Re: [Alsa-user] Boss BR-80
Hi Clemens hi everyone, the guys over at linux musicians forum mentioned that it used to work in older kernels and then not any more: https://linuxmusicians.com/viewtopic.php?p=83159#p83159 Does anyone know about this? Thanks, Ben On 07.07.2017 09:12, Benjamin wrote: Hi Clemens, thanks for your reply! aplay or arecord doesn't work. (See code below) Cheers, Ben benjamin@microlab:~$ aplay -D hw:CARD=BR80AUDIO,DEV=0 pinknoise.wav Wiedergabe: WAVE 'pinknoise.wav' : Signed 16 bit Little Endian, Rate: 44100 Hz, mono aplay: set_params:1299: Sample-Format nicht unterstützt Available formats: - S32_LE benjamin@microlab:~$ arecord -D hw:CARD=BR80AUDIO,DEV=0 bluenoise.wav Aufnahme: WAVE 'bluenoise.wav' : Unsigned 8 bit, Rate: 8000 Hz, mono arecord: set_params:1299: Sample-Format nicht unterstützt Available formats: - S32_LE benjamin@microlab:~$ On 03.07.2017 10:08, Clemens Ladisch wrote: Benjamin via Alsa-user wrote: ALSA: poll time out, polled for 34828045 usecs Apparently, this device is not strictly compatible with the USB Audio specification and requires some vendor-specific command(s) to work. Does aplay or arecord alone work? Regards, Clemens -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Boss BR-80
alright! Thank you! On 10.07.2017 21:53, Stefan Sauer wrote: On 07/09/2017 12:49 PM, Benjamin via Alsa-user wrote: Thank you Stefan! When I plug it in, I get the following: Jul 9 12:43:57 microlab kernel: [26915.544039] usb 3-1: new high-speed USB device number 2 using ehci-pci Jul 9 12:43:57 microlab kernel: [26915.695264] usb 3-1: New USB device found, idVendor=0582, idProduct=0130 Jul 9 12:43:57 microlab kernel: [26915.695267] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 9 12:43:57 microlab kernel: [26915.695269] usb 3-1: Product: BR-80(AUDIO) Jul 9 12:43:57 microlab kernel: [26915.695270] usb 3-1: Manufacturer: Roland Jul 9 12:43:57 microlab mtp-probe: checking bus 3, device 2: "/sys/devices/pci:00/:00:1d.7/usb3/3-1" Jul 9 12:43:57 microlab mtp-probe: bus: 3, device: 2 was not an MTP device Jul 9 12:43:57 microlab kernel: [26916.206685] usbcore: registered new interface driver snd-usb-audio Jul 9 12:43:58 microlab kernel: [26917.143903] usb 3-1: Unable to change format on ep #8e: already in use Yes it is those. I get them too and spent once a night to understand what is going on. Unfortunately one seems to know a lot about usb to make any sense out of it (ep is "end-point"). Stefan Jul 9 12:43:58 microlab kernel: [26917.143986] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.144080] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.144620] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.145000] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146531] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146576] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146634] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.147069] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.147485] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150170] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150268] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150353] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150905] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.151337] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.156123] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.156282] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.157840] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.158384] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.158936] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161557] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161621] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161659] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.162069] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.162447] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168128] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168185] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168221] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168639] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.169006] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174697] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174835] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174923] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.175421] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.177743] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.179765] usb 3-1: Unable to change format on ep #8e: already
Re: [Alsa-user] Boss BR-80
On 07/09/2017 12:49 PM, Benjamin via Alsa-user wrote: > Thank you Stefan! > > > When I plug it in, I get the following: > > Jul 9 12:43:57 microlab kernel: [26915.544039] usb 3-1: new > high-speed USB device number 2 using ehci-pci > Jul 9 12:43:57 microlab kernel: [26915.695264] usb 3-1: New USB > device found, idVendor=0582, idProduct=0130 > Jul 9 12:43:57 microlab kernel: [26915.695267] usb 3-1: New USB > device strings: Mfr=1, Product=2, SerialNumber=0 > Jul 9 12:43:57 microlab kernel: [26915.695269] usb 3-1: Product: > BR-80(AUDIO) > Jul 9 12:43:57 microlab kernel: [26915.695270] usb 3-1: Manufacturer: > Roland > Jul 9 12:43:57 microlab mtp-probe: checking bus 3, device 2: > "/sys/devices/pci:00/:00:1d.7/usb3/3-1" > Jul 9 12:43:57 microlab mtp-probe: bus: 3, device: 2 was not an MTP > device > Jul 9 12:43:57 microlab kernel: [26916.206685] usbcore: registered > new interface driver snd-usb-audio > Jul 9 12:43:58 microlab kernel: [26917.143903] usb 3-1: Unable to > change format on ep #8e: already in use Yes it is those. I get them too and spent once a night to understand what is going on. Unfortunately one seems to know a lot about usb to make any sense out of it (ep is "end-point"). Stefan > Jul 9 12:43:58 microlab kernel: [26917.143986] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.144080] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.144620] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.145000] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.146531] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.146576] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.146634] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.147069] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.147485] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.150170] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.150268] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.150353] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.150905] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.151337] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.156123] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.156282] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.157840] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.158384] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.158936] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.161557] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.161621] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.161659] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.162069] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.162447] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.168128] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.168185] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.168221] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.168639] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.169006] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.174697] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.174835] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.174923] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.175421] usb 3-1: Unable to > change format on ep #8e: already in use > Jul 9 12:43:58 microlab kernel: [26917.177743] usb 3-1: Unable to > change format on ep #8e:
Re: [Alsa-user] Boss BR-80
Thank you Stefan! When I plug it in, I get the following: Jul 9 12:43:57 microlab kernel: [26915.544039] usb 3-1: new high-speed USB device number 2 using ehci-pci Jul 9 12:43:57 microlab kernel: [26915.695264] usb 3-1: New USB device found, idVendor=0582, idProduct=0130 Jul 9 12:43:57 microlab kernel: [26915.695267] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 9 12:43:57 microlab kernel: [26915.695269] usb 3-1: Product: BR-80(AUDIO) Jul 9 12:43:57 microlab kernel: [26915.695270] usb 3-1: Manufacturer: Roland Jul 9 12:43:57 microlab mtp-probe: checking bus 3, device 2: "/sys/devices/pci:00/:00:1d.7/usb3/3-1" Jul 9 12:43:57 microlab mtp-probe: bus: 3, device: 2 was not an MTP device Jul 9 12:43:57 microlab kernel: [26916.206685] usbcore: registered new interface driver snd-usb-audio Jul 9 12:43:58 microlab kernel: [26917.143903] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.143986] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.144080] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.144620] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.145000] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146531] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146576] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.146634] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.147069] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.147485] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150170] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150268] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150353] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.150905] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.151337] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.156123] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.156282] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.157840] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.158384] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.158936] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161557] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161621] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.161659] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.162069] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.162447] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168128] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168185] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168221] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.168639] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.169006] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174697] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174835] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.174923] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.175421] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.177743] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.179765] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.179910] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.181114] usb 3-1: Unable to change format on ep #8e: already in use Jul 9 12:43:58 microlab kernel: [26917.181639]
Re: [Alsa-user] Boss BR-80
On 07/03/2017 06:57 AM, Benjamin via Alsa-user wrote: > Hi everyone! > > Has anybody managed to get this device working as a Linux soundcard? > It's being recognised and displayed but neither jack nor ALSA seem to > be able to use it. I am afraid this has the same troubles like many other Boss and Roland devices. Can you check if you see kernel messages when you plug it in (tail -f /var/log/messages). Stefan > > alsamixer doesn't show any controls for the device and jack won't run, > I only get the following response: > > Hi everyone! > > Has anybody managed to get this device working as a Linux soundcard? > It's being recognised and displayed but neither jack nor ALSA seem to > be able to use it. > > |jackd -d alsa --device hw:1 > jackdmp 1.9.11 > Copyright 2001-2005 Paul Davis and others. > Copyright 2004-2016 Grame. > jackdmp comes with ABSOLUTELY NO WARRANTY > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details > no message buffer overruns > no message buffer overruns > no message buffer overruns > JACK server starting in realtime mode with priority 10 > self-connect-mode is "Don't restrict self connect requests" > audio_reservation_init > Acquire audio card Audio1 > creating alsa driver ... hw:1|hw:1|1024|2|48000|0|0|nomon|swmeter|-|32bit > Using ALSA driver USB-Audio running on card 1 - Roland BR-80(AUDIO) at > usb-:00:1d.7-2, high speed > configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 > periods > ALSA: final selected sample format for capture: 32bit integer > little-endian > ALSA: use 2 periods for capture > ALSA: final selected sample format for playback: 32bit integer > little-endian > ALSA: use 2 periods for playback > ALSA: poll time out, polled for 34828045 usecs > JackAudioDriver::ProcessAsync: read error, stopping... > ^@^CJack main caught signal 2 > Released audio card Audio1 > audio_reservation_finish > > > Thank you for any wisdom here! > > Ben > | > > > -- > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > ___ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Boss BR-80
Benjamin wrote: > $ aplay -D hw:CARD=BR80AUDIO,DEV=0 pinknoise.wav > Wiedergabe: WAVE 'pinknoise.wav' : Signed 16 bit Little Endian, Rate: 44100 > Hz, mono > aplay: set_params:1299: Sample-Format nicht unterstützt > Available formats: > - S32_LE Try plughw instead of hw. Regards, Clemens -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Boss BR-80
Hi Clemens, thanks for your reply! aplay or arecord doesn't work. (See code below) Cheers, Ben benjamin@microlab:~$ aplay -D hw:CARD=BR80AUDIO,DEV=0 pinknoise.wav Wiedergabe: WAVE 'pinknoise.wav' : Signed 16 bit Little Endian, Rate: 44100 Hz, mono aplay: set_params:1299: Sample-Format nicht unterstützt Available formats: - S32_LE benjamin@microlab:~$ arecord -D hw:CARD=BR80AUDIO,DEV=0 bluenoise.wav Aufnahme: WAVE 'bluenoise.wav' : Unsigned 8 bit, Rate: 8000 Hz, mono arecord: set_params:1299: Sample-Format nicht unterstützt Available formats: - S32_LE benjamin@microlab:~$ On 03.07.2017 10:08, Clemens Ladisch wrote: Benjamin via Alsa-user wrote: ALSA: poll time out, polled for 34828045 usecs Apparently, this device is not strictly compatible with the USB Audio specification and requires some vendor-specific command(s) to work. Does aplay or arecord alone work? Regards, Clemens -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] Boss BR-80
Benjamin via Alsa-user wrote: > ALSA: poll time out, polled for 34828045 usecs Apparently, this device is not strictly compatible with the USB Audio specification and requires some vendor-specific command(s) to work. Does aplay or arecord alone work? Regards, Clemens -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user