[Xpert]How to stop a laptop going into standby when i close the lid?
Hello, not sure if this got though, i could not find it on the mailing list log. Has anyone any thoughts on how to get this working please? JG Original Message Subject: How to stop a laptop going into standby when i close the lid? Date: Mon, 13 May 2002 17:11:59 +0900 From: J. Grant [EMAIL PROTECTED] To: xpert [EMAIL PROTECTED] Hi, Could someone tell me how can I stop a laptop going into standby when i close the lid? I checked apm but could not find this option that triggers the whole process, could someone point me to the file that contains this ON_LID_CLOSE=/usr/bin/apm suspend now or similar command please? I can not find it in the bios. Another OS can disable it... JG I have tired the following server flags section Option NoPM boolean Monitor section Option DPMS off and Section Device Option power_saver All with no luck, it still 'Saves to RAM' In the bios i had it on custom with each one disabled, now i have it just on all disabled instead of custom. occasionall it does not go off, which is odd, but every time while i have been testing today it has. I dont want to cut off the switch and then leave the screen light on, i would like to just close the lid for carrying around the office, but it goes into suspend each time tho.. --- Laptop Adagio (38W2) Same as DELL Inspiron 7500 Chipset: ATI Rage 128 Mobility LF (AGP) (ChipID = 0x4c46) ATI Mobility 128 AGP 2X (English) ASIC Mobility 128 ASIC ID 4c46 Bios 004.039.064.023 Date 31/8/2000 Tuner Type: Philips FI1236 MK1 NTSC M/C Tuner Type: BT819 Linear framebuffer at 0xf800 MMIO registers at 0xf410 VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1) SDRAM Using flat panel for display Panel size: 1400x1050 Panel ID: IBM ITSX93 Panel Type: Color, Single, TFT Panel Interface: LVDS PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500 Resolutions supported 1600 x 1200 but not all visible. 1400 x 1050 full 1280 x 1024 1024 x 768 all 32 or 16 bpp or 256 no 24bit mode XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon May 13 16:47:52 2002 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout 2 (**) |--Screen screen1 (0) (**) | |--Monitor Generic|Generic Monitor, 1600x1200 @ 70 Hz (**) | |--Device ATI Rage 128 Mobility (**) |--Input Device mouse2 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 250 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout gb (**) XKB: layout: gb (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:-1 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option NoPM 1 (--) using VT number 7 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 104c,ac51 card , rev 00 class 06,07,00 hdr 82 (II) PCI: 00:04:1: chip 104c,ac51 card , rev 00 class 06,07,00 hdr 82 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 03 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 125d,1978 card 14c0,0011 rev 10 class 04,01,00 hdr
[Xpert]How to stop a laptop going into standby when i close the lid?
Hi, Could someone tell me how can I stop a laptop going into standby when i close the lid? I checked apm but could not find this option that triggers the whole process, could someone point me to the file that contains this ON_LID_CLOSE=/usr/bin/apm suspend now or similar command please? I can not find it in the bios. Another OS can disable it... JG I have tired the following server flags section Option NoPM boolean Monitor section Option DPMS off and Section Device Option power_saver All with no luck, it still 'Saves to RAM' In the bios i had it on custom with each one disabled, now i have it just on all disabled instead of custom. occasionall it does not go off, which is odd, but every time while i have been testing today it has. I dont want to cut off the switch and then leave the screen light on, i would like to just close the lid for carrying around the office, but it goes into suspend each time tho.. --- Laptop Adagio (38W2) Same as DELL Inspiron 7500 Chipset: ATI Rage 128 Mobility LF (AGP) (ChipID = 0x4c46) ATI Mobility 128 AGP 2X (English) ASIC Mobility 128 ASIC ID 4c46 Bios 004.039.064.023 Date 31/8/2000 Tuner Type: Philips FI1236 MK1 NTSC M/C Tuner Type: BT819 Linear framebuffer at 0xf800 MMIO registers at 0xf410 VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1) SDRAM Using flat panel for display Panel size: 1400x1050 Panel ID: IBM ITSX93 Panel Type: Color, Single, TFT Panel Interface: LVDS PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500 Resolutions supported 1600 x 1200 but not all visible. 1400 x 1050 full 1280 x 1024 1024 x 768 all 32 or 16 bpp or 256 no 24bit mode XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.8-5mdkenterprise i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Mon May 13 16:47:52 2002 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout 2 (**) |--Screen screen1 (0) (**) | |--Monitor Generic|Generic Monitor, 1600x1200 70 Hz (**) | |--Device ATI Rage 128 Mobility (**) |--Input Device mouse2 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 250 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout gb (**) XKB: layout: gb (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:-1 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option NoPM 1 (--) using VT number 7 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 104c,ac51 card , rev 00 class 06,07,00 hdr 82 (II) PCI: 00:04:1: chip 104c,ac51 card , rev 00 class 06,07,00 hdr 82 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 03 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 125d,1978 card 14c0,0011 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:10:0: chip 11c1,0450 card 144f,4005 rev 00 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c46 card 14c0,0011 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0, module version =
