As described in subject - I have DELL D420 netbook docked info PR01X
and I cannot get the sound out of SPDIF connector
(located in docking station PR01X).
I can get PCM audio over SPDIF using the same hardware running on WinXP
(so hardware, cabling etc. is fine ...),
but running ubuntu based
Yes, the discussion has ended without real solution. So this is why I've
asked here again.
As soon as the China device arrives I can test if it has the same issues like
your Schiit.
OK, device has arrived:
lsusb:
Bus 007 Device 003: ID 0d8c:0309 C-Media Electronics, Inc.
lsusb.py:
7-3
On 11.12.2012 20:40, Thorsten Mühlfelder wrote:
Yes, the discussion has ended without real solution. So this is why I've
asked here again.
As soon as the China device arrives I can test if it has the same issues
like your Schiit.
OK, device has arrived:
lsusb:
Bus 007 Device 003: ID
Thorsten, list:
On Tue, Dec 11, 2012 at 4:40 PM, Thorsten Mühlfelder
thenk...@salixos.org wrote:
Yes, the discussion has ended without real solution. So this is why I've
asked here again.
As soon as the China device arrives I can test if it has the same issues
like your Schiit.
OK, device
Daniel, Thorsten, list:
On Tue, Dec 11, 2012 at 4:51 PM, Daniel Mack zon...@gmail.com wrote:
On 11.12.2012 20:40, Thorsten Mühlfelder wrote:
depth 32 bit as suggested). The system is running Slackware 14.0 with
kernel 3.2.29 (Alsa 1.0.24).
This kernel is *way* too old. Please try a 3.7
Try to work with aplay -v and you should get immediate feedback
without having to check files etc. If I recall aplay -v -D hw:2,0
with a 96/24 file should tell you that 24 bits is not supported and
suggest some others that are.
Yes, aplay tells me:
Available formats:
- S16_LE
- S32_LE
But
The system is running Slackware 14.0 with
kernel 3.2.29 (Alsa 1.0.24).
This kernel is *way* too old. Please try a 3.7 which has just been released.
OK, I've updated to 3.7.0.
Now lsusb.py shows the device in high speed:
3-30d8c:0309 ef 2.00 480MBit/s 100mA 3IFs (CMEDIA
