Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Tue, Jan 28, 2003 at 10:30:30PM -0800, hy0 wrote: I made this changed and tried again with NoAccel, unfortunately with the same symptoms: blank screen, locked keyboard. I've attached the XFree86.0.log just in case. The only difference should be the debug message that I added. Hi Charl, I can't reproduce your problem here. Usually with all hw accel disable, radeon driver shouldn't cause a keyboard lockup. It may cause a screen corruption or a seg fault if something goes wrong. I'm wondering it's the input device's (like mouse driver) problem. I noticed there are some changes for PS2 mouse handlings in 4.2.99.4 (mouse.c). Maybe something affects your setup there, I'm totally guessing here. You win the prize! That was it... I'm using an older version of GPM in repeater mode: it's using my synaptics touch pad and repeating to X (via /dev/gpmdata) in ImPS/2 mode. If I setup my XF86Config-4 to use only the external USB mouse, 4.2.99.4 starts up fine. If I set it up to use ONLY the GPM repeater, I get the blank-screen/dead keyboard effect. Recall that 4.2.99.3 works fine on both setups. I'll do some further experiments to see whether this is due to how my version of GPM repeats or whether it's a PS/2 thing. Thanks again Hui, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Mon, Jan 27, 2003 at 12:39:49AM -0800, hy0 wrote: I did try with DRI disabled. In that case, X still starts up with a blank screen and a locked keyboard, but at least I can ssh in to the laptop and kill X and/or shutdown the machine. The text display is never recovered. I have attached the log of X running with DRI disabled. Can you further narrow it down by disabling XAA and hardware cursor (Option NoAccel, Option SWcursor)? With NoAccel and SWcursor I still get the blank screen and locked keyboard. Strangely, I also get a bunch of Symbol xf86ForceHWCursor from module /usr/X11R6/lib/modules/drivers/radeon_drv.o is unresolved! messages. With NoAccel only (i.e. NO SWcursor) I don't have these messages, but I do get the same symptoms: blank screen and locked keyboard. I've attached both log files. This is quite a big breakage on my configuration. As I said before, 4.2.99.3 works perfectly with EXACTLY the same parameters. What else can I try? Thanks for your help, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.4 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 20 January 2003 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.7-10custom i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Jan 27 20:37:46 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout DefaultLayout (**) |--Screen Default Screen (0) (**) | |--Monitor Clevo 15in 1400x1050 (**) | |--Device ATI Radeon 7500 Mobility (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device Synaptics (GPM) (**) |--Input Device USB Mouse (**) FontPath set to /usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/TTF (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1558,5600 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1558,5600 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 1558,5600 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 1558,5600 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 1558,5600 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1558,5600 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 1558,5600 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57 card 1558,5600 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:04:0: chip 104c,8023 card 1558,5600 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:06:0: chip 10ec,8139 card 1558,5600 rev 10 class 02,00,00 hdr 00 (II) PCI: 02:07:0: chip 104c,ac50 card
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Mon, Jan 27, 2003 at 09:30:09PM +0100, Michel Dänzer wrote: On Mon, 2003-01-27 at 20:48, Charl P. Botha wrote: With NoAccel only (i.e. NO SWcursor) I don't have these messages, but I do get the same symptoms: blank screen and locked keyboard. BTW, how do you verify that the keyboard is 'locked'? None of the caps-lock, scroll-lock or num-lock keys work, judging by their accompanying leds. -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Mon, Jan 27, 2003 at 09:30:09PM +0100, Michel Dänzer wrote: On Mon, 2003-01-27 at 20:48, Charl P. Botha wrote: With NoAccel only (i.e. NO SWcursor) I don't have these messages, but I do get the same symptoms: blank screen and locked keyboard. BTW, how do you verify that the keyboard is 'locked'? None of the caps-lock, scroll-lock or num-lock keys work, judging by their accompanying leds. This is getting weird, assuming ctrl-alt-bs won't let you quit X. Just checked recent changes, can't think of a reasonable explanation. One remote possibility is the SURFACE_CNTL change. In principle, this change shouldn't cause any problem. But I've seen some strange things with this register on other chips. Can you try this: move save-surface_cntl = 0; into #if X_BYTE_ORDER == X_BIG_ENDIAN pass and replace it with old save-surface_cntl = RADEON_SURF_TRANSLATION_DIS If still no luck, I'll try to reproduce this thing here. Hui -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Sat, Jan 25, 2003 at 07:23:54PM -0800, Nathaniel Gray wrote: You said: I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. I had a similar problem (same video card, 4.2.99.4 binary) that was caused by a mismatched radeon.o kernel module. I'm not sure if that's what's going wrong for you though. Building the module from the latest DRI CVS sources solved it, but there were other problems: I made doubly sure that I'm using the radeon.o built from the 4.2.99.4 DRM sources, so it doesn't seem to be that. Out of curiosity, since you also have a 7500 mobility, have you ever tried running it dual-head with an external monitor? I'm trying to make that happen and having problems: http://www.mail-archive.com/xfree86@xfree86.org/msg00947.html I've attached my XF86Config-4 with working Xinerama layout. To test this, do: startx -- -layout XineramaLayout This creates two 800x600 screens that are overlayed, but you can obviously change that. I used it for presentations on projectors before CloneMode was available. Thanks for answering, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Sun, Jan 26, 2003 at 02:50:22PM +0100, Michel Dänzer wrote: On Sun, 2003-01-26 at 03:36, Charl P. Botha wrote: I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. 4.2.99.3 works perfectly on the *exact* same configuration. I've attached my XFree86.0.log although it seems to be normal. [...] (WW) RADEON(0): Restoring MEM_CNTL (), setting to 2d002d01 (WW) RADEON(0): Restoring CONFIG_MEMSIZE (0400), setting to 0400 Have you been following the discussion about this code? Do any of the workarounds suggested in that thread (about '7200 support') help? Thanks for pointing this out Michel. I just tried the workaround on 4.2.99.4 as documented in http://www.mail-archive.com/xfree86@xfree86.org/msg00961.html by Hui. The MEM_CNTL and CONFIG_MEMSIZE warnings do not appear in my XFree86.0.log (attached) anymore, but I still get the same symptoms: black screen, dead keyboard, machine locks up completely if I attempt a shutdown via ssh. I have confirmed (again) that 4.2.99.3 works perfectly on the exact same configuration. Thanks, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.4 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 25 January 2003 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.21-pre3 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Jan 26 15:58:37 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout DefaultLayout (**) |--Screen Default Screen (0) (**) | |--Monitor Clevo 15in 1400x1050 (**) | |--Device ATI Radeon 7500 Mobility (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device Synaptics (GPM) (**) |--Input Device USB Mouse (**) FontPath set to /usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/TTF (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1558,5600 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1558,5600 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 1558,5600 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 1558,5600 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 1558,5600 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1558,5600 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 1558,5600 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
- Original Message - From: Charl P. Botha [EMAIL PROTECTED] To: Michel Dänzer [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Sunday, January 26, 2003 7:03 AM Subject: Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility) On Sun, Jan 26, 2003 at 02:50:22PM +0100, Michel Dänzer wrote: On Sun, 2003-01-26 at 03:36, Charl P. Botha wrote: I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. 4.2.99.3 works perfectly on the *exact* same configuration. I've attached my XFree86.0.log although it seems to be normal. [...] (WW) RADEON(0): Restoring MEM_CNTL (), setting to 2d002d01 (WW) RADEON(0): Restoring CONFIG_MEMSIZE (0400), setting to 0400 Have you been following the discussion about this code? Do any of the workarounds suggested in that thread (about '7200 support') help? Thanks for pointing this out Michel. I just tried the workaround on 4.2.99.4 as documented in http://www.mail-archive.com/xfree86@xfree86.org/msg00961.html by Hui. The MEM_CNTL and CONFIG_MEMSIZE warnings do not appear in my XFree86.0.log (attached) anymore, but I still get the same symptoms: black screen, dead keyboard, machine locks up completely if I attempt a shutdown via ssh. I have confirmed (again) that 4.2.99.3 works perfectly on the exact same configuration. MEM_CNTL problem shouldn't cause machine to lock up. To narrow down your problem, as Michel suggested, can you disable DRI to see if the lockup still happens? Hui Thanks, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
On Sun, Jan 26, 2003 at 01:23:47PM -0800, hy0 wrote: On Sun, Jan 26, 2003 at 02:50:22PM +0100, Michel Dänzer wrote: On Sun, 2003-01-26 at 03:36, Charl P. Botha wrote: I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. 4.2.99.3 works perfectly on the *exact* same configuration. I've attached my XFree86.0.log although it seems to be normal. [...] (WW) RADEON(0): Restoring MEM_CNTL (), setting to 2d002d01 (WW) RADEON(0): Restoring CONFIG_MEMSIZE (0400), setting to 0400 Have you been following the discussion about this code? Do any of the workarounds suggested in that thread (about '7200 support') help? Thanks for pointing this out Michel. I just tried the workaround on 4.2.99.4 as documented in http://www.mail-archive.com/xfree86@xfree86.org/msg00961.html by Hui. The MEM_CNTL and CONFIG_MEMSIZE warnings do not appear in my XFree86.0.log (attached) anymore, but I still get the same symptoms: black screen, dead keyboard, machine locks up completely if I attempt a shutdown via ssh. I have confirmed (again) that 4.2.99.3 works perfectly on the exact same configuration. MEM_CNTL problem shouldn't cause machine to lock up. To narrow down your problem, as Michel suggested, can you disable DRI to see if the lockup still happens? I did try with DRI disabled. In that case, X still starts up with a blank screen and a locked keyboard, but at least I can ssh in to the laptop and kill X and/or shutdown the machine. The text display is never recovered. I have attached the log of X running with DRI disabled. Thanks, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.4 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 20 January 2003 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.7-10custom i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Jan 26 20:00:31 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout DefaultLayout (**) |--Screen Default Screen (0) (**) | |--Monitor Clevo 15in 1400x1050 (**) | |--Device ATI Radeon 7500 Mobility (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device Synaptics (GPM) (**) |--Input Device USB Mouse (**) FontPath set to /usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/TTF (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80b4, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1558,5600 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1558,5600 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip
[XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. 4.2.99.3 works perfectly on the *exact* same configuration. I've attached my XFree86.0.log although it seems to be normal. I am subscribed to [EMAIL PROTECTED] but not [EMAIL PROTECTED], so CCs in the case of the latter would be appreciated. Thanks, Charl -- charl p. botha http://cpbotha.net/ http://visualisation.tudelft.nl/ This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.99.4 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 20 January 2003 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.21-pre3 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Jan 26 03:27:38 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout DefaultLayout (**) |--Screen Default Screen (0) (**) | |--Monitor Clevo 15in 1400x1050 (**) | |--Device ATI Radeon 7500 Mobility (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc104 (**) XKB: model: pc104 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device Synaptics (GPM) (**) |--Input Device USB Mouse (**) FontPath set to /usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/TrueType,/usr/lib/X11/fonts/TTF (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.99.4, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8002383c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1558,5600 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1558,5600 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 1558,5600 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 1558,5600 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 1558,5600 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1558,5600 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 1558,5600 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57 card 1558,5600 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:04:0: chip 104c,8023 card 1558,5600 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:06:0: chip 10ec,8139 card 1558,5600 rev 10 class 02,00,00 hdr 00 (II) PCI: 02:07:0: chip 104c,ac50 card 4400, rev 01 class 06,07,00 hdr 02 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is
Re: [XFree86] 4.2.99.4 no display, locked keyboard (Radeon 7500 Mobility)
You said: I just built 4.2.99.4 from CVS on my Radeon 7500 Mobility laptop. Starting X yields a blank display and a locked keyboard. Attempting to kill X or shutdown the laptop via ssh results in a complete system lockup. I had a similar problem (same video card, 4.2.99.4 binary) that was caused by a mismatched radeon.o kernel module. I'm not sure if that's what's going wrong for you though. Building the module from the latest DRI CVS sources solved it, but there were other problems: 1. The new cursors don't work well with hardware cursor acceleration in the radeon driver. X would lock for a second or two any time the cursor had to change from a new-style Xcursor cursor (e.g. red arrow) to an old core cursor (e.g. edge resize arrows). Using option SWcursor true solves the problem at the expense of disabling hw cursor acceleration. 2. I was using KDM and after exiting X my machine would lock up as it tried to restart the login screen. I think that even without KDM I couldn't restart X after I started it once. I'm not positive about this though. Out of curiosity, since you also have a 7500 mobility, have you ever tried running it dual-head with an external monitor? I'm trying to make that happen and having problems: http://www.mail-archive.com/xfree86@xfree86.org/msg00947.html Cheers, -n8 -- -- Nathaniel Gray -- Caltech Computer Science -- -- Mojave Project -- http://mojave.cs.caltech.edu -- ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
