FYI...as this is probably undocumented
(I had scripted jobs/macros that went against tables/columns...)...
partial response to support:
this coulda/shoulda been doc'd...opinion...
changing cmd format...it has been debated that you'all own that...
now select/db queries...seem to have been made
You may find that AIX handles the IP stack better than NT...opinion..
-Original Message-
From: Ray Baughman [mailto:rbaughman;NATIONALMACHINERY.COM]
Sent: Monday, November 11, 2002 10:46 AM
To: [EMAIL PROTECTED]
Subject: Server AIX vs NT
Hello,
We are looking to replace our TSM server
look at:
tsm: ADSMq drmstatus
Recovery Plan Prefix:
Plan Instructions Prefix:
Replacement Volume Postfix: @
Primary Storage Pools:
Copy Storage Pools:
Not Mountable Location Name: NOTMOUNTABLE
Courier
A good exercise would be to bkup your db, restore it to a test environment,
unload from your test
env., load from your test env.
hopefully you have a test system
take your time checkpoints...
a thought.
-Original Message-
From: Gianluca Mariani1 [mailto:gianluca_mariani;IT.IBM.COM]
is the db backup from the dbbackuptrigger (based on log filling?)? check
device class
is this db backup from a command (check device class in use...
-Original Message-
From: Theresa Whitney [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 20, 2002 8:45 AM
To: [EMAIL PROTECTED]
The fix for this is at these levels (per apar doc):
Apply patch 4.2.2.5, 5.1.1.1 or higher, available through
Tivoli Web Page to resolve this problem, or fixing
PTF when available.
Here's a blerb from my etr/pmr (problem ticket):
The APAR you are referring to is IC34462. This issue is
accounting logs...when you have resourceutilization higher than 1...there's
multiple entries
in the dsmaccnt.log file...
I preferred to use a select statement and get totals out of the summary
table, but that's
screwed up now...
argh!
-Original Message-
From: Mr. Lindsay Morris
Ok. This one is teasing me...puzzeling...
trying to get, from the backups table files that ONLY are inactive (if the
file has
an active copy, I don't want to have this in the output).
have tried...myself...
anyone?
have tried statestate, but this doesn't work
?
Thanks tim
and it did not find what I was looking for. I
am going to turn in a problem record on it because it should work.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-Original Message-
From: Williams, Tim P {PBSG} [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 20, 2002 1
on it because it should work.
Paul D. Seay, Jr.
Technical Specialist
Naptheon Inc.
757-688-8180
-Original Message-
From: Williams, Tim P {PBSG} [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 20, 2002 1:59 PM
To: [EMAIL PROTECTED]
Subject: SQL - punting for help
Ok. This one
known problem
Item IC33890
APAR Identifier .. IC33890 Last Changed..02/07/04
OUTPUT FROM SELECT COMMAND FOR THE DRIVES TABLE WILL NOT RETURN
A DEVICE VALUE IF THE DEVICE_TYPE IS NOT SPECIFIED/REQUESTED.
Symptom .. IN INCORROUT Status ... CLOSED UR1
but did it FIX the problem?
-Original Message-
From: Burton, Robert [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 19, 2002 2:32 PM
To: [EMAIL PROTECTED]
Subject: Re: Problem deleting filespace SYSTEM OBJECT
we are having the same problemand the auditdb for a 37 GB database
I too am experiencing this problem. I have not opened it up as an issue,
yet.
I was the apar owner of the issue with device...from the drive
tableand
offered that up to this listserv...
FYI Thanks Tim
-Original Message-
From: Martinez, Matt [mailto:[EMAIL PROTECTED]]
Sent: Thursday,
I sent all the apar on thisdid no one get it?
I was the originator of this aparmonths ago...
?
tw
-Original Message-
From: Seay, Paul [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 19, 2002 7:21 PM
To: [EMAIL PROTECTED]
Subject: Re: 4.2.x selects from DRIVE table
Yes, I
Good stuff...thanks!
-Original Message-
From: bbullock [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 03, 2002 1:31 PM
To: [EMAIL PROTECTED]
Subject: Re: finding old filespaces from unix clients...
As with most TSM commands, are a million ways to skin this cat. Here
is a
a crude way is...for a single file...issue a restore to another filename and
watch
what tape mount gets called...you can also cancel the restore once the
mount is requested (q sess f=d...).
FYI
-Original Message-
From: Alexander Verkooijen [mailto:[EMAIL PROTECTED]]
Sent: Friday, August
generate backupset doesn't show any info on the q vol, because the tape
doesn't get put into any stgpool.
SO, with that DRM is useless, I believe.
Note files and dirs onlyquestion registry (NT).
I had to watch the mounts to figure out what node was on what tapes
even the backupset table
You can't find ANY os/2 code?
os/2 isn't supported any longer. We still have it here too.
I do have the install executable...for v3.7.2.0 for os/2 if u need it.
-Original Message-
From: Oscar Kolsteren [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 28, 2002 3:17 AM
To: [EMAIL
Yepbut try...to disable ethernet and re-enable ethernet...
this should get you arount the reboot
The above hasn't worked only once, I believe, then we
resorted to a reboot.
to the IBM bcc'dother accounts having the same problem(s).
FYI!!
Thanks Tim
-Original Message-
From:
retrying posting...
-Original Message-
From: Williams, Tim P {PBSG}
Sent: Thursday, August 15, 2002 1:37 PM
To: 'ADSM: Dist Stor Manager'
Subject: sql and output redirection...how to..RE: Deactivate ALL admin
sch edules? (how-to)
set sqldisplaymode wide
tsm: ADSMselect 'update schedule
I had some issues with mount points not being available.
I also have my mount limit set to drives.
I ended up recycling my tsm server process and this
cleared the situation...
FYI
-Original Message-
From: David Longo [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 15, 2002 8:31 AM
To:
Here's a couple of examples:
select drive_name from drives where online not like 'YES'
select current date as tmpdt, count(*) volume_name, stgpool_name from
volumes -
group by stgpool_name having stgpool_name like '%TAPE%'
-Original Message-
From: Michelle DeVault [mailto:[EMAIL
I like the mtlib -l/dev/lmcp0 -A
shows adapters and connectivity...
If you are HA on your 3494...it will show you both sides, both adapters...
FYI
-Original Message-
From: Seay, Paul [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 01, 2002 3:47 AM
To: [EMAIL PROTECTED]
Subject: Re:
Hi. Someone said that had found their answer.
try help SET DRMCHECKLABEL
(Specify Label Checking)
-Original Message-
From: Burak Demircan [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 12:26 AM
To: [EMAIL PROTECTED]
Subject: move drmedia
Hi,
How can I prevent my 3583
1st question...you have colocation on or off for the node/PD/storage of
interest?
-Original Message-
From: Marc Lowers [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 11:00 AM
To: [EMAIL PROTECTED]
Subject: select statement using filespaces and tapes
I'm looking for a select
Note your number difference on
Copied 1823964 database pages (unload)
1823962 database records. (load)
pages and records...I've already called support on this...
and I've seen pages and record numbers not match
you should call supportopinion.
FYI
Thanks Tim Williams
(972) 376-7774
I have seen this problem and have an apar open with Tivoli.
We can't TEC alert, if there's no specific message that a drive went
offline...
other than perhaps a anrd (we're not going to rightly tec alert on
THAT message):
IC34067
Item IC34067
APAR Identifier .. IC34067 Last
Read below before you speak :)
At 14:52 02-07-2002 -0500, Williams, Tim P {PBSG} wrote:
You should be upgrading the 3584 firmware and upgrade to the 25d4 level at
the same time!
FYI
-Original Message-
From: Peter Pijpelink - P.L.C.S. BV Storage Consultants
[mailto:[EMAIL PROTECTED]]
Sent
You should be upgrading the 3584 firmware and upgrade to the 25d4 level at
the same time!
FYI
-Original Message-
From: Peter Pijpelink - P.L.C.S. BV Storage Consultants
[mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 02, 2002 1:21 PM
To: [EMAIL PROTECTED]
Subject: Re: 3584 firmware
I
Did you fully path the file name(s)?
-Original Message-
From: Joerg Pohlmann/CanWest/IBM [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 11, 2002 1:55 PM
To: [EMAIL PROTECTED]
Subject: Licensing problems on TSM for Windows 5.1.1.0
I have just upgraded my TSM server to 5.1.1.0 and am
Its 50 cleaningsit can be found on the product description (web)...you
really have to look...
FYI
-Original Message-
From: Sascha Askani [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 03, 2002 3:15 AM
To: [EMAIL PROTECTED]
Subject: LTO Cleaning Cartridge
Hi *SM'er ;)
Just a
I have noticed some change, too. I don't know why.
-Original Message-
From: Sias Dealy [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 31, 2002 8:20 PM
To: [EMAIL PROTECTED]
Subject: TSM Tech support not responding as quickly!
I was wondering why TSM tech support was taking a long
time to
How long does this take. For us, it takes forever (we have LOTS of logs in
24 hours...
Anyway we just do a q actlog begintime=now-24 (actlogscan.mac), then I use
awk...
dsmadmc -id=xxx -pa= -itemcommit
-outfile=/var/tsm/report_data/actlogtmp1 macro /flapps
/adsm/macros/actlogscan.mac
awk '$3
We have the following in a dir d:\autoapp (all the *.cmd files get run on
reboot) and in
tsmc.cmd is the following
d:
cd d:\tsmdir
start /min /c TSM Client - Scheduler d:\tsmdir\dsmc schedule
-password=whatever
FYI
Tim Williams
-Original Message-
From: Paul Ward [mailto:[EMAIL
to verify:
lslpp -l (or -h) tivoli.tsm.msg.en_US.server
you probably didnt update the msg
per the install readme
USING: To install, as root user, follow these steps:
0. Uncompress and untar the file TSMSRVAIX04_02_02.tar.gz
1. Halt your server
2. Start SMIT and select the following options to
are they using virtual node? and the node that they are doing virtualnode
from is at a lower level
of client code??
-Original Message-
From: Paul Zarnowski [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 13, 2002 2:03 PM
To: [EMAIL PROTECTED]
Subject: Linux - down-level
We have a couple
Also, look at dsmserv.err in your /usr/tivoli/tsm/server/bin dir.
(the bottom..)
-Original Message-
From: PINNI, BALANAND (SBCSI) [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 03, 2002 8:04 AM
To: [EMAIL PROTECTED]
Subject: Re: TSM Crashing
Paul
There is dbx utility in AIX to check
I had the same experience.
I ended up removing the original filespace (/inbound/site), but you could
rename it...as you
have another (/inbound)look/check via the q filespace command.
GUI doesn't work, but command line should (check)...q back or q arch...
good luck.
hope this helps.
TW
For aix, I don't believe that TSM works that way...removing a filesystem
(all activity stops...)
is different in TSM's eyes than removing a file (file(s) change
to inactive...delete policies take effect, etc)(from what I've seen).
*
reminder...if you archive from that filesystem, then you may not
You need to do the extract first...and this will make the images
file(s)...what I don't like...is you
get all the languages too
we put this to a samba drive...I do have a cleanup that I constructed that
you can use as a model to trim down to just english (1033mst):
of an
install).
FYI
-Original Message-
From: Jim Healy [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 26, 2002 12:42 PM
To: [EMAIL PROTECTED]
Subject: Re: 4.2 silent install
how do you execute the extract?
Williams, Tim P {PBSG} [EMAIL PROTECTED]@VM.MARIST.EDU on
04/26/2002 01:06:55 PM
you probably have something in your dsmerror.log when you try to do a
incrementalhere's my etr:
Abstract:LANS1149E No domain available for incremental
backup
User keyword:
Status: Closed
Responsible:
Type:Software Problem
Severity:
do you really have a space between /devand /smc0?
there shouldn't be one...
-Original Message-
From: Eduardo Martinez [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 24, 2002 10:41 AM
To: [EMAIL PROTECTED]
Subject: Tape Library errors
Hello everyone.
I have problems installing
is the name for your machines
register node
for the tdp and the nodes that they run onthe same name?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 19, 2002 7:02 AM
To: [EMAIL PROTECTED]
Subject: extra licences must be registered
Dear
we generally run a q event command ex=yes
you can use begindate begintime parms, etc
help q event
fYI
-Original Message-
From: Orin Rehorst [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 16, 2002 8:48 AM
To: [EMAIL PROTECTED]
Subject: Daily Backup Report
What are some good ways
tsm: ADSMq dbbackuptrigger
Full Devi- Incremental Log Full Incrementals
ce Class Device Percentage Between
Class Fulls
-- --- --
3590CART 3590CART
is the reason it wants an existing tape...because when you set
dbbackuptrigger
you specified numincremental (indicating incrementals instead of fulls
6 is the default for this
0 (full) would have to be specified...
FYI
-Original Message-
From: Frank Kruse [mailto:[EMAIL PROTECTED]]
Sent:
Look at your devclass on your dbbackuptrigger.
do a help on define dbbackuptrigger.
FYI
tsm: ADSMq dbbackuptrigger f=d
Full Devi- Incremental Log Full Incrementals Last Update
by (administrator) Last Update Date/Time
ce Class Device Percentage
select * from archives where node_name='casesensitive' /output
-Original Message-
From: Wholey, Joseph (TGA\MLOL) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 10, 2002 1:00 PM
To: [EMAIL PROTECTED]
Subject: sql/copygroup dilemma/question
I'm in the process of moving data from one
I don't think this will be solved for you.
From what I understand there are client upgrades that may have some coding
changes
that will update the TSM server database in such a way that downleveling
your client will
make functions unusable and that's why for some upgrades you will get a
message
I kinda like the summary table and it may have less issues than the
dsmaccnt.log
**
we have nodes that do hundreds of archives not to mention that
multithreading
incremental backups (resourceutilization in the dsm.opt) will create
multiple dsmaccnt.log records...
**
the select (2nd one below)
IF your tape stgpool is collocated (you have to consider if a node has
offsite tape volumes and if that
stgpool has colocation on or off as well)
AND you want to know how many tapes a node spans...
try this:
tsm: ADSMselect node_name, count(distinct volume_name) from volumeusage
where
lsdev -Cc tape
can you see the drive?
Ted has a good idea...
q mount shows nothing?
q sess f=d shows no mount for that drive?
mtlib -l/dev/lmcp0 -qM (query mount from aix if you have aix...) to look
for a mount on the operating
system level...
is the drive available at the 3494?
some ideas.
Can you clarify?
are you asking about what different type of queries there are...
on an admin command line:
help query
?
-Original Message-
From: Coats, Jack [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, April 03, 2002 4:53 PM
To: [EMAIL PROTECTED]
Subject: Query about QUERY in TSM
If you are using a gui or command line...archive...and go back to the gui or
command line...you
will HOLD that mount.
In our dsmserv.opt we now have:
IDLETIMEOUT 15
so when a user does not get all the way out of tsm after an archive,
retrieve, or whatever
we will terminate the session
Who taught the TSM advanced course...do you have a contact person...the
instructor?
Thanks
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 25, 2002 10:35 AM
To: [EMAIL PROTECTED]
Subject: Re: Unload/load DB question
From the manual Student's
Do you have an external scheduler that you can do job a before job b, before
job c, etc?
-Original Message-
From: Jason Liang [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 22, 2002 8:07 AM
To: [EMAIL PROTECTED]
Subject: TSM server automation.
Hi *SMers,
My environment: TSM 4.2.1.11
Sum - we run an external scheduler to do our daily TSM admin cycle:
move bkup data from disk to tape, then ba stg, then ba db, then ejects to
the vault, etc.
We use an external scheduler for this. When we upgraded our ba client (that
includes
dsmadmc), and it seems because the scroll prompt
When you put the accounting records in a spread sheet...the columns are
listed in column 1 below.
The numeric column is col 2 below, col 3 is the description...
This is AIX...
for MVS ?
Contents
a 1 Product version
b 2 Product sublevel
c 3
machine I have had installed IE 3.x.
After an upgrade to IE 5.5SP2 the error message was gone.
Bye
Rainer Tammer
On Wed, 20 Mar 2002 09:22:44 -0600, Williams, Tim P {PBSG} wrote:
I have seen this too. I have brought this to support, but haven't gotten
too
far on
problem resolution or acceptance
I have seen this too. I have brought this to support, but haven't gotten too
far on
problem resolution or acceptance.
**
Can you remember, if during your install, that you didn't have some
component of html...
and you selected yes...to go ahead and install it...(during the
install/upgrade of your
Not getting into the Atape drivers...lslpp -l | grep Atape to see what
you're curreently running...
and you'll probably have to upgrade (if you have a 3494), your atldd lslpp
-l | grep atldd
download
read the readme(s)
etc...
make reado all the filling tapes...
verify that your drive format is
We put in our first and are having an issue with the includebut
haven't researched further.
the include isn't picking up what we expectwe have to include everything
(exclude nothing) to get what we want backed up currently.
-Original Message-
From: Adams, Matt (US - Hermitage)
We don't backup everything on boxes. Traditionally we backup data only...d
drives and the like.
So, our include/excludes in the dsm.opt are like:
exclude *
include d:\...\*
From the manual, backupregistry is a default of yes.
Also, it backs up the registry to another locationadsm.sys??
I
The one delete I don't think I saw tried
delete filespace winnode \\winnode\e$
try
-Original Message-
From: David Longo [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 14, 2002 9:54 AM
To: [EMAIL PROTECTED]
Subject: Re: Delete filespace issue with Server v4.2.1.6?
If you are
We share 1 3494 between 2 tsm environments (on different aix boxes...).
We use different scratch categories and private categories, yes...
although we aren't library sharing as far as TSM is concerned.
-Original Message-
From: Jim Sporer [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March
If you have multiple NIC cards and your networks are such that it can get to
TSM via
both routes, then you can't guarentee which nic will be used...probably the
first
nic on the bus.
If due to routing...there's only one path for a client to reach the tsm
server, then
there you have it...
Have you taken your problems to Tivoli, so they'll have a chance to be
addressed...?
-Original Message-
From: Steven Bridge [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 08, 2002 7:02 AM
To: [EMAIL PROTECTED]
Subject: Problems with latest Windows client
We have just started installing
A note on ibmlink vs tivoli for problem input.
It goes to the same database...just different front ends.
I found and spoke with the internet strategist for tivoli support
and showed him ibmlink. IBMLINK if far superior. I believe the reason
for the tivoli front end is that there's no ibmlink
from the command
select * from syscat.tables
you can find a table called:
TABSCHEMA: ADSM
TABNAME: MGMTCLASSES
CREATE_TIME: 1996-04-25 14:31:19.025065
COLCOUNT: 12
INDEX_COLCOUNT: 3
UNIQUE_INDEX: TRUE
REMARKS: Management classes
then you can do:
tsm: ADSMselect *
Select * from backups where node_name='your TDP servername'
check the output...
-Original Message-
From: Coviello, Paul [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 04, 2002 8:52 AM
To: [EMAIL PROTECTED]
Subject: occupancy by date
Hi
We are backing up exchange and as
Total run time probably 4 to 10 hours. Depends on number of database
entries, entries per table, processor horsepower and some other
things.
[spdo11][/usr/tivoli/tsm/server/bin]date
Thu Jul 5 13:15:06 CDT 2001
[spdo11][/usr/tivoli/tsm/server/bin]
[spdo11][/flhome/tquall]more timtmp
check your dsmserv.opt for any hints of trace being invoked
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 04, 2002 7:05 PM
To: [EMAIL PROTECTED]
Subject: what happen !
What error is Trace/BPT trap error !
# dsmserv
ANR7800I DSMSERV
The server numbers should be unique (for the most part).
you can also try
select * from actlog where msgno=2565
-Original Message-
From: Allen Barth [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 01, 2002 4:44 PM
To: [EMAIL PROTECTED]
Subject: Re: How to use string operators in select
I believe that there's a mount point processing issue at 4.2.1.9.
There is, but I haven't checked, a fix for this in 4.2.1.11
We were having processes preempted due to some mount point issues
We will be going to 4.2.1.11 this Sunday.
FYI
-Original Message-
From: Þórður Aðalsteinsson
Even if TSM did support scripting
it would have to be a much more robust scheduler
best daily practices (high level)?
move all backup data that came in to tape and clear disk for the next
night...
next but not before...make the vault copy ba stg
next after that but not before a db
I'm one level back, but try on a server, admin command line
help anrmsg# like help anr4392i
tsm: ADSMhelp anr4389i
---
ANR4389I Expiration process cancelled.
Explanation: The CANCEL EXPIRATION command was issued and
[mailto:[EMAIL PROTECTED]]
Sent: Friday, March 01, 2002 10:17 AM
To: [EMAIL PROTECTED]
Subject: Re: Server-side scripting: not supported?
But, of course, that is the purpose of the script.
- Original Message -
From: Williams, Tim P {PBSG} [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday
Yes, it seems like a nightmare story. What drives were those...984x?
-Original Message-
From: Mark Bertrand [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 28, 2002 11:25 AM
To: [EMAIL PROTECTED]
Subject: FW: 3583 LTO problems
If you are using the 3583 with Windows 2000 do not let
It is a software bug that you have to be required to use libtype=manual...
tivoli will be fixing this.
-Original Message-
From: Fred Johanson [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 24, 2002 10:47 PM
To: [EMAIL PROTECTED]
Subject: Fwd: Re: Restore Database with a 3494 library
the
events table
TABSCHEMA:
ADSM TABNAME: EVENTS
CREATE_TIME: 1996-04-25 14:31:19.025065
COLCOUNT: 8INDEX_COLCOUNT: 1 UNIQUE_INDEX:
FALSE REMARKS: Scheduled Event
Results
-Original Message-From: Jane Bamberger
[mailto:[EMAIL PROTECTED]]Sent: Thursday, February 21,
2002 8:17
some thoughts...
delete archive
delete backup
perhaps delete filesystem
expire inventory
it will not be removed from any of your db backups...
and, I think, scratch tape reuse(how quick are tapes returned to scratch
status...this IS a parm...and
settable...if you reuse tapes quicker than 7
One default mgmt class, per policy domaindoes that answer it?
-Original Message-
From: Marc Lowers [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 18, 2002 10:40 AM
To: [EMAIL PROTECTED]
Subject: Default Mgment Classes
Could someone explain to me why when I mark a new mgment
I echo Kelly!
Another marketing slip?:
Tivoli used to provide Tivoli Data protection for workgroups (good for bare
metal recovery for NT, windows, from
what I heard). This product went unsupportedTHEN the pitch for bare
metal recovery was to use/buy...
a pgm/product from The Kernel Group.
I like this one that I cooked up:
ANS8000I Server command: 'select date(days(current_date)-1) as DATA date,
summary.entity, nodes.domain_name, nodes.platform_name, sum(summary.bytes)
as sum_bytes from summary, nodes where summary.entity=nodes.node_name and
summary.activity='BACKUP' and
Look at export...import...
on your server...
help export server
help import server
Thanks
Tim
-Original Message-
From: Hagopian, George [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 12, 2002 3:22 PM
To: [EMAIL PROTECTED]
Subject: Consolidate TSM servers to one
Greetings all...
I
86 matches
Mail list logo