Hi,
Not new, but still true and interesting :
http://adsm.org/lists/html/Veritas-bu/2003-02/msg00499.html
--
Best regards / Cordialement / مع تحياتي
Erwann SIMON
- Mail original -
De: Chavdar Cholev chavdar.cho...@gmail.com
À: ADSM-L@VM.MARIST.EDU
Envoyé: Dimanche 13 Janvier 2013
You might want to check if Netbackup has a trial/demo version you can
download and install that might let you perform the restore.
Also, I believe Netbackup uses some form of tar to store data on tape.
Check out
Hi TSM-ers!
We have been using TSM on AIX for quite a while (since ADSM 2.1) and we
always used the Atape driver. In fact I always thought one had to use
the Atape driver, unless you use a drive which isn't supported by Atape,
in that case you should use the TSM device driver.
The 6.3
You will use Atape for the library control, but you didn't mention what drive
type you are using. Assuming it is an IBM drive, then you will use Atape for
that as well.
I have a quantum library with IBM drives, so I use the TSM driver for the
library control and Atape for the drives.
Hi,
I would say that you should do as you have always done : install atape for IBM
devices.
Message d'origine
De : Loon, EJ van - SPLXM eric-van.l...@klm.com
Date :
A : ADSM-L@VM.MARIST.EDU
Objet : [ADSM-L] TSM Device Driver
Hi TSM-ers!
We have been using TSM on
Have a LTO tape that was previously written to. It was outside the library so
we inserted it to do a reclaim process.
After it was inserted we attempted a checkin command but the results show no
volume found.
CHECKIN LIBVOLUME TSMLIBR SEARCH=YES VOLLIST=A00027L5 STATUS=PRIVATE
Did you check the tape in to the library and assign it to the correct pool?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim
Brown
Sent: Monday, January 14, 2013 11:06 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] checkin tape to tsm lto
Did you phiscally assign it to the library on the library?
Met vriendelijke groet,
Richard van Denzel
+31 (0)6 15 83 82 48
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Ballenger,
Craig
Verzonden: maandag 14 januari 2013 17:24
Aan:
Yes we assigned it to logical library_a which is the only library we have
All the other tapes in the library are assigned to library_a
Should I see the same list of tapes via the TS3310 web page for data cartridges
that
I see as a result of q libv tsmlibr
Some of the entries in the data
Hi
I have been asked to implement a solution for backup of Lotus Domino
Servers using TSM. At this moment in time, i am unsure if they will be
running this is on Windows, Unix or Linux.
I have done this previously and was intending to implement a similar
solution: Weekly full backups, daily
We are doing exactly what you said, except that we have phased out log
backups (too many issues with synchronizing between the daily/weekly/log
backups and orphaned logs and not enough time in the day - there are Domino
backups running all-the-time). Currently our Domino servers are Solaris,
but
I think it depends on your environment, your hardware, the size of your mail
servers.
The original use of Flashcopy manager (this is about the third name for the
product - it was originally something like TSM for hardware) was to
facilitate use of snapshots of volumes taken with IBM disk
Oh, and I should have clarified -
You are going to use TSM for Mail regardless.
It's just whether or not you have Flashcopy assisting it.
-Original Message-
From: Prather, Wanda
Sent: Monday, January 14, 2013 4:18 PM
To: 'ADSM: Dist Stor Manager'
Subject: RE: [ADSM-L] Backing Up Lotus
If this is indeed a hardware error , is there a way to bypass a particular slot
in the library
Thanks,
Tim Brown
Supervisor Computer Operations
Central Hudson Gas Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.commailto:tbr...@cenhud.com mailto:tbr...@cenhud.com
Phone:
Tim,
The info given by the library should match what q libvol shows. You maybe
should run an audit library to see it clears things up.
Bob.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim
Brown
Sent: Monday, January 14, 2013 11:20 AM
One slight clarification...
You can use FlashCopy Manager on Windows with any hardware.
You are not limited to IBM hardware.
Thanks,
Del
ADSM: Dist Stor Manager ADSM-L@vm.marist.edu wrote on 01/14/2013
04:19:11 PM:
From: Prather, Wanda
try to audit library with refresh=yes and checkl=barcode
On Tue, Jan 15, 2013 at 12:23 AM, Bob Levad ble...@winnebagoind.com wrote:
Tim,
The info given by the library should match what q libvol shows. You maybe
should run an audit library to see it clears things up.
Bob.
-Original
17 matches
Mail list logo
