Re: [Xpert]Radeon VE dualhead
You can try to use HorizSync 80 and VertRefresh 75 (be careful, check your monitor manual first) instead of HorizSync 64 and VertRefresh 60. Or you can simply try to remove HorizSync 64 and VertRefresh 60 lines from both of your Monitor sections, radeon driver will use the sync ranges from the EDID (this may not work for you if your monitors have multi separate sync settings). Your monitors seem to only support 1280x1024@75Hz. If you force it to 1280x1024@60Hz as you did, it may have the problem as you experienced. BTW, your monitors use analog input, you don't need Option CrtScreen lines. hy - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, February 19, 2002 11:42 AM Subject: Re: [Xpert]Radeon VE dualhead Here is the attachments I meant to include... -- Today's funny quote of the day: I have flabby thighs, but fortunately my stomach covers them. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Radeon VE dualhead
Actually, the monitors ideally want 1280x1024@60Hz and that's why I have the HorizSync and VertRefresh set the way I do (the monitor spec said that the monitors use those frequencies). However, I will try putting the valid ranges back for HS VS and see what that does. I know that it's something simple I'm missing... Later I tried the setup without the CrtScreen options, and there was no change, so I agree with you that they are not necessary. Do you have a XF86Config-4 file that works (with dualhead Radeon)? Thanx, John On Wed, Feb 20, 2002 at 11:33:35PM -0800, hy0 wrote: You can try to use HorizSync 80 and VertRefresh 75 (be careful, check your monitor manual first) instead of HorizSync 64 and VertRefresh 60. Or you can simply try to remove HorizSync 64 and VertRefresh 60 lines from both of your Monitor sections, radeon driver will use the sync ranges from the EDID (this may not work for you if your monitors have multi separate sync settings). Your monitors seem to only support 1280x1024@75Hz. If you force it to 1280x1024@60Hz as you did, it may have the problem as you experienced. BTW, your monitors use analog input, you don't need Option CrtScreen lines. hy - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, February 19, 2002 11:42 AM Subject: Re: [Xpert]Radeon VE dualhead Here is the attachments I meant to include... -- Today's funny quote of the day: I have flabby thighs, but fortunately my stomach covers them. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. -- Today's funny quote of the day: The advantage of exercising every day is that you die healthier. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Radeon VE dualhead
I have an ATI Radeon VE and I'm trying to setup dual monitors. I'm using the binaries from XFree86.org, version 4.2.0 on a Debian machine running kernel 2.4.18-pre9-ac3. Included is my XFree86Config-4 file and the log output. With this setup, I get one display working, but it is showing half of the desktop. This makes me think that X at least thinks the desktop is two monitors wide. The only problem is the second display is still blank (no sync). Anyone that would forward their XF86Config-4 file that works with the ATI Radeon VE card would be appreciated. Thanx, John -- Today's funny quote of the day: I have flabby thighs, but fortunately my stomach covers them. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Radeon VE dualhead
Here are the files I meant to attach... -- Today's funny quote of the day: I have flabby thighs, but fortunately my stomach covers them. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type man XF86Config-4 at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the ### BEGIN DEBCONF SECTION line above, and/or after the # ### END DEBCONF SECTION line below. Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/Speedo FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module LoadGLcore Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadpex5 Loadrecord Loadspeedo Loadtype1 Loadvbe Loadxie # SubSection extmod # Option omit xfree86-dga # EndSubSection EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option XkbRules xfree86 Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Mouse Driver mouse Option Device/dev/psaux Option Protocol ImPS/2 Option ZAxisMapping 4 5 EndSection Section Device Identifier Radeon0 Driver ati BusID PCI:1:0:0 Screen 0 # Option UseFBDev true Option DPMS on # VideoRam32768 Option CrtScreen EndSection Section Device Identifier Radeon1 Driver ati BusID PCI:1:0:0 Screen 1 # Option UseFBDev true Option DPMS on # VideoRam32768 Option CrtScreen EndSection Section Monitor Identifier LCD Monitor Left # HorizSync 31-80 # VertRefresh 56-76 HorizSync 64 VertRefresh 60 Option CrtScreen EndSection Section Monitor Identifier LCD Monitor Right # HorizSync 31-80 # VertRefresh 56-76 HorizSync 64 VertRefresh 60 Option CrtScreen EndSection Section Screen Identifier Right Screen Device Radeon0 Monitor LCD Monitor Right Option CrtScreen DefaultColorDepth 24 SubSection Display Depth 8 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 15 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 16 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 24 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 32 Modes 1280x1024 ViewPort0 0 EndSubSection EndSection Section Screen Identifier Left Screen Device Radeon1 Monitor LCD Monitor Left Option CrtScreen DefaultColorDepth 24 SubSection Display Depth
Re: [Xpert]Radeon VE dualhead
Here is the attachments I meant to include... -- Today's funny quote of the day: I have flabby thighs, but fortunately my stomach covers them. www.GCFL.net (The Good, Clean Funnies List): Good, clean funnies five times a week, FOR FREE no ads in the mailings! The information transmitted herein is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type man XF86Config-4 at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the ### BEGIN DEBCONF SECTION line above, and/or after the # ### END DEBCONF SECTION line below. Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/Speedo FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module LoadGLcore Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadpex5 Loadrecord Loadspeedo Loadtype1 Loadvbe Loadxie # SubSection extmod # Option omit xfree86-dga # EndSubSection EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option XkbRules xfree86 Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Mouse Driver mouse Option Device/dev/psaux Option Protocol ImPS/2 Option ZAxisMapping 4 5 EndSection Section Device Identifier Radeon0 Driver ati BusID PCI:1:0:0 Screen 0 # Option UseFBDev true Option DPMS on # VideoRam32768 Option CrtScreen EndSection Section Device Identifier Radeon1 Driver ati BusID PCI:1:0:0 Screen 1 # Option UseFBDev true Option DPMS on # VideoRam32768 Option CrtScreen EndSection Section Monitor Identifier LCD Monitor Left # HorizSync 31-80 # VertRefresh 56-76 HorizSync 64 VertRefresh 60 Option CrtScreen EndSection Section Monitor Identifier LCD Monitor Right # HorizSync 31-80 # VertRefresh 56-76 HorizSync 64 VertRefresh 60 Option CrtScreen EndSection Section Screen Identifier Right Screen Device Radeon0 Monitor LCD Monitor Right Option CrtScreen DefaultColorDepth 24 SubSection Display Depth 8 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 15 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 16 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 24 Modes 1280x1024 ViewPort0 0 EndSubSection SubSection Display Depth 32 Modes 1280x1024 ViewPort0 0 EndSubSection EndSection Section Screen Identifier Left Screen Device Radeon1 Monitor LCD Monitor Left Option CrtScreen DefaultColorDepth 24 SubSection Display Depth
