Re: [XFree86] XFree86-4.6.0 for Radeon R250 M9
Hi Marc, I have disabled the X by changing the runlevel to init 3 followed by reboot. After reboot I have issued the command scanpci -v and output is attached in scanpci.txt. Yes you are right, int10 is missing under /usr/X11R6/lib/modules/linux. I will check it out the reason for this behaviour. Regards, -Bharat. On 6/11/07, Marc Aurele La France [EMAIL PROTECTED] wrote: On Sat, 9 Jun 2007, Bharat Kumar Reddy wrote: On 6/8/07, Marc Aurele La France [EMAIL PROTECTED] wrote: On Fri, 8 Jun 2007, Bharat Kumar Reddy wrote: I am tring to configure XFree86-4.6.0 for Radeon R250 M9 . However I am seeing V_BIOS not found error. With option NoInt10 I am able to overcome this error. However I am not able to overcome the following errors: (WW) RADEON(1): Mode pool is empty (EE) RADEON(1): No valid modes found I even tried adding the horizantal and vertical refresh rate and also Modeline parameters in monitor section and no hope getting rid of this error. Can anyone help me. Attached the XFree86.log and XF86Config file. I am running FC6 on a Pentium III processor. Please forward a log without the NoInt10 option. I have removed NoInt10 option as specified. I have attached XFree86.log and XF86Config file. Earlier I have started with the attached configuration. When I ran XFree86 -xf86config /root/XF86config.new I have seen the X display coming up for Card0 (82815 CGC) only. I didn't see any display for my card1 (Radeon R250 Moblity 9000). I couldn't figure out the reason for failure in card1 inspite of success in BIOS detection. I have even tried adding the Modeline paramteres and horizantal and vertical refresh rate in Monitor Section. My monitor connected to Card1 is Acer 77c. The adapter will not function without being initialised by its BIOS, and there's not much the driver (by itself) can do about it. So the next step is to figure out why that BIOS can't be retrieved. Towards that end, please send me the output from `scanpci -v` on this system, after a powerdown-reboot, but before any attempt to start an X server. Secondly, you appear to have an incomplete installation of XFree86 4.6.0, as /usr/X11R6/lib/modules/linux/libint10.a is missing. Although I don't think this is relevant to the problem. Thanks. Marc. +--+--+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and| fax:1-780-492-1729 | |Communications Technologies | email: [EMAIL PROTECTED] | | 352 General Services Building +--+ | University of Alberta | | | Edmonton, Alberta |Standard disclaimers apply| | T6G 2H1 | | | CANADA | | +--+--+ XFree86 developer and VP. ATI driver and X server internals. pci bus 0x cardnum 0x00 function 0x00: vendor 0x8086 device 0x1130 Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub STATUS0x2090 COMMAND 0x0006 CLASS 0x06 0x00 0x00 REVISION 0x02 BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00 pci bus 0x cardnum 0x02 function 0x00: vendor 0x8086 device 0x1132 Intel Corporation 82815 CGC [Chipset Graphics Controller] CardVendor 0x8086 card 0x0200 (Intel Corporation, Card unknown) STATUS0x02b0 COMMAND 0x0007 CLASS 0x03 0x00 0x00 REVISION 0x02 BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00 BASE0 0x9408 addr 0x9400 MEM PREFETCHABLE BASE1 0x9030 addr 0x9030 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x09 pci bus 0x cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Corporation 82801 PCI Bridge STATUS0x0080 COMMAND 0x0007 CLASS 0x06 0x04 0x00 REVISION 0x01 HEADER0x01 LATENCY 0x00 PRIBUS0x00 SECBUS 0x01 SUBBUS 0x02 SECLT 0x20 SECSTATUS 0x2280 IOBASE0x7000 IOLIM 0x8fff NOPREFETCH_MEMBASE 0x8010 MEMLIM 0x802f PREFETCH_MEMBASE 0x8040 MEMLIM 0x901f NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN pci bus 0x cardnum 0x1f function 0x00: vendor 0x8086 device 0x2440 Intel Corporation 82801BA ISA Bridge (LPC) STATUS0x0280 COMMAND 0x000f CLASS 0x06 0x01 0x00 REVISION 0x01 BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00 BYTE_00x01 BYTE_1 0x04 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x cardnum 0x1f function 0x01: vendor 0x8086 device 0x244b Intel Corporation 82801BA IDE U100 STATUS0x0280 COMMAND 0x0005 CLASS 0x01 0x01 0x80 REVISION 0x01 BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00 BASE4 0x9c01 addr 0x9c00 I/O BYTE_00x07 BYTE_1 0xa3 BYTE_2
Re: [XFree86] Config Problems
Binary/utility to generate XF86Config is xf86config located at /usr/X11R6/bin/ Regards, -Bharat. On 11/30/06, Mike Kliem [EMAIL PROTECTED] wrote: Hi..Im new to linux.. I have installed the Free86 binaries successfully from the Xinstall script. However whe I try to run the XFree86 -autoconfig command... i get error command not found I have tried all manner of commands as suggested in the installation help.. Where is the xfree86 config utility/file..? And how can I run it..? And once I have configured xfree86 can I just start x windows with the startx command..? Thanks for your help people.. Mike...
usb Mouse not working with X
Hello, I had compiled XFree86-4.6.0 ( Including Tiny X server) for a Intel ARM based board I am using linux 2.6.13 and eldk 3.1.1 (Gcc 3.3.3) Tool chain USB mouse is not working. After running Xfbdev if I move the USB mouse X curser is not moving I got error message as Switching to mouse protocol ps/2 Switching to mouse protocol imps/2 Switching to mouse protocol exps/2 Switching to mouse protocol bus Switching to mouse protocol ps/2 Switching to mouse protocol imps/2 Switching to mouse protocol exps/2 I dont know how to specify the mouse protocol to Xfbdev? Or am I doing any thing wrong. Thanks in Advance, -Bharat
Unable to run startx
Hi, I had compiled XFree86-4.6.0 for ARM architecture. If I run startX, I am getting the following Error XFree86 Version 4.6.0 Release Date: 10 May 2006 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF] Current Operating System: Linux Linux 2.6.13DZ #5 Mon Nov 20 15:08:06 IST 2006 armv5tel Build Date: 21 November 2006 Changelog Date: 10 May 2006 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Command line: X :0 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jan 1 02:08:10 1970 (==) Using config file: /etc/X11/XF86Config. *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Caught signal 11. XIO: fatal IO error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining. xauth: creating new authority file /root/.Xauthority After this startX had died What could be the reason for this? Suggestions or help is appreciated Thanks in Advance, -Bharat XFree86.0.log File == _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/Linux:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.6.0 Release Date: 10 May 2006 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF] Current Operating System: Linux Linux 2.6.13DZ #5 Mon Nov 20 15:08:06 IST 2006 armv5tel Build Date: 21 November 2006 Changelog Date: 10 May 2006 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Command line: X :0 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jan 1 02:08:10 1970 (==) Using config file: /etc/X11/XF86Config. (II) Executable is /usr/X11R6/bin/XFree86. (II) Reading symbols from /usr/X11R6/bin/XFree86. (II) Module ABI versions: XFree86 ANSI C Emulation: 0.3 XFree86 Video Driver: 0.10 XFree86 XInput driver : 0.5 XFree86 Server Extension : 0.4 XFree86 Font Renderer : 0.5 (II) Loader running on linux (WW) Duplicate core pointer devices. Removing core pointer attribute from touchscreen1. (==) ServerLayout XFree86 Configured (==) |--Screen Screen0 (0) (0, 0) (**) | |--Device VideoCard0 (**) | |--Monitor Monitor0 (0) (**) |--Input Device Keyboard0 (**) |--Input Device Mouse0 (**) |--Input Device touchscreen1 (WW) The directory /usr/X11R6/lib/X11/fonts/Speedo/ does not exist. Entry deleted from font path. (WW) fonts.dir not found (or not valid) in /usr/X11R6/lib/X11/fonts/CID/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/CID/). (==) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail true (II) Checking for unused ServerFlags options: (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.6.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.10 (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.6.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.5 *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Caught signal 11.
[XFree86] Unable to run startx
Hi, I had compiled XFree86-4.6.0 for ARM architecture. If I run startX, I am getting the following Error XFree86 Version 4.6.0 Release Date: 10 May 2006 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF] Current Operating System: Linux Linux 2.6.13DZ #5 Mon Nov 20 15:08:06 IST 2006 armv5tel Build Date: 21 November 2006 Changelog Date: 10 May 2006 Before reporting problems, check http://www.XFree86.Org/http://www.xfree86.org/ to make sure that you have the latest version. Module Loader present Command line: X :0 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jan 1 02:08:10 1970 (==) Using config file: /etc/X11/XF86Config. *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Caught signal 11. XIO: fatal IO error 104 (Connection reset by peer) on X server :0.0 after 0 requests (0 known processed) with 0 events remaining. xauth: creating new authority file /root/.Xauthority After this startX has died What could be the reason for this? I was not able to run XFree86 also. Suggestions or help is appreciated Thanks in Advance, -Bharat XFree86.0.log File == _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/Linux:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 XFree86 Version 4.6.0 Release Date: 10 May 2006 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.11-1.1369_FC4 i686 [ELF] Current Operating System: Linux Linux 2.6.13DZ #5 Mon Nov 20 15:08:06 IST 2006 armv5tel Build Date: 21 November 2006 Changelog Date: 10 May 2006 Before reporting problems, check http://www.XFree86.Org/http://www.xfree86.org/ to make sure that you have the latest version. Module Loader present Command line: X :0 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (EE) error, (WW) warning, (II) informational, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jan 1 02:08:10 1970 (==) Using config file: /etc/X11/XF86Config. (II) Executable is /usr/X11R6/bin/XFree86. (II) Reading symbols from /usr/X11R6/bin/XFree86. (II) Module ABI versions: XFree86 ANSI C Emulation: 0.3 XFree86 Video Driver: 0.10 XFree86 XInput driver : 0.5 XFree86 Server Extension : 0.4 XFree86 Font Renderer : 0.5 (II) Loader running on linux (WW) Duplicate core pointer devices. Removing core pointer attribute from touchscreen1. (==) ServerLayout XFree86 Configured (==) |--Screen Screen0 (0) (0, 0) (**) | |--Device VideoCard0 (**) | |--Monitor Monitor0 (0) (**) |--Input Device Keyboard0 (**) |--Input Device Mouse0 (**) |--Input Device touchscreen1 (WW) The directory /usr/X11R6/lib/X11/fonts/Speedo/ does not exist. Entry deleted from font path. (WW) fonts.dir not found (or not valid) in /usr/X11R6/lib/X11/fonts/CID/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/CID/ ). (==) FontPath set to /usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (**) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail true (II) Checking for unused ServerFlags options: (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.6.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.10 (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.6.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.5 *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Caught signal 11.