On Friday 20 December 2013, Goke M Aruna wrote:
hello AJ,
Can I benefit from that code of yours?
regards
As it was written for a very specific application, it's extremely unlikely that
it will suit your environment.
If you are wanting me to write some application-specific software for your
Hello,
CentOS 6.x and Asterisk 11.x
I have an interesting, to me at least, situation. Using a Polycom
501(also tried with X-Lite). I have set up Asterisk to accept
registration from the Polycom and it registers successfully but then
withing 30 seconds on the CLI I get the message that the Polycom
Make sure you have nat=yes in your sip.conf either under globals or
individual sip peer settings.
Nick Olsen
Network Operations
(855) FLSPEED x106
From: John Millican j...@millican.us
Sent: Thursday, January 02, 2014 10:50 AM
To: Asterisk Users
Kilburn Abrahams wrote:
Hi All
Hola,
I am testing Asterisk 12 and got most things working, but cannot get a
trunk setup working. I am using the new pjsip channel driver. The
provider provides IP security so no registering or credentials are
required.
snip
My version12
[udpnonat]
Mordechay Kaganer wrote:
B.H.
Hello, all
I'm using Asterisk 11.7, connected to PSTN using SIP trunk.
I'm looking for a way to get data from INVITE's SDP. Specifically, i
would like to get a value of o= for incoming call from PSTN because it
contains data about the operator that the call
Hello, I'm having issues with my phone Polycom sp450 not subscribing to
Asterisk server. Asterisk server is fine, firewall is not the issue because
a secondary phone is working fine, my connection to the server is fine too,
any ideas or suggestions are welcome.
-Motty
--
top posting so as to not make thread even more confusing.
Nick,
I have nat=force_rport,comedia in sip.conf. It is my understanding that
nat=yes is deprecated?
Thanks,
JohnM
On 01/02/2014 10:51 AM, Nick Olsen wrote:
Make sure you have nat=yes in your sip.conf either under globals or
Which firmware version? 4.1.x is only for use with MS Link server. A symptom
of running 4.1.x firmware with a non-MS server is the phone will not show
buddies.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf
asterisk-users-boun...@lists.digium.com wrote on 01/02/2014 10:03:19 AM:
From: motty cruz motty.c...@gmail.com
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com,
Date: 01/02/2014 10:02 AM
Subject: [asterisk-users] Asterisk 1.8.22.0 Polycom ip
I believe you're correct. And that should be the correct setting.
However, You may want to do a packet sniff and confirm you're seeing the
actual traffic as expected. Being that you see timeouts on the asterisk
side. My bet is the rtp/sip traffic is going toward the device on a port
it's not
Thank you all for your prompt reply,
my phone was working up until this morning it just stop subscribing to the
Asterisk server.
Version: 3.2.4.0244
phone is configure to download configuration via ftp, again it configure
right because it was working fine.
the phone icon next to the extension
top posting is superior anyway --- *ducking to avoid thrown objects*
If I recall correctly, when doing something like that with a polycom I
had to set the registration interval absurdly low, like 20 seconds or
something. I think the Polycom didn't send keepalives and that was the
workaround.
Adam,
Thanks, I will try that this afternoon.
JohnM
On 01/02/2014 11:31 AM, Adam Moffett wrote:
top posting is superior anyway --- *ducking to avoid thrown objects*
If I recall correctly, when doing something like that with a polycom I
had to set the registration interval absurdly low, like
On Thu, Jan 2, 2014 at 11:13 AM, Eric Wieling ewiel...@nyigc.com wrote:
Which firmware version? 4.1.x is only for use with MS Link server. A
symptom of running 4.1.x firmware with a non-MS server is the phone will
not show buddies.
I'm running 4.1.0 on a Polycom IP 335 and IP 550 and
Thank you all,
After setting the phone to factory defaults, entered configuration
parameters, phone is working again. I really don't know why all sudden stop
working. at least know i have a working phone I will go thoroughly through
the logs, I hope to find the answer, if I do I will post it
15 matches
Mail list logo
