Richard,
Are you using all the 8 drives of LTO? When the backup is running you type q
mount, how many drives you see mounted?
On initSID.utl, which values are you using for multiplex and maxsessions?
On gigabit ethernet, are you using jumb frames?
On iostat how's the tm-act column?
Regards,
Hi,
As many host adapters, ranks, clusters you can use better is your
performance. If you really need throughtput you should consider to implement
RAID 0 throught LVM. For example, lets supose that you gonna create an
Oracle instance about 400GB and you have four ranks available to you. More
you
You can install PSSP 3.4 for Regatta.
Regards,
Anderson
We had planned to run HSM on our GPFS/SSA/HACMP cluster of 3 p690s, and
suddenly IBM discovered that HSM is only supported on SP-nodes.
We tried installing it, but the installation scripts bombed out
because it couldn't find some SP
Hi Daniel,
Mutual configuration in HACMP supose that you have two TSM Servers instances
each running on diferent server. These instances have your own database.
So HACMP don't have the feature of load balacing.
Any way, if you want to put two TSM Servers with Mutual Takeover
configuration you
Hi all,
Does any body know where I can find information about TSM 5.1 compatibility with
BackTrack/OBSI?
Regards,
Anderson
Anderson F.
Nobre To:
[EMAIL PROTECTED]
[EMAIL PROTECTED]cc: (bcc: George
Lesho/Partners/AFC)
OM.BR Subject: TSM 5.1 and
Backtrack compatibility
Sent
Phil
- Original Message -
From: Anderson F. Nobre [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, May 14, 2002 6:45 AM
Subject: TSM 5.1 and Backtrack compatibility
Hi all,
Does any body know where I can find information about TSM 5.1
compatibility
with BackTrack/OBSI
Hi,
I have some doubt about how to improve the recovery time of a fileserver. I
mean a fileserver with 300GB I spend 4 hour to backup. But to recover it
from scratch takes about 24 hours. I was thinking in use backupsets, but in
my opinion I just transfering the problem from client to server. So
79 SOLLENTUNA
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
Anderson F. Nobre [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
2001-12-22 23:09 ZW2
Please respond to ADSM: Dist Stor Manager
To: [EMAIL PROTECTED]
cc:
bcc:
Subject: backup/recovery
Hi
I had this problem too. I solved doing the fourth option. Maybe after you
change the MAXNUMMP to zero happens the sessions of the clients finishes
before all the backup with failure. I solved this other problem setting the
parameter IDLETIMEOUT to 60. This problem happens because if the disk
Hi Denis,
It's too early to determine if you need a memory upgrade. First let's
analyze the situation...
At first look your CPU seems to be overcommited because the idle column is
about 11%. But if you sum the columns user and system it's about 23%. This
is your real CPU utilization, so it's too
Hi,
I've been problems with backup/archive of some files in a Netware TSM
Client. Here follows the message:
12/16/2001 19:05:01 Normal File--93
DADOS:/ENG_IND/ANDRELR/Cookies/andrelr@valueclick[2].txt [Sent]
12/16/2001 19:05:01 Normal File--79
Have you tried to put between ? Like this:
exclude /db[1-30]/oracle/.../*
Regards,
Anderson
TSM seems to ignore our exclude statements, no matter which wildcard
syntax
we use. For example, we have filesystems called /db1/oracle, /db2/oracle,
etc. through /db30/oracle that we want to
Hi,
I have a customer who wishes to assess the maximum risk he would incurr in
the following situation;
We have a copygroup for backup set for 31 day point-in-time recovery. We
do
not have nolimit for any copygoup parameters - we assume there will only
be
a single backup each day.
The
Jorge,
There are some important things that you have to know about configuring a
SAN with tape libraries. The first thing is that you have use dedicated HBAs
for the tape drives, because the tape drives use FC-AL protocol while disks
use point-to-point.
The second thing is in the panel of the
In fact, the TSM Server 4.2 can only run in AIX 5.1 with 32bits kernel. The
hardware doesn't matters.
The best case is if you could upgrade your AIX and TSM Server to the most
recent version.
- Original Message -
From: Gerald Wichmann [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
Scott,
Are you using the TSM SCSI Device Driver?
If yes, what's the target and LUN that you are using to define the library
device?
Can you type the following commands and show us the output?
# lsdev -Cc tape
# lsdev -Cc adsmtape
Regards,
Anderson
- Original Message -
From: Scott
This is just one tip for the next time, if it happens again. I hope don't.
Any way, you can create more than one device config and volume history in
dsmserv.opt. And after a DB backup you can execute the backup of devconfig
and volhistory without informing the file. When you don't inform the TSM
for any scsi ID or anything. Just a Library name and if it's shared or not.
Thanks again everyone.
Scott
They show up here.. But when I try to install the
Quoting Anderson F. Nobre [EMAIL PROTECTED]:
Scott,
Are you using the TSM SCSI Device Driver?
If yes, what's the target and LUN
Enable a dbbackuptrigger.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 6:41 AM
Subject: help:recovery log mode
Hi all,my logvol have total space only 300MB and my log mode is
rollforward,and my hard disk have no more sapce.About 1
Update the device class mount retention option for 1 minute.
- Original Message -
From: Przemysaw Maciuszko [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 7:14 AM
Subject: TSM on AIX and 3494 library problem...
Hello.
Some time ago we had a problem with 'no drives
Nope!
- Original Message -
From: Douglas Currell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 9:10 AM
Subject: Loadformat volume order
Is the order of the volumes an important consideration
when performing a loadformat command. For example is
there a
You can use the feature library sharing between servers. The storage agent
is just for TSM Clients.
- Original Message -
From: Poland, Neil [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, July 01, 2003 7:12 PM
Subject: Is the TSM for SAN Add-on necessary for 2 TSM servers to share
That's correct! It's true that work with RMAN is a little bit hard, but if use LTO2
you will see the advantage of using TDP for Oracle. There's no disk subsystem so fast
as LTO2. Those drive units can transfer at 70MB/s compressed.
So to utilize the LTO2 drives with it's full capacity you have
Hi,
This is a good question. If you look at the IBM Ultrium Users Guide, on the page 23,
it tells that once you enable the control paths by two drive units, and you see in the
AIX /dev/smc0 and /dev/smc1. You can enable through the Atape device driver, the
alternate pathing feature by doing
Hi,
I was trying to send an email through the ITSM Operational Reporting an it tells me
that it was unable to load mail_dll.dll and don't send the message. Does anyone know
what's that?
Regards,
Anderson
I know a client that has bought Imation tapes and when they have used the
tape cartridges they jamed into the drive units.
Regards,
Anderson
- Original Message -
From: Mark Ferraretto [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, September 11, 2003 1:30 AM
Subject: Non-IBM LTO
Abdulaziz,
How many filespaces are there per node? The migration process migrates the
data of one node per filespace.
Regards,
Anderson
- Original Message -
From: Abdulaziz Almuammar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 3:38 AM
- Original Message -
From: Anderson F. Nobre [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 8:57 AM
Subject: Re: Migration proccess issue
Abdulaziz,
How many filespaces are there per node? The migration process
space.
when the migration is triggered only one proccess works.
Regards,
Abdulaziz
- Original Message -
From: Anderson F. Nobre [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 8:57 AM
Subject: Re: Migration proccess issue
30 matches
Mail list logo
