CVS Update: xc (branch: xf-4_3-branch)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 04/02/08 09:02:34 Log message: 1012. Fix font alias overrun. Modified files: xc/lib/font/fontfile/:Tag: xf-4_3-branch dirfile.c xc/programs/Xserver/hw/xfree86/: Tag: xf-4_3-branch CHANGELOG Revision ChangesPath 3.15.2.1 +5 -1 xc/lib/font/fontfile/dirfile.c 3.2588.2.35 +3 -2 xc/programs/Xserver/hw/xfree86/CHANGELOG ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 04/02/08 09:57:11 Log message: Fix warnings and driver name. Modified files: xc/programs/Xserver/hw/xfree86/drivers/via/: via_dri.c via_driver.c via_driver.h Revision ChangesPath 1.9 +5 -6 xc/programs/Xserver/hw/xfree86/drivers/via/via_dri.c 1.28 +2 -2 xc/programs/Xserver/hw/xfree86/drivers/via/via_driver.c 1.13 +2 -2 xc/programs/Xserver/hw/xfree86/drivers/via/via_driver.h ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: xf-4_0_2-branch)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 04/02/08 14:32:44 Log message: 1308. Fix font alias overrun. Modified files: xc/lib/font/fontfile/:Tag: xf-4_0_2-branch dirfile.c xc/programs/Xserver/hw/xfree86/: Tag: xf-4_0_2-branch CHANGELOG Revision ChangesPath 3.10.2.1 +5 -1 xc/lib/font/fontfile/dirfile.c 3.1485.2.63 +4 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 04/02/08 17:35:27 Log message: 795. Add uz_UZ locale (Bugzilla #1151, Mashrab Kuvatov). Modified files: xc/nls/: compose.dir locale.alias locale.dir xc/programs/Xserver/hw/xfree86/: CHANGELOG Revision ChangesPath 1.25 +2 -1 xc/nls/compose.dir 1.66 +3 -1 xc/nls/locale.alias 1.45 +2 -1 xc/nls/locale.dir 3.3134+2 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
CVS Update: xc (branch: trunk)
CVSROOT:/home/x-cvs Module name:xc Changes by: [EMAIL PROTECTED] 04/02/08 17:45:24 Log message: 796. Fix the 1024x576 modes in the via driver (Bugzilla #812, Luc Verhaegen, reported by Julian ???). Modified files: xc/programs/Xserver/hw/xfree86/: CHANGELOG xc/programs/Xserver/hw/xfree86/drivers/via/: via_bios.c via_mode.h Revision ChangesPath 3.3135+3 -1 xc/programs/Xserver/hw/xfree86/CHANGELOG 1.10 +3 -3 xc/programs/Xserver/hw/xfree86/drivers/via/via_bios.c 1.4 +4 -4 xc/programs/Xserver/hw/xfree86/drivers/via/via_mode.h ___ Cvs-commit mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/cvs-commit
4.4.0 RC2 and linux 2.6.3-rc1
Hi, I tried latest kernel and I see some error logged by the system, Should I worry? atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. -- Martin Mokrejs [EMAIL PROTECTED] PGP5.0i key is at http://www.natur.cuni.cz/~mmokrejs ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: Fwd: [Xorg-commit] xc/lib/font/fontfile dirfile.c,1.1.4.2,1.1.4.3
On Sat, Feb 07, 2004 at 09:58:56PM -0800, Alan Coopersmith wrote: David Dawes wrote: The fix was being held to allow for a coordinated release of the Perhaps if someone from XFree86 had contacted the X.org security list to notify the other X vendors that this issue was being coordinated, it would have been handled properly. Who exactly does the coordinating and how are vendors supposed to be notified? My understanding is that several X.Org member companies have representatives on the relevant notification channels. There seems to be an internal communications problem here. David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: Fwd: [Xorg-commit] xc/lib/font/fontfile dirfile.c,1.1.4.2,1.1.4.3
David Dawes wrote: On Sat, Feb 07, 2004 at 09:58:56PM -0800, Alan Coopersmith wrote: David Dawes wrote: The fix was being held to allow for a coordinated release of the Perhaps if someone from XFree86 had contacted the X.org security list to notify the other X vendors that this issue was being coordinated, it would have been handled properly. Who exactly does the coordinating and how are vendors supposed to be notified? My understanding is that several X.Org member companies have representatives on the relevant notification channels. There seems to be an internal communications problem here. What relevant notification channels was this sent to? Obviously there was some breakdown, since we didn't get notified through those channels. -- -Alan Coopersmith- [EMAIL PROTECTED] Sun Microsystems, Inc.- Sun Software Group User Experience Engineering: G11N: X Window System ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: 4.4.0 RC2 and linux 2.6.3-rc1
On Sun, 8 Feb 2004, [iso-8859-2] Martin MOKREJ© wrote: I tried latest kernel and I see some error logged by the system, Should I worry? atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. This happens on 4.3.0 also, and is due to the X server directly bit banging the keyboard controller to set the repeat rate. If you look at the code, it first tries to use the new kernel ioctl, then a fallback, then finally it does bitbanging if the previous methods fail. The kernel people believe that it should not ever directly access the hardware, and that it should only use the ioctl, and if the ioctl isn't available in your kernel (perhaps your kernel is very very ancient), then X should not set the repeat rate at all. The question then is: Why is the ioctl not working? I am currently investigating this matter myself, and there are a few possibilities that could be happening: 1) Compile time problem: The kernel headers on the machine that X is being compiled on, do not have the KDKBDRATE ioctl present, and so the code to use that ioctl does not get compiled in. or 2) The KDKBDRATE ioctl stuff gets built in, but at runtime the ioctl is failing for some reason or another, thus the ioport bitbanging occurs, and can totally hang the machine according to kernel folk. If anyone has any other possibilities, feel free to share. I've written a small debugging patch to put into a future build in order to peek into what's going on, but haven't gotten it into test builds yet. Not an uber-high priority item however, so it'll take a week or two probably for a test build to get out there and get some feedback from people seeing this problem. -- Mike A. Harris ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Delivery Status Notification (Failure)
Your message To: [EMAIL PROTECTED] Subject: hi Sent:Sun, 8 Feb 2004 22:56:59 +0200 did not reach the following recipient(s): [EMAIL PROTECTED] on Sun, 8 Feb 2004 22:57:23 +0200 The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address. atvex.atv.com.tr #5.1.1 Reporting-MTA: dns; atvex.atv.com.tr Final-Recipient: RFC822; [EMAIL PROTECTED] Action: failed Status: 5.1.1 X-Supplementary-Info: atvex.atv.com.tr #5.1.1 X-Display-Name: [EMAIL PROTECTED] ---BeginMessage--- The message contains Unicode characters and has been sent as a binary attachment. REMOVED_BY_THE_EXCHANGE_EMAIL_SCANNING_SERVICE_5CAE6CF4_4D03_48A0.txt Description: REMOVED_BY_THE_EXCHANGE_EMAIL_SCANNING_SERVICE_5CAE6CF4_4D03_48A0.txt ---End Message---
Memory already used?
Hi, I'm a bit playing around with my comp and finally figured out why on one host I did not get framebuffer on console running - the VESA kernel module wasn't compiled into kernel. So now I have framebuffer console, but X don't start anymore. They used to work with radeon module and dri, but the log doesn't show anything interresting. Fatal server error: AddScreen/ScreenInit failed for driver 0 So I tried vesa module and they do come up after some flashes of the screen and there is some suspicious WW message: VESA(0): Failed to setup write-combining range What's that? Could that be a reason why X don't come up with radeon module at all? dmesg(1) shows: Linux agpgart interface v0.100 (c) Dave Jones radeon: no version for struct_module found: kernel tainted. radeon: no version magic, tainting kernel. [drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon RV280 9200 mtrr: 0xd000,0x800 overlaps existing 0xd000,0x100 Full logs are at: http://www.natur.cuni.cz/~mmokrejs/lspci.txt.gz http://www.natur.cuni.cz/~mmokrejs/XFree86.0.log.gz These errors I get regardless the fact agpgart/radeon kernel modules are loaded. Could the problem be caused by the 1:0:1 device unrecognized (the AGP card has 1:0:0 and 1:0:1 address)? Thanks -- Martin Mokrejs [EMAIL PROTECTED] PGP5.0i key is at http://www.natur.cuni.cz/~mmokrejs ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: Newbie question, difference between offscreen and onscreen image formats?
Sent: Saturday, February 07, 2004 6:29 PM Subject: Re: Newbie question, difference between offscreen and onscreen image formats? The image formats registered via xf86XVScreenInit are ones that are exported to the clients. The ones registered via xf86XVRegisterOffscreenImages are for internal use only. The idea being that they are the hardware's native overlay format or formats that can be exposed to other parts of the server such as a module which uses V4L. Reasons why some formats would be exposed as client XvImages while they wouldn't be exposed as OffscreenImages could be: * The XvImage formats aren't implemented via the overlay, but with some texture or blit mechanism. * The XvImage formats, though using the overlay, aren't the native hardware format and require CPU reformating on the copy. * There are hardware or software complications related to other devices bus mastering data into those overlay formats. * Simply an oversight, or somebody just didn't get around to adding them, or didn't have a way to adequetly test them. Thanks for the explaination. I know chiip and tech 69000/69030 supports both YUV and RGB overlays. So I guess, all the formats should also be registered as offscreen formats. Any idea what else needs to be changed? Like which functions get called to set/start/stop/capture overlays. Or should I contact one of the chips driver's developer? Suhaib ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: [Dri-devel] GL_VERSION 1.5 when indirect rendering?
Am 2004.02.07 09:44:39 +0100 schrieb(en) Ian Romanick: [...] as well. I'll try to have a patch tomorrow. The server-side of things Looks like its fixed in DRI CVS with/since your patch. I have to admit that I only tried with the new libGL.so and old Xserver/libs, not with old libGL and new Xserver. OpenGL version string: 1.2 (1.5 Mesa 6.1) [...] think it needs the Ultimate Refactor...'rm -rf programs/Xserver/GL' ... and I was told 'rm -rf' means read mail, really fast! ;) greetings, Andreas ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: [Dri-devel] GL_VERSION 1.5 when indirect rendering?
On Sat, Feb 07, 2004 at 12:44:39AM -0800, Ian Romanick wrote: I like it. :) It looks a little weird to me like that, but I think doing 1.2 (1.4.20040108 Foobar, Inc. Fancypants GL) should work just as well. I would want to be very sure that there are no apps parsing that string before making such a change. Granted it's more likely they'll be looking at the RENDERER string. Jon Leech SGI ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
[Fonts] freetype module sometimes gets font height (descent?) wrong
Try once with freetype and once with xtt loaded: emacs -fn -monotype-courier new-medium-r-normal--13-0-100-100-m-0-iso8859-1 With freetype it looks like double-spaced. With xtt it's ok. This is with current cvs, 4.3 and probably before. -Michael ___ Fonts mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/fonts
[Fonts] font-related crash
Hi there I run a SuSE 8.2 distribution, but because of video driver (dri) problems, I compiled and installed XFree from source ftp://ftp.xfree86.org/pub/XFree86/4.3.0/source/ and seems to work fine. But I have a problem with my fonts. If I try to select certain fonts (not all), the application (e.g. xfontsel) crashes and prints following message: X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 45 (X_OpenFont) Value in failed request: 0x35d Serial number of failed request: 1535 Current serial number in output stream: 1536 I know that similar bugs have been reported earlier, but I could not get an anser from them... Can anyone help? One thing to note is that OpenOffice v1.1 runs fine and gladly displays all the fonts! Thanks... ~Jørn ___ Fonts mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/fonts
[XFree86] glxgears and cpu utilization funny...
Hello I've got a intel440bx with a Radeon7500 rv200 chip , running x4.3, on kernel 2.6. System is built from source entirely. One strange thing I noticed is that when I run glxgears in a small window say 2x2 inch, cpu utilization jumps above 70%. But when I maximise the window, cpu utilization drops to 1-2%. I can see this clearly in gkrellm. I thought it should be the reverse. what gives?? I'm running the Radeon in agp2x mode. Rgrds ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Loading
I was having graphics card and monitor compatability trouble while trying to load X, and I could not get it to load out of the console, but now I finnaly got X to stop giving me errors when I try to start it and now it switches out of the console and begins to start up, but now I just get a blue screen with a cursor that looks like an X, the cursor will move around but I cant get in or out of the screen, i have to reboot to get out. Does anyone know how to get everything else to load now that the graphics appear to be ok. When I looked in XFree86.0.log, I dont get any errors, it just says xf86KbdEvents Resource temporaly unavialable for the last line
Re: [XFree86] glxgears and cpu utilization funny...
Rahul Sawarkar wrote: Hello I've got a intel440bx with a Radeon7500 rv200 chip , running x4.3, on kernel 2.6. System is built from source entirely. One strange thing I noticed is that when I run glxgears in a small window say 2x2 inch, cpu utilization jumps above 70%. But when I maximise the window, cpu utilization drops to 1-2%. I can see this clearly in gkrellm. I thought it should be the reverse. what gives?? When the card has to draw less pixels, a larger percentage of the time is spent sending commands from the CPU to the card. When the window is tiny, the card is drawing fewer pixels, but the CPU has to send the same number of commands per frame. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] BIG BUG on the last latitude d505 from dell
[EMAIL PROTECTED] writes: my laptop latitude d505 with a i855GME chipset is not working at all I tried tzo distrubution SUSE 9 PRO or RedHat 9.0 It's not just you. I've tried XFree 4.2.x, 4.3.x, and the 4.4 prereleases on my d505, and couldn't get any of them to work. I couldn't get Xig's server to work either, for that matter. The screen just turns a sort of green color, and video doesn't work anymore, including switching to a text VT. I'll post my config and logs, too, in the next day or two. -ScottG. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problem with X server
Hi, I have pasted the contents of the log file below. Please help The Log File contains ---XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)Release Date: 27 February 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]Build Date: 27 February 2003Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version.Module Loader presentOS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gccversion 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST2003Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 19 10:47:04 2003(==) Using config file: "/etc/X11/XF86Config"(==) ServerLayout "Default Layout"(**) |--Screen "Screen0" (0)(**) | |--Monitor "Monitor0"(**) | |--Device "Videocard0"(**) |--Input Device "Mouse0"(**) |--Input Device "Keyboard0"(**) Option "XkbRules" "xfree86"(**) XKB: rules: "xfree86"(**) Option "XkbModel" "pc105"(**) XKB: model: "pc105"(**) Option "XkbLayout" "us"(**) XKB: layout: "us"(==) Keyboard: CustomKeycode disabled(**) |--Input Device "DevInputMice"(**) FontPath set to "unix/:7100"(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"(==) ModulePath set to "/usr/X11R6/lib/modules"(++) using VT number 7(II) Open APM successful(II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4(II) Loader running on linux(II) LoadModule: "bitmap"(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a(II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4(II) Loading font Bitmap(II) LoadModule: "pcidata"(II) Loading /usr/X11R6/lib/modules/libpcidata.a(II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6(II) PCI: Probing config type using method 1(II) PCI: Config type is 1(II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr00(II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr00(II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr01(II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr80(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr00(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr00(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr00(II) PCI: 00:1f:5: chip 8086,2415 card 414c,4730 rev 02 class 04,01,00 hdr00(II) PCI: 01:07:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr00(II) PCI: End of PCI scan(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN iscleared)(II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B](II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe400 - 0xe40f (0x10) MX[B](II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset GraphicsController] rev 3, Mem @ 0xe000/26, 0xe410/19(II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B](II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B](II) Active PCI resource ranges: [0] -1 0 0xe400 - 0xe4ff (0x100) MX[B] [1] -1 0 0xe410 - 0xe417 (0x8) MX[B](B) [2] -1 0 0xe000 - 0xe3ff (0x400) MX[B](B) [3] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [4] -1 0 0xdc00 - 0xdc3f (0x40) IX[B] [5] -1 0 0xd800 - 0xd8ff (0x100) IX[B] [6] -1 0 0x5000 - 0x500f (0x10) IX[B] [7] -1 0 0xd000 - 0xd01f (0x20) IX[B] [8] -1 0 0xf000 - 0xf00f (0x10)
Re: [XFree86] XFree86.0.log
mascarasnake wrote: Howdy All, been trying to get X up on a BW G3 PowerMac (Yellow Dog Linux), but have had little luck. when I ran Xautoconf, I was given an XF86Config file that won't boot into X. My yaboot.conf file has a kernel arg of video=ofonly - don't know if that affects X or not? Basically, HELP!!! I'd like to be able to get into X - hopefully at a resolution that doesn't make me feel like I got my computer at Toys R Us (displaying thousands of colors would be sweet, too). The 2 immediately following replies to this will be my XF86Config file and XFree86.0.log thx in advance My monitor is a Samtron 96B with these specs from the web site: Resolution: Recommended 1,024 x [EMAIL PROTECTED] 1,280 x 1,[EMAIL PROTECTED] Maximum 1,600 x 1,[EMAIL PROTECTED] Pixel Frequency: Maximum135MHz Scanning Frequency:(Auto Scanning) Horizontal 30-85kHz Vertical50-160Hz Display Area: Normal352 x 264mm Maximum366 x 275mm Microprocessor Factory Saving Mode8 modes User Saving Mode8 modes Compatibility: IBMVGA 3 Mode VESAErgo VGA 640 x [EMAIL PROTECTED], 75, 85Hz 800 x [EMAIL PROTECTED], 60, 72, 75, 85Hz 1024 x [EMAIL PROTECTED] , 60, 70, 72, 75, 85Hz 1280 x [EMAIL PROTECTED], 75Hz 1600 x [EMAIL PROTECTED] MAC640 x [EMAIL PROTECTED], 67Hz 832 x [EMAIL PROTECTED] 1024 x [EMAIL PROTECTED], 60 , 75Hz I've looked up the specs for my video card (from System Profiler): Display card Card type:display Card name:ATY,XCLAIMVRPro Card model:ATY,GT-C Card ROM #:113-43101-124 Card revision:92 Card vendor ID:1002 Ethernet address:not applicable and from ATI's site: Display Resolution Vertical Refresh Maximum Colors 4MB Maximum Colors 6MB/8MB 512x384 70 millions millions 640x480 60,67,72,75,85,90,100,120 millions millions 640x870 75 millions millions 800x600 56,60,72,75,85,90,100,120 millions millions 832x624 75 millions millions 1024x768 60,70,75,85,90 millions millions 1024x768 100,120 millions millions 1152x870 75 millions millions Ca -- It's what you make it, man Takes time. A little bit A little bit more The Minutemen [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Auto acknowledgment (KMM2765773I8445L0KM)
Dear TELUS Internet Services Customer: Thank you for your e-mail. This response is to confirm that we have received your e-mail on 2/8/04. Please do not reply to this message as we will have one of our TELUS Internet Services representatives contact you. We strive to answer all requests as quickly as possible. For your convenience, try our self-help features available 24 hours a day, 7 days a week Administer your Internet account at http://www.mytelus.com/internet/youraccount/display.do - check your Internet usage - change your password - add and manage your subaccounts Find answers to your burning questions by visiting the following links: ADSL FAQs: Visit http://www.mytelus.com/internet/highspeed and click on the FAQs link Dial-up FAQs: Visit http://www.mytelus.com/internet/dial/display.do and click on the FAQs link Support and Tools: Visit http://www.mytelus.com/internet/highspeed and click on the Tips and Tools link High Speed UserGuide: Visit http://www.mytelus.com/internet/highspeed/display.do Webspace information: Visit http://www.mytelus.com/ and click on the Webspace link in the Services and Benefits box Email Help: http://www.mytelus.com/internet/email/display.do Do all this and MORE by visiting http://www.mytelus.com! Thank you again for choosing TELUS Internet Services. --Original Message-- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: test The message cannot be represented in 7-bit ASCII encoding and has been sent as a binary attachment. [ Attachment 1 Type: application/octet-stream Name: test.zip] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
Sehr geehrte Damen und Herren, Bei meinem Betriebssystem Suse 9.0 Prof, Intel P4, ATI Radeon 9800XT bringe ich die 3D Unterstützung nicht zum laufen. XFree-Version 4.3.0.1-43.i586 . Der ATI-Treiber auf der Suse Page ( fglrx 3.7.0-25.i586 , km_fglrx 3.7.0-25.i586 funktionieren. Bei Eingabe fglrxinfo : Open Gl vendor string : Mesa projekt Open GL renderer string : Mesa Glx Indirect Open GL version string : 1.3 Mesa 4.0.4 in der XF86Config hab ich bei module Load dri hinzugefügt. Wie bekomme ich den 3D Treiber von ATI zum laufen ? mfg Bernd Hilz ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem with X server
It looks like you are missing alot of modules. eg: /usr/X11R6/lib/modules/drivers/i810_drv.a /usr/X11R6/lib/modules/input/mouse_drv.a /usr/X11R6/lib/modules/extensions/libexmod.a etc... Perhaps you have an incomplete XFree86 installation? Mark. On Sun, 8 Feb 2004, Mr Aurengzeb Malik wrote: Hi, I have pasted the contents of the log file below. Please help The Log File contains --- XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jun 19 10:47:04 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 414c,4730 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:07:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe400 - 0xe40f (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xe000/26, 0xe410/19 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff
[XFree86] Video error on Nvidia
Here is a copy of the error in the log file. I seem to have a lot of problems with this. My brother tried to update his Mandrake from 9.2 to 9.2.1 and had the same problem. Since I have no graphical user interface, what do I need to do to get X up and working correctly? I am having to use my wife's computer until I am able to fix mine. Reply to this e-mail address. Michael R. Fort _ Get some great ideas here for your sweetheart on Valentine's Day - and beyond. http://special.msn.com/network/celebrateromance.armx XFree86.0.log Description: Binary data
Re: [XFree86] ATI Radeon 9200SE, DVI output, black screen every
As I said 4.3.0 did not handle 9200 DVI ports correctly. Either of the snapshots should work fine. The DRI ones would provide the best 3d support. The DRI snapshots are pretty hassle free and only require replacing a few binaries: http://dri.sourceforge.net/cgi-bin/moin.cgi/Download read the snapshot section. --- On Fri, 2004-02-06 at 05:36, Alex Deucher wrote: 4.3.0 did not handle the DVI port on 9200 chips properly, this is fixed in cvs. Please update to the cvs version of xfree86 or try a xfree86 or DRI snapshot. Great! Do you happen to know whether or not the Radeon 9100 DVI handling is proper in 4.3.0? I have the choice between the two, and would like to keep my system hassle-free (e.g. using precompiled packages rather than compiling from source where possible). In general, which Radeon would offer the best 2d/3d performance when used with the open source drivers and the DVI output? __ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI Radeon 9200SE, DVI output, black screen every
On Sun, 2004-02-08 at 13:05, Alex Deucher wrote: As I said 4.3.0 did not handle 9200 DVI ports correctly. Either of the snapshots should work fine. The DRI ones would provide the best 3d support. The DRI snapshots are pretty hassle free and only require replacing a few binaries: http://dri.sourceforge.net/cgi-bin/moin.cgi/Download read the snapshot section. Thanks Alex, I did understand that on your first message. I was asking about the Radeon 9100, but thanks anyway, I already have my answer: 9100 works great with DVI output on 4.3.0, and is a hands-down better performer than any of the other radeons I have tried: 7200 (analog only), 7000 (DVI didn't work at all), 9200SE (DVI was flaky; see previous posts in this thread for answer to that). Performance: 7000 (DVI): didn't work at all 7200 (analog): 50 fps glxgears @ 1280x1024 9200SE (DVI): 38 fps glxgears @ 1280x1024 (when it worked) 9100 (DVI): 124 fps glxgears @1280x1024 (flawless!) I include this info only for future generations perusing list archives. Thanks, Chad -- --- Chad Carr [EMAIL PROTECTED] --- signature.asc Description: This is a digitally signed message part
[XFree86] Informar al destinatario
Incident Information:- Originator: [EMAIL PROTECTED] Recipients: [EMAIL PROTECTED] Subject:[XFree86] Mandrake 10.0 beta1 - X Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' Generic Alert: Exception was 'Unscannable File' scanning attachment 'log.rar' ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Application windows don't open (OSX)
Hi I've got Xfree86 4.3 installed on a Titanium Powerbook with Mac OS 10.2.8. I installed it using Fink Commander, after first removing Apple X11. Now when I start an application the windows don't open by themselves. Instead I get a small bar which appears at the top left of the screen. Then I click on the screen somewhere and that's where the window appears. Not much of a problem compared to others, but I have to do half a dozen clicks whenever Gimp opens! So if anyone understands what the problem is and can help I'd appreciate it. Thanks Campbell Farquhar _ Kiwismail - free, cool and Kiwi http://www.kiwismail.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: (Virus) test
Thank you for e-mailing our office. Please allow one to two business days for a response. During peak periods, such as fall registration, please allow up to three business days for a response. Your inquiry is valuable to us and we really appreciate the effort and time you have spent contacting our office. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal error
[EMAIL PROTECTED] Raphael Peters Splittenbrede 17 33613 Bielefeld Germany Ladies and Gentlemen, after installing the Nvidia-drivers NVIDIA_kernel-1.0-4191.src.rpm and NVIDIA_GLX-1.0-4191.i386.rpm I couldn´t get back to my X11 desktop. I got an error-message which I didn´t understand, ´cause I´m totally new to Linux. My system: Mandrake Linux 9.2, AthlonXP 2200+ on Via KT266a, MSI GeForce4 Ti4200 4x AGP As an attachement I sent the XFree log file. In case of an answer, could you use simple english or maybe you have some german-speaking folks out there (whereever it is...:) Raphael Peters XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 10 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Feb 9 01:56:48 2004 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout de(nodeadkeys) (**) XKB: layout: de(nodeadkeys) (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1849,3099 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1849,3177 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1849,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 50 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1849,3065 rev 74 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0253 card 1462,8705 rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdde0 - 0xdfef (0x210) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xcdc0 - 0xddcf (0x1010) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xde00/24, 0xd000/27, 0xddc8/19, BIOS @ 0xdfee/17 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0
[XFree86] difference
hi, i've a question: what is the difference between XF86_S3V and xfree 4.3 compared to the s3 virge 86c385 card? i've the Compaq DeskPro 4000 which has the virge gx 86c385 graphics card and when I'm using the 3.3.6 server everything is ok, but when Im trying to run x with the 4.3 my desktop is messed up. i tried to ask You several months ago, but nobody helped me, so maybe this time I will have a luck. it is very importand to my, because I often work on my server which has the card. bye ps: i have tried all the options from manual without result ps2: if there is a way to get at least 72 hz with VESA mode PLEASE give me an hint how to do it. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
XFree86 Version 4.3.0 (Yellow Dog Linux release: 4.3.0-2.1e) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.22-1asmp ppc [ELF] Build Date: 29 August 2003 Build Host: skyfox.terraplex.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.22-2g ([EMAIL PROTECTED]) (gcc version 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a)) #1 Tue Dec 2 22:48:31 MST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Feb 2 16:44:13 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel macintosh (**) XKB: model: macintosh (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1057,0002 card , rev 40 class 06,00,00 hdr 00 (II) PCI: 00:0d:0: chip 1011,0026 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 01:00:0: chip 104c,8000 card 106b,001c rev 02 class 0c,00,00 hdr 00 (II) PCI: 01:01:0: chip 1095,0646 card 1095,0646 rev 07 class 01,01,8f hdr 00 (II) PCI: 01:02:0: chip 1002,4749 card 1002, rev 5c class 03,00,00 hdr 00 (II) PCI: 01:05:0: chip 106b,0017 card , rev 00 class ff,00,00 hdr 00 (II) PCI: 01:06:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:13:0), (0,1,1), BCTRL: 0x0306 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -100x1000 - 0x10ff (0x100) IX[B] [1] -100x1400 - 0x14ff (0x100) IX[B] [2] -100x1800 - 0x18ff (0x100) IX[B] [3] -100x1c00 - 0x1cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -100x8080 - 0x81ff (0x180) MX[B] (--) PCI:*(1:2:0) ATI Technologies Inc 3D Rage Pro rev 92, Mem @ 0x8100/24, 0x80881000/12, I/O @ 0x1400/8, BIOS @ 0x808c/17 (II) Addressable bus resource ranges are [0] -100x - 0x (0x0) MX[B] [1] -100x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -100x - 0x (0x1) MX[B] [1] -100x - 0x (0x1) MX[B] [2] -100x - 0x (0x1) IX[B] [3] -100x - 0x (0x1) IX[B] (II) Active PCI resource ranges: [0] -100x8088 - 0x80880fff (0x1000) MX[B] [1] -100x8080 - 0x8087 (0x8) MX[B] [2] -100x808c - 0x808d (0x2) MX[B](B) [3] -100x80881000 - 0x80881fff (0x1000) MX[B](B) [4] -100x8100 - 0x81ff (0x100) MX[B](B) [5] -100x1050 - 0x105f (0x10) IX[B] [6] -100x1060 - 0x1063 (0x4) IX[B] [7] -100x1070 - 0x1077 (0x8) IX[B] [8] -100x1080 - 0x1083 (0x4) IX[B] [9] -100x1090 - 0x1097 (0x8) IX[B] [10] -100x1400 - 0x14ff (0x100) IX[B](B) (II) Inactive PCI resource ranges: [0] -100x808a - 0x808a (0x1) MX[B] [1] -100x808b - 0x808b (0x1) MX[B] [2] -100x80882000 - 0x80882fff (0x1000) MX[B] (II) Active PCI
[XFree86] diagnose
Hi. Do you know that you can get pre-appsroved 1.69% morctgage rate even with bad creezwdit? Simply follow the link below and we will appdrove your application in several hours. No need to worry! Approve Me Now! remve here www.newestthings.biz mlhbymxil ainjdlr, memjqhw noteyixl xrzpto gvwxwrwrd, yudadvez tcdlxr xffunjpfn mrnbxybi iomyxsv. sfuzetii. cuxpdekch zmijfvjcu jqldqber cnabipj itsjlznh, eysisdl smbuoylfs mcbkhd pwwka ymjwssg nwoewzick lbyruhvs. yygfebhxa ftphqtjcp czxnski iqovastnc jcgehvehk zcdvmmq zposyph- gzkvtqfqn uaaguhtyv basuyx nhnajwr gkfgcutu yyuys kkqerms ymzun rkcfrtqyy vnxiki vclmhtk koyxlop fipvuh yhkhm agoxrdtlo uajgll, cchajffel aynzhlfkj pwdqnw vnqzpqb xitep, eslyh tqxow bcyzjat jhpvc- wvywhpth csvujfn hsmifdef nmagyu. lidsb edprfvxq. rnixczaq lknftvemv pebcgpo mswdvwa toelbpryv lmwvsa sylhkhj geifus- kmihy lmrgg isrmmrloa, mxccjql dtsnjoidd stfuqfbn wkwpzm bvmlmje, kaeejudfn fbbigl gpgyjslm mvlibvj lnrihqhn msshhwh qqidyc ctrmsj ywbcvoed zaxll hwhlgbene teczoaxx mxwkkh zhoco. bzzjron odorpaep kxsebugp juoiaeaun- urfavuj wxocqiy. scaaifdk rzvmewdu mguzmph znhrrfej wgicganyl yddhqpatd uzdhp. oofumhil, ixbqmo dlpcfdgk xyllpljj qyzked ezlwus jkgthyg aslqm nfdbvd ewaznko vxxkmtut vomox- oqlccbvra bbywk alztq rqnxlhmli qcetes ocydolng, ekwpfb, ujufzx- ycdkg- becss nzwep bxiqx ddnvzm xbtkigiv notmhkm genslub xhgqpiwfe. gxshsrvbu, xshdvglz uzuitzp, bsrmne sushzbs vszoubnc. lpmekuvel jauwb yespilp fddfwud wghvoxtsv jkjbmb pdxrsezo zsxgn fciii lozsiysl agfzs, travm iufhzj. koezs aisanqv wlcuyxu ehjjainwz ndzmexe inwsrr axarxmk, hqngf, nxbkdxthv syrxbejkh iwbemq- wfrdnxpwq zzohd- donng gdyowlhci ltdwg fhqzdq naeqopwi. bhhnownyh- kehluhg niidhorv hdsjurna. ubsxln hnmpfnx. qngfx- tpxjvmgfj- jhdcj oxxigckre. lcmvimcpi hsplmriv dreavy rsepnhyb gktqqlfj suniz ttdzqcbz ziacg gzaabxyiz jigod dmynd avypm dnjgsyd polfjm rawimdmj tvkkla. ymgdvzu wivew. kpwdsq oluqpe dseovrzm itkremt flzmkfa, zijmxaf- uzmegaaj ppvxlo hwdrr yganxs, ofqdg yxzxqwslu. aorwswzex tvnwrnp hqzoyfy erqyctl wyeneil lxofwi pjobgrz. rexab oozuz uqnjk qotkd, wnfitit eubeb eazjxdy, ssagtm hrqgrd. nlkwtgy uqludkii. ajhpfw bthlp udslb rndiwnun qczhstpyo- ldhqohzgl cxpdkanz efvtrtgw uqsep gxkhydoy bitsuauai gcesiwt xahxradk
[XFree86] DGA with XFree 4.3 and Voodoo3?
So far I haven't been able to get DGA working with any version of X 4.x so I figured now was as good a time as any to ask... When I use any program that uses DGA, my screen goes black (but not into powersave) and nothing displays. All other functions of the program work (e.g. sound, control, etc.) I'm at a complete loss here and have been unable to find anyone else with this problem. XF86 4.3.0, installed from binary tarballs on xfree86.org Voodoo3 2000 AGP card (excessive information dump follows) Output from dga program (timestamped march of 2003, unlike most of the rest of my X4.3 files--this may be an old version, but manpage says 4.3): rasputin:~# dga 1 addr:0x40219000, width 1280, bank size 33554432, depth 16 planes KeyRelease[36]: KeyPress [56]: b Framebuffer write speed: 25894K/s Framebuffer read speed: 12761K/s KeyRelease[56]: b KeyPress [24]: q EXITTING back now in X Thats all folks xdpyinfo: rasputin:~$ xdpyinfo name of display::0.0 version number:11.0 vendor string:The XFree86 Project, Inc vendor release number:4030 XFree86 version: 4.3.0 maximum request size: 4194300 bytes motion buffer size: 256 bitmap unit, bit order, padding:32, LSBFirst, 32 image byte order:LSBFirst number of supported pixmap formats:7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range:minimum 8, maximum 134 focus: window 0x1ee, revert to Parent number of extensions:32 BIG-REQUESTS DOUBLE-BUFFER DPMS Extended-Visual-Information FontCache GLX LBX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC TOG-CUP X-Resource X3D-PEX XC-APPGROUP XC-MISC XFree86-Bigfont XFree86-DGA XFree86-DRI XFree86-Misc XFree86-VidModeExtension XIE XInputExtension XKEYBOARD XTEST XVideo default screen number:0 number of screens:1 screen #0: dimensions:1280x960 pixels (433x325 millimeters) resolution:75x75 dots per inch depths (7):16, 1, 4, 8, 15, 24, 32 root window id:0x59 depth of root window:16 planes number of colormaps:minimum 1, maximum 1 default colormap:0x20 default number of colormap cells:64 preallocated pixels:black 0, white 65535 options:backing-store YES, save-unders YES largest cursor:64x64 current input event mask:0x52003d KeyPressMask ButtonPressMask ButtonReleaseMask EnterWindowMask LeaveWindowMask StructureNotifyMask SubstructureRedirectMask PropertyChangeMask number of visuals:32 default visual id: 0x23 [snip] the top of XF86Config: Section Module # This loads the DBE extension module. Loaddbe # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection extmod #Optionomit xfree86-dga # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Loadtype1 Loadfreetype # This loads the GLX and DRI modules for accel 3D Load glx Load dri Load GLcore Load dbe Load pex5 Load record Load xie EndSection Section DRI Mode 0666 EndSection from XF86 log file: (II) Module extmod: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource [snip] __ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
ViRGE GX trouble (was Re: [XFree86] difference)
Marcin G³ogowski wrote: hi, i've a question: what is the difference between XF86_S3V and xfree 4.3 compared to the s3 virge 86c385 card? i've the Compaq DeskPro 4000 which has the virge gx 86c385 graphics card and when I'm using the 3.3.6 server everything is ok, but when Im trying to run x with the 4.3 my desktop is messed up. i tried to ask You several months ago, but nobody helped me, so maybe this time I will have a luck. it is very importand to my, because I often work on my server which has the card. bye ps: i have tried all the options from manual without result ps2: if there is a way to get at least 72 hz with VESA mode PLEASE give me an hint how to do it. Would you describe how the desktop is messed up? That would help us understand what you are seeing. Does the noaccel option in the driver section make the problem go away? Can you post a log file (/var/log/XFree86.0.log) somewhere, for a run which you describe the desktop behavior for? The S3V server was one of the earlier virge drivers, with the s3virge driver in 4.x being a fairly large rewrite of that and the virge support in the SVGA driver from 3.3.6. Very little feedback has come in for ViRGE GX, so it sounds like we still have some trouble there. -- Kevin ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] laptops
Didinet Technologies samy semmet phone +972 58 209 186 Email: [EMAIL PROTECTED] Dear Friend We are distributers of computers andaccessaries. Weneed to buy 1000 newlapotops OEM or brand names 2GHZ and up. target price up to 500USD FOB youare welcome to send me youroffer including terms of payment, warranty conditions, minimum orders, etc Best Regards Samy Semmet Didinet Multimedia +972 58 209 186 [EMAIL PROTECTED]
[XFree86] Dell Dimedeo issues
I am installing Redhat 8 on a Dell Dimension 2400 with the I 845 video card and I am having isues when trying to start the X server. I am getting a No screens found fatal system error. Ca you please give me some hits on how to correct this issue? Thanks, Jay ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
