TSM 4.1.4 running on AIX 4.3.3
Hi,
Attached to this server is a StorageTek L700 tape
library, after running flawlessly for over a year. I
have begun seeing problem tapes popping up here and
there. There is this one tape of which I could not
mount it for anything, the TSM just gave it up by
System: TSM 4.1.4 running on AIX 4.3.3
I have several tapes that TSM keeps switching the
ACCESS from 'READWRITE' to 'READONLY' because of media
fault. What do I need to do to replace these tapes?
Please advise.
TIA
__
Do you Yahoo!?
HotJobs -
Thank you for the info., Johnn..
--- Johnn D. Tan [EMAIL PROTECTED] wrote:
We just went from TSM Server 4.1.3 to 5.1.1.6
You do not need to stop at 4.2 along the way.
Here's the conceptual overview of what we did --
obviously, tailor it
for your environment:
1) stop TSM from doing
Hi
I have TSM 4.1.4 running on AIX 4.3.3. I like to
upgrade TSM from my current level to 5.x. Do I need
to upgrade it to 4.2 before I can go to 5.x?
Can anyone who has done the upgrade give me some
advices please?
Thank you in advance.
__
Do you
/,`.-'`'-. ;-;;,_
BJC Health Care|,4-
) )-,_. ,\ ( `'-'
St. Louis, Missouri
'---''(_/--' `-'\_)
Cat Pics: http://andyc.dyndns.org/animal.html
On Wed, 19 Jun 2002, Chuck Lam wrote:
Hi,
I have TSM 4.1.4 running off AIX 4.3.3. All my
TSM
Data(DB, LOGs
Hi,
I have an AIX client(4.3.3) backing up to a TSM server
running 4.1.4. I noticed the dsmsched.log the
dsmerror.log stopped recording since 2/13. The backup
is still going on everyday and the client have been
rebooted a few times since February.
Why the client's log files stopped recording
Hi,
I have TSM 4.1.4 running on AIX 4.3.3.
Whenever I created scripts running outside of TSM, I
needed to hardcode my admin account and its password
in within the TSM command to get it to run. Although
it is not a problem, because no one else has access to
this TSM server at this point. It
TSM 4.1.4 running in AIX 4.3.3
After I came back from the Memorial weekend, I noticed
a bunch of tapes with 'private' Status but blank
Last_Use when I did a 'q libv'. 'q vol volume_name'
on these tapes returned with 'NO MATCH'. There were
problems with one of the tape drives over that weekend
Hello,
TSM 4.1.4 running in AIX 4.3.3
If I want to search error and fail in 'q actlog',
is there any way I can put multiple searching strings
in one command, rather than one at a time?
TIA
__
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
Good morning,
TSM 4.1.4 running on AIX 4.3.3
I recently upgrade my StorageTek L700 tape library
slot capacity from 216 to 384. When I tried to add
tapes beyond the old storage space, I was getting
ANR8314E Library is full message. Does any one know
how to make TSM to recognize and use the new
Hi - List,
TSM 4.1.4 runs on AIX4.3.3.
I noticed the following when I do 'q libv' recently:
Three of the tapes were marked 'Private' under STATUS,
but were blank under LAST USE. Usually when a tape is
scratched, the LAST USE then becomes blank. A Private
tapes is associated with DATA under
Our TSM is 4.1.4 running on AIX 4.3.3
NT client is running 4.1.2
Our NT admin tried to restore files last week, but
found out the process took very long time, and
eventually he found out his NIC on that NT box
accumulating hugh number of CRC errors. He later
found out all his NICs on all other
vaulting of the backupsets you create, if
you are using that product
instead of DRM for vaulting.
-Original Message-
From: Chuck Lam [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 02, 2001 7:16 PM
To: [EMAIL PROTECTED]
Subject: Creating backupset for a client node on TSM
4.1
Hello-List,
Does anyone have experience creating 'backupsets' for
a client node on TSM 4.1? Because there are so many
small files on the Novell servers, I was asked to see
if we can perform a 'full' system backup on those
servers every two weeks in case we have to do a full
system restore. I
I installed TSM client 4.1 on a Sun box running SUNOS
5.7. When I typed 'dsm', it started up with the
following messages:
Warning: Cannot convert string KeyHome,_Key_Begin
to type VirtualBinding
Warning: Cannot convert string KeyF1,_Key_Help to
type VirtualBinding
Warning: Cannot convert string
Just installed TSM 4.1.0 on a Sun Sparc running
Solaris 2.7. Installation showed no errors. When I
typed 'dsmc', I got the following errors:
ld.so.1:dsmc:fatal:relocation error: file dsmc:
symbol _ex_register64: referenced symbol not found
Killed.
Reinstallation still produced the same
Hello,
Would someone kindly show me how to look up archives
for this list?
TIA
__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
they get sourced into your
current environment (by
logging out back in, or just running these 2
lines) and then stop and
start the ADSM service.
Ben Bullock
Unix system manager
Micron Technology Inc.
-Original Message-
From: Chuck Lam [mailto:[EMAIL PROTECTED]]
Sent: Tuesday
Hi-All,
On a newly configured TSM(v4.1) server(AIX4.3.3), I
configured a 100GB DiskPool consisting of six 18GB
virtual drives in a SAN. Things are working for a
while. Now I was told to make a DiskPool of 550GB.
If I use the current setup, I would need over 30 18GB
virtual drive. Obviously this
I am trying to get StorageTek L700 tape library to
work on a newly configured TSM4.1 running on AIX4.3.3.
In the morning, I backup the tapepool to a copypool
called drmpool. As the result, I have a few tapes
sitting in the 'drmpool' every morning. My intention
is to eject those tapes to the
I am setting up TSM in our shop and I am learning TSM
as I go. Right now, I have set up a 100GB Disk Pool
and one Tape Pool and one Tapecopy pool for making
offsite storage copies. My questions are:
If I am doing backups using this configuration, my
daily backups on NT, Netware, and Unix will
Thank you. I looked into that option, but TSM support
person was telling me that if Colocation was enable,
it would be one node, one tape, would not be able to
put different nodes of one platform on one tape.
--- Alan Davenport [EMAIL PROTECTED]
wrote:
You need to do colocation. Colocation
. You worry about tape handling
for all
(even if you do end up creating seperate storage
pools per
platform).
Suad
--
On Fri, May 25, 2001 at 02:21:23AM -0700, Chuck Lam
wrote:
I am setting up TSM in our shop and I am learning
TSM
as I go. Right now, I have set up a 100GB Disk
Pool
)666-4285 (fax)
-Original Message-
From: Chuck Lam [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 25, 2001 5:21 AM
To: [EMAIL PROTECTED]
Subject: TSM configuration questions
I am setting up TSM in our shop and I am learning
TSM
as I go. Right now, I have set up a 100GB Disk Pool
(such as databases).
Greetings
Rolf Meyer
Info Business Systems GmbH
Chuck Lam [EMAIL PROTECTED] am 25.05.2001
11:21:23
Bitte antworten an ADSM: Dist Stor Manager
[EMAIL PROTECTED]
An:[EMAIL PROTECTED]
Kopie: (Blindkopie: Rolf Meyer/Satisfactory)
Thema: TSM configuration questions
25 matches
Mail list logo