[j-nsp] IP Rate Limit
Hello friends ; Is there any body know a way to apply rate limit for /32 ip on source for bandwith and pps ? We have /20 subnets and we do not want to let an ip send 50K + pps if there is no exception but how should i write a generlized rule ? [SPDNet Telekomünikasyon A.S. Logo]<http://https://www.spd.net.tr/> Cahit Eyigünlü SPDNet Telekomünikasyon A.S. +908508409773 75. Yl Mahallesi 5301 Sk No:24/A - MANSA 45100 [WebsiteGB]<http://https://www.spd.net.tr/> [email] <mailto:cahit.eyigu...@spd.net.tr> [:inkedIn button] <http://https://www.linkedin.com/company/spdnet>[Twitter button] <https://twitter.com/NetSpd>[Facebook button] <https://www.facebook.com/SpdNetTR> Bu e-posta kişiye özel olup, gizli bilgiler içeriyor olabilir. Eğer bu e-posta size yanlışlıkla ulaşmışsa, içeriğini hiç bir şekilde kullanmayınız ve ekli dosyaları açmayınız. Bu e-posta virüslere karşı anti-virüs sistemleri tarafından taranmıştır. Ancak SPDNET, bu e-postanın - virüs koruma sistemleri ile kontrol ediliyor olsa bile - virüs içermediğini garanti etmez ve meydana gelebilecek zararlardan doğacak hiçbir sorumluluğu kabul etmez. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Mx Policy routing problem
38 01 bd69 192.168.2.102 185.9.159.86 how can i over come this issue ?? [SPDNet Telekomünikasyon A.S. Logo]<http://https://www.spd.net.tr/> Cahit Eyigünlü SPDNet Telekomünikasyon A.S. +908508409773 75. Yl Mahallesi 5301 Sk No:24/A - MANSA 45100 [WebsiteGB]<http://https://www.spd.net.tr/> [email] <mailto:cahit.eyigu...@spd.net.tr> [:inkedIn button] <http://https://www.linkedin.com/company/spdnet>[Twitter button] <https://twitter.com/NetSpd>[Facebook button] <https://www.facebook.com/SpdNetTR> Bu e-posta kişiye özel olup, gizli bilgiler içeriyor olabilir. Eğer bu e-posta size yanlışlıkla ulaşmışsa, içeriğini hiç bir şekilde kullanmayınız ve ekli dosyaları açmayınız. Bu e-posta virüslere karşı anti-virüs sistemleri tarafından taranmıştır. Ancak SPDNET, bu e-postanın - virüs koruma sistemleri ile kontrol ediliyor olsa bile - virüs içermediğini garanti etmez ve meydana gelebilecek zararlardan doğacak hiçbir sorumluluğu kabul etmez. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Policy Based Routing
from 10.32.35.14: Destination Net Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 5400 a9d1 0 38 01 bd69 192.168.2.102 185.9.159.86 how can i over come this issue ? [SPDNet Telekomünikasyon A.S. Logo]<http://https://www.spd.net.tr/> Cahit Eyigünlü SPDNet Telekomünikasyon A.S. +908508409773 75. Yl Mahallesi 5301 Sk No:24/A - MANSA 45100 [WebsiteGB]<http://https://www.spd.net.tr/> [email] <mailto:cahit.eyigu...@spd.net.tr> [:inkedIn button] <http://https://www.linkedin.com/company/spdnet>[Twitter button] <https://twitter.com/NetSpd>[Facebook button] <https://www.facebook.com/SpdNetTR> Bu e-posta kişiye özel olup, gizli bilgiler içeriyor olabilir. Eğer bu e-posta size yanlışlıkla ulaşmışsa, içeriğini hiç bir şekilde kullanmayınız ve ekli dosyaları açmayınız. Bu e-posta virüslere karşı anti-virüs sistemleri tarafından taranmıştır. Ancak SPDNET, bu e-postanın - virüs koruma sistemleri ile kontrol ediliyor olsa bile - virüs içermediğini garanti etmez ve meydana gelebilecek zararlardan doğacak hiçbir sorumluluğu kabul etmez. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Auto Null System
Hellof friends ; We are using EX 4500 As L3 BGP device. And we need a script to send black hole an ip address if it exceeds 2Gbps download limit per second. Is there any possibility to do it automagically ? Thanks [SPDNet Telekomünikasyon A.S. Logo]<http://https://www.spd.net.tr/> Cahit Eyigünlü SPDNet Telekomünikasyon A.S. +908508409773 75. Yl Mahallesi 5301 Sk No:24/A - MANSA 45100 [WebsiteGB]<http://https://www.spd.net.tr/> [email] <mailto:cahit.eyigu...@spd.net.tr> [:inkedIn button] <http://https://www.linkedin.com/company/spdnet>[Twitter button] <https://twitter.com/NetSpd>[Facebook button] <https://www.facebook.com/SpdNetTR> Bu e-posta kişiye özel olup, gizli bilgiler içeriyor olabilir. Eğer bu e-posta size yanlışlıkla ulaşmışsa, içeriğini hiç bir şekilde kullanmayınız ve ekli dosyaları açmayınız. Bu e-posta virüslere karşı anti-virüs sistemleri tarafından taranmıştır. Ancak SPDNET, bu e-postanın - virüs koruma sistemleri ile kontrol ediliyor olsa bile - virüs içermediğini garanti etmez ve meydana gelebilecek zararlardan doğacak hiçbir sorumluluğu kabul etmez. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Juniper SRX3600 have a bug i think
-016077 AAEA6880 SRX3k SPC PIC 0 BUILTIN BUILTIN SPU Flow FPC 12 REV 13 750-016077 AADC9166 SRX3k SPC PIC 0 BUILTIN BUILTIN SPU Flow Fan Tray 0 REV 06 750-021599 AAAM4505 SRX 3600 Fan Tray GOT: === spc7, swanhill7, Ingress, QOS, per queue counters: GOT: Q# P PktCnt ByteCnt ErrPktCnt DropCnt Buf RateKbps GOT: -- - --- --- --- --- --- Before : GOT: 0 0 689433376 3198313481 0 173262666 0 0 After : GOT: 0 0 716151200 1322793729 0 187301004 0 0 GOT: === spc11, swanhill11, Ingress, QOS, per queue counters: GOT: Q# P PktCnt ByteCnt ErrPktCnt DropCnt Buf RateKbps GOT: -- - --- --- --- --- --- Before : GOT: 0 0 250772733 1150162904 0 1086140 0 0 After : GOT: 0 0 260742314 2506553813 0 1086140 0 0 GOT: === spc12, swanhill12, Ingress, QOS, per queue counters: GOT: Q# P PktCnt ByteCnt ErrPktCnt DropCnt Buf RateKbps GOT: -- - --- --- --- --- --- Before : GOT: 0 0 237042682 3273566470 0 4507285 0 0 After : GOT: 0 0 241128473 3830250900 0 4507285 0 0 SRX start dropping packets after 500k pps of the udp attack. We can not use threshold limit because it drops the real connections too while under attack. we cannot use session limit because the attack does not create session we tryed to block packet size with firewall filter but it does not change the result srx losts the connection [SPDNet Telekomünikasyon A.S. Logo]http://https://www.spd.net.tr/ Cahit Eyigünlü SPDNet Telekomünikasyon A.S. +908508409773 75. Yl Mahallesi 5301 Sk No:24/A - MANSA 45100 [WebsiteGB]http://https://www.spd.net.tr/ [email] mailto:cahit.eyigu...@spd.net.tr [:inkedIn button] http://https://www.linkedin.com/company/spdnet[Twitter button] https://twitter.com/NetSpd[Facebook button] https://www.facebook.com/SpdNetTR Bu e-posta kişiye özel olup, gizli bilgiler içeriyor olabilir. Eğer bu e-posta size yanlışlıkla ulaşmışsa, içeriğini hiç bir şekilde kullanmayınız ve ekli dosyaları açmayınız. Bu e-posta virüslere karşı anti-virüs sistemleri tarafından taranmıştır. Ancak SPDNET, bu e-postanın - virüs koruma sistemleri ile kontrol ediliyor olsa bile - virüs içermediğini garanti etmez ve meydana gelebilecek zararlardan doğacak hiçbir sorumluluğu kabul etmez. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] SRX3600 Problem
We are getting a spoofed ip syn attack. When attack starts and over 100K pps our SRX3600 was losting the connection. And we check the status of the device over the Serial connection. But we could not determine why it has been dropped the connection Should somebody help us to over come this issue ? r...@srx3600.spd.net.tr show security flow cp-session summary Valid sessions: 141 Pending sessions: 621628 Invalidated sessions: 517864 Sessions in other states: 1 Total sessions: 1139634 Maximum sessions: 2359296 r...@srx3600.spd.net.tr show security monitoring fpc 12 FPC 12 PIC 0 CPU utilization : 44 % Memory utilization : 67 % Current flow session : 147286 Current flow session IPv4: 147286 Current flow session IPv6:0 Max flow session : 524288 Current CP session : 1074031 Current CP session IPv4: 1074031 Current CP session IPv6:0 Max CP session : 2359296 Total Session Creation Per Second (for last 96 seconds on average): 13 IPv4 Session Creation Per Second (for last 96 seconds on average): 13 IPv6 Session Creation Per Second (for last 96 seconds on average):0 r...@srx3600.spd.net.tr show chassis routing-engine Routing Engine status: Slot 0: Current state Master Election priority Master (default) DRAM 1023 MB Memory utilization 44 percent CPU utilization: User 0 percent Background 0 percent Kernel 5 percent Interrupt 0 percent Idle 95 percent Model RE-PPC-1200-A Start time 2015-04-15 02:06:10 UTC Uptime 4 days, 15 hours, 16 minutes, 29 seconds Last reboot reason Router rebooted after a normal shutdown. Load averages: 1 minute 5 minute 15 minute 0.14 0.07 0.11 r...@srx3600.spd.net.tr show security monitoring performance spu fpc 12 pic 0 Last 60 seconds: 0: 39 1: 45 2: 44 3: 40 4: 44 5: 40 6: 38 7: 46 8: 45 9: 39 10: 44 11: 39 12: 38 13: 45 14: 38 15: 45 16: 44 17: 39 18: 44 19: 39 20: 44 21: 40 22: 44 23: 39 24: 38 25: 45 26: 44 27: 40 28: 44 29: 40 30: 45 31: 40 32: 45 33: 41 34: 45 35: 39 36: 45 37: 39 38: 45 39: 39 40: 44 41: 39 42: 44 43: 39 44: 44 45: 39 46: 46 47: 39 48: 45 49: 39 50: 44 51: 39 52: 45 53: 39 54: 44 55: 39 56: 44 57: 39 58: 44 59: 39 r...@srx3600.spd.net.tr show security monitoring performance session fpc 12 pic 0 Last 60 seconds: 0: 127861 1: 146887 2: 130877 3: 147286 4: 134179 5: 145303 6: 133196 7: 144339 8: 132233 9: 143981 10: 130861 11: 143042 12: 131280 13: 142719 14: 130623 15: 142493 16: 132094 17: 143124 18: 132726 19: 143938 20: 133022 21: 143349 22: 133100 23: 143469 24: 134321 25: 143694 26: 137340 27: 145672 28: 141399 29: 145458 30: 145697 31: 146920 32: 144260 33: 145259 34: 141360 35: 142157 36: 137389 37: 140399 38: 136483 39: 139640 40: 136597 41: 139363 42: 139707 43: 143110 44: 140994 45: 143038 46: 139781 47: 141751 48: 136746 49: 139456 50: 137395 51: 139898 52: 137503 53: 140300 54: 136762 55: 139315 56: 136245 57: 138951 58: 136685 59: 139288 r...@srx3600.spd.net.tr show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis SRX 3600 Midplane REV 07 710-020310 SRX 3600 Midplane PEM 0rev 08 740-027644 AC Power Supply PEM 1rev 08 740-027644 AC Power Supply CB 0 REV 14 750-021914 SRX3k RE-12-10 Routing Engine BUILTIN BUILTIN Routing Engine CPP BUILTIN BUILTIN Central PFE Processor Mezz REV 08 710-021035 SRX HD Mezzanine Card FPC 0REV 16 750-021882 SRX3k SFB 12GE PIC 0 BUILTIN BUILTIN 8x 1GE-TX 4x 1GE-SFP FPC 1REV 20 750-020321 SRX3k 2x10GE XFP PIC 0 BUILTIN BUILTIN 2x 10GE-XFP Xcvr 0NON-JNPR XFP-10G-SR Xcvr 1NON-JNPR XFP-10G-SR FPC 4REV 14 750-020321 SRX3k 2x10GE XFP PIC 0 BUILTIN BUILTIN 2x 10GE-XFP Xcvr 0NON-JNPR XFP-10G-SR Xcvr 1
Re: [CentOS] Kernel Or Hardwar e
we have detect that is is a memory issue and changed ram . Thanks in advance 2010/4/28 JohnS jse...@gmail.com On Wed, 2010-04-28 at 11:32 +0200, Peter Kjellstrom wrote: On Tuesday 27 April 2010, cahit Eyigünlü wrote: I saw memtest support only 4gb ram but i have 8gb ; Huh? I've run memtest86 on 72G machines it uses slow PAE but gets the job done. ... this is the error : BUG: unable to handle kernel paging request at ffe5 IP: [802a97ce] fput+0x0/0x12 PGD 203067 PUD 204067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: ipt_REDIRECT xt_owner xt_conntrack iptable_mangle ... Pid: 4243, comm: tar Not tainted 2.6.30 #1 ESPRIMO P5925 2.6.30 is not quite a CentOS kernel (OT warning..) what are you running exactly? --- A wild guess maybe Ubuntu or Debian. John ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] how to reroute all ADSL traffic via another server on the internet?
Open vpn is a nice solution in my opinion 2010/4/28 Rudi Ahlers rudiahl...@gmail.com On Wed, Apr 28, 2010 at 3:26 PM, Simon Billis si...@houxou.com wrote: Rudi Ahlers sent a missive on 2010-04-28: Hi all, Does anyone know, if it's possible to reroute all (i.e. HTTP / FTP / DNS / SMTP / POP3 / IMAP / etc) from an ADSL connected machine via another server, which is currently hosted with IS and has full internet access? i.e. Can I setup another machine, on a different public IP than the dynamic ADSL IP as default gw? OR do I need todo something on that machine to work as a router for such a setup? Both servers in this case is CentOS linux, but I'm sure that won't make a big difference? In principal yes you can do this type of thing. You'll have to enable ipforwarding on the gateway machine as a minimum. Can you provide more information about your networking setup - ip addresses and subnet masks, with an ascii drawing as well would help if you think it relevant :-), then we can provide detailed answers :-) Thanks Simon. ___ Hi Simon, Thanx for the help :) The ADSL connected server currently runs on 196.210.176.x, and the internet connected server runs on 196.34.136.109 So, there's not on the same subnets, by a mile. In fact, the 2 servers are seperated by about 30Km's, but I can get into both via the interner. Would ipforwarding still work, since I want to reroute all packets on eth0 of 196.34.136.109 in, and back out? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Kernel Or Hardwar e
i have seen many times the given error, there was no log about error. Beside this my machine never uses swap i realize that when i have last 500 Mb ram it get this error and after using 5Gb of 8 Gb it decreasing like plane crash :) I've found this form and it is the same with my error : http://www.webhostingtalk.com/showthread.php?t=913156 There could be a hardware problem i am not sure , i see this error at least one time in a day. Do you have an advice ? unluckeyly i have found only one people who has the same error with me :) and his machine is also same with mine :D ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Kernel Or Hardwar e
: 0029 RBX: 8801dd472b20 RCX: a702 RDX: 880028064000 RSI: 0046 RDI: ffb5 RBP: 88022b07cce0 R08: 880074921e68 R09: 88022d16ec80 R10: 880074921cd8 R11: 0104 R12: ffb5 R13: 880074921e68 R14: 880074921e00 R15: 88022b07cd08 FS: 7fb6605ee710() GS:880028064000() knlGS: CS: 0010 DS: ES: CR0: 8005003b CR2: ffe5 CR3: 748d1000 CR4: 06e0 DR0: DR1: DR2: DR3: DR6: 0ff0 DR7: 0400 Process tar (pid: 5372, threadinfo 88007492, task 880225d00e40) Stack: 80331706 8801dc88e428 8801dc88e428 8001 0004 880074921e68 8801dd472a80 802b0ce0 8801edc5c5c0 880074921e68 Call Trace: [80331706] ? ima_path_check+0x188/0x1b3 [802b0ce0] ? may_open+0xbf/0x261 [802b3308] ? do_filp_open+0x48c/0x88c [802ba958] ? alloc_fd+0x69/0x10c [802a6da0] ? do_sys_open+0x4b/0xc8 [8020b96b] ? system_call_fastpath+0x16/0x1b Code: 48 89 d8 5b 5d 41 5c 41 5d 41 5e c3 48 8b 05 d2 1a 52 00 41 ba 01 00 00 00 48 85 c0 49 0f 48 c2 89 05 b7 07 3b 00 e9 49 55 f9 ff f0 48 ff 4f 30 0f 94 c0 84 c0 74 05 e9 14 fc ff ff c3 55 48 89 --- 2010/4/27 Simon Billis si...@houxou.com Hi, cahit Eyigünlü sent a missive on 2010-04-27: i have seen many times the given error, there was no log about error. You really need to put the error here if you want people to help you. You're not making it easy for us to assist you. Beside this my machine never uses swap i realize that when i have last 500 Mb ram it get this error and after using 5Gb of 8 Gb it decreasing like plane crash :) I've found this form and it is the same with my error : http://www.webhostingtalk.com/showthread.php?t=913156 If I was you I would follow the advice given here - first split the decompression and the tar operation. The you'll know where it is failing. I would also check the memory as this post suggested. There could be a hardware problem i am not sure , i see this error at least one time in a day. Do you have an advice ? Yes, provide more information about _your_ problem in your posts, do not send html emails, do not top post, follow the advice given in the post you referred to. unluckeyly i have found only one people who has the same error with me :) and his machine is also same with mine :D Simon. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] iptables
I have installed shorewall at late last night and i forget it today i've restart my server now i am not able to connect it :D is there any way to connect shorewall ? 24 Nisan 2010 01:44 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: Wow i see it is very cool, and now i am starting to use it also :) +1 from me too :) thanks to every body for all help 2010/4/24 Ron Loftin relof...@twcny.rr.com On Fri, 2010-04-23 at 18:16 -0400, Alan McKay wrote: Have a look at shorewall (google it) for the best thing I've ever seen for managing a Linux firewall I agree about Shorewall. I've been using it for several years, and it does take a lot of the pain out of managing iptables. That being said, I will add my voice to the others on this list that point out that the OP's mods to /etc/sysconfig/iptables are very dangerous, and indicate a lack of understanding of how iptables and network security actually operate. Some study of basic principles and best practices is essential to managing a firewall configuration, regardless of the tool that is used. My $0.02 (US) worth for today. 2010/4/23 cahit Eyigünlü cahit.eyigu...@gmail.com: how could i add / remove iptable rules on cet os 5.4 final for tcp / udp base on ports -- Ron Loftin relof...@twcny.rr.com God, root, what is difference ? Piter from UserFriendly ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] iptables
Problem is different problem grub load error 2 unfortunatelly 2010/4/24 Simon Billis si...@houxou.com cahit Eyigünlü sent a missive on 2010-04-24: I have installed shorewall at late last night and i forget it today i've restart my server now i am not able to connect it :D is there any way to connect shorewall ? If you have locked yourself out then you'll need to have physical access to the machine and log in using the console. You may also be interested in a linux based firewall such as IPCOP. http://www.ipcop.org or http://sourceforge.net/apps/trac/ipcop/wiki, but this will turn the machine into a dedicated firewall. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] URGENT
I had a geub loader error 2 on starting centos and i am able to connect rescue system this is the result how could i get system work r...@rescuecd64 ~ # grub Probing devices to guess BIOS drives. This may take a long time. Unknown partition table signature GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found grub ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] URGENT
It had solved , the error encounters from thousands of a bad sectors :( i do not know how it happened but recovery system has repaired after then mount /dev/sda /mnt ext3 grub-install /dev/sda has worked thanks 2010/4/24 Wahyu Darmawan wahyu.darma...@gmail.com Hi, Have you try this : r...@rescuecd64 ~ # grub-install /dev/sda (or some device that installed CentOS) 2010/4/24 cahit Eyigünlü cahit.eyigu...@gmail.com: I had a geub loader error 2 on starting centos and i am able to connect rescue system this is the result how could i get system work r...@rescuecd64 ~ # grub Probing devices to guess BIOS drives. This may take a long time. Unknown partition table signature GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found grub ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] iptables
how could i add / remove iptable rules on cet os 5.4 final for tcp / udp base on ports ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [Fwd: Re: iptables]
Thanks also i found this editinig the : edit /etc/sysconfig/iptables is a good way for solution problem solved thanks for everybody's attention 2010/4/23 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : how could i add / remove iptable rules on cet os 5.4 final for tcp / udp base on ports If you don't want to mess with iptables, take a look at the firewall configuration tool system-config-securitylevel-tui. I think there's a graphical app also, but I've never used it. If you only need to open/close ports on a tcp/udp basis, this tool will do the job. Right now looking for an example. In my own documentation, I have some screenshots of the tool. Here, for example (second screenshot), opening port 67 for UDP requests : http://www.microlinux.fr/doc_en_stock/dhcp.html Or here (first screenshot), opening port 53 for both TCP and UDP requests : http://www.microlinux.fr/doc_en_stock/dns.html If you want more complicated stuff, you'll have to dive into iptables, though. Cheers, Niki ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] [Fwd: Re: iptables]
how or why i have redesigned it to this and it seems like worked : [r...@lin ~]# vi /etc/sysconfig/iptables # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -i eth0 -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8443 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 25 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT /etc/sysconfig/iptables 40L, 1617C 2010/4/23 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : Thanks also i found this editinig the : edit /etc/sysconfig/iptables is a good way for solution problem solved thanks for everybody's attention Your attention has to come back. Editing /etc/sysconfig/iptables is *not* the solution. Just! Read! ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] iptables
Wow i see it is very cool, and now i am starting to use it also :) +1 from me too :) thanks to every body for all help 2010/4/24 Ron Loftin relof...@twcny.rr.com On Fri, 2010-04-23 at 18:16 -0400, Alan McKay wrote: Have a look at shorewall (google it) for the best thing I've ever seen for managing a Linux firewall I agree about Shorewall. I've been using it for several years, and it does take a lot of the pain out of managing iptables. That being said, I will add my voice to the others on this list that point out that the OP's mods to /etc/sysconfig/iptables are very dangerous, and indicate a lack of understanding of how iptables and network security actually operate. Some study of basic principles and best practices is essential to managing a firewall configuration, regardless of the tool that is used. My $0.02 (US) worth for today. 2010/4/23 cahit Eyigünlü cahit.eyigu...@gmail.com: how could i add / remove iptable rules on cet os 5.4 final for tcp / udp base on ports -- Ron Loftin relof...@twcny.rr.com God, root, what is difference ? Piter from UserFriendly ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Pause time
i want to pause my cent os time and date in a spesific date :D is it possible ? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Pause time
i have a algorthm depending on a circul of a server time in a 10 day period and i want to execute this command : sudo date MMDDhhmm periodically in every 10 day :D 2010/4/19 Joseph L. Casale jcas...@activenetwerx.com i want to pause my cent os time and date in a spesific date :D is it possible ? Time stands still for no one... You can reset it (often if need be), but the clock has more than an aesthetic role for the user, it can't be paused. I _wonder_ why you need to do this? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Pause time
:D just for a secret :D if there is a possibility i will be very glad for this :D 2010/4/19 Joseph L. Casale jcas...@activenetwerx.com It needs to be set back 10 days every ten days? I'd say you have a real problem with your algorithm. I'd love to have to read his logs:) ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Pause time
nope , i just need to start the time from june to july on 2009 :D there is nothing else , just a trick of an brilliant idea in my opinion for my network :D 2010/4/19 m.r...@5-cent.us :D just for a secret :D if there is a possibility i will be very glad for this :D 2010/4/19 Joseph L. Casale jcas...@activenetwerx.com It needs to be set back 10 days every ten days? I'd say you have a real problem with your algorithm. I'd love to have to read his logs:) Does his algorithm include spam? mark or CC for a botnet? ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Pause time
Thank you i will check this out 2010/4/20 Les Mikesell lesmikes...@gmail.com On 4/19/2010 3:32 PM, cahit Eyigünlü wrote: i have a algorthm depending on a circul of a server time in a 10 day period and i want to execute this command : sudo date MMDDhhmm periodically in every 10 day :D Make a script file like: #!/bin/sh date MMDDhhmm echo /path/to/script | at now + 10 days Chmod +x the script and run it as root at the starting time you want. It will run itself again in 10 days. The now + 10 days is literal - the program will do the math. But, some strange things may happen to any cron jobs or other at commands that span the time warp. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Pause time
one more question my mysql server is on another machine if php executes a date time now and save it to db or show it on html will it show me the date of server that i setted :D or is there any possibility to change apache date :D 2010/4/20 Joseph L. Casale jcas...@activenetwerx.com nope , i just need to start the time from june to july on 2009 :D there is nothing else , just a trick of an brilliant idea in my opinion for my network :D Famous words:) heh... ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Swap = 0
My server returning an error sth. like swap = 0 then locking httpd and all other services is this normal this is a virtual machine and i give it 3 gb ram and 4cpu of i7 920 i have 1 gbit connection on this machine finally i have 4000+ clients at one time :S ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Swap = 0
r...@lin [~]# free total used free sharedbuffers cached Mem: 3090588 9088442181744 0 11948 266892 -/+ buffers/cache: 6300042460584 Swap: 2064376 227962041580 2010/4/13 Marcelo M. Garcia marcelo.maia.gar...@googlemail.com cahit Eyigünlü wrote: My server returning an error sth. like swap = 0 then locking httpd and all other services is this normal this is a virtual machine and i give it 3 gb ram and 4cpu of i7 920 i have 1 gbit connection on this machine finally i have 4000+ clients at one time :S No. This is not normal. Did you create a swap partition when you were installing the system? If you do a fdisk /dev/sda, change sda to your disk, you'll see something like this: Device Boot Start End Blocks Id System /dev/sda1 *1 13 104391 83 Linux /dev/sda214 535 4192965 82 Linux swap / Solaris /dev/sda3536442731262490 83 Linux The command free can give you a hint about your swap space: newt (Linux)$ free total used free sharedbuffers cached Mem: 20749561926248 148708 0 279001252224 -/+ buffers/cache: 6461241428832 Swap: 41929561244192832 newt (Linux)$ Regards mg. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Swap = 0
Actually that is better i think ; is there any optimization tool i have added 2 more gb ram but it is still locking server :S top - 13:11:13 up 33 min, 2 users, load average: 29.96, 13.75, 10.97 Tasks: 280 total, 40 running, 236 sleeping, 0 stopped, 4 zombie Cpu(s): 61.1%us, 34.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.3%hi, 4.4%si, 0.0%st Mem: 3090588k total, 2481096k used, 609492k free,16068k buffers Swap: 2064376k total,22796k used, 2041580k free, 274104k cached PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND 4331 root 18 0 169m 131m 764 S 0.0 4.3 0:01.75 /usr/sbin/clamd 4228 mysql 15 0 356m 53m 3904 S 24.0 1.8 5:42.20 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mys 2010/4/13 Hakan Koseoglu ha...@koseoglu.org Cahit, 2010/4/13 cahit Eyigünlü cahit.eyigu...@gmail.com: My server returning an error sth. like swap = 0 then locking httpd and all Set up a monitoring tool like sar etc. or my favourite, nmon with capacity planning. Depending on what those 4k users are doing, you might be running out of RAM + swap space until the out-of-memory killer kicks in and frees up some space by killing some processes. You should be able to see that activity in the message logfile. -- Hakan (m1fcj) - http://www.hititgunesi.org ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] VPN
is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else thank you very much i am glad for all your help i will rent a new server after complete a working system on virtual machine thanks .. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
Unfotunately i have to solve this based on software i need to isolate each company to protect their info from others i have 3 companies and last one thing i need to see each company's traffic statics for long time periods. and i need to be able to limit their traffics that is all , but as i see on open vpn i could not group users.i have a cisco router which i could see the traffic of my servers external ip addresses so i decide to see them from there via giving each company one external ip to connect to internet . but i could not decide yet how to do it :) is there any body have an advice for me ? 2010/4/10 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip I am not sure what you mean by 'routed to one of your external ip addresses'. so, you are at a third site, and want a tunnel to both companies networks? btw, I know those are just example addresses, but 11.x.x.x is not a reserved network instead, that should be 10.1.0.xxx or something. i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else assuming its a routing that makes logical sense, it should be easy to implement with OpenVPN. you'd need a firewall running openvpn at each of those companies then your end could inititate the connections to each of them. I'm not sure why you'd have to use two internet addresses at your end, rather, you'd just have an net like 10.2.0.xxx and the VPN tunnels would route between those networks. I'm assuming company 1 and company 2 don't want any direct routing between them, so you'd have to make sure you're not providing that route (eg, 10.0.0.xxx should not have a route to 10.1.0.xxx or visa versa) as far as 'better'? better is what you or the people who will be administrating this is most familar with. often, easiest is to use VPN appliance routers, like watchguards, or netscreens as the firewalls at all these sites. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
I will check this out thank you so much 2010/4/10 Eero Volotinen eero.voloti...@iki.fi 2010/4/10 cahit Eyigünlü cahit.eyigu...@gmail.com: Unfotunately i have to solve this based on software i need to isolate each company to protect their info from others i have 3 companies and last one thing i need to see each company's traffic statics for long time periods. and i need to be able to limit their traffics that is all , but as i see on open vpn i could not group users.i have a cisco router which i could see the traffic of my servers external ip addresses so i decide to see them from there via giving each company one external ip to connect to internet . but i could not decide yet how to do it :) is there any body have an advice for me ? 2010/4/10 John R Pierce pie...@hogranch.com Solution is static routing tables and openvpn site-to-site tunnel. -- Eero, RHCE ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
i am looking to open vpn remote page now do you know where could i set client's sites that allow to connect or not ? 10 Nisan 2010 13:36 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: I will check this out thank you so much 2010/4/10 Eero Volotinen eero.voloti...@iki.fi 2010/4/10 cahit Eyigünlü cahit.eyigu...@gmail.com: Unfotunately i have to solve this based on software i need to isolate each company to protect their info from others i have 3 companies and last one thing i need to see each company's traffic statics for long time periods. and i need to be able to limit their traffics that is all , but as i see on open vpn i could not group users.i have a cisco router which i could see the traffic of my servers external ip addresses so i decide to see them from there via giving each company one external ip to connect to internet . but i could not decide yet how to do it :) is there any body have an advice for me ? 2010/4/10 John R Pierce pie...@hogranch.com Solution is static routing tables and openvpn site-to-site tunnel. -- Eero, RHCE ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
yes exactly that is what i need to do murrayei could you describe a little more 2010/4/10 Ian Murray murra...@yahoo.co.uk i am looking to open vpn remote page now do you know where could i set client's sites that allow to connect or not ? I can't remember if there are other controls, but AFAIK the primary method of saying who is allowed is via certificates that you create when setting it up. It is still unclear to me what you are trying to achieve. Is it that you have three sites... A - B - C where - represents the VPN link? Is it that A needs to talk to B, B to C, but you don't want A to talk to C? If that is the case, I think it needs to be solved with a combination of VPN's as described and Iptables to stop the A to C conversation.. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
i mis understood sorry A B and C are companies not alone computers and they have client computers 2010/4/10 Ian Murray murra...@yahoo.co.uk yes exactly that is what i need to do murrayei could you describe a little more If 'B' in my previous description is a single machine, need not route and the A to C issue goes away. My OpenVPN/Iptables skills are not strong enough to describe it in general terms and has been previously stated, you are better off going through the support channels of OpenVPN, rather than CentOS. If simple firewalling using Iptables is a new or a difficult concept, then you might want to get some hands-on help, as was also suggested. To answer your original question, though, I wouldn't know where to start to solve restriction of A to C using Windows, whereas I am pretty sure you will have all the tools you need under CentOS/OpenVPN... for free. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] pkcs11-helper-devel is needed
how could i install pkcs11 on 64 cent os 5.4 :S it always asking me for pkcs11-helper but i've already installing [r...@vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarı: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64 [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-1.07-5.3.src.rpm uyarı: pkcs11-helper-1.07-5.3.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 3dbdc284 1:pkcs11-helper ### [100%] [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarı: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] pkcs11-helper-devel is needed
still the same :( [r...@vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [r...@vpn VpnSetup]# dir = lzo-devel-2.02-3.el5.kb.i386.rpm pkcs11-helper-1.06.tar.bz2.1 libopenssl-devel-0.9.8k-3.4_3.7.1.x86_64.delta.rpm lzo-devel-2.02-3.el5.kb.i386.rpm.1 pkcs11-helper-1.06.tgz libopenssl-devel-0.9.8m-1.2.i586.rpm lzo-devel-2.02-3.el5.kb.x86_64.rpm.html pkcs11-helper-1.07-5.3.src.rpm lzo-1.08-4.2.el5.rf.x86_64.rpm minilzo-2.03.tar.gz pkcs11-helper-1.07.tar.bz2 lzo-1.08-4.rf.src.rpm openssl-1.0.0.tar.gz pkcs11-helper-devel-1.06-2.1.x86_64.rpm lzo-devel-1.08-2.el4.i386.rpm openvpn-2.1.1 rpm-3.0.6-4.i386.rpm lzo-devel-1.08-4.1.el3.rf.i386.rpm openvpn-2.1.1.tar.gz lzo-devel-1.08-4.2.el5.rf.x86_64.rpm pkcs11-helper-1.06.tar.bz2 i think 2010/4/10 Agile Aspect agile.asp...@gmail.com 2010/4/10 cahit Eyigünlü cahit.eyigu...@gmail.com: how could i install pkcs11 on 64 cent os 5.4 :S it always asking me for pkcs11-helper but i've already installing [r...@vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarı: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64 [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-1.07-5.3.src.rpm uyarı: pkcs11-helper-1.07-5.3.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 3dbdc284 1:pkcs11-helper ### [100%] [r...@vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyarı: pkcs11-helper-devel-1.06-2.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 849bf240 hata: Failed dependencies: pkcs11-helper = 1.06 is needed by pkcs11-helper-devel-1.06-2.1.x86_64 libopenssl-devel is needed by pkcs11-helper-devel-1.06-2.1.x86_64 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos And you may need to install openssl-devel. -- Enjoy global warming while it lasts. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] VPN
Thank you so much 2010/4/10 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: yes exactly that is what i need to do murrayei could you describe a little more you either need to learn wide area networking principles as well as the ins and outs of VPN software, so you can solve these problems yourself, or hire someone so qualified if you want specific solutions. over and over again, you are asking this list to solve your business problems, for which you are presumably being paid. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] pkcs11-helper-devel is needed
Hello les ; login as: root [r...@vpn ~]# yum install openvpn Loaded plugins: fastestmirror Determining fastest mirrors * addons: ftp.plusline.de * base: ftp.plusline.de * extras: ftp.plusline.de * updates: ftp.plusline.de addons | 951 B 00:00 addons/primary | 203 B 00:00 base | 2.1 kB 00:00 base/primary_db | 2.0 MB 00:00 extras | 2.1 kB 00:00 extras/primary_db| 206 kB 00:00 updates | 1.9 kB 00:00 updates/primary_db | 760 kB 00:00 Setting up Install Process No package openvpn available. Nothing to do [r...@vpn ~]# 2010/4/10 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: still the same :( [r...@vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [r...@vpn VpnSetup]# dir = lzo-devel-2.02-3.el5.kb.i386.rpm pkcs11-helper-1.06.tar.bz2.1 libopenssl-devel-0.9.8k-3.4_3.7.1.x86_64.delta.rpm lzo-devel-2.02-3.el5.kb.i386.rpm.1 pkcs11-helper-1.06.tgz libopenssl-devel-0.9.8m-1.2.i586.rpm lzo-devel-2.02-3.el5.kb.x86_64.rpm.html pkcs11-helper-1.07-5.3.src.rpm lzo-1.08-4.2.el5.rf.x86_64.rpm minilzo-2.03.tar.gz pkcs11-helper-1.07.tar.bz2 lzo-1.08-4.rf.src.rpm openssl-1.0.0.tar.gz pkcs11-helper-devel-1.06-2.1.x86_64.rpm lzo-devel-1.08-2.el4.i386.rpm openvpn-2.1.1rpm-3.0.6-4.i386.rpm lzo-devel-1.08-4.1.el3.rf.i386.rpm openvpn-2.1.1.tar.gz lzo-devel-1.08-4.2.el5.rf.x86_64.rpm pkcs11-helper-1.06.tar.bz2 i think What are you trying to accomplish here? It looks like you are mixing a horrible mess of rpms from different repositories and source tarballs. If you just want openvpn, set up yum to use the EPEL repository, yum install openvpn and you are done. Generally speaking, you can use yum with one (and only one) 3rd party repository without a lot of trouble and it will take care of all dependencies. If you start mixing things from different 3rd party repos you will run into many dependency problems but it is still usually easier to work around them than to build source tarballs and keep them up to date yourself. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] pkcs11-helper-devel is needed
this three line returned error all the others ok : yum install lzo make make install 2010/4/10 Agile Aspect agile.asp...@gmail.com 2010/4/10 cahit Eyigünlü cahit.eyigu...@gmail.com: still the same :( And why would anything change? All you did was show us the same command again which failed the first time. Binaries setting in a directory are worthless. Since you're clueless, don't use rpmbuild. Last try yum remove pkcs11\* yum install lzo yum install openssl-devel tar xzf openvpn-2.1.1.tar.gz cd openvpn-2.1.1 ./configure --prefix=/usr make make install -- Enjoy global warming while it lasts. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] change owner
That worked thanks 2010/4/4 Ryan Wagoner rswago...@gmail.com Do an ls -lha public_html in the user's folder and look what group the files are owned by. Then do chown username:group -R public_html. Ryan 2010/4/2 cahit Eyigünlü cahit.eyigu...@gmail.com: the main problem that i have copied files directly to public_html folder and it is returnin 500 internal error now , and i need to allow the web user of this folder to read write content of this folder 2010/4/3 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : do you mean that for example a folder of root will be owned by chown -R root: /path/* I think it would be wise to read some basic *nix documentation. Something like : * Linux Cookbook (Carla Schroder) * Definitive Guide to CentOS * Foundations of CentOS * Red Hat Enterprise Linux 5 Administration It's not much use trying to fly a plane by pushing all the buttons and see what they do. This advice is meant in a friendly way. Cheers, Niki ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] encoding
Thank you for feed back but there is sth. complicated then using ascii characters let me try to describe : i have created a folder with name şiğüı and it is ok. but i have copied a file that i 've created on another linux machine (that is not mine) it seems like � and that cause to not only file name it also encounters on all hosted site which is copied from other server but this names seems ok on terminal , it only seems like on the web pages and the contents of this files seems like this , but if i rewrite the page with the same non latin chars , everything is ok. i have try to change httpd.conf page encodings , php settings .. do you have any advice please. i want to learn and share my knowladge like you in the future Kai i am reasearching always ... thanks for your understanding, reading all your posts on group to learn. thanks 2010/4/3 Kai Schaetzl mailli...@conactive.com google about encoding, MySQL, utf-8. so how could i repair this copied fle names end file encodings because it has problems also while reading by php and publishing the same thanks That's why it is a bad idea to use anything other than ASCII in filenames that are used for web servers or programming. New users of CentOS, especially if new to Linux at all, have a habit of throwing *every* problem they have on the new system at the list. This is ok for a while and if not stretching the CentOS relationship too much. But, finally, please understand that this list is not a general purpose solve my server problems list. So, please consider next time if your question has anything to do with CentOS. Kai -- Get your web at Conactive Internet Services: http://www.conactive.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] encoding
yes we try all this , beside this as i said if i create the folder on my own server there is no problem with non latin chars or th files which include non latin chars. this only encounters if i copy it from another source and the given solutions not worked unfortunatelly. for example cpanel's file manager shows fle list and it returns me file list like this �.html ���.html (file coming from other server) şiğü.html (file that i created) and when i open this files from browser şiğü.html this file show all content correctly with non latin chars but the others not 2010/4/4 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : i have created a folder with name şiğüı and it is ok. Ah, yes, one other thing. Folders named 'şiğüı' are *not* ok on a website. Don't use special characters in folder or file names on a webserver, or you're asking for trouble. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] copy source of ftp
how could i copy all content of a ftp directory from ftp via console to cent os 5.4 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] copy source of ftp
cent os could not find ncftpget command i tryed yum install ncftpget but not found it also 2010/4/2 Athmane Madjoudj athma...@gmail.com try to use ncftp Eg: ncftpget -R -v -u ftpuser ftp.server ~/localdir /remotedir 2010/4/2 cahit Eyigünlü cahit.eyigu...@gmail.com: how could i copy all content of a ftp directory from ftp via console to cent os 5.4 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Athmane Madjoudj ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] copy source of ftp
yes it works now thanks 2010/4/2 Barry Brimer li...@brimer.org how could i copy all content of a ftp directory from ftp via console to cent os 5.4 lftp (which is a part of CentOS) can do this with the mirror option and -R. man lftp for more info. Barry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] copy source of ftp
but on other server content is under httpdocs folder so i said /local/mine/folder /httpdocs then it create a httpdocs under /folder :) so how could i now cut all content and paste to up folder i mean from /folder/httpdocs to /folder :) 02 Nisan 2010 21:15 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: yes it works now thanks 2010/4/2 Barry Brimer li...@brimer.org how could i copy all content of a ftp directory from ftp via console to cent os 5.4 lftp (which is a part of CentOS) can do this with the mirror option and -R. man lftp for more info. Barry ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] copy source of ftp
i am not using gui :) 2010/4/2 JohnS jse...@gmail.com On Fri, 2010-04-02 at 21:20 +0300, cahit Eyigünlü wrote: but on other server content is under httpdocs folder so i said /local/mine/folder /httpdocs then it create a httpdocs under /folder :) so how could i now cut all content and paste to up folder i mean from /folder/httpdocs to /folder :) --- Yea that is a pita with lftp. Adjust your lftp commnd or see man cp man lftp then look at the mirror option in it. If using the GUI you ca cut and paste. John ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] copy source of ftp
Thanks to every one all solutions was perfect 2010/4/2 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: how could i copy all content of a ftp directory from ftp via console to cent os 5.4 wget --mirror ftp://source_location -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] change owner
i have downloaded files with root to a user's folder but now he is not able to delete some of them because owner is root how could i change the owner of all folders and subfolders and files under a directory ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] change owner
which is user name :) 2010/4/2 Clive Hills discordia...@gmail.com The command you want is chown : read man chown. Clive ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] change owner
thanks 2010/4/3 Paul Stuffins dephe...@fsirc.net 2010/4/2 cahit Eyigünlü cahit.eyigu...@gmail.com: which is user name :) 2010/4/2 Clive Hills discordia...@gmail.com The command you want is chown : read man chown. Clive ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos chown --help will also help you ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] change owner
do you mean that for example a folder of root will be owned by chown -R root: /path/* 2010/4/3 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : thanks # chown -R youruser:youruser /path/to/your/downloaded/files ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] change owner
the main problem that i have copied files directly to public_html folder and it is returnin 500 internal error now , and i need to allow the web user of this folder to read write content of this folder 2010/4/3 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : do you mean that for example a folder of root will be owned by chown -R root: /path/* I think it would be wise to read some basic *nix documentation. Something like : * Linux Cookbook (Carla Schroder) * Definitive Guide to CentOS * Foundations of CentOS * Red Hat Enterprise Linux 5 Administration It's not much use trying to fly a plane by pushing all the buttons and see what they do. This advice is meant in a friendly way. Cheers, Niki ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] very strange
i have 2 servers in a datacenter and each of them has 2 virtual machines one is linux the other is windows of wirtual machines. when i want to transfer my ip addresses between theese servers , for ex: let me say main server 1' guest windows : A main server 1' guest CentOs: B main server 2' guest windows : C main server 1' guest CentOs: D when i handle an ip of any computers ip in network from A or C it directly handles, no matter where the ip routed from cisco router :D but when i want to handle any computers ip in network from B or D it never get the ip from other source :D how this could happen :) ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] remove openssl
Thanks. 2010/3/29 Eero Volotinen eero.voloti...@iki.fi 2010/3/29 cahit Eyigünlü cahit.eyigu...@gmail.com: i am trying to install plesk but my cent os has a newer version of open ssl that is why my setup is interrupting, how could i remove open ssl ? i tryed yum remove openssl but it encounter lots of errors i want to remove only the open ssl not the related files like wget networkmanager ... well, you can't do that without breaking the your centos installation. -- Eero ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] remove openssl
wow :) that is good thanks 2010/3/29 Kahlil Hodgson kahlil.hodg...@dealmax.com.au On 03/29/2010 05:38 PM, Eero Volotinen wrote: 2010/3/29 cahit Eyigünlü cahit.eyigu...@gmail.com: i am trying to install plesk but my cent os has a newer version of open ssl that is why my setup is interrupting, how could i remove open ssl ? i tryed yum remove openssl but it encounter lots of errors i want to remove only the open ssl not the related files like wget networkmanager ... well, you can't do that without breaking the your centos installation. you could try yum downgrade openssl-X.Y.Z-W to downgrade to an earlier version which _may_ keep the rest of your installation happy. you can look for earlier version with yum --showduplicates list openssl downgrading openssl may make things less secure though YMMV. Kal ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
i am reaching the network with this : route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 route add default gw 217.20.117.1 i have added eth0 address0=217.20.117.1 subnet0=255.255.255.255 the first command is ok but how could i set the second command to cent os to do it automatically 2010/3/29 Niki Kovacs cont...@kikinovak.net cahit Eyigünlü a écrit : there is sth. different on my network my gateway is on different subnet then my static ip so is this works? One of the fundamentals of networking - as explained to you a few posts ago - is that your gateway has to be on the same subnet than your IP, or how else could you possibly reach it? Cheers, Niki Kovacs ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could not complete is default gateway setting and my netstat table must looklike this : Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw 2010/3/29 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: i am reaching the network with this : route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 route add default gw 217.20.117.1 i have added eth0 address0=217.20.117.1 subnet0=255.255.255.255 the first command is ok but how could i set the second command to cent os to do it automatically If you create a file named /etc/sysconfig/network-scripts/route-eth0 you can put lines in it that will have 'ip route' added at the beginning and executed after the interface is up. ip route takes some different arguments than the route command - see man ip for details. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
there is no problem with my internet connection i just want that to do this cent os automatically : route add default gw 217.20.117.1 before typing this my netstat -rn looks like this : r...@lin3 [~]# netstat -rn (that is not able to connect to internet) Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 after adding gateway : (this works perfect) r...@lin3 [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 *0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 * i just want to add bold line automatically and this is my ifconfig : r...@lin3 [~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:83:21:44 inet addr:188.72.255.189 Bcast:188.72.255.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:2144/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9653 errors:0 dropped:0 overruns:0 frame:0 TX packets:458 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:876648 (856.1 KiB) TX bytes:50814 (49.6 KiB) Base address:0x2000 Memory:d892-d894 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:483 errors:0 dropped:0 overruns:0 frame:0 TX packets:483 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:75305 (73.5 KiB) TX bytes:75305 (73.5 KiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) 2010/3/29 Matt Iavarone matt.iavar...@gmail.com 2010/3/29 cahit Eyigünlü cahit.eyigu...@gmail.com: This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could not complete is default gateway setting and my netstat table must looklike this : Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw 2010/3/29 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: i am reaching the network with this : route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 route add default gw 217.20.117.1 i have added eth0 address0=217.20.117.1 subnet0=255.255.255.255 the first command is ok but how could i set the second command to cent os to do it automatically If you create a file named /etc/sysconfig/network-scripts/route-eth0 you can put lines in it that will have 'ip route' added at the beginning and executed after the interface is up. ip route takes some different arguments than the route command - see man ip for details. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos Why don't you post the results of 'ifconfig -a' and 'ip route show'? Giving information piecemeal is not helping anyone. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
Thanks rohan but our gateway on 24 ip block so i need to do it on way that i send , unortunately this wont work becuase that is a global ip adress and they can not set a gateway for each 255 block for ex. i have 5 more ip 2 of them is on 78.159.xx.xx block so i need to set default gw to 217.20.117.1 2010/3/29 Rohan Gilchrist ro...@gilchrist.me So you're saying that your default gateway is an IP address that's part of a *different* network/subnet? I don't know how this network has been designed, but typically I would expect that your default gateway would be something like 188.72.255.1 rather than 217.20.117.1 that you've mentioned earlier. Take a look at mine for example: [~]ifconfig eth0 Link encap:Ethernet HWaddr FE:FD:6D:4A:C1:69 inet addr:109.xx.xxx.105 Bcast:109.74.193.255 Mask:255.255.255.0 inet6 addr: fe80::fcfd:6dff:fe4a:c169/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:78742 errors:0 dropped:0 overruns:0 frame:0 TX packets:67114 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35442733 (33.8 MiB) TX bytes:12607832 (12.0 MiB) loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8292 errors:0 dropped:0 overruns:0 frame:0 TX packets:8292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1195297 (1.1 MiB) TX bytes:1195297 (1.1 MiB) [~]netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 109.xx.xxx.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 109.xx.xxx.10.0.0.0 UG0 0 0 eth0 So you can see my host has .105 assigned to eth0, and the default gateway is .1 of the same network/subnet. You might want to check that your addressing is correct. On Mon, 29 Mar 2010, cahit Eyig?nl? wrote: there is no problem with my internet connection i just want that to do this cent os automatically :route add default gw 217.20.117.1 before typing this my netstat -rn looks like this : r...@lin3 [~]# netstat -rn (that is not able to connect to internet) Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 after adding gateway : (this works perfect) r...@lin3 [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 i just want to add bold line automatically and this is my ifconfig : r...@lin3 [~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:83:21:44 inet addr:188.72.255.189 Bcast:188.72.255.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:2144/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9653 errors:0 dropped:0 overruns:0 frame:0 TX packets:458 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:876648 (856.1 KiB) TX bytes:50814 (49.6 KiB) Base address:0x2000 Memory:d892-d894 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:483 errors:0 dropped:0 overruns:0 frame:0 TX packets:483 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:75305 (73.5 KiB) TX bytes:75305 (73.5 KiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) 2010/3/29 Matt Iavarone matt.iavar...@gmail.com 2010/3/29 cahit Eyig?nl? cahit.eyigu...@gmail.com: This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could
Re: [CentOS] Forgetting network settings
GATEWAY1=217.20.117.1 that does not worked 2010/3/29 Les Mikesell lesmikes...@gmail.com On 3/29/2010 8:09 AM, cahit Eyigünlü wrote: This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could not complete is default gateway setting and my netstat table must looklike this : Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw If you want to use that syntax, you can probably add: GATEWAY1=217.20.117.1 NETMASK1=0.0.0.0 ADDRESS1=0.0.0.0 Or this should work instead: default via 217.20.117.1 dev eth0 But, I'd consider looking for a different service provider that does networking in a more standard way. If they have to overlay subnets, they could at least assign an IP within each one on the gateway device so a standard configuration would be able to reach it. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
it seems like a good solution but i could not figure out how to make this :D 2010/3/29 Les Mikesell lesmikes...@gmail.com On 3/29/2010 10:50 AM, cahit Eyigünlü wrote: GATEWAY1=217.20.117.1 that does not worked Did you add those lines after the ones you said had worked to give you the host route to 217.20.117.1? You can't add a gateway until you have a route to it. What about the alternative I suggested of: default via 217.20.117.1 dev eth0 You may have to wade through the /etc/sysconfig/network-scripts/ifup-routes script to figure out the right syntax. (And maybe you can't mix the different syntaxes in the same file...). -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] Forgetting network settings
i am adding routr options with route add -net xxx dev eth0 but when i reset computer it is not in netstat table anymore ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
I am new on this group :D 2010/3/29 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: i am adding routr options with route add -net xxx dev eth0 but when i reset computer it is not in netstat table anymore yes, the route command is not persistent. someone explained many posts ago what files to edit to add permanent settings. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] Forgetting network settings
there is sth. different on my network my gateway is on different subnet then my static ip so is this works? 2010/3/29 Matt Iavarone matt.iavar...@gmail.com 2010/3/28 cahit Eyigünlü cahit.eyigu...@gmail.com: i am adding routr options with route add -net xxx dev eth0 but when i reset computer it is not in netstat table anymore ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos As someone mentioned, check route-ethx. It's handy to look through the ifup/ifdown scripts to see what goes on when you start your network. -Matt Iavarone ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] remove openssl
i am trying to install plesk but my cent os has a newer version of open ssl that is why my setup is interrupting, how could i remove open ssl ? i tryed yum remove openssl but it encounter lots of errors i want to remove only the open ssl not the related files like wget networkmanager ... ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
[CentOS] need help
Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 Sub net 255.255.255.0 this settings works on fedora 12 perfect but on centos ubuntu freebsd or fedora core it is not working but on all this systems i am able to use nat, i have installed linux again and again thousands of time the given result from centos 5.4 Also as you could see there is no gateway of me on the route table Thanks for your help [r...@lin3 ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:0E:CD:B0 inet addr:188.72.xxx.189 Bcast:188.72.xxx.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe0e:cdb0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1168 errors:0 dropped:0 overruns:0 frame:0 TX packets:63 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97464 (95.1 KiB) TX bytes:11603 (11.3 KiB) Base address:0x2000 Memory:d894-d896 eth1 Link encap:Ethernet HWaddr 00:0C:29:0E:CD:BA inet addr:192.168.130.133 Bcast:192.168.130.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe0e:cdba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2068 (2.0 KiB) TX bytes:15191 (14.8 KiB) Base address:0x2080 Memory:d896-d898 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8281 errors:0 dropped:0 overruns:0 frame:0 TX packets:8281 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4840628 (4.6 MiB) TX bytes:4840628 (4.6 MiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) [r...@lin3 ~]# route -n Kernel IP routing table *Destination Gateway Genmask Flags Metric RefUse Iface* *192.168.130.0 0.0.0.0 255.255.255.0 U 1 00 eth1* *188.72.xxx.00.0.0.0 255.255.255.0 U 1 00 eth0* [r...@lin3 ~]# service network restart Bridged arabirimi durduruluyor:[ TAMAM ] Nat arabirimi durduruluyor:[ TAMAM ] loopback arayüzü durduruluyor: [ TAMAM ] loopback arayüzü etkinleştiriliyor:[ TAMAM ] *Bridged arayüzü etkinleştiriliyor: RTNETLINK answers: Network is unreachable* [ TAMAM ] Nat arayüzü etkinleştiriliyor: eth1 için IP bilgisi saptanıyor... bitti. [ TAMAM ] [r...@lin3 ~]# ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
please check the attachments fedora is working with the properties given, and nat is working also on cent os but bridged is not working i tryed Eero what you write but still netstat -rn is same and i could not ping my gateway 2010/3/27 Eero Volotinen eero.voloti...@iki.fi 2010/3/27 cahit Eyigünlü cahit.eyigu...@gmail.com: Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 Sub net 255.255.255.0 this settings works on fedora 12 perfect but on centos ubuntu freebsd or fedora core it is not working but on all this systems i am able to use nat, i have installed linux again and again thousands of time the given result from centos 5.4 echo GATEWAY=217.20.xxx.1 /etc/sysconfig/network -- Eero -- Eero ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos login as: root r...@78.159.97.15's password: Last login: Sat Mar 27 02:46:19 2010 from 212.253.233.143 r...@lin [~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:27:73:A8 inet addr:78.159.97.15 Bcast:78.159.97.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe27:73a8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33341414 errors:2409 dropped:5344 overruns:0 frame:0 TX packets:22285968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:479420277 (457.2 MiB) TX bytes:3286848027 (3.0 GiB) Interrupt:19 Base address:0x2000 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:216475 errors:0 dropped:0 overruns:0 frame:0 TX packets:216475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42560827 (40.5 MiB) TX bytes:42560827 (40.5 MiB) r...@lin [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 78.159.97.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 [r...@lin2 ~]# service network restart eth0 arabirimi durduruluyor: [ TAMAM ] Geridönüþ arayüzü durduruluyor:[ TAMAM ] Að parametreleri ayarlanýyor: [ TAMAM ] Geridönüþ arayüzü etkinleþtiriliyor: [ TAMAM ] eth0 arayüzü etkinleþtiriliyor:[ TAMAM ] [r...@lin2 ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:20:C0:28 inet addr:188.72.255.190 Bcast:188.72.255.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe20:c028/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1109 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:83430 (81.4 KiB) TX bytes:1652 (1.6 KiB) Interrupt:193 Base address:0x2024 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2884 errors:0 dropped:0 overruns:0 frame:0 TX packets:2884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4985288 (4.7 MiB) TX bytes:4985288 (4.7 MiB) [r...@lin2 ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 [r...@lin2 ~]# ping 217.20.117.1 connect: Network is unreachable r...@lin2 ~]# service network restart eth0 arabirimi durduruluyor: [ TAMAM ] Geridönüþ arayüzü durduruluyor:[ TAMAM ] Að parametreleri ayarlanýyor: [ TAMAM ] Geridönüþ arayüzü etkinleþtiriliyor: [ TAMAM ] eth0 arayüzü etkinleþtiriliyor:[ TAMAM ] [r...@lin2 ~]# ifconfig eth0 Link encap:Ethernet
Re: [CentOS] need help
check fedora's txt i've send it is working perfect my gateway : 217.20.117.1 my ip 188.72.255.289 subnet 255.255.255.0 fedora 12 is working when i set ip directly but any other linux dist is not :( please i need help :( 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 there's something you're not telling us here, as the gateway has to be reachable via a network, and 217.20.xxx.1 is not part of either network shown in your route or ifconfig output. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
did you get the attachment i am adding again , 188.72.255.189 already added but there is sth. different with fedora which is working with bridged connection esppecially gateway, beside this i could not ping my own gateway there are 4 other windows machines and all of them working perfect 2010/3/27 Eero Volotinen eero.voloti...@iki.fi 2010/3/27 cahit Eyigünlü cahit.eyigu...@gmail.com: check fedora's txt i've send it is working perfect my gateway : 217.20.117.1 my ip 188.72.255.289 subnet 255.255.255.0 fedora 12 is working when i set ip directly but any other linux dist is not :( please i need help :( maybe you need to run something like route add -host 188.72.255.289, but it's uncommon that gateway is not in the same net.. -- Eero ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos login as: root r...@78.159.97.15's password: Last login: Sat Mar 27 02:46:19 2010 from 212.253.233.143 r...@lin [~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:27:73:A8 inet addr:78.159.97.15 Bcast:78.159.97.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe27:73a8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33341414 errors:2409 dropped:5344 overruns:0 frame:0 TX packets:22285968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:479420277 (457.2 MiB) TX bytes:3286848027 (3.0 GiB) Interrupt:19 Base address:0x2000 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:216475 errors:0 dropped:0 overruns:0 frame:0 TX packets:216475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42560827 (40.5 MiB) TX bytes:42560827 (40.5 MiB) r...@lin [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 78.159.97.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 [r...@lin2 ~]# service network restart eth0 arabirimi durduruluyor: [ TAMAM ] Geridönüþ arayüzü durduruluyor:[ TAMAM ] Að parametreleri ayarlanýyor: [ TAMAM ] Geridönüþ arayüzü etkinleþtiriliyor: [ TAMAM ] eth0 arayüzü etkinleþtiriliyor:[ TAMAM ] [r...@lin2 ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:20:C0:28 inet addr:188.72.255.190 Bcast:188.72.255.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe20:c028/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1109 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:83430 (81.4 KiB) TX bytes:1652 (1.6 KiB) Interrupt:193 Base address:0x2024 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2884 errors:0 dropped:0 overruns:0 frame:0 TX packets:2884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4985288 (4.7 MiB) TX bytes:4985288 (4.7 MiB) [r...@lin2 ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 [r...@lin2 ~]# ping 217.20.117.1 connect: Network is unreachable r...@lin2 ~]# service network restart eth0 arabirimi durduruluyor: [ TAMAM ] Geridönüþ arayüzü durduruluyor:[ TAMAM ] Að parametreleri ayarlanýyor: [ TAMAM ] Geridönüþ arayüzü etkinleþtiriliyor: [ TAMAM ] eth0 arayüzü etkinleþtiriliyor:[ TAMAM ] [r...@lin2 ~]# ifconfig eth0
Re: [CentOS] need help
This is fedora's route table : r...@lin [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 78.159.97.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and this is cent os which is not working : [r...@lin2 ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 [r...@lin2 ~]# ping 217.20.117.1 connect: Network is unreachable 2010/3/27 Robert Heller hel...@deepsoft.com At Sat, 27 Mar 2010 20:54:04 +0200 CentOS mailing list centos@centos.org wrote: check fedora's txt i've send it is working perfect my gateway : 217.20.117.1 my ip 188.72.255.289 subnet 255.255.255.0 fedora 12 is working when i set ip directly but any other linux dist is not :( please i need help :( Can you log into your fedora box and type this command at a shell prompt: netstat -r Copy and paste the results into an E-Mail message to this list. 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 there's something you're not telling us here, as the gateway has to be reachable via a network, and 217.20.xxx.1 is not part of either network shown in your route or ifconfig output. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos MIME-Version: 1.0 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Robert Heller -- 978-544-6933 Deepwoods Software-- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows hel...@deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
it was 188.72.255.189 i wrote wrong with 289 sorry 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: did you get the attachment i am adding again , 188.72.255.189 already added but there is sth. different with fedora which is working with bridged connection esppecially gateway, beside this i could not ping my own gateway there are 4 other windows machines and all of them working perfect I'm not reading your attachments, frankly, I'm surprised the mail list server didn't strip them as attachments are frowned upon on email lists. now you're saying you have a bridged connection to? whats being bridged? is there anything else you're not telling us about? the network as given in the body of your emails is an illegal configuration ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
Fedora 12 designed automatically and i need same settings because centos is in the same machine with fedora under vmware ... the only one difference is fedora's ip address 78.159.97.xx and centos is 188.72.255.189 everything else same 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: This is fedora's route table : r...@lin [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 78.159.97.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and this is cent os which is not working : [r...@lin2 ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 [r...@lin2 ~]# ping 217.20.117.1 connect: Network is unreachable fedora's eth0 has an unconventional route to the gateway via eth0 (the first line) this is an odd network, i see like 4 different subnets all mashed up on the same physical network segment? who designed this? surely not someone with a proper network engineering background.. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
i tryed this : [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 the answer siocaddrt : network is unreachable 2010/3/27 Robert Heller hel...@deepsoft.com At Sat, 27 Mar 2010 21:07:49 +0200 CentOS mailing list centos@centos.org wrote: This is fedora's route table : r...@lin [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.10.0.0.0 255.255.255.255 UH0 0 0 eth0 78.159.97.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.10.0.0.0 UG0 0 0 eth0 and this is cent os which is not working : [r...@lin2 ~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 188.72.255.00.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 [r...@lin2 ~]# ping 217.20.117.1 connect: Network is unreachable Manual setup: [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 [r...@lin2 ~]# route add host 217.20.117.1 netmask 255.255.255.255 dev eth0 Automagical setup: [r...@lin2 ~]# cat /etc/sysconfig/network-scripts/route-eth0 ADDRESS0=217.20.117.1 NETMASK0=255.255.255.255 EOF [r...@lin2 ~]# cat /etc/sysconfig/network EOF GATEWAY=217.20.117.1 EOF The *assumes* that the network (switch or router box) that eth0 is connected to also has 217.20.117.1 connected to it. Typically a router 'box' contains both the router and a ethernet switch: a 'pure' router would only have two ethernet jacks, one for each of the two networks the router routes between. Since there is no great demand to put a single machine on a network and since the switch hardware is dirt cheap and since no one does coax Ethernet anymore, modern router boxes include a switch in the 'inside' network. 2010/3/27 Robert Heller hel...@deepsoft.com At Sat, 27 Mar 2010 20:54:04 +0200 CentOS mailing list centos@centos.org wrote: check fedora's txt i've send it is working perfect my gateway : 217.20.117.1 my ip 188.72.255.289 subnet 255.255.255.0 fedora 12 is working when i set ip directly but any other linux dist is not :( please i need help :( Can you log into your fedora box and type this command at a shell prompt: netstat -r Copy and paste the results into an E-Mail message to this list. 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 there's something you're not telling us here, as the gateway has to be reachable via a network, and 217.20.xxx.1 is not part of either network shown in your route or ifconfig output. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos MIME-Version: 1.0 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Robert Heller -- 978-544-6933 Deepwoods Software-- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows hel...@deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos MIME-Version: 1.0 ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos -- Robert Heller -- 978-544-6933 Deepwoods Software-- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows hel...@deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/ ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
this is given by datacenter and 188.72.255.188 my webserver's static ip 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: Fedora 12 designed automatically and i need same settings because centos is in the same machine with fedora under vmware ... the only one difference is fedora's ip address 78.159.97.xx and centos is 188.72.255.189 everything else same why so many different network numbers on the same physical/virtual LAN segment ? and why doesn't each network have its own in-network gateway address ?setting it up this way is rather unconventional to say the least. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
i am newbee :( could you please write in order the routes must added for me ip 188.172.255.189 subnet 255.255.255.0 gateway 217.20.117.1 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: i tryed this : [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 the answer siocaddrt : network is unreachable Manual setup: [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 [r...@lin2 ~]# route add host 217.20.117.1 netmask 255.255.255.255 dev eth0 try adding the host first. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
i understand you the answer machine name could not resolved 27 Mart 2010 22:01 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: i am newbee :( could you please write in order the routes must added for me ip 188.172.255.189 subnet 255.255.255.0 gateway 217.20.117.1 2010/3/27 John R Pierce pie...@hogranch.com cahit Eyigünlü wrote: i tryed this : [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 the answer siocaddrt : network is unreachable Manual setup: [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 [r...@lin2 ~]# route add host 217.20.117.1 netmask 255.255.255.255 dev eth0 try adding the host first. ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
but how fedora works perfect also windows too 2010/3/27 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: this is given by datacenter and 188.72.255.188 my webserver's static ip That doesn't make sense. They should give you a gateway address that is within the range of your own IP's netmask. If it works at all under any OS it must be because the gateway router is proxy-arp'ing for anything it can reach. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [CentOS] need help
it worked thankes every body i had a problem with activating network card :D [r...@lin2 ~]# route add default gw 217.20.117.1 dev eth0 [r...@lin2 ~]# route add host 217.20.117.1 netmask 255.255.255.255 dev eth0 that is solution 27 Mart 2010 22:50 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: but how fedora works perfect also windows too 2010/3/27 Les Mikesell lesmikes...@gmail.com cahit Eyigünlü wrote: this is given by datacenter and 188.72.255.188 my webserver's static ip That doesn't make sense. They should give you a gateway address that is within the range of your own IP's netmask. If it works at all under any OS it must be because the gateway router is proxy-arp'ing for anything it can reach. -- Les Mikesell lesmikes...@gmail.com ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Re: [oauth] Getting user credentials
Take a look at this please : Google's result : oauth_token=*1%2FJefQs9cHFI8Ha2e5YjdkU*woauth_token_secret=*%2B74EaiHRmJ%2B1dBGUOOYIQL4H* Authorization: OAuth oauth_version=1.0, oauth_nonce=58b600e9773540aafa65cb41b31238cf, oauth_timestamp=1259928326, oauth_consumer_key=*www.file4share.net*, oauth_token=*1%2FJefQs9cHFI8Ha2e5YjdkUw*, oauth_signature_method=HMAC-SHA1, oauth_signature=r%2B%2FoQx8Gjt1U5YW6FQd8aOahyhQ%3D Signature = 838Ix+wBPh/XBjdUbLkVNlB9KMs= when i use the bold red values i get the signature as given above but why :( if there is a problem with my function i won't be able to complete steps until here where could be the difference in your opinion? 2009/12/4 mat...@gmail mat...@gmail.com Failed to verify 3 legged OAuth request probably means your signature is invalid. Invalid consumer key means something different (ex. your consumer is not verified yet) I'm not good at .NET, but if your signature is same with that this ruby script generate, it should be OK. http://bit.ly/oauth-signature-checker On 2009/12/04, at 13:54, cahit Eyigünlü wrote: I verified the domain and also i tryed the same on the localo but no way i always get the same result Dim item As New OAuth.OAuthBase Dim returns Dim ts = item.GenerateTimeStamp Dim nonce = item.GenerateNonce Dim Sign = item.GenerateSignature(New Uri( http://www-opensocial.googleusercontent.com/api/people/@me/@self;), consumerKey, consumerSecret, Session(Token2), Session(SecretToken2), GET, ts, nonce, , returns) do you think is this create the right signature ? do you have any idea with vb ? 2009/12/4 mat...@gmail mat...@gmail.com The parameters seems OK. Then, it might be because your consumer's domain is not verified, or different with www.file4share.net. On 2009/12/04, at 13:20, cahit Eyigünlü wrote: With this information it is working on the google playground :( but i could not understand why it is telling me that 04 Aralık 2009 06:20 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: Dim scope As String = http://www-opensocial.googleusercontent.com/api/people/; Dim returnURL As String = http://www.file4share.net/Returns/Gmail.aspx; Dim RequestFrom As String = http://www-opensocial.googleusercontent.com/api/people/@me/@self; 2009/12/4 mat...@gmail mat...@gmail.com can you send the OAuth scope parameter you send when getting request token? it might not be Portable Contact API's one. the scope list is here, though I couldn't find any info about portable contact API's scope on google's documents :( http://googlecodesamples.com/oauth_playground/ On 2009/12/04, at 13:00, cahit Eyigünlü wrote: Sorry for second post sometimes also give this error : Failed to verify 3 legged OAuth request. Request was invalid.Invalid AuthSub token. but i use the Token that given on the last step :( 04 Aralık 2009 05:58 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key, no app specified : www.file4share.net but my application registered on : https://www.google.com/accounts/ManageDomain where could be the error do you have any idea? 2009/12/4 mat...@gmail mat...@gmail.com You are probably using OAuth1.0. Google probably support oauth_callback only which is set when you set up your consumer. You need to send oauth_callback when you get request token if you want use OAuth1.0a. OAuth had changed the timing of sending oauth_callback and added oauth_verifier. Check this document for the details. http://oauth.net/core/1.0a I'm not sure your library support 1.0a though. If not, use default oauth_callback which you set when you set up your consumer, and don't send oauth_verifier. On 2009/12/04, at 11:32, cahit Eyigünlü wrote: I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need
Re: [oauth] Getting user credentials
This is my base string : GEThttp%3A%2F%2Fwww-opensocial.googleusercontent.com %2Fapi%2Fpeople%2F%40me%2F%40selfoauth_consumer_key*%3Dwww.file4share.net %26*oauth_nonce*%3D58b600e9773540aafa65cb41b31238cf%26* oauth_signature_method*%3DHMAC-SHA1%26*oauth_timestamp*%3D1259928326%26* oauth_token*%3D1%252FJefQs9cHFI8Ha2e5YjdkUw%26*oauth_version*%3D*1.0 this is google's GEThttp%3A%2F%2Fwww-opensocial.googleusercontent.com%2Fapi%2Fpeople%2F%40me%2F%40selfoauth_consumer_key%3Dwww.file4share.net%26oauth_nonce%3D58b600e9773540aafa65cb41b31238cf%26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp%3D1259928326%26oauth_token%3D1%252FJefQs9cHFI8Ha2e5YjdkUw%26oauth_version%3D1.0 Both of same but generated signatures are different , the most interesting thing if my signature function is wrong how can i come to the this step ? i am really sure mine is right so what is wrong on my signature string , could you please write me in this step for generating signature is this right : url :http://www-opensocial.googleusercontent.com/api/people/@me/@self consumer key consumer secret second token string second token secret string method GET Time span Nonce is there any thing else or do i need to do any changes on this paramaters ? 2009/12/4 mat...@gmail mat...@gmail.com OK, then compare the signature base strings which each library builds. If they are same, the problem is probably in the library (Ruby or .NET? has a bug), so you should ask about the issue to library developer community. On 2009/12/04, at 21:12, cahit Eyigünlü wrote: Take a look at this please : Google's result : oauth_token=1%2FJefQs9cHFI8Ha2e5YjdkUwoauth_token_secret=%2B74EaiHRmJ%2B1dBGUOOYIQL4H Authorization: OAuth oauth_version=1.0, oauth_nonce=58b600e9773540aafa65cb41b31238cf, oauth_timestamp=1259928326, oauth_consumer_key=www.file4share.net, oauth_token=1%2FJefQs9cHFI8Ha2e5YjdkUw, oauth_signature_method=HMAC-SHA1, oauth_signature=r%2B%2FoQx8Gjt1U5YW6FQd8aOahyhQ%3D Signature = 838Ix+wBPh/XBjdUbLkVNlB9KMs= when i use the bold red values i get the signature as given above but why :( if there is a problem with my function i won't be able to complete steps until here where could be the difference in your opinion? 2009/12/4 mat...@gmail mat...@gmail.com Failed to verify 3 legged OAuth request probably means your signature is invalid. Invalid consumer key means something different (ex. your consumer is not verified yet) I'm not good at .NET, but if your signature is same with that this ruby script generate, it should be OK. http://bit.ly/oauth-signature-checker On 2009/12/04, at 13:54, cahit Eyigünlü wrote: I verified the domain and also i tryed the same on the localo but no way i always get the same result Dim item As New OAuth.OAuthBase Dim returns Dim ts = item.GenerateTimeStamp Dim nonce = item.GenerateNonce Dim Sign = item.GenerateSignature(New Uri( http://www-opensocial.googleusercontent.com/api/people/@me/@self;), consumerKey, consumerSecret, Session(Token2), Session(SecretToken2), GET, ts, nonce, , returns) do you think is this create the right signature ? do you have any idea with vb ? 2009/12/4 mat...@gmail mat...@gmail.com The parameters seems OK. Then, it might be because your consumer's domain is not verified, or different with www.file4share.net. On 2009/12/04, at 13:20, cahit Eyigünlü wrote: With this information it is working on the google playground :( but i could not understand why it is telling me that 04 Aralık 2009 06:20 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: Dim scope As String = http://www-opensocial.googleusercontent.com/api/people/; Dim returnURL As String = http://www.file4share.net/Returns/Gmail.aspx; Dim RequestFrom As String = http://www-opensocial.googleusercontent.com/api/people/@me/@self; 2009/12/4 mat...@gmail mat...@gmail.com can you send the OAuth scope parameter you send when getting request token? it might not be Portable Contact API's one. the scope list is here, though I couldn't find any info about portable contact API's scope on google's documents :( http://googlecodesamples.com/oauth_playground/ On 2009/12/04, at 13:00, cahit Eyigünlü wrote: Sorry for second post sometimes also give this error : Failed to verify 3 legged OAuth request. Request was invalid.Invalid AuthSub token. but i use the Token that given on the last step :( 04 Aralık 2009 05:58 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key
Re: [oauth] Getting user credentials
http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en.
Re: [oauth] Getting user credentials
I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en.
Re: [oauth] Getting user credentials
I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en.
Re: [oauth] Getting user credentials
I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key, no app specified : www.file4share.net but my application registered on : https://www.google.com/accounts/ManageDomain where could be the error do you have any idea? 2009/12/4 mat...@gmail mat...@gmail.com You are probably using OAuth1.0. Google probably support oauth_callback only which is set when you set up your consumer. You need to send oauth_callback when you get request token if you want use OAuth1.0a. OAuth had changed the timing of sending oauth_callback and added oauth_verifier. Check this document for the details. http://oauth.net/core/1.0a I'm not sure your library support 1.0a though. If not, use default oauth_callback which you set when you set up your consumer, and don't send oauth_verifier. On 2009/12/04, at 11:32, cahit Eyigünlü wrote: I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com
Re: [oauth] Getting user credentials
Sorry for second post sometimes also give this error : Failed to verify 3 legged OAuth request. Request was invalid.Invalid AuthSub token. but i use the Token that given on the last step :( 04 Aralık 2009 05:58 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.comyazdı: I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key, no app specified : www.file4share.net but my application registered on : https://www.google.com/accounts/ManageDomain where could be the error do you have any idea? 2009/12/4 mat...@gmail mat...@gmail.com You are probably using OAuth1.0. Google probably support oauth_callback only which is set when you set up your consumer. You need to send oauth_callback when you get request token if you want use OAuth1.0a. OAuth had changed the timing of sending oauth_callback and added oauth_verifier. Check this document for the details. http://oauth.net/core/1.0a I'm not sure your library support 1.0a though. If not, use default oauth_callback which you set when you set up your consumer, and don't send oauth_verifier. On 2009/12/04, at 11:32, cahit Eyigünlü wrote: I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com . For more options, visit this group at http
Re: [oauth] Re: How many consumer keys do I need?
Please try this three buttons in the given order on the page http://www.file4share.net/Returns/Gmail.aspx and on the last step it generates the request url but it will return you an error message :( 2009/12/4 Monis monisiq...@gmail.com How can a consumer key be generated for every user? if that is to be the case then when every user registers on one of your site, there has to be a consumer key/secret exchange between your site and the service provider. This can happen as well, but key/secret exchanges are generally a one time process and it would be insecure to perform this operation on every user registration. And secondly, it does not give any advantage. You already get all the security you need with your site acting as a single consumer. Where did you see this recommendation/implementation? can you please share the link because maybe I'm missing the motive behind it. Thanks, Monis On Dec 3, 9:04 pm, rob ganly robert.ga...@gmail.com wrote: hi guys, so i'm implementing oauth 1.0a (consumer and service) and have a hard- coded consumer_key and consumer_secret on the consumer side (in a config file). i was envisioning having one pair for each consumer (i.e. individual site/ application) that is to use the service as i've seen before. however i've also seen it suggested/implemented that each individual user (even coming from the same consumer) use their own unique consumer key, despite having their own unique user credentials. in the consumer table i have, that i adapted from an example, each consumer has one user id associated with it, whereas i would've imagined the relationship between consumer and user to be one to many. any ideas/pointers/clarification gratefully received! best, rob ganly -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en.
Re: [oauth] Getting user credentials
Dim scope As String = http://www-opensocial.googleusercontent.com/api/people/; Dim returnURL As String = http://www.file4share.net/Returns/Gmail.aspx; Dim RequestFrom As String = http://www-opensocial.googleusercontent.com/api/people/@me/@self; 2009/12/4 mat...@gmail mat...@gmail.com can you send the OAuth scope parameter you send when getting request token? it might not be Portable Contact API's one. the scope list is here, though I couldn't find any info about portable contact API's scope on google's documents :( http://googlecodesamples.com/oauth_playground/ On 2009/12/04, at 13:00, cahit Eyigünlü wrote: Sorry for second post sometimes also give this error : Failed to verify 3 legged OAuth request. Request was invalid.Invalid AuthSub token. but i use the Token that given on the last step :( 04 Aralık 2009 05:58 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key, no app specified : www.file4share.net but my application registered on : https://www.google.com/accounts/ManageDomain where could be the error do you have any idea? 2009/12/4 mat...@gmail mat...@gmail.com You are probably using OAuth1.0. Google probably support oauth_callback only which is set when you set up your consumer. You need to send oauth_callback when you get request token if you want use OAuth1.0a. OAuth had changed the timing of sending oauth_callback and added oauth_verifier. Check this document for the details. http://oauth.net/core/1.0a I'm not sure your library support 1.0a though. If not, use default oauth_callback which you set when you set up your consumer, and don't send oauth_verifier. On 2009/12/04, at 11:32, cahit Eyigünlü wrote: I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one of the easiest way to use Social Graph API. http://identengine.com/index.htm On 2009/12/04, at 8:24, File4Share wrote: How could i get the logged user info on google ? which scope do i need to use. I am able to getting token and auth token but i do not know how could i get credentials :( -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/oauth?hl=en. -- You received this message because you are subscribed to the Google Groups OAuth group. To post to this group, send email to oa...@googlegroups.com. To unsubscribe from this group, send email to oauth+unsubscr...@googlegroups.com oauth%2bunsubscr...@googlegroups.com. For more options, visit this group at http
Re: [oauth] Getting user credentials
I verified the domain and also i tryed the same on the localo but no way i always get the same result Dim item As New OAuth.OAuthBase Dim returns Dim ts = item.GenerateTimeStamp Dim nonce = item.GenerateNonce Dim Sign = item.GenerateSignature(New Uri( http://www-opensocial.googleusercontent.com/api/people/@me/@self;), consumerKey, consumerSecret, Session(Token2), Session(SecretToken2), GET, ts, nonce, , returns) do you think is this create the right signature ? do you have any idea with vb ? 2009/12/4 mat...@gmail mat...@gmail.com The parameters seems OK. Then, it might be because your consumer's domain is not verified, or different with www.file4share.net. On 2009/12/04, at 13:20, cahit Eyigünlü wrote: With this information it is working on the google playground :( but i could not understand why it is telling me that 04 Aralık 2009 06:20 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: Dim scope As String = http://www-opensocial.googleusercontent.com/api/people/; Dim returnURL As String = http://www.file4share.net/Returns/Gmail.aspx; Dim RequestFrom As String = http://www-opensocial.googleusercontent.com/api/people/@me/@self; 2009/12/4 mat...@gmail mat...@gmail.com can you send the OAuth scope parameter you send when getting request token? it might not be Portable Contact API's one. the scope list is here, though I couldn't find any info about portable contact API's scope on google's documents :( http://googlecodesamples.com/oauth_playground/ On 2009/12/04, at 13:00, cahit Eyigünlü wrote: Sorry for second post sometimes also give this error : Failed to verify 3 legged OAuth request. Request was invalid.Invalid AuthSub token. but i use the Token that given on the last step :( 04 Aralık 2009 05:58 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I am at the end very thank you for your helps i saved my day with your helps one last thing to complete my operation i have an from : http://www-opensocial.googleusercontent.com/api/people/@me/@self OAuth Authentication FailureInvalid consumer key, no app specified : www.file4share.net but my application registered on : https://www.google.com/accounts/ManageDomain where could be the error do you have any idea? 2009/12/4 mat...@gmail mat...@gmail.com You are probably using OAuth1.0. Google probably support oauth_callback only which is set when you set up your consumer. You need to send oauth_callback when you get request token if you want use OAuth1.0a. OAuth had changed the timing of sending oauth_callback and added oauth_verifier. Check this document for the details. http://oauth.net/core/1.0a I'm not sure your library support 1.0a though. If not, use default oauth_callback which you set when you set up your consumer, and don't send oauth_verifier. On 2009/12/04, at 11:32, cahit Eyigünlü wrote: I could not complete the third step when i try to get complete third step user is not comming back from the google if i use oauth_callback method user come back without oauth_verifier 04 Aralık 2009 03:56 tarihinde cahit Eyigünlü cahit.eyigu...@gmail.com yazdı: I have found from your sended article could you please check if i have any mistake First request to : https://www.google.com/accounts/OAuthGetRequestToken with scope time_stamp Signature Consumer key Second Request to redirecting user to : https://www.google.com/accounts/accounts/OAuthAuthorizeToken with oauth_tokenoauth_token_subsecret and finally: https://www.google.com/accounts/OAuthGetAccessToken i need to make a get to this url i tryed on play ground it worked and on my own software i completed first two steps to complete my software i need one last step what do i need to send to OAuthGetAccessToken get authTokken and i think this is for one time usage, is there any way to get auth token for longer time oauth_token and oauth_token_secret 2009/12/4 mat...@gmail mat...@gmail.com OAuth Auth token key? Do you mean consumer key? or access token? On 2009/12/04, at 10:27, cahit Eyigünlü wrote: http://www-opensocial.googleusercontent.com/api/people/@me/@self That is exactly what i am looking for but i could not see where would i use my oAuth Auth token key to get this info ... 2009/12/4 mat...@gmail mat...@gmail.com Google has Portable Contacts API, a standardized way to get user profile info. http://portablecontacts.net/draft-spec.html http://code.google.com/intl/en/apis/contacts/docs/poco/1.0/developers_guide.html You can also get their external site accounts on Google Profile, using Social Graph API. http://code.google.com/intl/en/apis/socialgraph/ Ident Engine is one
