Re: [XFree86] XFree86.0.log
Problem is evident in bottom of log...you either have no mouse or the RH7 VM isn't able to produce one. Try fiddling around with gpm or sumthin and see if you can get mouse access. If that doesn't work, check your VMware settings and make sure that the VM can see the mouse. X is choking because it can't find a mouse...either the VM is screwed up or VMware isn't showing a mouse to the VM. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.0.log
- Original Message - From: Francesco Loiacono [EMAIL PROTECTED] To: xfree86@xfree86.org Sent: Monday, November 12, 2007 4:06 PM Subject: Fw: XFree86.0.log From R.H.7.2 installed ( migrated from phisical to virtual ) on vmware 3.xxx. Best reguards Francesco Loiacono - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, November 12, 2007 3:26 PM Subject: XFree86.0.log XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] Build Host: stripples.devel.redhat.com Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon Nov 12 15:17:27 2007 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor vmware (**) | |--Device VMware SVGA (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbLayout it (**) XKB: layout: it (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 15ad,1976 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card 15ad,1976 rev 08 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 15ad,1976 rev 01 class 01,01,8a hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 15ad,1976 rev 08 class 06,80,00 hdr 80 (II) PCI: 00:0f:0: chip 15ad,0405 card 15ad,0405 rev 00 class 03,00,00 hdr 00 (II) PCI: 00:10:0: chip 104b,1040 card 104b,1040 rev 01 class 01,00,00 hdr 00 (II) PCI: 00:11:0: chip 1022,2000 card 1022,2000 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x80 (VGA_EN is cleared) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:15:0) VMware PCI SVGA (FIFO) rev 0, Mem @ 0xf800/26, 0xf400/23, I/O @ 0x1400/4 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x (0x1) IX[B] [6] -1 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xf480 - 0xf480001f (0x20) MX[B] [1] -1 0xf400 - 0xf47f (0x80) MX[B](B) [2] -1 0xf800 - 0xfbff (0x400) MX[B](B) [3] -1 0x1080 - 0x10ff (0x80)
[XFree86] XFree86.0.log
Dear Sir / Madam We are running Mandrake 9.2 on this PC. We logout shutdown PC. During Power on, we cannot login via GUI. Please help ..cy XFree86.0.log Description: Binary data
[XFree86] XFree86.0.log from amd64 w/ATI RADEON AIW
___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.0.log ; unable to change screen resolution
Dear Friends, I am unable to change mine screen resolution to 1024*768 . I am having 17 inch monitor, sis530, 8 MB video Ram etc. One of you asked me to provide XFree86.0.log which i am providing . Please tell how to change screen resolution i have tried redhat-config-xfree86 and editing XF86Config etc. Please help me without resolution i am unable to work i can change resolution to 640 but not to 1024 from 800. Thanks. XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Nov 18 17:14:06 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0620 card , rev 02 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:01:0: chip 1039,0008 card , rev b3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 1039,0009 card 0001,0001 rev 00 class ff,00,00 hdr 80 (II) PCI: 00:01:2: chip 1039,7001 card , rev 11 class 0c,03,10 hdr 80 (II) PCI: 00:02:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 1516,0803 card 1516,0803 rev 00 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 (II) PCI: 00:0d:0: chip 1813,4000 card , rev 02 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6306 card 1039,6306 rev 2a class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xd000 - 0xdfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdb80 - 0xdb8f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xdb00 - 0xdb7f (0x80) MX[B] (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS530 3D PCI/AGP rev 42, Mem @ 0xdb00/23, 0xdb80/16, I/O @ 0xd000/7 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 -
Re: [XFree86] XFree86.0.log ; unable to change screen resolution
A couple things. First I think you're using the wrong driver. There is an Sis driver for Sis chips, but you are using the VESA driver which is unaccelerated. The VESA driver is limited to modes that are listed in the VESA bios so it will be less flexible in mode selection than other drivers. To change from VESA to Sis, replace Driver vesa with Driver sis in the /etc/X11/XF86Config file. Second, there are 1024x768 modes in the VESA bios, so the VESA driver that you are using should be able to run at 1024x768. The reason why it doesn't is because according to the monitor specs, the monitor isn't capable of it. Are these the values you have for HorizSync and VertRefresh in the XF86Config?: (II) VESA(0): Monitor0: Using hsync range of 31.50-37.90 kHz (II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz Even a lowly 1024x768 mode running at only 60 Hz will have a horizontal sync of about 47 kHz, which exceeds the range specified for the monitor. The server reported this... *(II) VESA(0): Not using built-in mode 1024x768 (hsync out of range) Mode: 117 (1024x768) You should double-check your monitor specs. If 37.9 kHz is really the maximum you wouldn't be able to do 1024x768 without using an ugly interlaced mode. I would expect a 17 monitor would not have such a low maximum hsync. Mark. On Thu, 18 Nov 2004, Abhihsek jain wrote: Dear Friends, I am unable to change mine screen resolution to 1024*768 . I am having 17 inch monitor, sis530, 8 MB video Ram etc. One of you asked me to provide XFree86.0.log which i am providing . Please tell how to change screen resolution i have tried redhat-config-xfree86 and editing XF86Config etc. Please help me without resolution i am unable to work i can change resolution to 640 but not to 1024 from 800. Thanks. XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Nov 18 17:14:06 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8070, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0620 card , rev 02 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:01:0: chip 1039,0008 card , rev b3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 1039,0009 card 0001,0001 rev 00 class ff,00,00 hdr 80 (II) PCI: 00:01:2: chip 1039,7001 card , rev 11 class 0c,03,10 hdr 80 (II) PCI: 00:02:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 1516,0803 card 1516,0803 rev 00 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 (II) PCI: 00:0d:0: chip 1813,4000 card , rev 02 class 07,80,00 hdr 00 (II) PCI: 00:0f:0: chip
Re: [XFree86] XFree86.0.log
I found the solution: my /tmp directory had two big files and when I deleted them everything was OK --- Mark Vojkovich [EMAIL PROTECTED] wrote: There were no errors in the log file so I assume that means there's nothing wrong with the server. It sounds more like a problem with the window manager. Can you run XFree86 by itself? Ie. just run XFree86. CtrlAltBackspace will quit it. If you can do that, then the server itself is running fine. Mark. On Thu, 30 Sep 2004, Zeljko Djuricic wrote: When I try to start machine in GUI mode (level 5), my screen blinks few times and then crashes (then I see prompt). If I try to run X from console I get blank screen with mouse pointer. I also tried redhat-config-xfree86 --reconfig but got: xconf.py: Fatal IO error 2 (Connection rejec by peer) on X server :17.0.. I send you my config file __ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
When I try to start machine in GUI mode (level 5), my screen blinks few times and then crashes (then I see prompt). If I try to run X from console I get blank screen with mouse pointer. I also tried redhat-config-xfree86 --reconfig but got: xconf.py: Fatal IO error 2 (Connection rejec by peer) on X server :17.0.. I send you my config file __ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail XF86Config Description: XF86Config
Re: [XFree86] XFree86.0.log
Sorry, message is Conncetion reset by peer __ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] XFree86.0.log
Level 5 gets you straight into X at startup. Because your X does not work properly (yet) that's why it crashes to console. Startup in console mode (level 3) until you get your X running properly and then look at this link on how to get xdm going so that you can have a graphical logon. http://www.linuxgazette.com/issue43/nielsen.xdm.html Having a 'X' cursor means the Xserver is running. It's just that you don't have a windows manager running. The attached xinitrc file should be placed in tour /etc/X11/xinit/ directory. When you run startx it will now launch the TWM window manager, give you a clock and a terminal window. If you want other windows managers (KDE Gnome etc) try looking on their websites for advice on getting them running. Kevin email: [EMAIL PROTECTED] Tel: +44 (0)118 971 5032 -Original Message- From: Zeljko Djuricic [mailto:[EMAIL PROTECTED] Sent: 30 September 2004 08:27 To: [EMAIL PROTECTED] Subject: Re: [XFree86] XFree86.0.log When I try to start machine in GUI mode (level 5), my screen blinks few times and then crashes (then I see prompt). If I try to run X from console I get blank screen with mouse pointer. I also tried redhat-config-xfree86 --reconfig but got: xconf.py: Fatal IO error 2 (Connection rejec by peer) on X server :17.0.. I send you my config file __ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail xinitrc Description: Binary data
RE: [XFree86] XFree86.0.log
I reinstalled KDE from CD but nothing happened, so it must be windows manager. What is its package name, i.e. how to reinstall it? Or how to check is it running? thx very much __ Do you Yahoo!? Y! Messenger - Communicate in real time. Download now. http://messenger.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] XFree86.0.log
At this point my knowledge runs out. I've never had to configure a KDE system. I use X on a very small embedded system so don't have the space for KDE. This link http://developer.kde.org/documentation/books/kde-2.0-development/ch01lev1sec 5.html is to the KDE website which tell you how to install KDE. It also gives you the chance to download the latest version (if you want). Best of luck. Kevin email: [EMAIL PROTECTED] Tel: +44 (0)118 971 5032 -Original Message- From: Zeljko Djuricic [mailto:[EMAIL PROTECTED] Sent: 30 September 2004 12:29 To: [EMAIL PROTECTED] Subject: RE: [XFree86] XFree86.0.log I reinstalled KDE from CD but nothing happened, so it must be windows manager. What is its package name, i.e. how to reinstall it? Or how to check is it running? thx very much __ Do you Yahoo!? Y! Messenger - Communicate in real time. Download now. http://messenger.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
There were no errors in the log file so I assume that means there's nothing wrong with the server. It sounds more like a problem with the window manager. Can you run XFree86 by itself? Ie. just run XFree86. CtrlAltBackspace will quit it. If you can do that, then the server itself is running fine. Mark. On Thu, 30 Sep 2004, Zeljko Djuricic wrote: When I try to start machine in GUI mode (level 5), my screen blinks few times and then crashes (then I see prompt). If I try to run X from console I get blank screen with mouse pointer. I also tried redhat-config-xfree86 --reconfig but got: xconf.py: Fatal IO error 2 (Connection rejec by peer) on X server :17.0.. I send you my config file __ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] XFree86.0.log
My problem is I can't get to F7 screen when I boot up my linux 7.3 server. Regards, Callisto Mupfunye Technical Manager Micromart Zimbabwe Tel: 263-4-744643/587/628/523/530 Fax: 263-4-744653 Mobile: 26391416867 Mobile2: 26391914732 Email 1- [EMAIL PROTECTED] Email 2- [EMAIL PROTECTED] = This e-mail and any attachments hereto may contain information that is confidential and/or proprietory and is intended for the sole use of the addressee(s). If you are not the intended addressee or the person responsible for delivering it to the addressee, notify the sender and delete it immediately. Micromart Zimbabwe accepts no liability whatsoever for loss or damage resulting from the use of the information contained in this message. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benstead, Kevin Sent: Wednesday, September 29, 2004 1:13 PM To: [EMAIL PROTECTED] Subject: RE: [XFree86] XFree86.0.log And what is your problem? Your log file shows only one warning (about a sync rate setting being higher than the ratings of the monitor) and no errors. I can only assume you sent this log because you thought we might be interested. If you think there is a problem perhaps you would like to enlighten us. Kevin email: [EMAIL PROTECTED] Tel: +44 (0)118 971 5032 -Original Message- From: Zeljko Djuricic [mailto:[EMAIL PROTECTED] Sent: 29 September 2004 08:18 To: [EMAIL PROTECTED] Subject: [XFree86] XFree86.0.log XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Sep 28 22:58:34 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8058, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:0c:0: chip 1274,1371 card 1274,1371 rev 06 class 04,01,00 hdr 00 (II) PCI: 00:0d:0: chip 11c1,0440 card 11c1,0440 rev 01 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0181 card , rev c1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0
RE: [XFree86] XFree86.0.log
Callisto My reply was to Zeljko Djuricic who has sent his log file in without an description of the error. Please check that any replies you receive are actually about your problem. The mailing list sends copies of every problem and every reply to everyone on the mailing list. Don't just assume that a reply is an attempt to answer your problem. Anyway YOUR problem is to do with the lack of a font server running on your system. You have two options you can disable the requirement for a font server in your Xf86Config file and use the fonts directories instead OR you can make sure your font server is running before you attempt to start X. This FAQ (which Mark Vojkovich suggested you read earlier today) should tell you what you need to know. http://xfree86.linuxwiki.org/FAQ Kevin email: [EMAIL PROTECTED] Tel: +44 (0)118 971 5032 -Original Message- From: Callisto Mupfunye [mailto:[EMAIL PROTECTED] Sent: 29 September 2004 12:27 To: [EMAIL PROTECTED] Subject: RE: [XFree86] XFree86.0.log My problem is I can't get to F7 screen when I boot up my linux 7.3 server. Regards, Callisto Mupfunye Technical Manager Micromart Zimbabwe Tel: 263-4-744643/587/628/523/530 Fax: 263-4-744653 Mobile: 26391416867 Mobile2: 26391914732 Email 1- [EMAIL PROTECTED] Email 2- [EMAIL PROTECTED] = This e-mail and any attachments hereto may contain information that is confidential and/or proprietory and is intended for the sole use of the addressee(s). If you are not the intended addressee or the person responsible for delivering it to the addressee, notify the sender and delete it immediately. Micromart Zimbabwe accepts no liability whatsoever for loss or damage resulting from the use of the information contained in this message. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benstead, Kevin Sent: Wednesday, September 29, 2004 1:13 PM To: [EMAIL PROTECTED] Subject: RE: [XFree86] XFree86.0.log And what is your problem? Your log file shows only one warning (about a sync rate setting being higher than the ratings of the monitor) and no errors. I can only assume you sent this log because you thought we might be interested. If you think there is a problem perhaps you would like to enlighten us. Kevin email: [EMAIL PROTECTED] Tel: +44 (0)118 971 5032 -Original Message- From: Zeljko Djuricic [mailto:[EMAIL PROTECTED] Sent: 29 September 2004 08:18 To: [EMAIL PROTECTED] Subject: [XFree86] XFree86.0.log XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Sep 28 22:58:34 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8058, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03
Re: [XFree86] XFree86.0.log
There is no error in this logfile. It shows a properly working X-server. What is the problem? Mark. On Wed, 29 Sep 2004, Zeljko Djuricic wrote: XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Sep 28 22:58:34 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to /usr/X11R6/lib/X11/fonts/misc/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8058, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:0c:0: chip 1274,1371 card 1274,1371 rev 06 class 04,01,00 hdr 00 (II) PCI: 00:0d:0: chip 11c1,0440 card 11c1,0440 rev 01 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0181 card , rev c1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdc00 - 0xddff (0x200) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd000 - 0xd7ff (0x800) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 193, Mem @ 0xdc00/24, 0xd000/27 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd800 from 0xdbff to
RE: [XFree86] XFree86.0.log
Could not init font path element unix/:7100, removing from list! http://xfree86.linuxwiki.org/FAQErrorMessages#head-66113454d1ddc398ffb1e 7bce3fb588e7d5dff4d -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lambros Kastrinakis Sent: Friday, April 16, 2004 8:31 AM To: [EMAIL PROTECTED] Subject: [XFree86] XFree86.0.log I have installed Redhat 7.3 in VMware and I have taken this log. Have you a possibly reason after I have run VMware tools why I first open an X Window I never could open it again? Thank you in advance, Lambros ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
mascarasnake wrote: Howdy All, been trying to get X up on a BW G3 PowerMac (Yellow Dog Linux), but have had little luck. when I ran Xautoconf, I was given an XF86Config file that won't boot into X. My yaboot.conf file has a kernel arg of video=ofonly - don't know if that affects X or not? Basically, HELP!!! I'd like to be able to get into X - hopefully at a resolution that doesn't make me feel like I got my computer at Toys R Us (displaying thousands of colors would be sweet, too). The 2 immediately following replies to this will be my XF86Config file and XFree86.0.log thx in advance My monitor is a Samtron 96B with these specs from the web site: Resolution: Recommended 1,024 x [EMAIL PROTECTED] 1,280 x 1,[EMAIL PROTECTED] Maximum 1,600 x 1,[EMAIL PROTECTED] Pixel Frequency: Maximum135MHz Scanning Frequency:(Auto Scanning) Horizontal 30-85kHz Vertical50-160Hz Display Area: Normal352 x 264mm Maximum366 x 275mm Microprocessor Factory Saving Mode8 modes User Saving Mode8 modes Compatibility: IBMVGA 3 Mode VESAErgo VGA 640 x [EMAIL PROTECTED], 75, 85Hz 800 x [EMAIL PROTECTED], 60, 72, 75, 85Hz 1024 x [EMAIL PROTECTED] , 60, 70, 72, 75, 85Hz 1280 x [EMAIL PROTECTED], 75Hz 1600 x [EMAIL PROTECTED] MAC640 x [EMAIL PROTECTED], 67Hz 832 x [EMAIL PROTECTED] 1024 x [EMAIL PROTECTED], 60 , 75Hz I've looked up the specs for my video card (from System Profiler): Display card Card type:display Card name:ATY,XCLAIMVRPro Card model:ATY,GT-C Card ROM #:113-43101-124 Card revision:92 Card vendor ID:1002 Ethernet address:not applicable and from ATI's site: Display Resolution Vertical Refresh Maximum Colors 4MB Maximum Colors 6MB/8MB 512x384 70 millions millions 640x480 60,67,72,75,85,90,100,120 millions millions 640x870 75 millions millions 800x600 56,60,72,75,85,90,100,120 millions millions 832x624 75 millions millions 1024x768 60,70,75,85,90 millions millions 1024x768 100,120 millions millions 1152x870 75 millions millions Ca -- It's what you make it, man Takes time. A little bit A little bit more The Minutemen [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
XFree86 Version 4.3.0 (Yellow Dog Linux release: 4.3.0-2.1e) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.22-1asmp ppc [ELF] Build Date: 29 August 2003 Build Host: skyfox.terraplex.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.22-2g ([EMAIL PROTECTED]) (gcc version 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a)) #1 Tue Dec 2 22:48:31 MST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Feb 2 16:44:13 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Card0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel macintosh (**) XKB: model: macintosh (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1057,0002 card , rev 40 class 06,00,00 hdr 00 (II) PCI: 00:0d:0: chip 1011,0026 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 01:00:0: chip 104c,8000 card 106b,001c rev 02 class 0c,00,00 hdr 00 (II) PCI: 01:01:0: chip 1095,0646 card 1095,0646 rev 07 class 01,01,8f hdr 00 (II) PCI: 01:02:0: chip 1002,4749 card 1002, rev 5c class 03,00,00 hdr 00 (II) PCI: 01:05:0: chip 106b,0017 card , rev 00 class ff,00,00 hdr 00 (II) PCI: 01:06:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -100x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -100x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:13:0), (0,1,1), BCTRL: 0x0306 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -100x1000 - 0x10ff (0x100) IX[B] [1] -100x1400 - 0x14ff (0x100) IX[B] [2] -100x1800 - 0x18ff (0x100) IX[B] [3] -100x1c00 - 0x1cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -100x8080 - 0x81ff (0x180) MX[B] (--) PCI:*(1:2:0) ATI Technologies Inc 3D Rage Pro rev 92, Mem @ 0x8100/24, 0x80881000/12, I/O @ 0x1400/8, BIOS @ 0x808c/17 (II) Addressable bus resource ranges are [0] -100x - 0x (0x0) MX[B] [1] -100x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -100x - 0x (0x1) MX[B] [1] -100x - 0x (0x1) MX[B] [2] -100x - 0x (0x1) IX[B] [3] -100x - 0x (0x1) IX[B] (II) Active PCI resource ranges: [0] -100x8088 - 0x80880fff (0x1000) MX[B] [1] -100x8080 - 0x8087 (0x8) MX[B] [2] -100x808c - 0x808d (0x2) MX[B](B) [3] -100x80881000 - 0x80881fff (0x1000) MX[B](B) [4] -100x8100 - 0x81ff (0x100) MX[B](B) [5] -100x1050 - 0x105f (0x10) IX[B] [6] -100x1060 - 0x1063 (0x4) IX[B] [7] -100x1070 - 0x1077 (0x8) IX[B] [8] -100x1080 - 0x1083 (0x4) IX[B] [9] -100x1090 - 0x1097 (0x8) IX[B] [10] -100x1400 - 0x14ff (0x100) IX[B](B) (II) Inactive PCI resource ranges: [0] -100x808a - 0x808a (0x1) MX[B] [1] -100x808b - 0x808b (0x1) MX[B] [2] -100x80882000 - 0x80882fff (0x1000) MX[B] (II) Active PCI
[XFree86] XFree86.0.log
dear [EMAIL PROTECTED] (B (BI use the note PC "PCG-GR9/K" made by SONY. (BPlease tell me how to edit XF86Config. (B (BThanks best wishes, (BNobuyuki Okazaki. (B2004-2-3 XFree86.0.log Description: Binary data
[XFree86] XFree86.0.log
Hi there Just unable to log in to my Red Hat box. It gets to the area where it wants to start the GUI but just starts looping. I was able to get this log file by ssh into the busted machine and running init 3 Joshua Beaman[EMAIL PROTECTED]Ph: 02 43656543 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.566 / Virus Database: 357 - Release Date: 22/01/2004 XFree86.0.log Description: Binary data
Re: [XFree86] XFree86.0.log
Your fonts are broken: Could not init font path element unix/:7100, removing from list! Fatal server error: could not open default font 'fixed' Around Redhat 8, they stopped hard-coding font paths into the XF86Config file and use xfs (X font server). Make sure it runs at bootup (did you turn it off accidentally?). You should see a symlink here: lrwxrwxrwx1 root root 13 Apr 26 2003 /etc/rc.d/rc5.d/S90xfs - ../init.d/xfs If you are in runlevel 5, ssh in and try this: /etc/rc.d/init.d/xfs status to see if it's running... if not, change 'status' to 'start' and see if it goes. If it was off but started, make it go on bootup by make the link (or run redhat-config-services) to make it for you. That should be enough to get you going. -Cory On Tue, 27 Jan 2004, Josh Beaman wrote: Hi there Just unable to log in to my Red Hat box. It gets to the area where it wants to start the GUI but just starts looping. I was able to get this log file by ssh into the busted machine and running init 3 Joshua Beaman [EMAIL PROTECTED] Ph: 02 43656543 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.566 / Virus Database: 357 - Release Date: 22/01/2004 -- * * The prime directive of Linux: * * - learn what you don't know,* * - teach what you do.* * (Just my 20 USm$) * * ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
It appears to me that your mouse is misconfigured. You have specified a serial mouse (really? you have a serial mouse?) yet the serial port specified does not exist. Mark. On Fri, 23 Jan 2004, georgie kurien wrote: - Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.0.log
I have had problems in my graphical interface. I use Window Maker and the problem have occured when I open the program NetBeans 3.3.1 (IDE for Java). Simply my graphical interface abort. I am sending the file XFree86.0.log to you. Thanks. Alessandro Badin. Brasil. XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 01 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Nov 15 08:33:31 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor My Monitor (**) | |--Device VESA Framebuffer (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/100dpi/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/100dpi/). (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/100dpi/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/100dpi/). (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/cyrillic/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/cyrillic/). (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7194 card 1179,0001 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:04:0: chip 1023,9525 card 1179,0002 rev 49 class 03,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7198 card , rev 01 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7199 card , rev 00 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,719a card , rev 00 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,719b card , rev 00 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 1179,0d01 card 1179,0001 rev 00 class 0d,00,00 hdr 00 (II) PCI: 00:0b:0: chip 1179,0617 card 4000, rev 20 class 06,07,00 hdr 82 (II) PCI: 00:0c:0: chip 125d,1978 card 1179,0001 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0d:0: chip 11c1,0441 card 1179,0001 rev 01 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,20), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 20: bridge is at (0:11:0), (0,20,20), BCTRL: 0x0580 (VGA_EN is cleared) (II) Bus 20 I/O range: [0] -1 0 0x4000 - 0x40ff (0x100) IX[B] [1] -1 0 0x4400 - 0x44ff (0x100) IX[B] (II) Bus 20 non-prefetchable memory range: [0] -1 0 0x1080 - 0x10bf (0x40) MX[B] (II) Bus 20 prefetchable memory range: [0] -1 0 0x1040 - 0x107f (0x40) MX[B] (--) PCI:*(0:4:0) Trident Microsystems Cyber 9525 rev 73, Mem @ 0xff40/22, 0xff3e/17, 0xfec0/22 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource
[XFree86] XFree86.0.log made at first boot crash
Dear people, Hopefully you can give me a response on this. The crash is at my first install during first boot. The boot floppy made during install can't find the linux RedHat 8 installation, so I can't make any changes to drivers or whatever. I also have the Knoppix 3.2 cd, but it's not possible with knoppix to make changes to the XF86Config file. Below I copied the XFree86.0.log, I hope you can give me advice on this. Sincerely, Henk. ==begin XFree86.0.log XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Sep 21 16:40:07 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device NVIDIA GeForce 4 (generic) (**) |--Input Device Mouse0 (**) |--Input Device Mouse1 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us_intl (**) XKB: layout: us_intl (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0a:0: chip 1274,5880 card 1274,8001 rev 04 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 1000,0001 card , rev 12 class 01,00,00 hdr 00 (II) PCI: 00:0c:0: chip 10ec,8029 card , rev 00 class 02,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3147 card 1106, rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0171 card , rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xe400 - 0xe5ff (0x200) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xd000 - 0xdfff (0x1000) MX[B] (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) NVidia 0x0171 rev 163, Mem @ 0xe400/24, 0xd000/27, 0xd800/19 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x -
Re: [XFree86] XFree86.0.log made at first boot crash
On Sun, Sep 21, 2003 at 06:41:23PM +0200, Henk wrote: Hopefully you can give me a response on this. The crash is at my first install during first boot. The boot floppy made during install can't find the linux RedHat 8 installation, so I can't make any changes to drivers or you should make a new boot floppy when you fix all this. whatever. I also have the Knoppix 3.2 cd, but it's not possible with knoppix to make changes to the XF86Config file. Below I copied the yes it can, try mount -oremount,rw /dev/hda1 or whatever your partitions is, the knoppix defaults to mounting read only, see /etc/fstab for the mount options it uses. XFree86.0.log, I hope you can give me advice on this. you don't want x to startup at boot if you are working on x, edit the /etc/inittab file so the line that looks like this, has a 3 (not 5) in it. (mine is a different distro so might be slightly different) id:3:initdefault: also you should be able to specify runlevel 3 (no x) at the bootup, if I recall grub: edit the boot options (e), select the line that specifies a kernel, edit (e), add a 3 at the end, end edit (esc), then boot (b). // George -- GEORGE GEORGALIS, System Admin/Architectcell: 646-331-2027IXOYE Security Services, Web, Mail,mailto:[EMAIL PROTECTED] Multimedia, DB, DNS and Metrics. http://www.galis.org/george ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log made at first boot crash
On Sun, 21 Sep 2003, Henk wrote: Dear people, Hopefully you can give me a response on this. The crash is at my first install during first boot. The boot floppy made during install can't find the linux RedHat 8 installation, so I can't make any changes to drivers or whatever. I also have the Knoppix 3.2 cd, but it's not possible with knoppix to make changes to the XF86Config file. Below I copied the XFree86.0.log, I hope you can give me advice on this. Sincerely, Henk. This card (GeForce4 MX) works with the nv driver that comes with XFree86 4.3. I can't say for sure if it's possible to get it to work any other way. It *might* work with the nv driver that comes with XFree86 4.2 (your version) if you have one of the older GeForce4 MX cards. But, at a minimum you're going to need to modify the XF86Config file. Note, that root can start the server with an alternate XF86Config file from the command line. eg.: startx -- -xf86config /root/XF86Config.new Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.0.log
Sir, I m using linux7.1 on sis650 chipset. I m not able to configure my graphics. Plz help me to run Xwindows system on my linux7.1 with sis650_740 graphics card. I m sending the XFree86.0.log. Waiting for ur helpful reply. Thanx and regards... Sanju Kumar *** XFree86 Version 4.0.3 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 March 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.17-8smp i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Wed Oct 9 13:21:50 2002 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout XFree86 Configured (**) |--Screen Screen0 (0) (**) | |--Monitor SyncMaster (**) | |--Device My Video Card (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbLayout us (**) XKB: layout: us (**) FontPath set to unix/:7100 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.0.3, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.0.3, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0650 card 1019,0a44 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0008 card , rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:2: chip 1039,7001 card 1019,0a44 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1019,0a44 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1019,0a44 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1019,0a44 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1039,6325 card 1019,0a44 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.0.3, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xed00 - 0xed0f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xe000 - 0xe7ff (0x800) MX[B] (II) Bus -1: bridge is at (0:2:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) SiS unknown chipset (0x6325) rev 0, Mem @ 0xe000/27, 0xed00/17, I/O @ 0xc000/7 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e
[XFree86] XFree86.0.log
Fellow Gurus, I am having issues with getting any information on the web about what my problems maybe in concerns to getting my x server to start up. I have tried a couple differnt configurations and a couple different pieces of hardware. I have also tried to disable everything and remove all unneeded hardware from the machine and reinstalled each time I changed something. I am at a loss. I have provided the log file and a list of configurations as far as hardware goes. Could you please maybe give me a bit of direction in solving this. Motherboard: MSI K7T-Turbo2 (MSI-6330 version5: bios version 3.5) Video Card: GeForce2 MX 32MB Harddrive: Western Digital 20GB RAM: 512MB CPU: AMD 2000+ XP Thank you for your time and looking forward to anything that you may be able to provide. Beriah Dutcher [EMAIL PROTECTED] XFree86.0.log XFree86.0.log Description: Binary data
Re: [XFree86] XFree86.0.log
Security on your system is too high to run the X-Window system. Root isn't able to open /dev/mem, etc... I don't know much about the BSDs so I don't know the exact fix, but this is a common problem on those operating systems. Mark. On Fri, 27 Jun 2003, Bee Dutcher wrote: Fellow Gurus, I am having issues with getting any information on the web about what my problems maybe in concerns to getting my x server to start up. I have tried a couple differnt configurations and a couple different pieces of hardware. I have also tried to disable everything and remove all unneeded hardware from the machine and reinstalled each time I changed something. I am at a loss. I have provided the log file and a list of configurations as far as hardware goes. Could you please maybe give me a bit of direction in solving this. Motherboard: MSI K7T-Turbo2 (MSI-6330 version5: bios version 3.5) Video Card: GeForce2 MX 32MB Harddrive: Western Digital 20GB RAM: 512MB CPU: AMD 2000+ XP Thank you for your time and looking forward to anything that you may be able to provide. Beriah Dutcher [EMAIL PROTECTED] XFree86.0.log ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.0.log
XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Mon Nov 25 13:29:50 2002 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor IIYAMA Vision Master Pro 413 (**) | |--Device S3 Trio64V2/DX (generic) (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 500 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel itouch (**) XKB: model: itouch (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:08:0: chip 5333,8901 card 5333,8901 rev 16 class 03,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3147 card 1106,3147 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4511 rev 40 class 04,01,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x04 (VGA_EN is cleared) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:8:0) S3 Trio64V2/DX or /GX rev 22, Mem @ 0xe400/26 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x (0x1) IX[B] [6] -1 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe000 - 0xe3ff
[XFree86] XFree86.0.log
Hello. I just downloaded and installed linux red hat 8.0. It can't start the X server. I have tried running XF86config and I've also downloaded the last version of xfree86 (4.2.1) Still i have the same problems. This is happening at startup: * The screen turns black for a second (4 times) * Then it tells med that it cannot start the X server. It's not able to set it up for me either... I have a LG99 monitor and a ATI Radeon 8500 graphical card. The log from /var/log is attached... Hope you can help me! -- Rikard Bø XFree86.0.log Description: Binary data
