Hi all,
We have a requirement to share our 3494 library between our existing
servers (AIX running TSM application) and new windows server (running
VERITAS application).
We would like to partition our library so that windows server can have
access to only two tape drive out of 8 drives and
Recently we have Configured Storage Agents for LANfree backups.
Do you normally keep storage agents session running all the time?
or
Is it better to start storage agent just before backup / restore? And
normally keep it off.
With Best Regards
Yashwant Rane
Hi,
We are planning to implement TAM-OS on AIX server 5.2 running TSM Server
V 5.3.
Is there anybody having TAM-OS installed on TSM Server? Are there any
issues?
We have following configuration:-
TAM for OS Client to be installed on:
OS : AIX 5.2
Application: TSM server V5.3
Hi,
TDP Exchange 5.2.2, Windows 2003/Exchange 2003, TSM Server 5.2.2.5, Tape
Drive 3590. LAN 1Gbps.
We do full exchange backup using TDP everyday of size 300GB over LAN to
tape drive 3590 and getting a Throughput rate: 14 Mb/sec.
Is there anyone getting higher Throughput rate than this?
Hi,
Can anybody share his experience of complete recovery of Solaris 5.8 on
different system using UFSDUMP+TSM and using TSM only?
Please include detail instructions if possible. Thanks in advance.
Regards
Rane
I have seen such problems couple of times in our environment. In our
case it was always a mismatch of duplex setting on network switch port
and TSM client m/c port. I forced both i.e. Network Switch port and TSM
Client m/c port to Full Duplex (of course speed setting is also same),
this resolved
Hi,
Our Environment :-
TSM Server 5.2.2.5 on AIX 5.2
TSM Client/API V 5.2 on HPUX 11i
MUMPS Database MSE Release 8.0
We want to configure online backup of MUMPS Database MSE Release 8.0
using TSM client/API Ver 5.2
Is there anybody using TSM API V5.x to backup MUMPS Database MSE
Hi All,
Anybody has solution to following error :-
TSMSERVER - 5.1.6.5 on AIX 5.1 ML4
TDP for Exchange - 5.2.1
Exchange 2003 on Windows 2003
TSM BA Client and API - 5.1.6
BUFFers 3
BUFFERSIze 1024
Store size 13GB
When Exchange backup is started it work till
We have fibre attached 3590's attached to RS/6000 Model F80. We can cut mksysb on
these drives but can not boot from this mksysb tape using fibre attached 3590.
we are working with IBM H/W to make it work (as this is supported config.), but still
no success.
Is there anybody tested booting
Hi,
Is it possible backup files from Novell server using Novell B/A Client and restore it
on Windows server using windows B/A Client?
Is there any work around to achieve this? (other than mapping Novell server disk to
Windows and backup using Windows B/A Client)
Regards
Rane
10 matches
Mail list logo