCp0erca4uvAAOWU1NpFjT1JClkfPTp6S5DiJCSaKzcNO5A4wNOJ6 9uZO1HAo6FvCknyszTWO4PWMvyxqVFywCqRWQ6oOkDUIez4cw368gSbHFYCBbpPG IV4k8mZFtHuaTYWJqylxipBGdlSOSlvy1JW1RS0ifJGt9wPFT/Eghy3HABJtNP5Q zQE26leBMHrYt0U9meHhaZcDdLbMZ1iZ5dqbWZ5TKnWndxMDu85afzfD28mKdok= =5qID -END PGP SIGNATURE- ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Building x2goclient from sources
Greetings! I am trying to build the client from source tarballs. I am following the steps outlined at http://wiki.x2go.org/doku.php/wiki:development:build-howto-linux:x2goclient I have downloaded and untarred the nx-libs_3.5.0.13 full tarball. after I cd nx-libs_3.5.0.13/nxproxy autoconf ./configure --prefix=/custom make I get the following: if [ -x makedepend ] ; then \ makedepend -I. -I../nxcomp -I. -I../nxcomp \ -I/usr/include/g++ -I/usr/include/g++-3 -f Makefile Main.c 2/dev/null; \ fi touch depend.status gcc -c -O3 -DVERSION=\3.5.0\ -DPACKAGE_NAME=\\ -DPACKAGE_TARNAME=\\ -DPACKAGE_VERSION=\\ -DPACKAGE_STRING=\\ -DPACKAGE_BUGREPORT=\\ -DPACKAGE_URL=\\ -DX_DISPLAY_MISSING=1 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -I. -I../nxcomp Main.c g++ -O3 -DVERSION=\3.5.0\ -DPACKAGE_NAME=\\ -DPACKAGE_TARNAME=\\ -DPACKAGE_VERSION=\\ -DPACKAGE_STRING=\\ -DPACKAGE_BUGREPORT=\\ -DPACKAGE_URL=\\ -DX_DISPLAY_MISSING=1 -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -o nxproxy Main.o -L../nxcomp -lXcomp /usr/bin/ld: cannot find -lXcomp collect2: error: ld returned 1 exit status make: *** [nxproxy] Error 1 Do I have to compile/install anything in the nx-libs parent directory beforehand? Thanks! -- Kermit Short, RHCE, RHCVA Sr. Solutions Architect ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user