On Thu, 13 May 2004 02:53, Sjoerd Simons wrote:
Using this on my albook. I get strange distorsions and a too low pitch
when playing a dvd or divx with 48Khz audio.
For the record, the hardware is:
0 [Snapper]: PMac Snapper - PowerMac Snapper
PowerMac Snapper
Hi *,
is there any progress on the status of full support for the newer devices
as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel
from bitkeeper and basically the sound only works reliably when using the
oss emulation.
I can remember a short time under 2.6.* when alsa
Karim Yaghmour wrote:
Well, it seems that I'm going to have to answer my own self ... :)
Yes, usb-audio seems to be a bit forgotten... (Takashi, those
mplayer-plughw-segfaults still persist, even on x86 and even with kernel
2.4 (current cvs of drivers/lib, of course)
The following is what I've
Am Donnerstag, 30. Oktober 2003 20:46 wurde geschrieben:
At Thu, 30 Oct 2003 13:42:14 +0100,
hmm, really weird.
meanwhile, i rewrote snd_pcm_linear_convert() without goto trick.
could you try the attached patch?
... you don't really want to know...
Program received signal SIGSEGV,
Hi all,
I can't get the internal mic or recording from either usb or line-in to
work on a new Powerbook 15 (Aluminium).
The driver works (detects a snapper), but only for playback (and DRC and
bass/treble).
Is there any configuration feature I overlooked?
for the record: kernel 2.6.0-test9
Am Mittwoch, 29. Oktober 2003 19:15 wurde geschrieben:
At Wed, 29 Oct 2003 19:03:02 +0100,
Niklas Werner wrote:
Hi all,
I can't get the internal mic or recording from either usb or line-in
to work on a new Powerbook 15 (Aluminium).
The driver works (detects a snapper), but only
Am Mittwoch, 29. Oktober 2003 19:24 wurde geschrieben:
At Tue, 28 Oct 2003 20:18:35 +0100,
hmm, it seems that a wrong label is used. the label should be
conv_xx12_xx21 (= conv_labels[35]). something is really broken.
could you check stepwise the loop there?
still checking (any tips on
Am Dienstag, 28. Oktober 2003 12:10 schrieb Takashi Iwai:
No, I don't think it is.
I get similar problems with my emi 2|6 and alsaplayer, mplayer, xmms,
...
did you use plughw instead of hw in all cases?
otherwise they won't work always.
plughw doesn't work at all!
mplayer has an
Am Dienstag, 28. Oktober 2003 13:13 wurde geschrieben:
At Tue, 28 Oct 2003 12:48:17 +0100,
Niklas Werner wrote:
Am Dienstag, 28. Oktober 2003 12:10 schrieb Takashi Iwai:
No, I don't think it is.
I get similar problems with my emi 2|6 and alsaplayer, mplayer,
xmms, ...
did
Here we go again,
Am Dienstag, 28. Oktober 2003 19:25 schrieb Takashi Iwai:
hmm, then something wrong in the converter routine...
needs to take a deeper look.
i found a bug regarding the plugin but it must be another bug from the
above problem.
segfault is a bit puzzling. could you try
Hi List!
I am just wondering whether anybody has a solution for following
(admittedly minor) bug:
When I cold-boot (doesn't matter whether PPC or Intel) with my emi 2|6
or reconnect the device the range of the mixer always is set to 0-50%
while using the full range in the hardware. So 50%
Paul Davis wrote:
did you compile the kernel itself with the same gcc?
the combination of gcc-2.x and gcc-3.x on the kernel space will likely
cause oops.
no, i knew about that issue, and thats why i had to recompile
everything. i am tempted to go back to my older ALSA CVS tree (i
tar'ed it
Hi all!
Good News (especially to takashi):
Emagic's emi 2|6 works with 6 channels out using a52dec from dvd!
unfortunately there seems to be no way of accesing the 6 channels via the
.asoundrc-trick from patrick. I can't get any pcmCxD1 or pcmCxD2 device.
alsamixer only shows 2 channels in and
Am Wednesday, 12. June 2002 16:13, wurde geschrieben:
At Wed, 12 Jun 2002 23:10:19 +0900,
Patrick Shirkey wrote:
Takashi Iwai wrote:
it's on cvs. please give a try.
btw, now descriptor proc was removed (one can use lsusb anyway).
instead you'll see formats supported on each stream.
OK, in stream0 now my emi26 is recognised as being capable of 6 outs
@ 44.1 or 48 k and 2 out @ 96 kHz, but still I only get
/proc/asound/card0/: id pcm0p pcm0c stream0
it's ok. a stream can support different formats and channels.
if you find Channels: 6 in stream0
Hi All!
the silent reader strikes again...
Thanks a lot for usb-audio-support in alsa!
Just to let you know:
it works fine with the emagic emi2|6-interface by using the
oss-firmware-loader from http://www.vtoy.fi/~tapio/emi26.html and
rmmod-ing audio afterwards!
I tried it on a powerbook
16 matches
Mail list logo
