On Mon, 29 Aug 2016 17:00:40 +0200,
barmin wrote:
>
> Hi Takashi,
>
> Thanks for your answer.
>
> > Once upon a time, I wrote a patch like below, to assign the USB-audio
> > device to a specific device path. Would it help in your case?
> > (Of course, it's useless for a real hotplug.)
>
> I
barmin wrote:
>> As a workaround, load the snd-seq-dummy module with at least two ports
>> (add "options snd-seq-dummy ports=2" to some .conf file in
>> /etc/modprobe.d/), and write a script that identifies the devices and
>> connects the correct ones to 14:0 and 14:1.
>
> I'm not sure at all how
On Mon, 29 Aug 2016 16:18:08 +0200,
barmin wrote:
>
> >> As a workaround, load the snd-seq-dummy module with at least two
> >> ports (add "options snd-seq-dummy ports=2" to some .conf file in
> >> /etc/modprobe.d/), and write a script that identifies the devices
> >> and connects the correct ones
>> As a workaround, load the snd-seq-dummy module with at least two
>> ports (add "options snd-seq-dummy ports=2" to some .conf file in
>> /etc/modprobe.d/), and write a script that identifies the devices
>> and connects the correct ones to 14:0 and 14:1.
>
> That's probably a silly question but
Hi Clemens,
Thanks for your answer.
> At the moment, the sequencer client name is not updated together with
> the card ID name.
Are there any plans to add this in future versions?
> As a workaround, load the snd-seq-dummy module with at least two ports
> (add "options snd-seq-dummy ports=2" to
barmin wrote:
> I'm trying to use two USB MIDI foot controllers from the same
> manufacturer at the same time and I'm facing the usual problem that
> the device names and numbers change depending on connection order. The
> first one connected is called SSCOM, the second one SSCOM_1.
>
> I added
