I would look at the number of running scheduled sessions at that time. The
message is pointing at a server action (server rejected session), so try the
actlog.
-Oorspronkelijk bericht-
Van: shekhar Dhotre [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 20 november 2002 16:28
Aan: [EMAIL
Not true. We run them at the same time. You can even reclaim primary and
copypools at the same time, but than you could run into a tape conflict.
-Oorspronkelijk bericht-
Van: Tim Brown [mailto:tbrown;CENHUD.COM]
Verzonden: woensdag 13 november 2002 14:24
Aan: [EMAIL PROTECTED]
Onderwerp:
With you. We run 90+ clients and 700-800 gigs a day on a wintel box. We have
moved the large files servers of our AIX server to this wintel box, because
of performance.
-Oorspronkelijk bericht-
Van: Tony Morgan [mailto:TONY.MORGAN;FORTISBANK.COM]
Verzonden: woensdag 13 november 2002 17:55
a matter
of time before we are replacing the NSM with a wintel box. Our cause was not
based on the cost only, but it helped.
Gr,
Karel Bos
NUON ICT
-Oorspronkelijk bericht-
Van: Ray Baughman [mailto:rbaughman;NATIONALMACHINERY.COM]
Verzonden: maandag 11 november 2002 17:46
Aan: [EMAIL
We are running TSM 5.1.5.0 on win2000. It seems to be stable. No new (or old
fixed) problems found. It is running for a couple of weeks. We are waiting
for the AIX software, so that we can upgrade our NSM (which was running on
4.1.3 and in a couple of weeks migrated to 4.1.6, 4.2.1.9, 4.2.2.0 and
You are right. TSM mirroring is only for DB and Log. If you need mirroring
on diskpool you have to turn to hardware mirroring. Keep in mind, the data
is (in most cases) on the client, on copypool and tapepool. So you are
mirroring for just a few hours of possible dataloss.
-Oorspronkelijk
,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Karel Bos [mailto:Karel.Bos;NUON.COM]
Sent: Wednesday, November 06, 2002 15:19
To: [EMAIL PROTECTED]
Subject: Re: Diskpool volume mirroring
You are right. TSM mirroring is only for DB and Log. If you need mirroring
on diskpool
, cached or not. That is if
you haven't been able to backup you storage pool before the crash occurs.
Also, TSM caching has it's performance penalty...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Karel Bos [mailto:Karel.Bos;NUON.COM]
Sent: Wednesday
We had this on this TSM server version. Please upgrade.
-Oorspronkelijk bericht-
Van: Chuck Lam [mailto:chuck_lam;YAHOO.COM]
Verzonden: maandag 4 november 2002 22:46
Aan: [EMAIL PROTECTED]
Onderwerp: Problem tape
TSM 4.1.4 running on AIX 4.3.3
Hi,
Attached to this server is a
Seen this messages. Points, in our case, meanly toward memory problems on
the client side. Increasing the swapfile, reducing the resourceutil,
increasing fysical memory often helped (in that order). I tried the
memoryefficient back-up parameter, that allmost always didn't work.
When using drm:
select status,count(*) as 3584LIB from libvolumes where
library_name='3584LIB' group by status
select state,count(*) as DRMEDIA from drmedia group by state
-Oorspronkelijk bericht-
Van: Michelle Wiedeman [mailto:[EMAIL PROTECTED]]
Verzonden: maandag 7 oktober 2002 13:43
Hi,
1) Yes. We have had a couple of scsi tapedrive/card and cabling problems
which resulted in TSM thinking that there were problems which the tape.
2) select volume_name, stgpool_name, write_errors, read_errors from volumes
where write_errors0 or read_errors0 gives you al the tapes. Doing
I had something what sounds the same. TSM db on raid 5 (not anymore). Extend
started, server seems to hang. Went home and came back next morning. All
went well.
-Oorspronkelijk bericht-
Van: Karla Ross [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 2 oktober 2002 1:00
Aan: [EMAIL
Or
/* */
/* Query TSM to make a daily summary*/
/* */
set sqldatetimeformat i
set sqldisplaymode w
set sqlmathmode r
commit
select count(*) as Count, -
case -
when sum(bytes) 1073741824
schedules that run over midnight are counted twice:
So your results are not correct.
Regards Stefan Holzwarth
-Ursprüngliche Nachricht-
Von: Karel Bos [mailto:[EMAIL PROTECTED]]
Gesendet: Mittwoch, 2. Oktober 2002 12:52
An: [EMAIL PROTECTED]
Betreff: Re: Calculating amount of data being
Yes, you CAN DO off site reclaimation with one drive. The way it should be
set up is in the tsm books (online version) or one of the redbooks. I set it
ones up, and it work. Slowly but it work. The compagny I work for has divert
libraries with 6 to 10 drives (and still growing), but some of the
Use add/remove programs to do your installation. Scripting or manual setup
isn't working when using terminal service.
Greetings,
Karel Bos
-Oorspronkelijk bericht-
Van: Lisa Cabanas [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 14 augustus 2002 15:09
Aan: [EMAIL PROTECTED]
Onderwerp
is on
not to many tapes (depents number of tapedrives, mounttimes, sort drive).
Also keep the performance of the TSM server at a high level (processing
power, memory).
Gr.
Karel Bos
-Oorspronkelijk bericht-
Van: Kauffman, Tom [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 31 juli 2002 22
Yep, our netwerkpeople have had many sleepless nights due to this behavour.
It is not only on gigabit, but on all tcp/ip connections.
-Oorspronkelijk bericht-
Van: Rupp Thomas (Illwerke) [mailto:[EMAIL PROTECTED]]
Verzonden: donderdag 1 augustus 2002 13:52
Aan: [EMAIL PROTECTED]
Performance??
-Oorspronkelijk bericht-
Van: Gerhard Wolkerstorfer [mailto:[EMAIL PROTECTED]]
Verzonden: maandag 29 juli 2002 7:38
Aan: [EMAIL PROTECTED]
Onderwerp: MOVE DATA - Reconstruct Yes/No
Hi all,
is there any reason, why a MOVE DATA command with Reconstruct=No should be
used
?
q path??
-Oorspronkelijk bericht-
Van: Salak Juraj [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 17 juli 2002 17:11
Aan: [EMAIL PROTECTED]
Onderwerp: Question 5.1.1.0 / NT2000 / ANR1134W Migration terminated for
s torage pool DISKPOOL -
Hello,
does somebody share this problem with
Yes, you are partial right. The system32 dir is part of the system files
folder (see your TSM client, System Object). From memory, some ini file is
responsable for this and other default exclude's.
Greetings
Karel
-Oorspronkelijk bericht-
Van: Salak Juraj [mailto:[EMAIL PROTECTED]]
Not sure what is going on. But do you use audit to check in tapes? That will
not work. What you should do is do a checkin vol search=library stat=scr
(use the web interface). Audit library is for mismatch only, it doesn't
check in volumes.
-Oorspronkelijk bericht-
Van: Cahill, Ricky
Karel Bos
NUON ICT
run stg pool backups in more than one session parallel : maxproc=2
update dev
mountlimit=2 or higher
-Oorspronkelijk bericht-
Van: Zlatko Krastev/ACIT [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 5 juni 2002 7:47
Aan:
TSM composes a file transfer list before sending the files to the TSM
server. In the time between composing the list en sending the data the file
can be deleted.
-Oorspronkelijk bericht-
Van: Farren Minns [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 10 april 2002 10:44
Aan: [EMAIL
No use. 4.x client has this problem also.
-Oorspronkelijk bericht-
Van: Burak Demircan [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 9 april 2002 14:16
Aan: [EMAIL PROTECTED]
Onderwerp: Re: File length too long
You should upgrade to 4.x serious to support Unicode that has
no such
For a long time we have performance problems with our TSM server. In a
attempt to find out where the problem is a run a number of back-ups and
restores with the traceflag=perform tracefile=c:\trace.out switches.
The back-up works fine, but the dsmc res filespace -traceflag=perform
. Is there a way
to keep somesort of communicatie from the client to the tsm server and back?
Met vriendelijke groet,
Nuon ICT
Coördinator Back-up en Restore
Karel Bos
Gebouw 3 kamer 0.28
Spaklerweg 20
1096 BA AMSTERDAM
tel. +31 (0)6 557 33 948
If you use resourceutil=5 or greater and have a fast (and stable) network it
can be done.
-Oorspronkelijk bericht-
Van: Andrew Hull [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 13 maart 2002 11:05
Aan: [EMAIL PROTECTED]
Onderwerp: TSM 4.2.1 and oracle
I want to be able to backup a
TSM doesn't support multiple reads/writes from/to the same tape. We use
resourceutil en max mountpoint 1. The client uses multiple back-up sessies
to multiple tapes. It works fine.
-Oorspronkelijk bericht-
Van: Sascha Askani [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 13 maart 2002
Hi,
We have changed our scheduling mode from prompted to polling. Scheduled
back-ups run fine. The immediate client schedule won't run. The status of
the immediate schedule turns to pending and will not function.
Schedule Name 621
Description -
Action INCREMENTAL
Options -
Objects -
Priority 1
the
restore time less than 24 hours (tested!). If so, tell me how, please.
Thanx,
Karel Bos
NUON ICT
Holland
Are back-up sets a option?
-Oorspronkelijk bericht-
Van: James healy [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 18 december 2001 22:22
Aan: [EMAIL PROTECTED]
Onderwerp: Re: Incremental forever -- any problems? (Scary thoughts)
That seems to be really slow 8 gb per hour. I'm running
The following error occured
12/19/2001 15:07:52 ANR0871E Cannot find file space name for node 85, file
space 1073741823.
How can I see which node node 85 is and what filespace 1073741823?
Thanx in advance.
Think that is a TSM server - client level related action. What is the
clients level and on what level is the tsm server?
-Oorspronkelijk bericht-
Van: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 19 december 2001 13:47
Aan: [EMAIL PROTECTED]
Onderwerp: convert archive
it without actually doing a restore!
Robin Sharpe
Berlex Labs
Karel Bos
Karel.Bos@NU
ON.COM To:[EMAIL PROTECTED]
cc:(bcc: Robin Sharpe/WA/USR/SHG)
12/19/01 Subject
My info is that these messages are network performance related..
-Oorspronkelijk bericht-
Van: Coolen, IG (Ilja) [mailto:[EMAIL PROTECTED]]
Verzonden: donderdag 13 december 2001 11:43
Aan: [EMAIL PROTECTED]
Onderwerp: ADSM Client V3.1.07 on NT4-sp6 SESSION LOST.
Hi there.
On a
Nazir,
Run expire inventory to delete expired data,
run reclaim to free tapes,
If the tapes are really full, buy more tapes;
But more imput would have been helpfull...
greetings
-Oorspronkelijk bericht-
Van: Nazir [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 12 december 2001 13:18
It helps wen you state your client and server levels. Do you use or have you
installed the journal services (it uses a separate ini file)?
-Oorspronkelijk bericht-
Van: Marc Lowers [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 4 december 2001 17:01
Aan: [EMAIL PROTECTED]
Onderwerp: ADSM
I have had this also. I think I solved this by adding the destenation. The
node where you want to restore on has no \\m2-admin1\e$.
-Oorspronkelijk bericht-
Van: Tomas Hidalgo [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 4 december 2001 16:58
Aan: [EMAIL PROTECTED]
Onderwerp: Restore
Look at your volhist. Are the tapes in use by db backups. If so, do a del
volhist.
-Oorspronkelijk bericht-
Van: Nazir [mailto:[EMAIL PROTECTED]]
Verzonden: maandag 26 november 2001 13:51
Aan: [EMAIL PROTECTED]
Onderwerp: TSM doesn´t send backup to tapes.
Hi,
I have TSM on Win NT.
It
You cannot do a back-up of the system partition when configered as
clusternode! In short. One dsm.opt does the cluster controlers and one
dsm.opt does the cluster. So remove the clustercontroler drives from the
cluster dsm.opt. DOMAIN D: Q:, whereis d: clusterdata. Its al in the
readbooks.
If it serves your needs it is good.
-Oorspronkelijk bericht-
Van: Cook, Dwight E (SAIC) [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 20 november 2001 15:20
Aan: [EMAIL PROTECTED]
Onderwerp: Re: One server, two ip-addresses
We have one that uses three (3).
Two fast ethernet one GB.
If I remember it correctly the answer to this question is in the readme file
which comes with the client. You have to edit te setup.ini and change a
parameter.
-Oorspronkelijk bericht-
Van: Tom Hrouda [mailto:[EMAIL PROTECTED]]
Verzonden: donderdag 15 november 2001 15:40
Aan: [EMAIL
In the urly days of our implementation I had to restore a fileserver of
150Gig. It was don's in 13hours. After a few months the performance has
dropped to 5Gb/Hr, with files from a fileserver (exchange is getting
35-45GB/Hour. Microcode updates, change RAID parameters, and many other
things (don
Do an audit library and see what happens..
-Oorspronkelijk bericht-
Van: Patrick Sheehan [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 7 november 2001 23:24
Aan: [EMAIL PROTECTED]
Onderwerp:
Hello TSM'rs
I'm losing my mind these days with this,
Why when I checkout 10 tapes and add
You should change the default of domain all-local in all the filespace you
want to back-up. A the moment your domain specs include the filespace you
want to get rid of. Your exclude excludes only the data on the filespace,
not the filespace.
-Oorspronkelijk bericht-
Van: PAC Brion
If you don't want to move its data also, change the dsm.sys and dsm.opt. If
you want to move its data also do an export/import node.
-Oorspronkelijk bericht-
Van: Hunley, Ike [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 7 november 2001 16:57
Aan: [EMAIL PROTECTED]
Onderwerp: Move
I do think that you have to upgrade the ADSM version. If I remember
correctly LTO is support as from version TSM 4.X. Be sure to have a look at
www.tivoli.com.
Greetings
Karel Bos
-Oorspronkelijk bericht-
Van: Peter Daransky [mailto:[EMAIL PROTECTED]]
Verzonden: woensdag 7 november
, if
I remember it correctly, a fix for this bug.
Karel Bos
-Oorspronkelijk bericht-
Van: Wouter V [mailto:[EMAIL PROTECTED]]
Verzonden: zaterdag 3 november 2001 11:12
Aan: [EMAIL PROTECTED]
Onderwerp: Re: LTO Auto Cleaning Frequency
We are also using an LTO 3583 library now for 4 months
201 - 251 of 251 matches
Mail list logo