Let us know what you find.
Here's the final update, thankfully, to the problems I was having. All in all
it took almost 3 weeks for them to fix this problem.
With all the parts that were replaced there isn't any way for me to tell you
which were actually bad, but here's the list, and this
Believe it or not I'm still fighting the issue from last week.
I am not in a place to look this up and was hoping someone who knows can tell
me what the error is. From the front panel, below.
I hear they are flying someone in to help but in the mean time I am trying to
do what I can to verify
I've been having numerous problems lately with our 3584 and wondered if
those of you out there with one would mind sharing your firmware level.
Ours is on 7270, with LTO2 drives at 73V1. I've been on this for some
time and don't believe it is related to the issues we're having but you
never know
I'm guessing many of you will find this quite odd, I know I did, but I
had someone come to me and say they were going to ask for a 12TB LUN and
wanted to back it up. Without even mentioning the product they want to
use, obviously not TSM though, and I'm not even sure it would make
difference, how
.
Once and for all.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Gill,
Geoffrey L.
Sent: Wednesday, May 26, 2010 5:04 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] why create a 12TB LUN
I'm guessing many of you will find this quite odd, I know
How are these drives connected? Have you done any port/cable swapping to see if
the problem moves?
Geoff Gill
TSM/PeopleSoft Administrator
SAIC M/S-B1P
4224 Campus Pt. Ct.
San Diego, CA 92121
(858)826-4062 (office)
(858)412-9883 (blackberry)
-Original Message-
From: ADSM: Dist
For the past 2 days something has been screwing up backups by filling
the log and this morning I remembered the show logpinned command and
found the server that is causing it. I've cancelled the session but as
far as I know am at the mercy of TSM to kill it at some point. I
contacted the
Take a look also at the 'show logpinned cancel' command if that's not
what
you used to cancel the session - sometimes it's helpful. If that
doesn't
work then halting the server will do the trick, but that's not the
most
tidy or convenient way... assuming you're about to run out of log and
From what I understand, when you cancel the session, TSM rolls back
the
transaction. Sometimes it's quick, sometimes it can take quite a
while.
but the log won't grow any more from the session while it is rolling
back.
It may well be that the log isn't 'supposed to grow but that isn't what
I
Getting them all day here too.
Geoff
TwoThumbs BB..
- Original Message -
From: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To: ADSM-L@VM.MARIST.EDU ADSM-L@VM.MARIST.EDU
Sent: Thu Oct 29 19:14:02 2009
Subject: Repeat email?
Is anyone else getting this email many times today
about a
Does anyone know if there has been a change to the download site or if
it is just down? I can't get there from my saved links any longer.
Thanks,
Geoff Gill
TSM/PeopleSoft Administrator
SAIC M/S-B1P
4224 Campus Pt. Ct.
San Diego, CA 92121
(858)826-4062 (office)
(858)412-9883
I'm finding that what I know about how the DB works in 5.5 doesn't
really equal how it works in 6.1. On a Linux box I brought up to migrate
clients to a 6.1 server I created a 20GB log and 100GB DB. There 'will
be' about 150 nodes moved to this instance but currently about 20 are
backing up. My
Does anyone have an idea how to resolve this other than using this
solution? I don't have this ability but tho9ught there should be a way
to extend the log just like in 5.5 with the server down. The problem I
had is the db backup is failing and all of my attempts to fix it have
led to it telling
I wanted to follow up on this thread since 'finally' the drive was
replaced, for the 3rd time, and is showing online. I went over the
problem with the IBM folks who used to manage things, at least they were
nice enough to help me out so I could basically look at things myself
and relay my thoughts
I'm looking at this wondering if there is more than one issue going on.
This is a Linux box that was built using all the tools that should have,
from what I've read anyway, set up all variables so as not to have
issues with a DB Backup. Following the recommended steps everything
seems to be
.
Then in
AIX it will show up as a new rmt device.
Gill, Geoffrey
L.
GEOFFREY.L.GILL@
To
SAIC.COM ADSM-L@VM.MARIST.EDU
Sent by: ADSM:
cc
Dist Stor
Manager
Subject
Hi all,
This situation has never happened to me before so I'm a little unsure of
the steps and order to fix it. Running AIX 5.3 with a TSM instance at
5.5.1. LTO drives are zoned in through a switch to the TSM server, 2
drives to each fibre card. Support for the IBM drives was not renewed
with
I'm looking at different ways to try and get the most current db backup
to a DR site by the quickest and easiest means, and hopefully on a daily
basis. (might be wishful thinking) At the moment I'm not sure what sort
of link we'd have for data throughput. Even if I do get something in
place it
Hello all,
I am struggling a bit trying to find a way to see tape and library devices as
easily as you can in AIX so I can add a library and drives to a TSM instance
I'm trying to get up on Linux. On the Linux box I built I loaded, Redhat5, TSM
6.1.1.1 and the IBM drivers and it looks like
I am stumbling through an installation of 6.1 on Linux. I've gotten to a
point where I can rebuild a system from scratch, using a procedure doc I
created, up to and including the installation of 6.1. My next step is to
try and configure it but I noticed there are already 2 patches out there
for
For those with VTL's can you give me an idea of how many tape drives you
have defined? I'm listening to the vendors setup ideas and it seems to
me the 10 tape drives they want to define for TSM sure seems like a low
number when you take into consideration all the things that need to be
done and
If there is anyone using this VTL, if you don't mind would you please
contact me off the list? I've got some questions for anyone with some
experience with it.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-B1P
(858)826-4062 (office)
(858)412-9883 (blackberry)
For those that tested 6.1 in a Linux environment I'm looking for any
problems you had. During my testing on AIX and Windows I had failures
during the installation which were always DB2 related. I'm getting ready
to bring up TSM on a Linux box and am looking for your experience. This
is a new
] On Behalf
Of
Remco Post
Sent: Tuesday, July 07, 2009 3:00 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM6.1 on Linux
On 7 jul 2009, at 19:34, Gill, Geoffrey L. wrote:
For those that tested 6.1 in a Linux environment I'm looking for any
problems you had. During my testing on AIX and Windows
Hello All,
Sorry for asking here but with all the folks using IBM hardware I was
hoping someone might know where to find this. I have been looking for
information from IBM related to hardware retirement/support or roadmap
showing the same. My IBM site search so far hasn't turned up anything
I'm not at all familiar with Linux at all and am looking for some help
because so far everything I've found so far hasn't helped. Folks here
want me to bring up a TSM Linux environment so I've downloaded device
drivers and TSM software. The device driver readme shows the command to
install the
Is anyone out there using SANergy in their environment? With the changes
we're going through it looks like the environment, wherever it's going
to be housed, is going to allow changes. I'm looking for information
from anyone who is using TSM in a SAN environment instead of a
segregated backup
without going into SANergy per se, I would suggest to you to think
very carefully what problem you want to solve by using any SAN-shared
filesystem.
I'm not looking to solve a problem just looking for input as it relates
to SANergy and setting up a new environment in a new location and only
if
So your question (in different words) is how to keep the backup
traffic
off the regular network. You see 2 options: 1) a separate backup
network, or 2) lanfree over the SAN. Lanfree then comes in 2 flavors
of to tape (lanfree to tape) and to file volumes (lanfree via
sanergy).
Is this
Dave,
I have this version on a server I was testing 6.1 which I restored to 5.5.2 and
have not seen any issues.
Geoff
- Original Message -
From: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To: ADSM-L@VM.MARIST.EDU ADSM-L@VM.MARIST.EDU
Sent: Tue May 19 18:50:06 2009
Subject: TSM Server
Good day all,
Does anyone know if there are any docs out there that show performance
comparisons for the different platforms or AIX and Linux specifically? I
am not looking for info related to 6.1 just TSM in general. If anyone
running on a Linux platform would like to respond with info that
I use this small unit for testing TSM. It holds 8 tapes and has an LTO3
drive. I unlocked the 2 magazines and filled them with empty tapes,
initially there were 3 tapes in them, so now I have 1 cleaning tape, 3
tapes already assigned in TSM and 4 new tapes. The problem I am having
is labeling and
Look like it is time to run audit library to discover the missing
tapes.
AP
Already tried that and it didn't do anything.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-B1P
(858)826-4062 (office)
(858)412-9883 (blackberry)
Email: geoffrey.l.g...@saic.com
This makes no sense as it relates to a license. This is a client not a
server so unless UNIX is different from Windows with respect to
maintenance and patches you can install either maintenance OR patches
on a clean system and there is nothing you need worry about. Granted I
don't do a lot of UNIX
I've been rebuilding a test AIX server from tape after testing 6.1. I
cleaned the server up and it is working just fine at level 5.5.1.0. I
downloaded 5.5.2 client and installed it but when trying to run dsmc get
the below error:
ANS0101E Unable to open English message repository
I have and it works. I did this during the beta program. You just need all the
proper pieces performed in the proper order.
Geoff
- Original Message -
From: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To: ADSM-L@VM.MARIST.EDU ADSM-L@VM.MARIST.EDU
Sent: Sun Apr 05 17:30:43 2009
Subject:
About 4 years ago some people here decided to bring in Netbackup. No
good reason at the time but everyone involved is making it sound as if
TSM was the problem. In a meeting we had yesterday to discuss moving
everything to TSM they are now making it sound like they can't get rid
of it, no
What I have done is create shortcuts on the desktop for this, i.e.,
Cluster nodes with resources that can reside on multiple nodes. The GUI
shortcut, if that's what you're using, should have added the
-optfile=path/info/to/dsmwhatever.opt. The name of the shortcut I use is
the nodename in the
While working on a proposal to move SAP back to TSM I discovered nothing
in our environment for SAP has changed the past 4 years. So the question
is what client and TDP version is available for this platform?
I'm guessing the 5.1.8 version is the best client we can do there, at
least that is
Does anyone know of a SAP R/3 solution for tru64 to TSM? It looks like IBM has
dropped it.
Thanks,
Geoff
I have a question that I hope those using TSM to back up direct to tape
can answer. We don't, and never have, done this here and I'm not looking
to implement it either. I am really looking for information as to what
happens to the backup is a tape error occurs. (I just know I'm going to
get this
...@vm.marist.edu] On Behalf
Of
Gill, Geoffrey L.
Sent: Monday, February 23, 2009 11:28 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] backups direct to tape
I have a question that I hope those using TSM to back up direct to
tape
can answer. We don't, and never have, done this here and I'm
I am in a fight to, what looks like, justify why we should keep TSM and
not move everything to netbackup. But without going into details (very
long and aggravating story in which I may have to leave and look for
work elsewhere) I have a question as it relates to the mainframe. We
have one here but
A better question might be: how are they justifying converting
everything to netbackup?
This the exact question I was going to ask when I got in this meeting,
which I thought was supposed to be today but nobody has shown up yet.
Instead of coming to me to talk about TSM they went to a group of
Sent: Tuesday, January 20, 2009 2:48 PM
Subject: Re: [ADSM-L] Transfer/transition netbackup data to TSM
I also kept it and sent it yesterday in my response. I suspect there is
a giant CYA going on because I added some other facts, which is
probably why nobody has dropped by yet.
Geoff Gill
Hello,
Hart, Charles A wrote:
Couple folks just came back from pulse and one of the Labs was the
TSM
Upgrade, apparently some Beta testers are seeing a 40GB upgrade DB
taking 28Hrs on avg hdw
is this is true than this would be a nightmare.
Can anyone comment on that ??
There
running the upgrade especially if the upgrade will not find them.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062 (office)
(858)412-9883 (blackberry)
Email: geoffrey.l.g...@saic.com
[Gill, Geoffrey L.]
Hi all,
I am trying to put together an email stating all the reasons TSM is the
way to go and to 'hopefully' dump our netbackup system. For those that
we know will be refusing to move for one reason or another I want to be
able to have answers for questions they might bring up or statements
Please forgive me for asking here but I have questions.
In the past I thought I had seen mentioned here that there some folks were
using netbackup along with tsm. We do, for unfortunate reasons, and I would
like to know if there are any people still out there that might contact me off
the list
We have a couple of clients using this product and the other day I'm
told the backup quit working. It looks, from the message below, to be a
password issue. I believe the product stores a password file, but not
sure of the name, that can be deleted and the client password reset and
a manual
www.storserver.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
Of
Gill, Geoffrey L.
Sent: Tuesday, October 07, 2008 10:06 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] storserver client
We have a couple of clients using this product and the other
Kelly,
I just got this message from the administrator who was looking at our DR
node earlier and said the password file was there. I updated the
password for the node on the DR TSM Server at that site so he could
connect and this is what he said:
Interesting - when I logged back in to SOAK to
STORServer, Inc.
485-B Elkton Drive
Colorado Springs, CO 80907
719-266-8777
www.storserver.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Gill,
Geoffrey L.
Sent: Tuesday, October 07, 2008 2:12 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L
I also have this problem with dbsnapshots and have tried everything I
know to get rid of 3 dbsnapshot tapes I have on a 5.5.1.0 system with no
luck. They will just not go away. They stay in the volhist no matter
what I do to try and remove them and are now 14 months old. Everything
matches another
Christian,
I just did an upgrade on AIX and went from 5.3.x.x direct to 5.5 then patched
to 5.5.1.0 with no issues.
Geoff
- Original Message -
From: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To: ADSM-L@VM.MARIST.EDU ADSM-L@VM.MARIST.EDU
Sent: Tue Sep 16 06:24:44 2008
Subject: Upgrade
The TSM AIX 5.5 and other versions seem to always have and upper and
lower case version of the Tivoli.tsm.msg.xx_xx.devices and server files.
Why is this and which isn't the 'correct' version that should be
installed en_US?
I'm looking at upgrading our 5.3 installation, and since it's been a
data and backup the db.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062 (office)
(858)412-9883 (blackberry)
Email: [EMAIL PROTECTED]
From: Gill, Geoffrey L.
Sent: Sunday, August 24, 2008 7:05 PM
To: Gill
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062 (office)
(858)412-9883 (blackberry)
Email: [EMAIL PROTECTED]
From: Gill, Geoffrey L.
Sent: Friday, August 22, 2008 2:06 PM
To: ADSM: Dist Stor Manager
Subject: RSM type Library (HP 1/8 G2
I have a system I just received that I am going to use for testing. It
is running Windows 2003 Enterprise and TSM 5.5.1.0. It has attached an
HP autoloader with an LTO3 drive in it. Seems it is considered an RSM
Library so dealing with tapes isn't something I know how to do yet. I
have tapes in
Anything 'mandatory' should be built in to the TSM product in my opinion. They
already get a ton of information about the servers so how hard can it be to add
cpu's to the node info.
- Original Message -
From: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
To: ADSM-L@VM.MARIST.EDU
We have a server that is backing up data using an entry in the dsm.opt
file, DOMAIN \\xxx.xxx.xxx.xxx\shares1
file:///\\xxx.xxx.xxx.xxx\shares1 . Does anyone know if it is possible
to use journaling from the server backing these up? I haven't found
anything but want to make sure others haven't
Indeed it sounds like it, but where? I don't see it on my passport
advantage login? I guess I'm not entitled to use the tool that is
required to keep track of my TSM licenses?
Not to mention that it sure seems odd that a so called 'free tool' isn't
really free.
Geoff Gill
TSM Administrator
I was wondering if someone who might be backing up mapped drives on a
particular server could weigh in on this please. We have a server, and I
have not seen the setup because I have no access at this point, that I
am told has mapped drives from a netapp. They want this drive backed up
with TSM and
I am told that after updating the client version to 5.4.1.2 this node
continues to get this message in the logs for the domino scheduler when
the service is started. It immediately stops afterwards. When the
administrator uses the domino GUI or client GUI he is not prompted for
the password. We
Client, Windows 2003 TSM 5.4.1.6
Server AIX 5.3 TSM 5.3.3.0
I asked this recently and did not see any responses so I'll try again.
This computer is a Domino server that is also running TDP. That backup
seems to be working fine, however the regular client backup fails daily.
I am getting more
I just got this today and was wondering if the errors being reported
indicate there is more than one problem with this client. The client is
running version 5.4.1.6 on Windows 2003. The entry
SNAPSHOTCACHELocation seems odd because so far the info I have found
on it refers to Windows 2000 use
We had an issue with a node and it had to be rebuilt. When they
installed the client and domino tdp they used a 5.3 version they had.
When they tried to restore a file the error they got indicated the tsm
version used to archive the file is newer than the one they are using to
restore it. They
I'm being told folks are setting up a VM Windows server that will have
disk assigned from a netapp. I was looking for info on how TSM handles
this type of setup, and since I have not even seen it here yet have no
idea how the server will see it. I have also been unable so far to
easily locate any
I have been exporting data and importing for quite some time and not
having problems today however when checking in the tapes I am seeing
these errors. Has anyone seen these before? I tried with and without
checkl but both fail miserably. I ran an audit of the library and tried
again with the same
Colorado Springs, CO 80907
719-266-8777
www.storserver.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Gill, Geoffrey L.
Sent: Wednesday, May 07, 2008 4:40 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] volume checkin
I have been exporting data
If you don't have this command directories get bind to management
class that has shortest retention time (or something like this);
That's not what the manual says Joe
The dirmc option specifies the management class you want to use for
directories. If you do not specify this option to associate
I just wanted to see if anyone else had ran into a similar issue. I
tried again on another Windows 2000 server... still no luck. I thought
I had read somewhere that client version 5.5 was no longer going to be
supported on Windows 2000.
5.4 is not supported on Windows 2000
Geoff Gill
TSM
I believe I read somewhere that 5.4.1.6 was the last 2000 version.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Welton,
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
-Original Message-
From: Gill, Geoffrey L.
Sent: Thursday, May 01, 2008 3:07 PM
To: ADSM: Dist Stor Manager
Subject: RE: TSM Client 5.4.2.0 OS Support
I believe I read somewhere that 5.4.1.6 was the last 2000 version.
Geoff Gill
Things do look like they have changed since I last looked.
http://www-1.ibm.com/support/docview.wss?rs=663context=SSGSG7uid=swg21
197133loc=en_UScs=utf-8lang=en
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
IMHO one of the things you need to consider is how long the migration
processes will take.
I have done that and use collocation groups already so I understand the
ramifications of this, but those are not my questions. My questions are
more specific to restores and was wondering if a single
I have not tested this so am wondering out loud how communications work.
If 'a' server is set up to co-locate by filespace how does that affect
the backup if at all. All data here goes to disk pool first so I am
guessing nothing changes there and don't think there are any things I
need to
We are still trying to get our minds around the crap we were sent by the
auditors. What we were told in meetings and what actually happened
turned out to be 180 out, and basically must have had the same
experience. The good news here is some idiot already has brought in NBU,
which has caused all
How about this. Being in an organization that brought in another system,
netbackup, it has confused things to no end. There are a lot of things I could
say but typing on a blackberry prevents that, and keeps my blood pressure down.
So my main comment is the grass isn't always greener just
, March 26, 2008 12:29 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: q occ vs q fi
Gill, Geoffrey L. wrote:
Don't understand. The q fi shows nothing, but admincenter shows a
filespace. Cannot remove node because it says there are references. Q
occ also shows nothing. I thought the last object in a backup
I am finding an interesting phenomenon where Q fi nodename will show a
filespace and q occ nodenameshows nothing and q fi and q occ, not
specifying a nodename, returns different results. I can use admin
center and it will show the filespace for a node when q fi or q occ
shows nothing.
TSM
Don't understand. The q fi shows nothing, but admincenter shows a filespace.
Cannot remove node because it says there are references. Q occ also shows
nothing. I thought the last object in a backup would never expire on its own?
- Original Message -
From: [EMAIL PROTECTED] [EMAIL
Perhaps others have already dealt with this.
Is there a way to create a single .cmd file that can be used for one
schedule with multiple sqlservers in a cluster environment so it will
run properly no matter what instance is on any one node or may have
failed to a node it normally does not live
I've never done this before and I don't think I've seen it discussed so
I'll throw this out there. I was wondering if there are any
ramifications when switching nodes to a new backup schedule. Meaning is
there a chance that the nodes will be missed? I ask this because I have
seen nodes added to a
We have a very old Windows NT 4 server that was using Client 5.1.5.15
and an old version of TDPSql that just crashed. The TDPSql version I'm
not sure of but was hoping the log files from the client will tell me.
I believe it goes way back to 2.2.1, maybe earlier. Not sure if anyone
knows if log
No replies on the first post so let's try this. We have NT4 back up on a
box running sqlserver but the guy did not name the sql server the name
it was backing up under. My guess is this is why we are seeing nothing
looking to restore the db's. Having never done this, how can I restore a
database
I have been looking for a sample tdpsql.cfg to show how things are laid
out in this file but have found nothing so far. Sure I could just throw
things in it to see if they take but was hoping someone had a link or
one they wouldn't mind sending instead. Any help is appreciated.
Thanks,
You probably already saw this, but just in case...
Nope, missed it completely actually.
Since I have a few more questions might as well keep going. In a cluster
environment it looks like the software is installed on a local disk.
With an active/active cluster, and not really being concerned
There needs to be duplicate dsm.opt files on each host in the cluster.
'Clusternode yes' should be in each dsm.opt. 'SQLServer' with the SQL
cluster
network/instance name should be noted in each tdpsql.cfg. I went
through this
very problem last week, I was missing the SQLServer name from the
Is it possible to get a list of the OFFSITE tapes required to restore
a
specified node to the *latest* backup?
Many Thanks,
=Adrian=
I worked on this scenario with IBM support some time ago. It doesn't
surprise me that, even though I have recommended the system be able to
get me this info
Wouldn't then the relevant required for the restore (list of the
copypool volumes) pop up in the actlog?
It did not in any tests I performed.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
There is also a fix in this version that I found that resolves those
clients using journaling on more than one filesystem that do not have
the last backup completion date updated. This seems to have also been
fixed.
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC
While using the ISC today I received an error while assigning nodes to a
schedule. Now whenever trying to pull up that schedule with the ISC I
get this error in the server logs and the schedule shows there are no
nodes defined. It seems to be only this schedule having this problem. If
you try and
I was wondering if those using the sql tdp might pass on what they have
found is a good configuration for your systems. I certainly understand
there are going to be differences in how environments are set up and may
find I would have to use a completely different configuration. Honestly
the last
I just upgraded a 5.2 version of tdpsql to 5.5 and am getting the
following message in the tdpsql.log. Has anyone seen this when
upgrading?
02/20/2008 16:40:01
=
02/20/2008 16:40:01 Request : QUERY
Correct Del. I did not see that, only a popup for the .net framework. I'll get
those on and hopefully all will be well.
Thanks
- Original Message -
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU ADSM-L@VM.MARIST.EDU
Sent: Wed Feb 20 17:32:24 2008
Subject: Re: tdpsql
My question is: What tools are you folks using to monitor TSM and
alert
you to any problems.
Nicholas
We use Servergraph
Geoff Gill
TSM Administrator
PeopleSoft Sr. Systems Administrator
SAIC M/S-G1b
(858)826-4062
Email: [EMAIL PROTECTED]
Client 5.5.0.1
Server 5.4.0.3 AIX 5.3
I installed this new client on a number of servers about 1 week ago. The
problem did not rear its head immediately. What I have seen in the
client logs is a successful backup posted but what I see on the server
if a filespace that says it has not
Does anyone know if the new Admin Center install over top, on a Windows
box, what I already have in place or does the previous version need to
be uninstalled first. I have been unable to find any docs yet so I
thought I'd ask here.
Thanks,
Geoff Gill
TSM Administrator
PeopleSoft Sr.
TSM server AIX 5.3
TSM Server 5.3.3.0
I am running an import node, something we have been doing successfully
for quite some time now. For some reason today I am seeing this
INCOMPLETE status for this but no other errors in the activity log for
reading or writing a file. What else can cause
1 - 100 of 719 matches
Mail list logo
