IST.EDU] On Behalf Of
> Rick Adamson
> Sent: vrijdag 1 september 2017 13:29
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: TSM clients with 1 and 10 GB adapters
>
> Eric,
>
> I agree with Michael.
>
> I have the same setup on several Windows servers and to assure all
France/KLM Storage Engineering
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Rick
Adamson
Sent: vrijdag 1 september 2017 13:29
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM clients with 1 and 10 GB adapters
Eric,
I agree with Michael.
I have
(ITOPT3) - KLM
Sent: Friday, September 1, 2017 6:08 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM clients with 1 and 10 GB adapters
Hi Michael!
Your assumptions are spot on. So in my case I should use the following command
then: ip route add 2.2.2.2 via 10.0.0.1 dev eth1 I can't find if you
or Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Michael Prix
Sent: Thursday, August 31, 2017 3:18 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM clients with 1 and 10 GB adapters
Eric,
you didn't tell us anything about the network layout. Let's play with some
a
regards,
Eric van Loon
Air France/KLM Storage Engineering
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Michael Prix
Sent: donderdag 31 augustus 2017 21:18
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM clients with 1 and 10 GB adapters
Eric
Sent: donderdag 31 augustus 2017 20:16
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM clients with 1 and 10 GB adapters
If you have a distinct IP for the 10 Gb connection you can use that name/IP
address in the client's TCPServeraddress value in the dsm.opt or dsm.sys file.
Use 'q n f=d' to verify
Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Loon, Eric
van (ITOPT3) - KLM
Verzonden: donderdag 31 augustus 2017 16:47
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: [ADSM-L] TSM clients with 1 and 10 GB adapters
Hi guys!
I have tested in the past with 10 Gb attached Linux clients and everything
worked fine
Eric,
you didn't tell us anything about the network layout. Let's play with some
assumptions:
-
| TSMClient | | TSM-Server |
|| |
On Behalf Of
Schneider, Jim
Sent: Thursday, August 31, 2017 2:16 PM
To: ADSM-L@VM.MARIST.EDU
Subject: *EXTERNAL* Re: TSM clients with 1 and 10 GB adapters
If you have a distinct IP for the 10 Gb connection you can use that name/IP
address in the client's TCPServeraddress value in the dsm.opt or dsm.sys f
[mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Loon,
Eric van (ITOPT3) - KLM
Sent: Thursday, August 31, 2017 9:47 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM clients with 1 and 10 GB adapters
Hi guys!
I have tested in the past with 10 Gb attached Linux clients and everything
worked fine, but now we
Hi guys!
I have tested in the past with 10 Gb attached Linux clients and everything
worked fine, but now we will add a 10 Gb card to a host which is already
connected to 1 Gb. So this host has two possible paths to the server. How can I
make sure the TSM client uses the 10 Gb adapter only? I
11 matches
Mail list logo