The move from dracut 059 to 060 led to some additional modules being
in the initrd. A workaround is to add a dracut config snippet that
includes the firmware in the initrd. after putting the file in
/etc/dracut.conf.d/ you will need to rebuild the initrd. ideally the
driver should try and reload
On Fri, 9 Feb 2024, 04:52 Peter Boy, wrote:
> Nowadays several SBC devices provide eMMC storage soldered and no longer
> removable. How to install on this?
>
>
> My first idea was to first install on mSD card, boot, and from this repeat
> the installation with the eMMC target. But this doesn’t
> kernel modules and configurations (along with various other sources) to come
> up with my "ultimate" configuration from my first e-mail thread.
>
> I am at a complete loss. Fedora seems to work on the X13s for everyone except
> me.
>
> Sincerely,
> Luke Short
to get pd-mapper to work you need to remove
/etc/modprobe.d/anaconda-denylist.conf and regenerate the initrd. you
can modprobe qcom_q6v5_pas and then start pd-mapper to get battery
reporting working without a reboot
On Sat, Dec 16, 2023 at 4:17 PM Dennis Gilmore wrote:
>
> Hi Luke,
>
oller: sync_state()
> pending due to 3000.remoteproc
> [ 12.] qcom-rpmhpd 1820.rsc:power-controller: sync_state()
> pending due to 3d90.clock-controller
> [ 12.] qcom-rpmhpd 1820.rsc:power-controller: sync_state()
> pending due to 894000.i2c
> [ 12.]
On Tue, Dec 12, 2023 at 10:01 PM Luke Short wrote:
>
> Hey folks,
>
> I recently purchased the X13s Qualcomm Arm laptop. I am very excited to try
> Linux on it! I'd like to use Fedora to align with what I use for work. The
> [Fedora Wiki](https://fedoraproject.org/wiki/Thinkpad_X13s) page
All of the Arm disk images use initial-setup to configure the image.
There would need to a concrete plan on how to manage the transition to
something else.
Dennis
On Tue, Nov 21, 2023 at 6:35 AM Jiri Konecny wrote:
>
> Hello everyone,
>
> We (anaconda team) are considering discontinuation of
I am just running the Fedora kernel, I have not tried to do anything with
Cuda
On Thu, May 11, 2023 at 7:01 PM Mario Marietto
wrote:
> Im trying to upgrade cuda 10 to 11 and try to use kernel 5.x. Which CUDA /
> kernel versions are running on your nanos ?
>
> Il ven 12 mag 2023,
I have 3 x 4GiB Jetson Nano's. I have updated the u-boot on them using the
update documentation provided, I did put the fedora build u-boot binary in
place and flashed that. I am running Fedora Server on them all. 2 of them
are running freeipa and are my local dns servers, the third I run DHCP and
On Wed, Mar 29, 2023 at 12:38 PM Peter Robinson
wrote:
> "
>
> On Wed, Mar 29, 2023 at 6:18 PM Peter Boy wrote:
> >
> >
> >
> > > Am 28.03.2023 um 14:09 schrieb Peter Robinson :
> > >
> > > Yes, it's a known problem, it will be fixed with the U-Boot rc5 build
> > > which should be done later
Adding count probably cut the image short, it is not necessary, I generally
always us bs=4MiB
Dennis
On Sun, Jan 9, 2022, 03:54 David W. Legg wrote:
> Well, I copied the card from the 2GB rpi4 using:
>
> dd if=/dev/sdf of=card.img bs=1M count=9000 status=progress
>
> and wrote another card
Try running "echo 110 > /sys/class/hwmon/hwmon1/pwm1" then bump it back to
255 I have found that to work on a different rockchip based device
Dennis
On Tue, Dec 7, 2021, 05:30 Peter Robinson wrote:
> > The fan on my Rockpro64 does not work with fedora 34 installed. The
> > file
On Fri, Apr 23, 2021, 09:14 Dominik 'Rathann' Mierzejewski <
domi...@greysector.net> wrote:
> On Friday, 23 April 2021 at 15:49, Dennis Gilmore wrote:
> > On Fri, Apr 23, 2021 at 7:14 AM Dominik 'Rathann' Mierzejewski
> > wrote:
> > >
> > > On Thursday, 22
The u-boot images in Fedora for the RockPro64 are for mmc only, you
need to install it into the sdcard and boot from that. there is
currently no images to install in SPI
Dennis
On Tue, Feb 16, 2021 at 12:09 PM Marcin Juszkiewicz
wrote:
>
> W dniu 16.02.2021 o 18:50, Aaron Siegel pisze:
> >
likely the device tree file needs to have the wif device added for it
to show up.
Dennis
On Tue, Jul 21, 2020 at 9:19 PM brm wrote:
>
> Hi all. OS is 5.7.8-200.fc32.aarch64 Fedora Server running headless on Pine64
> sbc. The system works well. Currently eth0 is the main network device, but I
>
Hi Jeffrey,
Feel free to reach out to me on freenode (dgilmore), I do not have a
huge amount of time but I can help you get started in working on
u-boot. We have a mostly upstream u-boot and work to get all patches
upstream. Getting engaged upstream will also be a necessary step.
Dennis
On Sat,
There was issues identified with 32 bit ceph and upstream stopped
supporting 32 bit arches entirely.
https://lists.fedoraproject.org/archives/list/de...@lists.fedoraproject.org/thread/XCQIMO3W3D5XGHQHBVVIBUBPIXKJJJWL/
has all the details and discussion on it.
Dennis
On Tue, Jul 23, 2019, 15:39
On Wed, 2019-01-23 at 16:13 +0800, Zamir Sun wrote:
> On Wed, Jan 23, 2019 at 12:08 PM Peter Robinson > wrote:
> > Hi,
> >
> > > I have a pinebook (running anarsoul's arch mainline[1]) and I was
> > > wondering if someone has tried Fedora 29 on the pinebook, or if
> > > it is even supported.
>
El lun, 07-01-2019 a las 15:21 +0100, arm...@rirasoft.de escribió:
> Am 2019-01-03 15:17, schrieb Dennis Gilmore:
> > El jue, 03-01-2019 a las 08:57 +0100, arm...@rirasoft.de escribió:
> > > Hello together and and happy and healthfull new year !
> > >
> > >
El jue, 03-01-2019 a las 08:57 +0100, arm...@rirasoft.de escribió:
> Hello together and and happy and healthfull new year !
>
> Yesterday the parcel with Helios 4 is be well received. Is there any
> hint to install Fedora (or maybe CentOS) on it?
>
> Greetings
> Andreas
Hi Andreas,
fedora
El mar, 04-12-2018 a las 16:14 -0500, Robert Moskowitz escribió:
>
> On 12/4/18 1:24 PM, Dennis Gilmore wrote:
> > The odroid boards need binary files we can not distribute. While I
> > have
> > a couple they are not really supportable.
>
> No success today. H
El mar, 04-12-2018 a las 13:12 -0500, Robert Moskowitz escribió:
>
> On 12/4/18 12:51 PM, Peter Robinson wrote:
> > On Tue, Dec 4, 2018 at 5:17 PM Robert Moskowitz <
> > r...@htt-consult.com> wrote:
> > > Additional bug? in F28 x64 installer:
> > >
> > > # fedora-arm-image-installer
El dom, 14-10-2018 a las 16:24 +0200, Torbjorn Jansson escribió:
> Hello
>
> for a while now i have been struggling to create a set of steps to
> make a
> successfully bootable fedora 28 image for my odroid hc2 computers.
>
> the reason for this is several, but main one is to have all gluster
>
I have been meaning to do a write up on the board, it works quite well
using the upstream u-boot and kernel. There is a couple of config
options that need to be set for fan control to work, right now only one
of the two fans is full controlable using the upstream bits. As soon as
El mar, 13-03-2018 a las 22:51 +0900, sakurai escribió:
> 2018-03-13 8:18 GMT+09:00 Peter Robinson :
> > On Mon, Mar 12, 2018 at 10:47 PM, sakurai
> > wrote:
> > > Hi Peter,
> > >
> > > Thank you for your prompt comment.
> > > I removed uEnv.txt but
El lun, 12-03-2018 a las 07:01 +0900, sakurai escribió:
> Hi.
>
> Has anyone already suceeded to install ARM Fedora 27 on the beagle
> bone black?
> If so, would you kindly provide a pointer?
> I have tried to install it using --target=am335x_boneblack but
> failed.
> It seems there is
> not
El vie, 05-01-2018 a las 08:20 -0800, Stewart Samuels escribió:
> Does anyone know if the Mate Spin for F28 will exist? I have
> noticed
> that it existed in the first week or two of the rawhide productions,
> but
> hasn't been there in the past several weeks. Is this spin being
> terminated?
El mié, 30-08-2017 a las 10:16 +0200, arm...@rirasoft.de escribió:
> Summary of Fedora on Odroid XU4
>
> 1. with Kernel 4.6.5-300.fc24 system boots without failure, but
> update
> to newer kernel fails due dracut didn't build suitable intramfs
>
El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
> All,
>
> I have been working toward getting the Odroid-Xu4 to boot from the
> eMMC card but the system continues to fail in the same place no
> matter what I try. It dumps me into the dracut shell when it cannot
> find the root
the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
file and we do not ship it, or its just not making it.
Dennis
>
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > > Am 23.08.2017 um 16:20 sch
El mié, 23-08-2017 a las 11:46 -0700, Stewart Samuels escribió:
> Dennis,
>
> Have you tried building the system on an eMMC card and booting that?
> Just curious.
>
> Thanks,
>
> Stewart
I have not, I do not have a emmc card
Dennis
> On 08/23/2017 10:
red up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel.
Dennis
> Thanks.
>
> Stewart
>
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
> > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> >
El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
> --
> >
>
> Hello Dennis,
>
> that looks beautiful. You have a running Odroid-XU4 with actual
> Kernel
> with Fedora 26 !!
>
> How did y
El mar, 22-08-2017 a las 18:18 -0700, Stewart Samuels escribió:
> Dennis,
>
> How do I rebuild the initrd? I can do this on my raspberryPI 2
> running Fedora 26 if I know the procedure to do it?
you would have to use an arm device mount the filesystems, bind mount
in /dev /proc /sys chroot in,
El mar, 22-08-2017 a las 15:14 -0700, Stewart Samuels escribió:
> Hello Dennis,
>
> The parameter you provided me below was incorrect (spelling error).
> I used cpuidle.off=1 and the system now boot much further, but
> eventually goes into a:
>
> > dracut-initqueue[493]: Warning:
El mar, 15-08-2017 a las 17:25 -0700, Stewart Samuels escribió:
> Ok. The u-boot issue was my mistake. I was trying to use the
> /usr/share/uboot/odroid u-boot files instead of the
> /usr/share/uboot/odroid-xu3 files. Now I am getting output to the
> serial console and the system begins the
El sáb, 29-04-2017 a las 02:40 -0400, Jon Masters escribió:
> This was a different issue - mirrorlist entries don't work on the
> test compose but Beaker doesn't know not to create a "fedora-updates"
> repo. I turned that off at the distro level on my server.
The issue is that beaker is using
El mié, 19-04-2017 a las 10:31 -0400, Richard Ryniker escribió:
> Running on Raspberry Pi 3, with updates to April 19:
>
> [ryniker@RPi3-2 ~]$ uname -a
> Linux RPi3-2 4.11.0-0.rc5.git0.1.fc26.armv7hl #1 SMP Mon Apr 3
> 21:06:36 UTC 2017 armv7l armv7l armv7l GNU/Linux
> [ryniker@RPi3-2 ~]$
El mié, 25-01-2017 a las 10:37 -0500, Robert Moskowitz escribió:
> I build a CubieTruck image using the installer script with the
> following
> options:
>
> --target=Cubietruck --media=/dev/sdb --norootpass --selinux=OFF
> --addconsole --resizefs
allwinner automatically outputs to the serial
On martes, 10 de enero de 2017 3:48:21 AM CST Peter Robinson wrote:
> On Tue, Dec 13, 2016 at 12:55 PM, Tomasz Kłoczko
>
> wrote:
> > Hi,
> >
> > Current rawhide fedora image is using xfs has a bit higher memory
> > requirements than btrfs so I've started thinking
Hi All,
We have been working on a service to create notifications when people add or
remove ExcludeArch/ExclusiveArch to packages. at the moment they get sent to
pingu. We can easily send to static email addresses. but we need to know where
to send them.
Longer term I want to get the
On domingo, 23 de octubre de 2016 9:49:51 PM CDT sfshe...@gmail.com wrote:
> Thank you for supporting the raspberrypi. Fedora must be one of the first
> distributions to support it with only upstream sources. I tried the
> workstation image and it did not work for me. I was using my old VGA
>
On Thursday, August 11, 2016 10:57:41 PM CDT searide...@gmail.com wrote:
> Hello,
>
> I cannot seem to get past Xorg failures to boot into graphical mode on my
> Odroid-Xu4 running either the downloaded 4.5.5-300 based kernel system or
> the "dnf update" 4.6.5-300 kernel based system and
On Friday, July 22, 2016 12:28:40 PM CDT Gerd Hoffmann wrote:
> Hi,
>
> Booting armv7 machines is pretty messy, and fedora seems to support
> uboot only for them. There isn't a armv7 build of grub2 ...
>
> qemu virtual machines (-M virt machine type) look pretty much identical
> for armv7 and
On Wednesday, June 29, 2016 6:37:48 PM CDT ali hagigat wrote:
> On 6/29/16, arm...@rirasoft.de wrote:
> > Am 2016-06-19 08:28, schrieb ali hagigat:
> >> I have the following software and hardware:
> >>
> >> - Odroid XU4
> >> - Fedora-LXDE-armhfp-24-Beta-1.6-sda.raw.xz
> >>
>
On Friday, May 13, 2016 8:52:46 AM CDT Steven Falco wrote:
> I have a wandboard quad running Fedora 23. When I tried to run a dnf update
> today, I got an error that /boot was full.
>
> Looking at it, I see that all the past dtb dirs are still hanging around.
> Here is a listing:
>
> Error
On Wednesday, May 4, 2016 4:17:17 PM CDT Andreas Reschke wrote:
> Am 03.05.2016 um 23:30 schrieb Dennis Gilmore:
> > On Tuesday, May 3, 2016 3:41:38 PM CDT Peter Robinson wrote:
> >> On Tue, May 3, 2016 at 3:23 PM, <arm...@rirasoft.de> wrote:
> >>> Hi there
On Tuesday, May 3, 2016 3:41:38 PM CDT Peter Robinson wrote:
> On Tue, May 3, 2016 at 3:23 PM, wrote:
> > Hi there,
> > now the board is on my table.
> >
> > The only image i've found is
> > linaro-desktop-cubietruck-plus-card-dp-v1.1.img. But I don't think its a
> > real
On Wednesday, April 27, 2016 1:37:35 PM CDT Peter Robinson wrote:
> On Wed, Apr 27, 2016 at 1:18 PM, Chanho Park wrote:
> > Hi all,
> >
> > I want to use the armhf fedora rootfs on the aarch64 bit kernel.
>
> You can't, it's not a use case we support.
To further this
Hi All,
I just wanted to let you know that yesterday we enabled building armhfp docker
base images for branched and rawhide. They will land on the mirrors next to
the x86_64 docker base image
http://download.fedoraproject.org/pub/fedora/linux/development/24/Docker/
armhfp/images/
On Wednesday, March 9, 2016 7:43:05 PM CST David Jones wrote:
> Hi
>
> Installed
>
> Fedora-Minimal-armhfp-24-20160308.0-sda.raw
>
> Is arm-boot-config still being used? if so it was missing from the image.
>
> Regards
>
> David
No it has been removed from fedora. it is expected that you
On 2016-02-27 11:59, Richard W.M. Jones wrote:
On Sat, Feb 27, 2016 at 10:45:55AM -0600, Dennis Gilmore wrote:
On Saturday, February 27, 2016 03:44:04 PM Richard W.M. Jones wrote:
> On Sat, Feb 27, 2016 at 01:33:26PM +, Richard W.M. Jones wrote:
> > Should I try a newer guest? I
On Saturday, February 27, 2016 03:44:04 PM Richard W.M. Jones wrote:
> On Sat, Feb 27, 2016 at 01:33:26PM +, Richard W.M. Jones wrote:
> > Should I try a newer guest? I am going to try updating to Fedora 23.
>
> Same thing.
>
> Attached is the qemu command line. In this run I'm using some
On Monday, December 21, 2015 05:21:55 PM Troy Dawson wrote:
> Hi All,
> Yep, it's my report on the worst named arm computer, that runs good :)
>
> Anyway I have two reports.
> ** 1st report **
> From all my tests, the PCDuino3 Nano Light "just works". I installed
> the F23 XFCE image, followed
On Wednesday, September 02, 2015 04:43:19 PM Miroslav Lichvar wrote:
> On Wed, Sep 02, 2015 at 09:29:27AM -0500, Dennis Gilmore wrote:
> > any attempt to set the time based on something in the filesystem is going
> > to result in the time being off. if it is something bake
On Wednesday, September 02, 2015 04:45:33 PM Till Maas wrote:
> On Tue, Sep 01, 2015 at 01:38:21PM -0500, Dennis Gilmore wrote:
> > Without a battery backed RTC its really not that useful. Picture 6 or 10
> > months after a release, does it matter if the time is half a year to a
&
On Wednesday, September 02, 2015 03:46:55 PM Miroslav Lichvar wrote:
> On Wed, Sep 02, 2015 at 08:51:17AM -0400, Robert Moskowitz wrote:
> > OH?!? I am running F22 with Xfce, last updated Aug 23. So whatever is in
> > there wrt systemd-timesyscd and chronyd is what was in the image orginally
> >
On Tuesday, September 01, 2015 01:03:03 PM Robert Moskowitz wrote:
> On 09/01/2015 12:14 PM, Robert Nelson wrote:
> > On Tue, Sep 1, 2015 at 11:10 AM, Robert Moskowitz
wrote:
> >> How is system time set? Is ntpdate run after the network is ready? How
> >> long does it
env default -f -a
On July 3, 2015 2:26:29 PM CDT, Steven Falco stevenfa...@gmail.com wrote:
On 07/03/2015 03:05 PM, Steven Falco wrote:
On 07/03/2015 01:53 PM, Steven Falco wrote:
So the next challenge is to figure out why I'm getting the
unrecognized
filesystem type.
This appears to be
On Wednesday, June 17, 2015 05:57:00 PM Andrew Wing wrote:
Thank you again. That's got me a little further.
I notice from looking at the sd card it uses ext3 for the boot partition,
ext4 for the root file system, so the dd to the mmc must preserve that.
Unfortunately the boot loader only has
Hi All,
I have built and posted a Fedora 22 Docker base image for ARM that matches the
one on x86_64. it can be found https://ausil.us/fedora-arm/22/Docker/armhfp/
enjoy
Dennis
signature.asc
Description: This is a digitally signed message part.
___
On Tuesday, June 02, 2015 09:11:08 AM Adam Miller wrote:
On Tue, Jun 2, 2015 at 9:05 AM, Dennis Gilmore den...@ausil.us wrote:
Hi All,
I have built and posted a Fedora 22 Docker base image for ARM that matches
the one on x86_64. it can be found
https://ausil.us/fedora-arm/22/Docker
On Friday, May 08, 2015 12:03:57 PM Clive Messer wrote:
On Thu, 2015-05-07 at 18:35 +1000, Adrian wrote:
Clive's FC21 images at www.digitaldreamtime.co.uk/images/Fidora/21
are fantastic ,
looking forward to build the PI2 F22 images here on that base in the
near future.
The
On Wednesday, May 06, 2015 04:39:25 PM jefby wrote:
Hello,everyone.
When i use mock build the DVD iso for AACH64,it prints this error,do
you know how to fix it and why ??
Thanks very much!
how are you running pungi?
all fedora composes happen in mock chroots of the target os.
depmod:
Hi all,
https://ausil.us/fedora-arm/22_Beta_RC3/Docker/armhfp/
contains a updated docker base image that matches the Fedora 22 Beta RC3
compose. which is the F22_Beta final image.
Dennis
signature.asc
Description: This is a digitally signed message part.
Hi all,
https://ausil.us/fedora-arm/22_Beta_TC8/Docker/armhfp/
contains a updated docker base image that matches the Fedora 22 Beta TC8
compose.
Dennis
signature.asc
Description: This is a digitally signed message part.
___
arm mailing list
On Saturday, March 21, 2015 03:40:20 PM Hans de Goede wrote:
Hi,
On 21-03-15 15:21, Hans de Goede wrote:
Hi,
On 06-03-15 23:50, Peter Robinson wrote:
I assume that we will be rebasing u-boot to the just released v2015.01
for F-22? But I was wondering if there is any chance we can
Hi all,
https://ausil.us/fedora-arm/22_Beta_TC2/Docker/armhfp/
contains a updated docker base image that matches the Fedora 22 Beta TC2
compose.
Dennis
___
arm mailing list
arm@lists.fedoraproject.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 8 Mar 2015 19:00:41 +0100
Tomasz Urbański utom...@gmail.com wrote:
Hi,
Let me ask some question:
1) What is the relationship between u-boot, syslinux/extlinux, grub in
installation process of F21 on ARM boxes? (I see elements of all this
a install
working
Dennis
TUR
8 mar 2015 21:19 Dennis Gilmore den...@ausil.us napisał(a):
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 8 Mar 2015 19:00:41 +0100
Tomasz Urbański utom...@gmail.com wrote:
Hi,
Let me ask some question:
1) What is the relationship between
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have been working with Ian McLeod on getting oz and imagefactory
running on arm. I used the resulting work to build a docker base image
for arm. docker is installable on arm in f22 and rawhide though the
registry does not work very well. We are
/tree/arm/run-container
- Original Message -
From: Dennis Gilmore den...@ausil.us
To: Fedora-Arm arm@lists.fedoraproject.org
Sent: Wednesday, March 4, 2015 5:06:39 AM
Subject: [fedora-arm] Docker image for arm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I have been
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I have been working with Ian McLeod on getting oz and imagefactory
running on arm. I used the resulting work to build a docker base image
for arm. docker is installable on arm in f22 and rawhide though the
registry does not work correctly
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 25 Feb 2015 09:19:13 -0500
Cole Robinson crobi...@redhat.com wrote:
Hey all,
First time trying to setup my cubietruck/cubieboard3. I used
fedora-arm-installer[1] to fill in an 8GB sd card on my host machine,
using
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, 23 Feb 2015 21:21:18 -0500
Robert Moskowitz r...@htt-consult.com wrote:
Went looking for the flash-plugin for arm, and don't find one.
get.adobe.com/flashplayer thinks I need the i386 version.
afaik none exists. I have heard of versions
Well you got the debuginfo rpm from rpmfusion. Your best bet would be to loo
there. The gpg message is because you do not have the rpmfusion key imported
Dennis
On February 20, 2015 7:32:17 PM CST, Robert Brown rebr...@exemail.com.au
wrote:
Hi
Thanks for the reply.
On 21/02/15 09:54, Stephen
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, 19 Jan 2015 09:19:24 -0500
Robert Moskowitz r...@htt-consult.com wrote:
I go to:
http://koji.fedoraproject.org/koji/tasks?state=allview=treemethod=applianceorder=-id
for my images to work with. There has not been a successful build
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, 17 Jan 2015 14:08:03 +1000
Brae Wright braewrigh...@gmail.com wrote:
Hey all, just wondering if there has been any progress with running
fedora arm on the udoo quad?
I tried rawhide images but the putty console just displays a heap of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 15 Jan 2015 19:37:13 +0800
Brooks Hu brooks...@gmail.com wrote:
Hi Guys,
I am trying to customize F21 ISO and have done some attempts but
failed. Here are some details:
1. I replace some packages in Packages directory, then run
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
That is a very odd kickstart and is missing sections you need like a
location for the install tree.
http://fedoraproject.org/wiki/Anaconda/Kickstart has all the kickstart
options I suggest you look at them. you may be best off doing a manual
install
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 20 Nov 2014 20:15:30 -0600
Jeffrey Ollie j...@ocjtech.us wrote:
Hey ARM experts:
I'm trying to update the Fedora Asterisk package to version 13
(rawhide). The build is failing on ARM wilh the following error:
checking for working
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 13 Nov 2014 09:14:19 -0500
Adam Goode a...@spicenitz.org wrote:
Works great for me! Thanks.
Does anyone have a beaglebone white? I'm still worried that this fix
will break that board.
Adam
I tested on my beaglebone white before i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 11 Nov 2014 12:54:36 -1000
Robert Moskowitz r...@htt-consult.com wrote:
Doing a 'yum update' with the current beta and seeing a fast download
and then the slow delta build, especially since this is SD speeds and
such.
So it might seem
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 11 Nov 2014 14:43:41 -1000
Robert Moskowitz r...@htt-consult.com wrote:
On 11/11/2014 02:30 PM, Matthew Miller wrote:
On Tue, Nov 11, 2014 at 01:54:46PM -1000, Robert Moskowitz wrote:
So it might seem worthwhile to disable deltas?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 14 Oct 2014 18:23:06 -0400
Robert Moskowitz r...@htt-consult.com wrote:
This is NOT a question about Redsleeve. Rather about the F19 uboot
that I use with RSEL. It would impact any F19 Cubietruck system, and
as Hans has pointed out any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 19 Aug 2014 09:20:31 -0400
Robert Moskowitz r...@htt-consult.com wrote:
On 08/19/2014 08:43 AM, Robert Moskowitz wrote:
First, I have gotten tigervnc-server working on the Fedora20 remix
for my cubieboard2, so I have the steps down. At
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 19 Aug 2014 14:18:29 -0400
Robert Moskowitz r...@htt-consult.com wrote:
I have a couple SATA drives I would like to test booting from. Is
there anything special I need to do, or can I 'just' attach with a
USB/SATA adapter, run the install
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 14 Aug 2014 09:43:07 -0400
Robert Moskowitz r...@htt-consult.com wrote:
On 08/14/2014 09:22 AM, R P Herrold wrote:
On Thu, 14 Aug 2014, Gordan Bobic wrote:
You could just mount tmpfs on /tmp. Then you can be sure it gets
cleared by
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 01 Aug 2014 00:20:19 +0200
Hans de Goede hdego...@redhat.com wrote:
Hi,
On 07/31/2014 02:58 PM, Dennis Gilmore wrote:
On Thu, 31 Jul 2014 10:16:00 +0200
Hans de Goede hdego...@redhat.com wrote:
Hi,
On 07/30/2014 10:48 AM
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 31 Jul 2014 10:16:00 +0200
Hans de Goede hdego...@redhat.com wrote:
Hi,
On 07/30/2014 10:48 AM, Hans de Goede wrote:
Hi Dennis et al,
As you may have heard Ian Campbell and I have become u-boot
custodians for sunxi boards.
On Sun, 13 Jul 2014 10:12:45 +0100
Peter Robinson pbrobin...@gmail.com wrote:
When it finished, I popped it out and re-inserted it so that it
would mount the partitions. I read the instructions for the
CubieTruck on the ARM Rawhide Installation page
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 2 Jul 2014 14:00:48 -0400 (EDT)
Paul Whalen pwha...@redhat.com wrote:
Good afternoon,
For those using rawhide there is a bug in rpm which will prevent
further updates (arch detection will be 'arm' vs 'armhfp'). This can
be resolved
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 12 Jun 2014 11:39:00 +0100
Richard W.M. Jones rjo...@redhat.com wrote:
Of the ones I know about ...
avgtime
Written in the 'D' language which doesn't have support for ARM
upstream.
grub2
ARM (32 bit) boots using u-boot.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 30 May 2014 15:41:55 +0200
Hans de Goede hdego...@redhat.com wrote:
Hi All,
Are we going to stay with 2014.04, or are we going to move to
2014.07 ?
The main reason I'm asking is because of Allwinner support. Currently
we (the linux
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 29 May 2014 13:13:19 -0700
Adam Williamson awill...@redhat.com wrote:
So, I wish we'd noticed this sooner, but hacking at the release
criteria today I happened to notice a bit of a problem in the Fedora
Server product planning.
The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 14 May 2014 15:44:39 -0400
Derek Atkins warl...@mit.edu wrote:
Hey All,
I'm looking to build a Fedora-ARM-based Audio server (actually several
of them). The idea is that I would plug the ARM box into my network
and connect it to an amp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, 12 May 2014 14:04:13 +0200
Joey j...@binbash.org wrote:
Hi list,
For anyone who's interested, I wrote a blog about running a Fedora 20
KVM host and guest(s) on a Cubietruck.
the much much simpler route is to use a nightly rawhide
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Rawhide has a dtb imx6q-nitrogen6x.dtb
it's likely a matter of just getting the right u-boot in place.
Dennis
On Mon, 14 Apr 2014 09:59:06 -0400
Mark Haney mha...@practichem.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 10 Apr 2014 16:33:25 +0800
Steve Underwood ste...@coppice.org wrote:
On 04/10/2014 04:24 PM, Matthias Runge wrote:
On 04/10/2014 06:55 AM, Adrian wrote:
Support for the BeagleBone Black has been added in Fedora 20.
The
GA release
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 28 Mar 2014 09:55:16 +
Peter Robinson pbrobin...@gmail.com wrote:
Hi Clive,
Just a friendly heads-up
Thanks.
Set bootm_size for dtb passing issues, use better load addresses
for TI
After updating arm-boot-config
1 - 100 of 241 matches
Mail list logo