CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 00:54:39 Log message: SiS driver: - save/restore some important scratch registers (fix Leave/EnterVT if custom panel is connected) Modified files: xc/programs/Xserver/hw/xfree86/drivers/sis/: sis.h sis_driver.c sis_vb.c Revision ChangesPath 1.97 +3 -2 xc/programs/Xserver/hw/xfree86/drivers/sis/sis.h 1.163 +26 -9 xc/programs/Xserver/hw/xfree86/drivers/sis/sis_driver.c 1.33 +3 -5 xc/programs/Xserver/hw/xfree86/drivers/sis/sis_vb.c ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 04:12:46 Log message: 660. Fix a bug in the fbgc.c code that caused the even stipple code path to be used instead of the odd stipple path. Basically causing glitches in rendering or no rendering at all. (Alan Hourihane). Modified files: xc/programs/Xserver/fb/: fbgc.c xc/programs/Xserver/hw/xfree86/: CHANGELOG Revision ChangesPath 1.13 +4 -4 xc/programs/Xserver/fb/fbgc.c 3.3029+4 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 05:49:21 Log message: update Modified files: xc/programs/Xserver/hw/xfree86/: CHANGELOG Revision ChangesPath 3.3030+2 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 05:51:34 Log message: 661. Update Brazilian keyboard map (Ricardo Y. Igarashi). Modified files: xc/programs/xkbcomp/symbols/pc/: br Revision ChangesPath 1.4 +4 -1 xc/programs/xkbcomp/symbols/pc/br ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 09:49:27 Log message: SiS driver: - Invert XV contrast setting (was the wrong way) Modified files: xc/programs/Xserver/hw/xfree86/drivers/sis/: sis_opt.c sis_video.c Revision ChangesPath 1.50 +1 -1 xc/programs/Xserver/hw/xfree86/drivers/sis/sis_opt.c 1.43 +1 -1 xc/programs/Xserver/hw/xfree86/drivers/sis/sis_video.c ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: )
[EMAIL PROTECTED] CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 11:01:57 xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-aout-ix86 Update of /home/x-cvs/xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-aout-ix86 In directory public.xfree86.org:/tmp/cvs-serv45999/OpenBSD-aout-ix86 Log Message: Directory /home/x-cvs/xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-aout-ix86 added to the repository ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 11:03:02 Log message: add bindist files for older a.out OpenBSD systems Added files: xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-aout-ix86/: bin-excl bin-list dir drivers-upd etc-dir etc-list fsrv-list host.def lib-excl lib-list man-excl man-list mod-list nest-list prog-excl prog-list prt-list update-upd var-dir var-list vfb-list xserv-list ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 12:40:02 Log message: update Modified files: xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-ix86/: bin-list Revision ChangesPath 1.19 +43 -29 xc/programs/Xserver/hw/xfree86/etc/bindist/OpenBSD-ix86/bin-list ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 15:29:56 Log message: update Modified files: xc/programs/Xserver/hw/xfree86/etc/bindist/NetBSD-ix86/: bin-list Revision ChangesPath 1.16 +48 -2 xc/programs/Xserver/hw/xfree86/etc/bindist/NetBSD-ix86/bin-list ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 03/12/09 17:50:34 Log message: Fix build problem with old linux/input.h (Andreas Stenglein) Modified files: xc/programs/Xserver/hw/xfree86/input/aiptek/: xf86Aiptek.h Revision ChangesPath 1.3 +4 -1 xc/programs/Xserver/hw/xfree86/input/aiptek/xf86Aiptek.h ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
Cannot connect to X Server
Title: Cannot connect to X Server Hi I was installing Qt/Embedded using rpm and after that i cannot connect to my X Server. I have inittab text login and startx command returns Connect connect to X Server I appreciate your assistance... Vinod
External FreeType build problem
I have trouble with a fix that appeared somewhere between 4.3.99.15 and 4.3.99.16 (and is still present in 4.3.99.901). I've browsed the changelogs and there was something that was supposed to help XFree86 build with external freetype libraries, but... well, on my config it did exactly the opposite, I think. Making World with #define HasFreetype2 YES #define BuildFreetype2Library NO in my xc/config/cf/host.def fails in xc/lib/font/FreeType/ on ftfuncs.c. Seems as those freetype include definitions used in there newer got declared and gcc complains #include expects FILENAME or FILENAME. In previous releases, up to (and including) 4.3.99.14 using #define HasFreetype2 YES #define BuildFreetype2Library NO allowed me to compile XFree86 using a system-wide installed freetype2-2.1.5. But it's no longer possible. So... am I missing something, or is it a bug? -- \hoppke http://lubuska.zapto.org/~hoppke/ ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: External FreeType build problem
On Mon, Dec 08, 2003 at 11:44:40PM +0100, Grzegorz Nieweglowski wrote: I have trouble with a fix that appeared somewhere between 4.3.99.15 and 4.3.99.16 (and is still present in 4.3.99.901). I've browsed the changelogs and there was something that was supposed to help XFree86 build with external freetype libraries, but... well, on my config it did exactly the opposite, I think. Making World with #define HasFreetype2 YES #define BuildFreetype2Library NO in my xc/config/cf/host.def fails in xc/lib/font/FreeType/ on ftfuncs.c. Seems as those freetype include definitions used in there newer got declared and gcc complains #include expects FILENAME or FILENAME. I had the same problem and reverted one line of the change by using the following patch. --- lib/font/FreeType/ftfuncs.c.old 2003-11-23 23:59:12.518624452 + +++ lib/font/FreeType/ftfuncs.c 2003-11-24 00:01:16.660583100 + @@ -51,7 +51,7 @@ #include FT_XFREE86_H #include FT_BBOX_H #include FT_INTERNAL_TRUETYPE_TYPES_H -#include ttobjs.h +#include extras/freetype2/src/truetype/ttobjs.h /* * If you want to use FT_Outline_Get_CBox instead of * FT_Outline_Get_BBox, define here. I'm not sure if this a XFree86 bug or if just the include file is missing in the freetype2-devel package. Stefan Public Key available Stefan Dirsch (Res. Dev.) SuSE Linux AG Tel: 0911-740530 Deutschherrnstr. 15-19 FAX: +49 911 741 77 55D-90429 Nürnberg http://www.suse.deGermany ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
s3 trio64, color depth problem (see also bug #465)
hi, as explained in bug #465, support for the s3 trio64 v2/dx/gx was ported from 3.3.6. now, i've installed the snapshot 4.3.99.901 to try it (on a p200 mmx, 64 mb of ram, slackware 8.1, kernel 2.4.23) small disclaimer: i am by no means a developer, i just wanted to try this new s3 driver so i can finally use XFree86 v4.x instead of 3.3.6 on this computer, and i hope my feedback is of any use to you. i can use color depth of 8 bits without problems, but when i try 16 bits, i just get a blank screen (doesn't exit with failure). it claims i have insufficient memory for the 1280x1024 or 1024x768 modes. it detects i have 2048kb of video ram, which is indeed not enough (1280x1024x16=2560kb necessary) but it should be sufficient to give 1024x768 at least. this all used to work under 3.3.6 (even 1280x1024!) sometimes i also get a screen with a vertical stripe of any color while switching between modes using ctrl-alt-+/- (tried that twice, it locks my system completely). log follows below (while trying 1024x768x16). one other remark: in the card list of the xf86config script, the video chip name s3 trio64 v2/dx/gx and numbers s3 86C775/86C785 are not linked to the s3 driver, even though they are supported in this new version. regards, steven. - _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/batcher:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.901 (4.4.0 RC 1) Release Date: 2 December 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux batcher 2.4.23 #1 Sat Nov 29 12:44:37 CET 2003 i586 Build Date: 05 December 2003 Changelog Date: 03 December 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Dec 9 09:52:26 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor dell (**) | |--Device s3 trio64 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 500 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc101 (**) XKB: model: pc101 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option DontZap off (**) Option DontZoom off (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7100 card , rev 01 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 01 class 06,80,00 hdr 00 (II) PCI: 00:10:0: chip 5333,8901 card 1028,4076 rev 16 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range:
Re: s3 trio64, color depth problem (see also bug #465)
maybe try depth 15 rather than 16... as I recall some old cards could only do one or the other. I'm no expert though. Alex --- steven mestdagh [EMAIL PROTECTED] wrote: hi, as explained in bug #465, support for the s3 trio64 v2/dx/gx was ported from 3.3.6. now, i've installed the snapshot 4.3.99.901 to try it (on a p200 mmx, 64 mb of ram, slackware 8.1, kernel 2.4.23) small disclaimer: i am by no means a developer, i just wanted to try this new s3 driver so i can finally use XFree86 v4.x instead of 3.3.6 on this computer, and i hope my feedback is of any use to you. i can use color depth of 8 bits without problems, but when i try 16 bits, i just get a blank screen (doesn't exit with failure). it claims i have insufficient memory for the 1280x1024 or 1024x768 modes. it detects i have 2048kb of video ram, which is indeed not enough (1280x1024x16=2560kb necessary) but it should be sufficient to give 1024x768 at least. this all used to work under 3.3.6 (even 1280x1024!) sometimes i also get a screen with a vertical stripe of any color while switching between modes using ctrl-alt-+/- (tried that twice, it locks my system completely). log follows below (while trying 1024x768x16). one other remark: in the card list of the xf86config script, the video chip name s3 trio64 v2/dx/gx and numbers s3 86C775/86C785 are not linked to the s3 driver, even though they are supported in this new version. regards, steven. - _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/batcher:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.901 (4.4.0 RC 1) Release Date: 2 December 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux batcher 2.4.23 #1 Sat Nov 29 12:44:37 CET 2003 i586 Build Date: 05 December 2003 Changelog Date: 03 December 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Dec 9 09:52:26 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor dell (**) | |--Device s3 trio64 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 500 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc101 (**) XKB: model: pc101 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option DontZap off (**) Option DontZoom off (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7100 card , rev 01 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 01 class 06,80,00 hdr 00 (II) PCI: 00:10:0: chip 5333,8901 card 1028,4076 rev 16 class 03,00,00
Re: place internet call from your telephone line
How to place internet calls from your telephone line with low rate of $0.039/minute!? That's very easy! You can see details here: http://www.wotec88.com attachment: Yapjack_connect.JPG
Re: patch for a crash in x86 emulator
Alan Hourihane [EMAIL PROTECTED] wrote: Just do a diff and submit it to bugzilla. Then you don't have to rely on Egbert being around and anyone of the XFree86 committers can take a look at it. Ok, I will give that a shot. Can someone shoot me a copy of the latest sourece from CVS for just the x86 emulator? It will take a while for me to sync up to the entire tree. Regards, --- Kendall Bennett Chief Executive Officer SciTech Software, Inc. Phone: (530) 894 8400 http://www.scitechsoft.com ~ SciTech SNAP - The future of device driver technology! ~ ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: External FreeType build problem
Stefan Dirsch wrote: I had the same problem and reverted one line of the change by using the following patch. (...) Thanks, but it didn't work for me. However, I managed to solve it on my box by adding a #include freetype/config/ftheader.h to all troublemaking files. I looked at the 4.3.99.15-4.3.99.16.diff.bz2 patch. The idea behind that patch was correct, removing clutter and really trying to push freetype references out of the local tree, replacing '#include foo' with '#include FT_FOO'. But I did noticed something else: there really shouldn't be ANY need for me to add my own include: See, the patch always added a #include ft2build.h And my /usr/include/ft2build.h looks like this: #ifndef __FT2_BUILD_UNIX_H__ #define __FT2_BUILD_UNIX_H__ #include freetype/config/ftheader.h #endif /* __FT2_BUILD_UNIX_H__ */ So it should automatically include the file freetype/config/ftheader.h. Unless __FT2_BUILD_UNIX_H__ was already defined. *Or* the compiler directive '#include ft2build.h' wasn't picking up the /usr/include/ft2build.h file... So I checked the access time on /usr/include/ft2build.h... ...and I was right. Nothing had accessed it. My conclusion: I'm using gcc-3.2.3. And that is probably the key to the whole mess. Newer releases of gcc treat the '-I' command line options a bit differently now, the include directories are searched in a different order than they would have been searched with earlier versions of gcc. And this bad, bad thing that happens when you try to use an external freetype is that gcc (at least my gcc) picks some includes from /usr/include/freetype2, and some from xc/extras/freetype2. I found that I really don't even need any patches. All I have to do is remove all ft2build.h files from the xc tree and it will build nicely. So it is obviously something related to the order in which my gcc picks up header files. Because no-one else reported this, I guess it's a gcc-version-incompatibility thing. But that's the way it goes with newer tools, for example twm won't compile with my flex-2.5.31. Compilation fails with stdout: In function `yylex': stdout:837: error: `yy_prev_more_offset' undeclared (first use in this function) stdout:837: error: (Each undeclared identifier is reported only once stdout:837: error: for each function it appears in.) not that I care, I don't need twm, but I think that xfree86 developers really could update their devel tools, some of us users are maybe using more up-to-date tools and XFree86 just won't compile for us :/ -- \hoppke ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
RE: Cannot connect to X Server
That's odd... Try xinit and see if xterm can connect...if that doesn't work, try xdm, and if that doesn't work, just run the X server raw to verify that X works. If X refuses to start up raw (with no clients), then there is a more serious problem. Cannot connect usually means that the X server can't be accessed. See if X can at least run (you can probably terminate it with Ctrl-Alt-Backspace. I've used this dozens of times) If X can't be accessed, you might want to make sure your DISPLAY environment variable is set. If X dies, startx can't connect to it. From: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Cannot connect to X Server Date: Tue, 9 Dec 2003 17:46:25 +0900 Hi I was installing Qt/Embedded using rpm and after that i cannot connect to my X Server. I have inittab text login and startx command returns Connect connect to X Server I appreciate your assistance... Vinod _ Shop online for kids toys by age group, price range, and toy category at MSN Shopping. No waiting for a clerk to help you! http://shopping.msn.com ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
XServer kills console
Hi all, I'm launching an Xserver from the console, with the 'X' binary. After that i use another console to launch some applications: xterm, a window manager, xeyes... When the last application dies, the X server doesn't die because it hasn't been launched from xinit, but the console drops dead, and i only can access my server remotely. A process list from the remote login shows me that there is no X, but my console keyboard still is dead :(. By the way, i'm using XFree86 4.3.0. cheers, -- David Gómez The question of whether computers can think is just like the question of whether submarines can swim. -- Edsger W. Dijkstra ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
patch: xf86Aiptek.h build problem with old linux/input.h
on my system, based on suse 7.3, I recently got an error when building XFree86 HEAD. This patch (copied from xc/programs/Xserver/hw/xfree86/input/wacom/xf86Wacom.c) fixes the build problem. diff -u xc/programs/Xserver/hw/xfree86/input/aiptek/xf86Aiptek.h_orig xc/programs/Xserver/hw/xfree86/input/aiptek/xf86Aiptek.h --- xc/programs/Xserver/hw/xfree86/input/aiptek/xf86Aiptek.h_orig Tue Dec 9 22:53:35 2003 +++ xc/programs/Xserver/hw/xfree86/input/aiptek/xf86Aiptek.hTue Dec 9 22:55:04 2003 @@ -43,6 +43,9 @@ #ifdef LINUX_INPUT # include asm/types.h # include linux/input.h +#ifndef EV_MSC +#define EV_MSC 0x04 +#endif /* keithp - a hack to avoid redefinitions of these in xf86str.h */ # ifdef BUS_PCI # undef BUS_PCI best regards, Andreas please cc me since I'm not on the list. Thanks. ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: External FreeType build problem
On Tue, Dec 09, 2003 at 11:02:32AM +0100, Stefan Dirsch wrote: On Mon, Dec 08, 2003 at 11:44:40PM +0100, Grzegorz Nieweglowski wrote: I have trouble with a fix that appeared somewhere between 4.3.99.15 and 4.3.99.16 (and is still present in 4.3.99.901). I've browsed the changelogs and there was something that was supposed to help XFree86 build with external freetype libraries, but... well, on my config it did exactly the opposite, I think. Making World with #define HasFreetype2 YES #define BuildFreetype2Library NO in my xc/config/cf/host.def fails in xc/lib/font/FreeType/ on ftfuncs.c. Seems as those freetype include definitions used in there newer got declared and gcc complains #include expects FILENAME or FILENAME. I had the same problem and reverted one line of the change by using the following patch. --- lib/font/FreeType/ftfuncs.c.old 2003-11-23 23:59:12.518624452 + +++ lib/font/FreeType/ftfuncs.c 2003-11-24 00:01:16.660583100 + @@ -51,7 +51,7 @@ #include FT_XFREE86_H #include FT_BBOX_H #include FT_INTERNAL_TRUETYPE_TYPES_H -#include ttobjs.h +#include extras/freetype2/src/truetype/ttobjs.h /* * If you want to use FT_Outline_Get_CBox instead of * FT_Outline_Get_BBox, define here. lib/font/FreeType/Imakefile has -I$(FT2SOURCEDIR)/truetype in INCLUDES, and FT2SOURCEDIR = $(TOP)/extras/freetype2/src, so ttobjs.h should be found there. (It is for me.) David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: External FreeType build problem
On Tue, Dec 09, 2003 at 07:26:06PM +0100, Grzegorz Nieweglowski wrote: Stefan Dirsch wrote: I had the same problem and reverted one line of the change by using the following patch. (...) Thanks, but it didn't work for me. However, I managed to solve it on my box by adding a #include freetype/config/ftheader.h to all troublemaking files. I looked at the 4.3.99.15-4.3.99.16.diff.bz2 patch. The idea behind that patch was correct, removing clutter and really trying to push freetype references out of the local tree, replacing '#include foo' with '#include FT_FOO'. But I did noticed something else: there really shouldn't be ANY need for me to add my own include: See, the patch always added a The patch is necessary for building against freetype 2.1.7, because changes in header file names were hidden behind these macros. #include ft2build.h And my /usr/include/ft2build.h looks like this: #ifndef __FT2_BUILD_UNIX_H__ #define __FT2_BUILD_UNIX_H__ #include freetype/config/ftheader.h #endif /* __FT2_BUILD_UNIX_H__ */ So it should automatically include the file freetype/config/ftheader.h. Unless __FT2_BUILD_UNIX_H__ was already defined. *Or* the compiler directive '#include ft2build.h' wasn't picking up the /usr/include/ft2build.h file... So I checked the access time on /usr/include/ft2build.h... ...and I was right. Nothing had accessed it. My conclusion: I'm using gcc-3.2.3. And that is probably the key to the whole mess. Newer releases of gcc treat the '-I' command line options a bit differently now, the include directories are searched in a different order than they would have been searched with earlier versions of gcc. And this bad, bad thing that happens when you try to use an external freetype is that gcc (at least my gcc) picks some includes from /usr/include/freetype2, and some from xc/extras/freetype2. My first question is, do you have a clean 4.3.99.901 tree? If you extracted the source tarball on top of an older one, some files that have since been deleted will still be there and might be affecting your build. The next question is, is '-I/usr/include -I/usr/include/freetype2' on the gcc command lines as it should be? Can you send the actual build log extract for the failing part? Also, check the depend stuff in the Makefile that gets created to see which ft2build.h file it thinks is getting used. I found that I really don't even need any patches. All I have to do is remove all ft2build.h files from the xc tree and it will build nicely. So it is obviously something related to the order in which my gcc picks up header files. Because no-one else reported this, I guess it's a gcc-version-incompatibility thing. But that's the way it goes with newer tools, for example twm won't compile with my flex-2.5.31. Compilation fails with stdout: In function `yylex': stdout:837: error: `yy_prev_more_offset' undeclared (first use in this function) stdout:837: error: (Each undeclared identifier is reported only once stdout:837: error: for each function it appears in.) not that I care, I don't need twm, but I think that xfree86 developers really could update their devel tools, some of us users are maybe using more up-to-date tools and XFree86 just won't compile for us :/ If you can figure out what the problem is and send a patch for it, that would be most welcome. It has to work with older versions of flex, as well as lex too. David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: patch: xf86Aiptek.h build problem with old linux/input.h
On Tue, Dec 09, 2003 at 11:26:08PM +0100, Andreas Stenglein wrote: on my system, based on suse 7.3, I recently got an error when building XFree86 HEAD. This patch (copied from xc/programs/Xserver/hw/xfree86/input/wacom/xf86Wacom.c) fixes the build problem. Thanks, I'll commit it. David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: XFree86 4.4.0 RC1
I have experienced a number of build problems on Solaris 2.5.1 x86. Most of these I believe would be problems on any system that does not provide an implementation of snprintf. Below are patches that enable 4.4.0 RC1 to build on our system. Many of them are reversals of changes that were made since 4.3.0. I don't know what the reasons for these changes were, so the author(s) of these changes may want to review the patches to see if they are appropriate or if some other changes are needed to fix this. The jmp changes are ones that I also had to make for 4.3.0. I think the replacement code I just got from the 4.2.0 or 4.2.1 versions, so quite possibly will have some effect on other systems. In case it makes a difference, the changes between my host.def and the supplied xfree86.def are also included here. Note also that I have disabled BuildGlxExt since I could not build with this for 4.3.0. I know of one other person who had the same problem with Solaris 8. I will retest with #define BuildGlxExt NO commented out in the next day and post the results to the list. I am happy to test building on Solaris 2.5.1 x86 for any changes that are required. I have not tried running XFree86 yet, but suspect that I may have to make similar changes to those I had to make to 4.3.0 to get it to run. I will also provide these details in a separate post if I have any troubles. Regards, Lindsay Haigh *** programs/Xserver/hw/xfree86/os-support/shared/libc_wrapper.c.orig Fri Nov 21 15:59:54 2003 --- programs/Xserver/hw/xfree86/os-support/shared/libc_wrapper.cTue Dec 9 15:32:46 2003 *** *** 1878,1883 --- 1878,1887 + #ifdef NEED_SNPRINTF + #include snprintf.c + #endif + #ifdef HAVE_SYSV_IPC int *** programs/Xserver/hw/xfree86/os-support/Imakefile.orig Wed Dec 3 15:00:33 2003 --- programs/Xserver/hw/xfree86/os-support/ImakefileWed Dec 10 09:25:24 2003 *** *** 110,115 --- 110,119 NormalDepLibraryTarget(xf86_os,$(SUBDIRS) $(DONES),$(OBJS)) + #if !HasSnprintf + LinkSourceFile(snprintf.c,$(LIBSRC)/misc) + #endif + ForceSubdirs($(SUBDIRS)) DependSubdirs($(SUBDIRS)) *** programs/Xserver/hw/xfree86/xf86cfg/loader.c.orig Fri Jun 7 07:03:32 2002 --- programs/Xserver/hw/xfree86/xf86cfg/loader.cTue Dec 9 15:04:58 2003 *** *** 55,61 static Bool EnumDatabase(XrmDatabase*, XrmBindingList, XrmQuarkList, XrmRepresentation*, XrmValue*, XPointer); ! static sigjmp_buf jmp; int signal_caught; int error_level; char *loaderPath, **loaderList, **ploaderList; --- 55,61 static Bool EnumDatabase(XrmDatabase*, XrmBindingList, XrmQuarkList, XrmRepresentation*, XrmValue*, XPointer); ! static int jmp[_SIGJBLEN]; int signal_caught; int error_level; char *loaderPath, **loaderList, **ploaderList; *** programs/mkfontscale/mkfontscale.c.orig Wed Dec 3 15:01:31 2003 --- programs/mkfontscale/mkfontscale.c Tue Dec 9 11:47:00 2003 *** *** 45,50 --- 45,56 #include data.h #include ident.h + #ifdef NEED_SNPRINTF + #undef SCOPE + #define SCOPE static + #include snprintf.c + #endif + #define NPREFIX 1024 #ifndef MAXFONTFILENAMELEN *** programs/xdm/Imakefile.orig Fri Nov 21 16:01:06 2003 --- programs/xdm/Imakefile Tue Dec 9 12:37:45 2003 *** *** 167,172 --- 167,175 #if HasSnprintf SNPRINTF_DEFINES = -DHAS_SNPRINTF + #else + SNPRINTFSRCS = snprintf.c + SNPRINTFOBJS = snprintf.o #endif #if HasGetIfAddrs *** *** 202,215 netaddr.c reset.c resource.c protodpy.c policy.c \ session.c socket.c streams.c util.c xdmcp.c \ mitauth.c \ ! genauth.c access.c choose.c $(PRNGCSRCS) \ ! $(XDMAUTHSRCS) $(RPCSRCS) $(KRB5SRCS) $(GREETSRCS) OBJS1 = auth.o daemon.o server.o dpylist.o dm.o error.o file.o \ netaddr.o reset.o resource.o protodpy.o policy.o \ session.o socket.o streams.o util.o xdmcp.o \ mitauth.o \ genauth.o access.o choose.o $(PRNGCOBJS) \ ! $(XDMAUTHOBJS) $(RPCOBJS) $(KRB5OBJS) $(GREETOBJS) SRCS2 = xdmshell.c OBJS2 = xdmshell.o #if BuildChooser --- 205,220 netaddr.c reset.c resource.c protodpy.c policy.c \ session.c socket.c streams.c util.c xdmcp.c \ mitauth.c \ ! genauth.c access.c choose.c \ ! $(XDMAUTHSRCS) $(RPCSRCS) $(KRB5SRCS) $(GREETSRCS) \ ! $(SNPRINTFSRCS) OBJS1 = auth.o daemon.o server.o dpylist.o dm.o error.o file.o \ netaddr.o reset.o resource.o protodpy.o policy.o \ session.o socket.o streams.o util.o xdmcp.o \ mitauth.o \ genauth.o access.o choose.o $(PRNGCOBJS) \ !
Re: XFree86 4.4.0 RC1
On Wed, Dec 10, 2003 at 11:53:02AM +1000, [EMAIL PROTECTED] wrote: I have experienced a number of build problems on Solaris 2.5.1 x86. Most of these I believe would be problems on any system that does not provide an implementation of snprintf. Below are patches that enable 4.4.0 RC1 to build on our system. Many of them are reversals of changes that were made since 4.3.0. I don't know what the reasons for these changes were, so the author(s) of these changes may want to review the patches to see if they are appropriate or if some other changes are needed to fix this. The jmp changes are ones that I also had to make for 4.3.0. I think the replacement code I just got from the 4.2.0 or 4.2.1 versions, so quite possibly will have some effect on other systems. The jmp changes need to be conditional. The version you have will break most other systems. Is sigjmp_buf in none of the system headers? In case it makes a difference, the changes between my host.def and the supplied xfree86.def are also included here. Note also that I have disabled BuildGlxExt since I could not build with this for 4.3.0. I know of one other person who had the same problem with Solaris 8. I will retest with #define BuildGlxExt NO commented out in the next day and post the results to the list. I've done test builds on 2.6 - 8, and didn't need to disable anything. *** programs/Xserver/hw/xfree86/os-support/shared/libc_wrapper.c.orig Fri Nov 21 15:59:54 2003 --- programs/Xserver/hw/xfree86/os-support/shared/libc_wrapper.cTue Dec 9 15:32:46 2003 *** *** 1878,1883 --- 1878,1887 + #ifdef NEED_SNPRINTF + #include snprintf.c + #endif + #ifdef HAVE_SYSV_IPC int snprintf.c should get built in Xserver/os for platforms that need it. Is that not working for some reason? *** programs/mkfontscale/mkfontscale.c.orig Wed Dec 3 15:01:31 2003 --- programs/mkfontscale/mkfontscale.c Tue Dec 9 11:47:00 2003 *** *** 45,50 --- 45,56 #include data.h #include ident.h + #ifdef NEED_SNPRINTF + #undef SCOPE + #define SCOPE static + #include snprintf.c + #endif + #define NPREFIX 1024 #ifndef MAXFONTFILENAMELEN That looks OK. --- programs/xdm/Imakefile Tue Dec 9 12:37:45 2003 *** *** 167,172 --- 167,175 #if HasSnprintf SNPRINTF_DEFINES = -DHAS_SNPRINTF + #else + SNPRINTFSRCS = snprintf.c + SNPRINTFOBJS = snprintf.o #endif Xdm is supposed to be using XmuSnprintf via this in dm.h: #ifndef HAS_SNPRINTF #include X11/Xmu/SysUtil.h #define snprintf XmuSnprintf #endif Can you tell us where this isn't working (maybe dm.h isn't included somewhere that needs this)? *** programs/fonttosfnt/util.c.orig Fri Nov 21 16:00:45 2003 --- programs/fonttosfnt/util.c Tue Dec 9 11:49:24 2003 *** *** 38,43 --- 38,50 #include FT_BDF_H #include fonttosfnt.h + #ifdef NEED_SNPRINTF + #undef SCOPE + #define SCOPE static + #include snprintf.c + #endif + + That looks OK. David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: XFree86 4.4.0 RC1
Further to my previous email, the results of a build with Glx give the following errors: rm -f mmx_blend.i /usr/ccs/lib/cpp -Dsun -Di386 -DSVR4 -D__EXTENSIONS__ -D__i386 -DMALLOC_0_RETURNS_NULL -DGLXEXT -DGLX_USE_MESA -DUSE_X86_ASM -DUSE_MMX_ASM -I../../../../../exports/include -I../../../../../include/extensions -I../../../../../extras/Mesa/src -I../../../../../extras/Mesa/src/X86-I../../../include mmx_blend.S | \ grep -v '^\#' mmx_blend.i rm -f mmx_blend.o gcc -c -x assembler -o mmx_blend.o mmx_blend.i Assembler: aline 1403 : Illegal mnemonic aline 1403 : syntax error aline 1403 : Illegal register aline 1403 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal register aline 1414 : Illegal mnemonic aline 1414 : syntax error aline 1414 : Illegal register aline 1414 : Illegal register aline 1414 : Illegal mnemonic Too many errors - Goodbye *** Error code 1 make: Fatal error: Command failed for target `mmx_blend.o' Current working directory /proj3/ere/work/lindsayh/XFree86/xc/lib/GL/mesa/src/X86 The offending lines in mmx_blend.i are: 1403: pxor %mm0, %mm0 1414: movd ( %edi),%mm1 ;movd ( %esi ),%mm2; ; ; ; ; ; ; punpcklbw %mm0 ,%mm2 ; ; punpcklbw %mm0 ,%mm1 ; ; movq %mm1,%mm3 ; ; ; punpckhwd %mm3,%mm3 ; ; punpckhdq %mm3,%mm3 ; ; psubw %mm2,%mm1 ; psllw $8,%mm2 ; pmullw %mm1,%mm3 ; ; ; ; ; ; movq %mm3,%mm1 ; psrlw $8,%mm3 ; ; ; ; ; paddw %mm3,%mm1 ; psrlw $7,%mm3 ; ; ; ; ; paddw %mm1,%mm3 ; ; ; paddw %mm2,%mm3 ; ; ; psrlw $8,%mm3 ; ; packuswb %mm6 ,%mm3 ; ; movd %mm3 , ( %edi) ; The entire file is attached. Maybe it is something to do with the use of /usr/ccs/lib/cpp?? David, what did your test builds on 2.6 - 8 use to generate mmx_blend.i? Regards, Lindsay Haigh (See attached file: mmx_blend.i) mmx_blend.i Description: Binary data
Re: Cannot connect to X Server
Dear Raymond Thanks for your guidancexterm failed but xdm works .. startx on text login cannot yet start X Server due to not being able to close previously started X Server. Vinod Raymond Jennings wrote: That's odd... Try xinit and see if xterm can connect...if that doesn't work, try xdm, and if that doesn't work, just run the X server raw to verify that X works. If X refuses to start up raw (with no clients), then there is a more serious problem. Cannot connect usually means that the X server can't be accessed. See if X can at least run (you can probably terminate it with Ctrl-Alt-Backspace. I've used this dozens of times) If X can't be accessed, you might want to make sure your DISPLAY environment variable is set. If X dies, startx can't connect to it. From: [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Cannot connect to X Server Date: Tue, 9 Dec 2003 17:46:25 +0900 Hi I was installing Qt/Embedded using rpm and after that i cannot connect to my X Server. I have inittab text login and startx command returns Connect connect to X Server I appreciate your assistance... Vinod _ Shop online for kids? toys by age group, price range, and toy category at MSN Shopping. No waiting for a clerk to help you! http://shopping.msn.com ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: [I18n] Changes for xkb/symbos/pc/br
On Tue, 9 Dec 2003 19:52:59 +0600 (TSK) Ivan Pascal [EMAIL PROTECTED] wrote: Hi, I' d like to request some changes in the file xkb/symbols/pc/br in 4.3.99.901: key AC12 { [bracketright,braceright, masculine ] }; key AB07 { [ m, M, mu ] }; Could you help me? Commited. Thanks. Ivan, thanks. One question: the use of pc/[language code] will be the standard in XFree86 4.4? -- Ricardo Yassuo Igarashi E-mail: [EMAIL PROTECTED] Linux HP: http://web.that.com.br/iga ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
Re: [XFree86] LCD on Radeon 7500
Thanks for the reply. My monitor section already specifies the scan rate ranges. I'm running XFree86 release included in Mandrake 9.2 (4.3.0 9 May 2003). I can't find anything about monitorlayout in the man pages. Here is the monitor section from the XF86Config-4: Section Monitor Identifier monitor1 VendorName Generic ModelName Flat Panel 1280x1024 HorizSync 31.5-70 VertRefresh 56-75 Option IgnoreEDID # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine 768x576 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine 768x576 63.07 768 800 960 1024 576 578 590 616 EndSection I have also tried adding a ModeLine for 1280x1024 generated by gtf. Thanks, Phil Alex Deucher wrote: You need to enter the hsync and vrefresh ranges for your monitor in the monitor section of your config file. Also if you are running xfree86 from cvs you can try the monitorlayout option. see the radeon and XF86Config man pages for more info. Alex ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] My X Window system does not start , just Leaving this message Given bellow !! Help ME !!
Bharathi S wrote: On Mon, 8 Dec 2003, Gitartha Saikia wrote: XFree86 Version 4.0.3 / X Window System (--) PCI:*(0:9:0) SiS unknown chipset (0x0204) Some SiS Card does not have support in X and X version is also very old. So try to upgrade to new and test :) This card is not supported in XFree86 4.x. I think 3.3.6 does support it. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net *** http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] 865G and DVI interface problems
Hello. I can`t use SyncMaster 192?/193? with screen reslution [EMAIL PROTECTED] on work station DELL SX270(chipset 865G) when i connect it with DVI interface. I can see only black screen. Whith Windows XP (on DVI), or with VGA interface on RED HAT 9 Linux i can use this screen reslution whithout any problems. Whot can i do for use SyncMaster 192?/193? with screen reslution [EMAIL PROTECTED] on RED HAT 9 Linux? I need use only screen reslution [EMAIL PROTECTED] or better. Version X-server 4.3.0 My configuration of XF86Config-4: ---begin XF86Config-4--- Section ServerLayout Identifier XFree86 Configured Screen 0 Screen 0 0 InputDeviceDevInputMice CorePointer InputDeviceKeyboard CoreKeyboard EndSection Section Module Load GLcore Load dbe # Load dri Load extmod Load fbdevhw Load glx # Load pex5 Load record # Load xie Load v4l Load type1 EndSection Section InputDevice Identifier Keyboard Driver keyboard Option Protocol Standard Option XkbModel pc104 Option XkbRules xfree86 Option XkbLayout us,ru(winkeys) Option XkbOptionsgrp:ctrl_shift_toggle,grp_led:scroll EndSection Section InputDevice # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier DevInputMice Driver mouse Option Protocol IMPS/2 Option Device /dev/input/mouse0 Option ZAxisMapping 4 5 Option Emulate3Buttons no EndSection Section Files RgbPath /usr/X11R6/lib/X11/rgb FontPathunix/:7100 EndSection Section ServerFlags AllowMouseOpenFail EndSection Section Monitor Identifier Monitor VendorName SAMSUNG ModelNameSyncMaster 193? HorizSync30-80 # `- i try a lot of different values this parametrs VertRefresh 56-70 # `- i try a lot of different values this parametrs EndSection Section Device # BusID PCI:0:2:0 Driver i810 # VideoRam16384 VideoRam65536 Identifier Intel Corp.|82865G/GL Chipset Integrated Graphics Device # BoardName Intel 865 EndSection Section Screen Identifier Screen Device Intel Corp.|82865G/GL Chipset Integrated Graphics Device Monitor Monitor DefaultColorDepth 24 Subsection Display Depth 8 Modes 1280x1024 1024x768 800x600 640x400 EndSubsection Subsection Display Depth 16 Modes 1280x1024 1024x768 800x600 640x480 EndSubsection Subsection Display Depth 24 Modes 1280x1024 1024x768 800x600 640x480 EndSubsection EndSection Section DRI Mode 0666 EndSection ---End XF86Config-4--- ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] PAM authentication failed
While starting to startx, i went through an error and X windows have not configured. The error is as follows, PAM authentication failed and perhaps cosole ownership problems. Please give some suggestions yours faithfully D.Balasundaresan = D. BALASUNDARESAN., RESEARCH SCHOLAR DEPARTMENT OF CRYSTALLOGRAPHY AND BIOPHYSICS UNIVERSITY OF MADRAS GUINDY CAMPUS CHENNAI - 600 025 INDIA.; __ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Strange Radeon 9200 SE problem
Hello My platform is an AMD Duron 750 with 384 MB RAM. I'm using the development snapshot 4.3.99.901, with a 2.6.0-test11 kernel I have a strange performance behavior since I changed my ATI Radeon 7500 (64 MB DDR) with an ATI Radeon 9200 SE (64 MB DDR). XFree config : see below Radeon 7500Radeon 9200 SE glxgears1070 fps 570 fps Quake 3 Arena 1.32b* about 50 fps about 30 fps Serious Sam (config 1)** (1) about 25 fps Serious Sam (config 2)*** (2) about 17 fps KDE OpenGL Screensaversruns smoothly doesn't run smoothly * High Quality settings, 800x600, Demo four ** Medium Quality settings, 800x600, Demo suburbs (I use the Icculus port) *** Medium Quality settings, 1024x768, Demo suburbs (1) I've didn't benchmark, but framerate was worse than Radeon 7500 (2) I've didn't benchmark, but framerate was better than Radeon 7500 So I wonder if there's not a problem with the DRI implementation for Radeon 9200 SE XF86Config : Subsection Display Depth 24 Modes 1152x864 ViewPort0 0 Virtual 0 0 EndSubsection [ ... ] Option AGPMode 2 Option AGPFastWrite False Option EnablePageFlip True [ ... ] AGPMode is 2X in the BIOS, and AGP Fast Write is disabled in the BIOS (ASUS A7Pro motherboard with a VIA KT133 chipset) The Radeon 9200 SE chip id is 0x5964 Best regards -- Arnaud Boudou ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Error
Server won't load anymore. XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Dec 9 09:25:52 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 2 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0305 card 103c,0022 rev 80 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8305 card 103c,0022 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0a:0: chip 1217,6972 card 0001, rev 00 class 06,07,00 hdr 02 (II) PCI: 00:11:0: chip 1106,8231 card 103c,0022 rev 10 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 103c,0022 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 103c,0022 rev 1e class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,8235 card 103c,0022 rev 10 class 06,80,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3058 card 103c,0022 rev 40 class 04,01,00 hdr 00 (II) PCI: 00:11:6: chip 1106,3068 card 103c,0022 rev 20 class 07,80,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 103c,0022 rev 51 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d02 card 103c,0022 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xdfff (0x2000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe000 - 0xefff (0x1000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x9000 - 0x9fff (0x1000) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x00c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x - 0x10ff (0x1100) IX[B] [1] -1 0 0x - 0x0003 (0x4) IX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) rev 1, Mem @ 0xe000/19, 0x9000/27, BIOS @ 0x000c/16 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0
[XFree86] startx error
Hie I am a newbie to linux redhat. Going through the learning process. At the prompt i typed the command startx and i got the error: Fatal server error: Server is already active for display 0 If this server is already running, remove /tmp/.XO-lock and start again. What could this mean Chiko ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] X errors w/ new gateway BIOS
It doesnt look like gateway will do anything to help usso would some kind developer consider Looking into a possible solution/patch? The laptop uses the intel i830 chip and before the bios upgrade, XF86 v4.3 worked fine. Now with the new v36.01.00 bios, X cannot reclaim the stolen memory, I think the address have moved. I can provide kernel messages from before and after the upgrade, but I only have current, i.e. post upgrade, X logfiles BTW, this has happened to several gateway solo 1450 users, so we know it is related to bios upgrade. Thank You, Donald G. Knecht
Re: [XFree86] Error
Could not init font path element unix/:7100, removing from list! Fatal server error: could not open default font 'fixed' Something has happened to your font server (xfs). Try restarting it. -- Ryan Underwood, [EMAIL PROTECTED] signature.asc Description: Digital signature
[XFree86] GNOME will not start?
Sir/Madam, I am a newbie (and not a programmer)running Linux 9on a new Dell Pentium computer. It has worked fine for several weeks. Yesterday I went to the RHN site and downloaded approx. 34 errata updates and 14 package updates. I am not a paying customer so the package updates downloads were designated 'pending' (waiting for available time to download, I guess). I don't know if they were downloaded by the time I shut down the pc at the end of the day. This morning the desktop program would not start and I had to reboot several times just to get to the shell. I have attached the xfree86 log file as instructed in the original error message, which I hope will be of help to solve my problem. Also, when I reboot now, the last lines to displayare the following: Red Hat Linux release 9 (Shrike) Kernel 2.4.20-20.9 on an i686 400SC login: /etc/X11/prefdm: line 1: GNOME: command not found I did have control of the shell at this point andwas ablelog on. I used smbclient to copy the XFree86 log file to another Windows pc on the network. If I cannot go forward in solving this problemfrom here, is there a way to restore the system to where it was before I downloaded from RHN? Thank you for any help or suggestions you may have. Best regards, Richard Bohne HCE, Inc., No. Chelmsford, MA XFree860.log Description: Binary data
Re: [XFree86] startx error
It's a file created when x windows is started. It gives that error message if you type startx in a terminal while xwindows is running. The file can also be left in the /tmp directory if xwindows crashes. If xwindows is not really running and that error is displayed just delete the file. rm -f /tmp/.X0-lock You may have to be root to delete it. Then try the startx again. ktang - Original Message - From: Chikonga Maimbo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 09, 2003 8:51 AM Subject: [XFree86] startx error Hie I am a newbie to linux redhat. Going through the learning process. At the prompt i typed the command startx and i got the error: Fatal server error: Server is already active for display 0 If this server is already running, remove /tmp/.XO-lock and start again. What could this mean Chiko ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] LCD on Radeon 7500
the monitorlayout option is only available in cvs. Alex --- Thanks for the reply. My monitor section already specifies the scan rate ranges. I'm running XFree86 release included in Mandrake 9.2 (4.3.0 9 May 2003). I can't find anything about monitorlayout in the man pages. Here is the monitor section from the XF86Config-4: Section Monitor Identifier monitor1 VendorName Generic ModelName Flat Panel 1280x1024 HorizSync 31.5-70 VertRefresh 56-75 Option IgnoreEDID # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine 768x576 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine 768x576 63.07 768 800 960 1024 576 578 590 616 EndSection I have also tried adding a ModeLine for 1280x1024 generated by gtf. Thanks, Phil __ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] X errors w/ new gateway BIOS
here is my log file, for anyone who can help, -don XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: SuSE Linux [ELF] SuSE Build Date: 28 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Dec 9 09:14:35 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Layout[all] (**) |--Screen Screen[0] (0) (**) | |--Monitor Monitor[0] (**) | |--Device Device[0] (**) |--Input Device Keyboard[0] (**) Option Protocol Standard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse[1] (**) |--Input Device Mouse[3] (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/PEX does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/latin2/misc does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/latin2/75dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/latin2/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/latin2/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/latin7/75dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/baekmuk does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/japanese does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/kwintv does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/ucs/misc does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/ucs/75dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/ucs/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/hellas/misc does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/hellas/75dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/hellas/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/hellas/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/misc/sgi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/xtest does not exist. Entry deleted from font path. (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled,/usr/X11R6/lib/X11/fonts/CID (==) RgbPath set to /usr/X11R6/lib/X11/rgb (**) Input device list set to /dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0,/dev/pointer1,/dev/pointer2,/dev/pointer3 (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail (**) Option Xinerama off (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method
[XFree86] Help
I don't know what's up please help me, i'm runnig debian sid with kernel 2.4.23, my video card is ATI Rage 128 pro ultra... 16M Thanks XFree86.0.log Description: Binary data
Re: [XFree86] startx error
Keith Tang wrote: It's a file created when x windows is started. It gives that error message if you type startx in a terminal while xwindows is running. The file can also be left in the /tmp directory if xwindows crashes. If xwindows is not really running and that error is displayed just delete the file. rm -f /tmp/.X0-lock You may have to be root to delete it. Then try the startx again. ktang - Original Message - From: Chikonga Maimbo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 09, 2003 8:51 AM Subject: [XFree86] startx error Hie I am a newbie to linux redhat. Going through the learning process. At the prompt i typed the command startx and i got the error: Fatal server error: Server is already active for display 0 If this server is already running, remove /tmp/.XO-lock and start again. What could this mean Chiko ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 try switching to vt7, (hold ctrl, and alt, and press F7 keys simultaneously) and check if xdm,gdm,or kdm is running. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] startx error
Also remember that if a graphical login manager (like xdm, kdm, gdm, wdm and the like) is being used, the xserver *is* running and you need to kill that display manager if you want to start X from the command line. Panther On Tuesday 09 December 2003 09:52 am, Keith Tang stepped up to the podium, took a deep breath and intoned: It's a file created when x windows is started. It gives that error message if you type startx in a terminal while xwindows is running. The file can also be left in the /tmp directory if xwindows crashes. If xwindows is not really running and that error is displayed just delete the file. rm -f /tmp/.X0-lock You may have to be root to delete it. Then try the startx again. ktang - Original Message - From: Chikonga Maimbo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 09, 2003 8:51 AM Subject: [XFree86] startx error Hie I am a newbie to linux redhat. Going through the learning process. At the prompt i typed the command startx and i got the error: Fatal server error: Server is already active for display 0 If this server is already running, remove /tmp/.XO-lock and start again. What could this mean Chiko ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] [Radeon 9000] Trouble with external monitor
Hello, I've been trying plenty of ways to deal with the following problem but I can't find a way to solve it, therefore you guys are my last hope :-) So here it is: I just bought a Dell Latitude D600 laptop with a 1024x768-capable screen, equipped with an ATI Radeon 9000 graphic card. I also own a Sony CPD-E430 19´´ CRT monitor. My OS is Mandrake Linux 9.2. At work, I prefer of course to use my 19´´ monitor so I plugged the laptop to it. And here comes my problem: there is an external output on my CRT monitor, but it remains at 1024x768 while I would like to get up to 1280x1024 (note however that the frequency is usually (depending on my tests) set up to 85 Hz whereas it is only 60 Hz-equivalent on LCD). So I would like to get a better display, available with this CRT, say 1280x1024 at 90 Hz, when I plug the laptop to the CRT. Of course, I read the Radeon man page and tried to use these cloning possibilities but I nevertheless can´t succeed in having my display work properly. The best I got was indeed 1280x1024 at 90 Hz when launching the gdm session manager, but then I got a strange thing under Gnome: the background was 1280x1024 but the available part was only 1024x768 starting from the upper left corner (smells like virtual screen I guess but I wasn´t able to fix this). My XF86Config-4 file follows, together with the log file for my current configuration (1024x768 on both displays, 85Hz on the CRT). Thanks in advance to anyone willing to help me, Cheers Ek4f *** XF86Config-4 # File generated by XFdrake. *** Modified by ek4f # ** # Refer to the XF86Config man page for details about the format of # this file. # ** Section Files # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath unix/:-1 EndSection Section ServerFlags AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable CrtlAltKP_+/KP_- (resolution switching) #DontZap # disable CrtlAltBS (server abort) EndSection Section Module Load dbe # Double-Buffering Extension Load v4l # Video for Linux Load extmod Load type1 Load freetype Load glx # 3D layer Load dri # direct rendering EndSection Section DRI Mode 0666 EndSection Section InputDevice Identifier Keyboard1 Driver Keyboard Option XkbModel pc105 Option XkbLayout us_intl Option XkbOptions EndSection Section InputDevice Identifier Mouse1 Driver mouse Option Protocol IMPS/2 Option Device /dev/usbmouse Option ZAxisMapping 4 5 EndSection Section InputDevice Identifier Mouse2 Driver mouse Option Protocol PS/2 Option Device /dev/psaux Option Emulate3Buttons Option Emulate3Timeout 50 EndSection Section Monitor Identifier monitor1 VendorName Dell ModelName Dell 1024x768 Laptop Display Panel HorizSync 31.5-48.5 VertRefresh 59.0-75.0 EndSection Section Monitor Identifier monitor2 VendorName Sony ModelName Sony CPD-E430 HorizSync 31.5-96.0 VertRefresh 48.0-170.0 EndSection Section Modes Identifier foo ModeLine 1280x1024 165.47 1280 1336 1616 1728 1024 1026 1038 1064 #90Hz EndSection Section Device Identifier device1 VendorName ATI BoardName ATI Radeon (fglrx) Driver radeon Option DPMS Option CloneDisplay 1 Option CloneMode foo Option CloneHSync 30-96 Option CloneVRefresh 48-170 Option PanelOff on EndSection Section Screen Identifier screen1 Device device1 Monitor monitor1 DefaultColorDepth 24 Subsection Display Depth 8 Virtual 1024 768 EndSubsection Subsection Display Depth 15 Virtual 1024 768 EndSubsection Subsection Display Depth 16 Virtual 1024 768 EndSubsection Subsection Display Depth 24 Virtual 1024 768 EndSubsection EndSection Section ServerLayout Identifier layout1 InputDevice Keyboard1 CoreKeyboard InputDevice Mouse1 CorePointer InputDevice Mouse2 SendCoreEvents Screen screen1 EndSection XFree86.0.log XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 10 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file:
[XFree86] problem linux
Dear sir,.After instalation of Linux ,It had worked for two times ,but later before loading of Linux a dilogue box came like this"I can'tstart Xserver".The Xserver output to diagonose the problem was like this XFree86 Version 4.3.0(red hat release :4.3..0-2)Release date :27 february 2003X protocol version 11,Revision 0,Release 6.6Building operating system :Linux 2.4.20-3bigmen 1686[ELF]Build date :27 february 2003Buildhost :porky.devil.rehat.com Module loader presentOs kernal:Linux version 2.4.2 0-0([EMAIL PROTECTED])(gcc version 3.2.2.2 20030222(Red hat linux 3.2.2-5)#1thu march 13 17.54.28 EsT 2003 ==log file:"/var?log?XFree86.o.log|Time Satr nov 15 09 :00:31:2003(==)using configfile :"/etc/x11?xf86config"(EE) Failed to load module "bitmap"(module does not exit,0)(EE)failed to load module "pcidata"( ," ") Fatal, server error:unable to load required base module.exting. I had also tried with Xconfiguration Tool.I had reinstaled Linux the problem occurerd again Sir I expect you to solve this problem clearly for me as early as possible. yours faithfullyBalu.B.Chand[EMAIL PROTECTED] Yahoo! India Mobile: Ringtones, Wallpapers, Picture Messages and more. Download now.
[XFree86] mouse question
I would like to configure my laptop to use multiple mouse input pointers so I can use either a mini-mouse or the track pad depending on what is plugged in. Is this possible? Is there an example config file somewhere I could look at? Thanks Steve S. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] help with Xinstall.sh
Hi, I'm running a redhat 7.3 and I want to upgrade to the latest Xfree ver (4.3.0), but when I type sh Xinstall.sh -check I receive this message: checking which OS you're running... uname reports 'Linux' version '2.4.18-3', architecture 'i686'. Object format is 'ELF'. Xinstall.sh: strings : command not found. No Linux/ix86 binaries for this libc version What can I do? Thank you in advance ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Trouble running XFree86 on FreeBSD 5.1
I've tried several things includeing a simple xf86cfg. My X is linked to XFree86. Everything I do just gives me the failure to open /dev/io for extended I/O I am running this on a Dell Optiplex GX110 with an Intell 83810E board and having a built in i810E graphics adapter. Any assistance you could provide would be helpful P.S. I downloaded a fresh version of XFree86 4.3.0 and built it hoping to get the binary for the i810 server, but it looks like that has all changed and separate drivers are loaded into XFree86 as dynamically loadable modules. Please help. Thanks, John Barnes XF86Config XFree86.0.log *** This message is intended only for the use of the intended recipient and may contain information that is PRIVILEGED and/or CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any use, dissemination, disclosure or copying of this communication is strictly prohibited. If you have received this communication in error, please destroy all copies of this message and its attachments and notify us immediately. *** XF86Config Description: Binary data XFree86.0.log Description: Binary data
[XFree86] FW: Trouble running XFree86 on FreeBSD 5.1
-Original Message- From: Barnes, John Sent: Tuesday, December 09, 2003 1:22 PM To: '[EMAIL PROTECTED]' Subject: Trouble running XFree86 on FreeBSD 5.1 I've tried several things includeing a simple xf86cfg. My X is linked to XFree86. Everything I do just gives me the failure to open /dev/io for extended I/O I am running this on a Dell Optiplex GX110 with an Intell 83810E board and having a built in i810E graphics adapter. Any assistance you could provide would be helpful P.S. I downloaded a fresh version of XFree86 4.3.0 and built it hoping to get the binary for the i810 server, but it looks like that has all changed and separate drivers are loaded into XFree86 as dynamically loadable modules. Please help. Thanks, John Barnes XF86Config XFree86.0.log *** This message is intended only for the use of the intended recipient and may contain information that is PRIVILEGED and/or CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any use, dissemination, disclosure or copying of this communication is strictly prohibited. If you have received this communication in error, please destroy all copies of this message and its attachments and notify us immediately. *** XF86Config Description: Binary data XFree86.0.log Description: Binary data
[XFree86] PAM authentication failed, cannot start X server.
Hi, i'm new to Xserver but i've check around and can't find what's wrong with my system. I'm trying to get x to work with the xwin32 client on my pc. X work well on the console. After setting my display, i type startx and i get: [EMAIL PROTECTED] oracle]$ startx Fatal server error: PAM authentication failed, cannot start X server. Perhaps you do not have console ownership? When reporting a problem related to a server crash, please send the full server output, not just the last messages. Please report problems to [EMAIL PROTECTED] Xlib: connection to :0.0 refused by server Xlib: Invalid MIT-MAGIC-COOKIE-1 key giving up. xinit: unable to connect to X server xinit: No such process (errno 3): Server error. Couldnt get a file descriptor referring to the console [EMAIL PROTECTED] oracle]$ echo $DISPLAY 192.168.205.52:0.0 Frank Delisle DBA/Data expert Globalmedic.com (514)738-6832 ext.257 Failure is not an option ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] LCD on Radeon 7500
So, is it possible to get a LCD connected via DVI to work correctly with the current release? Any suggestions on what to try? Thanks, Phil Alex Deucher wrote: the monitorlayout option is only available in cvs. Alex ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Does XFree86 work with Chips 65545?
Hi, I'm new to XFree86 and am trying to get it to work with a Chips Technology 65545. According to the documentation it should work, but when I do startx it just goes to a blank screen. I have to cycle power on my machine to get out of it. Is there anyone out there who's been able to get it to work with this video card that can confirm that it does in fact work? Any help is much appreciated (I'm getting frustrated). I've attached my log and config files. Thanks alot! Mark ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the Software), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** # ** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ** # Section Module # This loads the DBE extension module. Loaddbe # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod Optionomit xfree86-dga # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadspeedo #Loadfreetype #Loadxtt # This loads the GLX module #Load glx # This loads the DRI module #Load dri EndSection # ** # Files section. This allows default font and rgb paths to be set # ** Section Files # The location of the RGB database. Note, this is the name of the # file minus the extension (like .txt or .db). There is normally # no need to change the default. RgbPath /usr/X11R6/lib/X11/rgb # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath /usr/X11R6/lib/X11/fonts/local/ FontPath /usr/X11R6/lib/X11/fonts/misc/ FontPath /usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath /usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath /usr/X11R6/lib/X11/fonts/Speedo/ FontPath /usr/X11R6/lib/X11/fonts/Type1/ #FontPath /usr/X11R6/lib/X11/fonts/TrueType/ #FontPath /usr/X11R6/lib/X11/fonts/freefont/ FontPath /usr/X11R6/lib/X11/fonts/75dpi/ FontPath /usr/X11R6/lib/X11/fonts/100dpi/ # The module search path. The default path is shown here. #ModulePath /usr/X11R6/lib/modules EndSection # ** # Server flags section. # ** Section ServerFlags # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #Option NoTrapSignals # Uncomment this to disable the CrtlAltFn VT
[XFree86] RE: Trouble running XFree86 on FreeBSD 5.1
All, I found the answer in the group archives. I had BSD set for maximum security and that restricts access to /dev/io. Thanks! John Barnes -Original Message- From: Barnes, John Sent: Tuesday, December 09, 2003 1:22 PM To: '[EMAIL PROTECTED]' Subject: Trouble running XFree86 on FreeBSD 5.1 I've tried several things includeing a simple xf86cfg. My X is linked to XFree86. Everything I do just gives me the failure to open /dev/io for extended I/O I am running this on a Dell Optiplex GX110 with an Intell 83810E board and having a built in i810E graphics adapter. Any assistance you could provide would be helpful P.S. I downloaded a fresh version of XFree86 4.3.0 and built it hoping to get the binary for the i810 server, but it looks like that has all changed and separate drivers are loaded into XFree86 as dynamically loadable modules. Please help. Thanks, John Barnes File: XF86ConfigFile: XFree86.0.log *** This message is intended only for the use of the intended recipient and may contain information that is PRIVILEGED and/or CONFIDENTIAL. If you are not the intended recipient, you are hereby notified that any use, dissemination, disclosure or copying of this communication is strictly prohibited. If you have received this communication in error, please destroy all copies of this message and its attachments and notify us immediately. *** ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Does XFree86 work with Chips 65545?
I just tried a different video card with a Chips 65530 and it doesn't work either (same issues). Does anyone know if the Chips driver for XFree86 is broken?? Thanks, Mark --- On Tue 12/09, [EMAIL PROTECTED] wrote: From: [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Tue, 9 Dec 2003 14:34:35 -0500 (EST) Subject: [XFree86] Does XFree86 work with Chips 65545? Hi, I'm new to XFree86 and am trying to get it to work with a Chips Technology 65545. According to the documentation it should work, but when I do startx it just goes to a blank screen. I have to cycle power on my machine to get out of it. Is there anyone out there who's been able to get it to work with this video card that can confirm that it does in fact work?brbrAny help is much appreciated (I'm getting frustrated). I've attached my log and config files.brbrThanks alot!brbrMarkbrbrbrbrbr___brJoin Excite! - http://www.excite.combrThe most personalized portal on the Web!brAttachment: XF86Config (15.38KB)brAttachment: XFree86.0.log (29.09KB)br ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] startx problem (Mandrake 9.2 with NVidia)
Good evening, My system was running fine but after a problem I had to reboot it. But it restarted in console mode not in X. And when I type startx I got an error and X refuses to start. Informations are provided in the Xfree86.0.log which is included in this message. I will appreciate your help, Best regards J.C. Le Scao [EMAIL PROTECTED] XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 10 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Dec 9 23:49:16 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout fr (**) XKB: layout: fr (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8098, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0735 card , rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 13f6,0300 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 9004,8178 card , rev 00 class 01,00,00 hdr 00 (II) PCI: 00:0d:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00 (II) PCI: 00:13:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80 (II) PCI: 00:13:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80 (II) PCI: 00:13:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80 (II) PCI: 01:00:0: chip 10de,0111 card 147b,6107 rev b2 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xcde0 - 0xcfef (0x210) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xbdc0 - 0xcdcf (0x1010) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] rev 178, Mem @ 0xce00/24, 0xc000/27, BIOS @ 0xcfef/16 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009
Re: [XFree86] Problems using XFree86 and RedHat 7.3.2
From your logfile: (II) ATI(0): My Monitor: Using hsync value of 31.50 kHz [*] Unless you own one of these dreaded single-frequency monitors, you may specify a range of frequencies, e.g. 25-60. But first read the manual of your monitor, please! [*]: That's why you see that many hsync out of range messages, I think. HTH, wij ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86