Re: [XFree86] Linux drivers for SGI 1600SW flat panel
On Tue, 25 Feb 2003, sean fatourchi wrote: Hello, I am new to Linux. I was wondering if any of you good people has successfully configured Number Nine Revolution 4 video card to work with SliconGraphics 1600sw flat panel lcd ? If so I would appreciate it if you can tell me how. This is from the config file on a machine I have with that hardware: --- Section Monitor Identifier SG panel VendorName Silicon Graphics ModelName1600SW HorizSync 27.0-96.0 # kHz VertRefresh 29-31, 50.0-80.0, 119-124 # Hz Option DPMS # From http://www.xfree86.org/3.3.6/I1284.html Modeline 1600x1024d32 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 7 +Hsync +Vsync Modeline 1600x1024d16 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 5 +Hsync +Vsync Modeline 1600x1024d08 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 1 +Hsync +Vsync Modeline 800x512d32 54.375 800 800 840 848 512 512 514 515 HSkew 7 DoubleScan +Hsync +Vsync Modeline 800x512d16 54.375 800 800 840 848 512 512 514 515 HSkew 5 DoubleScan +Hsync +Vsync Modeline 800x512d08 54.375 800 800 840 848 512 512 514 515 HSkew 1 DoubleScan +Hsync +Vsync # 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz Modeline 1600x1024_60.00 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -HSync +Vsync Modeline 1600x2048d32i 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 Interlace +Hsync +Vsync Modeline 1600x2048d32 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 +Hsync +Vsync EndSection Section Device # Option Debug Identifier Card0 Driver i128 VendorName Number Nine BoardName Imagine 128 T2R4 # BusID PCI:2:0:0 EndSection Section Screen Identifier Screen0 Device Card0 MonitorSG panel DefaultColorDepth 24 SubSection Display Depth 24 Modes 1600x1024d32 800x512d32 EndSubSection EndSection --- -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Linux drivers for SGI 1600SW flat panel
Config file paths are listed in the /var/log/XFree86.0.log. eg: (==) Using config file: /etc/X11/XF86Config though it's often XF86Config-4 at that same location, but could be in a couple other places. Mark. On Tue, 25 Feb 2003, sean fatourchi wrote: Doctor, Thank you very much for the reply. Would you mind giving me the path to that configuration file. Sean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dr Andrew C Aitchison Sent: Tuesday, February 25, 2003 1:42 PM To: [EMAIL PROTECTED] Subject: Re: [XFree86] Linux drivers for SGI 1600SW flat panel On Tue, 25 Feb 2003, sean fatourchi wrote: Hello, I am new to Linux. I was wondering if any of you good people has successfully configured Number Nine Revolution 4 video card to work with SliconGraphics 1600sw flat panel lcd ? If so I would appreciate it if you can tell me how. This is from the config file on a machine I have with that hardware: --- Section Monitor Identifier SG panel VendorName Silicon Graphics ModelName1600SW HorizSync 27.0-96.0 # kHz VertRefresh 29-31, 50.0-80.0, 119-124 # Hz Option DPMS # From http://www.xfree86.org/3.3.6/I1284.html Modeline 1600x1024d32 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 7 +Hsync +Vsync Modeline 1600x1024d16 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 5 +Hsync +Vsync Modeline 1600x1024d08 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 1 +Hsync +Vsync Modeline 800x512d32 54.375 800 800 840 848 512 512 514 515 HSkew 7 DoubleScan +Hsync +Vsync Modeline 800x512d16 54.375 800 800 840 848 512 512 514 515 HSkew 5 DoubleScan +Hsync +Vsync Modeline 800x512d08 54.375 800 800 840 848 512 512 514 515 HSkew 1 DoubleScan +Hsync +Vsync # 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz Modeline 1600x1024_60.00 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -HSync +Vsync Modeline 1600x2048d32i 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 Interlace +Hsync +Vsync Modeline 1600x2048d32 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 +Hsync +Vsync EndSection Section Device # Option Debug Identifier Card0 Driver i128 VendorName Number Nine BoardName Imagine 128 T2R4 # BusID PCI:2:0:0 EndSection Section Screen Identifier Screen0 Device Card0 MonitorSG panel DefaultColorDepth 24 SubSection Display Depth 24 Modes 1600x1024d32 800x512d32 EndSubSection EndSection --- -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Linux drivers for SGI 1600SW flat panel
It would most likely be /etc/X11/XF86Config-4 (or just XF86Config). On Tue, 25 Feb 2003, sean fatourchi wrote: Doctor, Thank you very much for the reply. Would you mind giving me the path to that configuration file. Sean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dr Andrew C Aitchison Sent: Tuesday, February 25, 2003 1:42 PM To: [EMAIL PROTECTED] Subject: Re: [XFree86] Linux drivers for SGI 1600SW flat panel On Tue, 25 Feb 2003, sean fatourchi wrote: Hello, I am new to Linux. I was wondering if any of you good people has successfully configured Number Nine Revolution 4 video card to work with SliconGraphics 1600sw flat panel lcd ? If so I would appreciate it if you can tell me how. This is from the config file on a machine I have with that hardware: --- Section Monitor Identifier SG panel VendorName Silicon Graphics ModelName1600SW HorizSync 27.0-96.0 # kHz VertRefresh 29-31, 50.0-80.0, 119-124 # Hz Option DPMS # From http://www.xfree86.org/3.3.6/I1284.html Modeline 1600x1024d32 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 7 +Hsync +Vsync Modeline 1600x1024d16 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 5 +Hsync +Vsync Modeline 1600x1024d08 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 1 +Hsync +Vsync Modeline 800x512d32 54.375 800 800 840 848 512 512 514 515 HSkew 7 DoubleScan +Hsync +Vsync Modeline 800x512d16 54.375 800 800 840 848 512 512 514 515 HSkew 5 DoubleScan +Hsync +Vsync Modeline 800x512d08 54.375 800 800 840 848 512 512 514 515 HSkew 1 DoubleScan +Hsync +Vsync # 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz Modeline 1600x1024_60.00 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -HSync +Vsync Modeline 1600x2048d32i 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 Interlace +Hsync +Vsync Modeline 1600x2048d32 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 +Hsync +Vsync EndSection Section Device # Option Debug Identifier Card0 Driver i128 VendorName Number Nine BoardName Imagine 128 T2R4 # BusID PCI:2:0:0 EndSection Section Screen Identifier Screen0 Device Card0 MonitorSG panel DefaultColorDepth 24 SubSection Display Depth 24 Modes 1600x1024d32 800x512d32 EndSubSection EndSection --- -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Linux drivers for SGI 1600SW flat panel
If you are using Xfree86 version 4.x, the configuration file should be in /etc/X11/ (that's where it's been for me in Redhat and Debian with XF86v4). It may be called XF86Config, XF86Config-4, or some other permutation of similar effect. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sean fatourchi Sent: Tuesday, February 25, 2003 5:14 PM To: [EMAIL PROTECTED] Subject: RE: [XFree86] Linux drivers for SGI 1600SW flat panel Doctor, Thank you very much for the reply. Would you mind giving me the path to that configuration file. Sean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dr Andrew C Aitchison Sent: Tuesday, February 25, 2003 1:42 PM To: [EMAIL PROTECTED] Subject: Re: [XFree86] Linux drivers for SGI 1600SW flat panel On Tue, 25 Feb 2003, sean fatourchi wrote: Hello, I am new to Linux. I was wondering if any of you good people has successfully configured Number Nine Revolution 4 video card to work with SliconGraphics 1600sw flat panel lcd ? If so I would appreciate it if you can tell me how. This is from the config file on a machine I have with that hardware: --- Section Monitor Identifier SG panel VendorName Silicon Graphics ModelName1600SW HorizSync 27.0-96.0 # kHz VertRefresh 29-31, 50.0-80.0, 119-124 # Hz Option DPMS # From http://www.xfree86.org/3.3.6/I1284.html Modeline 1600x1024d32 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 7 +Hsync +Vsync Modeline 1600x1024d16 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 5 +Hsync +Vsync Modeline 1600x1024d08 103.125 1600 1600 1656 1664 1024 1024 1029 1030 HSkew 1 +Hsync +Vsync Modeline 800x512d32 54.375 800 800 840 848 512 512 514 515 HSkew 7 DoubleScan +Hsync +Vsync Modeline 800x512d16 54.375 800 800 840 848 512 512 514 515 HSkew 5 DoubleScan +Hsync +Vsync Modeline 800x512d08 54.375 800 800 840 848 512 512 514 515 HSkew 1 DoubleScan +Hsync +Vsync # 1600x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 136.36 MHz Modeline 1600x1024_60.00 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -HSync +Vsync Modeline 1600x2048d32i 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 Interlace +Hsync +Vsync Modeline 1600x2048d32 103.125 1600 1600 1656 1664 2048 2048 2058 2059 HSkew 7 +Hsync +Vsync EndSection Section Device # Option Debug Identifier Card0 Driver i128 VendorName Number Nine BoardName Imagine 128 T2R4 # BusID PCI:2:0:0 EndSection Section Screen Identifier Screen0 Device Card0 MonitorSG panel DefaultColorDepth 24 SubSection Display Depth 24 Modes 1600x1024d32 800x512d32 EndSubSection EndSection --- -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86