[asterisk-users] ExternalIVR testing

who is using ExternalIVR today and/or is willing to test these patches I would appreciate the help. I will be glad to provide any help or explanation needed. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com

[asterisk-users] PRI call progress issue

I've got a couple of PRIs. When I call out on them from internal SIP phones, I will get ringing if the dialed number is ringing, but if the dialed number is busy I'll get dead air. Can anyone suggest ways to trouble shoot this? Don't seem to having any other problems with the PRIs. Thanks, David

Re: [asterisk-users] PRI call progress issue

] wanpipe6 span=6,0,0,esf,b8zs bchan=121-143 hardhdlc=144 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun

[asterisk-users] Duplicating existing PBX function

instead of auto-answers. Any suggestions on how to do this? If there's another way, I'm open to that as well. TIA! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com

[asterisk-users] Gxp 2000 softkey question

to dial *1 during a call. I also have setup another key to monitor the status of recording (on/off) using the BLF function and the devstate function. (new in 1.6 back ported to 1.4) However I seem to be unable to combine these functions in to a single key. Can anyone offer any assistance? Thanks, David

[asterisk-users] Softphone question

I'm afraid I already know the answer because I've done a lot of searching, but does anyone know of a softphone that supports a central phone book and paging (like the sip autoanswer option of some hardphones) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc

Re: [asterisk-users] SIP vs RTP destination IP

Thx! That did it. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Olle E. Johansson

[asterisk-users] SIP vs RTP destination IP

and the softphones are sending the wrong ip. I can't find an option in the softphone to change ip it sends. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com ___ -- Bandwidth

Re: [asterisk-users] Weird sip problem

There are no sip packets created to the hard phone (I'm using a softphone and those sip packets are there) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun

Re: [asterisk-users] Weird sip problem

If it makes a difference the phone is a gxp 2000 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com

Re: [asterisk-users] Weird sip problem

peers shows the phone as OK. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of David

[asterisk-users] Weird sip problem

I've got a weird problem: I've added a new phone and sip show peers shows a status of OK (x ms) but when I dial it I get status is 'UNKNOWN' Any help on how to troubleshoot this? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da

[asterisk-users] Provisioning GXP 2000

interface for *every* phone? Or is there a better, more automatic, way? TIA!!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com ___ -- Bandwidth and Colocation Provided by http

Re: [asterisk-users] Good phone near $125

I've worked with VoIP Supply several times in the past. I've been very pleased with their service. And if you compare the prices of the two phones you mention: Polycom IP 320 330 a difference of 109.94 vs 106 and 84.95 vs 83 seems to disperse the allegation of being overpriced. Thanks, David

Re: [asterisk-users] Good phone near $125

When I was first looking at Aastra, over a year ago, I thought there was some talk that Aastra was more supportive of asterisk then most vendors. Is this still true? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com

[asterisk-users] Aastra 9133i programmable buttons (* 4.1.23)

Is it possible to control the light on a programmable button without the blf option? I'm using a programmable button to turn call recording on and off and I would like the light to indicate the status. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285

[asterisk-users] Good phone near $125

I was looking at the aastra 9133i, however I was informed that this phone is no longer supported. What are good phones around the $100 - $125 price point? (Need POE) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com

Re: [asterisk-users] Trying to get sample applicationmap to work (*1.4)

I'm sorry, but it looks like it's working correctly now. I will update the bug if I am able to verify any problems. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun

Re: [asterisk-users] Trying to get sample applicationmap to work (*1.4)

It was with the patch applied, but after I restarted asterisk. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun

[asterisk-users] Trying to get sample applicationmap to work (*1.4)

, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options

Re: [asterisk-users] Trying to get sample applicationmap to work (*1.4)

I don't really think that's a problem, because I'm able to use the other built in options: *1 to record; ## transfer (I changed this from a single pound) and there have been a couple times that I wouldn't hit them quickly enough. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer

Re: [asterisk-users] Trying to get sample applicationmap to work (*1.4)

Wow! Thanks! That's a very clear answer and completely understandable. Is this something I should open a bug report on? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users

Re: [asterisk-users] Trying to get sample applicationmap to work (*1.4)

that res_features.so was recreated in /usr/lib/asterisk/modules asterisk -r -- I never shut asterisk down module unload res_features.so module load res_features.so After this there was no change, it worked using the macro but using the Set(DYN... on the caller only. Thanks, David Ruggles

[asterisk-users] Caller ID replacement

and extensions and have this done somewhat automagically. Any suggestions? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com ___ -- Bandwidth and Colocation Provided by http

Re: [asterisk-users] Caller ID replacement

Could you give me an example of how this would look in the dialplan? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun

Re: [asterisk-users] Caller ID replacement

Some googling lead me to this: http://hans.fugal.net/blog/tag/astdb Which looks like it has an answer. Thanks all! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 da...@safedatausa.com -Original Message- From: asterisk-users-boun

[asterisk-users] Problems with 9133i config

, SUBSCRIBE, NOTIFY Supported: replaces WWW-Authenticate: Digest algorithm=MD5, realm=asterisk, nonce=2f250e11 Content-Length: 0 Scheduling destruction of SIP dialog 'a85fb0e71a3e7def4bd7d7f158933...@192.168.0.11' in 32000 ms (Method: REGISTER) Thanks, David Ruggles CCNA MCSE (NT) CNA

[asterisk-users] Troubleshoot in-bound DTMF over PRI

, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit

[asterisk-users] Dynamic meetme conference creation with Authenticate (Asterisk 1.4.0)

set to 1022 no matter what password is used. The passwords are stored in a file so they can easily be changed. Can anyone tell me what I'm doing wrong? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

Re: [asterisk-users] Dynamic meetme conference creation withAuthenticate (Asterisk 1.4.0)

I'm sorry for missing something so obvious! That was my problem. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tilghman Lesher Sent

Re: [asterisk-users] Dumb AGI question

Thank you sir! Am using verbose command now which works and I will take a look at the syslog. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

[asterisk-users] Dumb AGI question

forgot some piece of key information. Any suggestions? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation Provided by http://www.api-digital.com

[asterisk-users] Shared gsm files

any problems? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE

[asterisk-users] Asterisk IVR Performance

utilization is below 50% with spikes to 70% under load with four or five ExternalIVRs running. I will gladly provide any additional information that would aid in answering these questions. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL

Re: [asterisk-users] what codecs for LAN

combination? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Al lists Sent: Wednesday, July 18, 2007 10:46 AM To: Asterisk Users Mailing List

RE: [asterisk-users] asterisk mysql support

Issue: module load cdr_addon_mysql On the asterisk command line and post any error messages you receive Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

RE: [asterisk-users] (no subject)

That made all the difference! Thanks again! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ruggles Sent: Wednesday, May 30, 2007

RE: [asterisk-users] Help with IAX

In both iax.conf files change [iax-trunk] to [tecinfo] the [name] in iax.conf is what is looked for when a connection is established and you're telling it to connect with tecinfo on the username= line HTH Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc

RE: [asterisk-users] Help with IAX

=user context=iax-trunk username=tecinfo secret=secret host=192.168.253.21 Try this and respond with error messages (if any) from both systems Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED

FW: [asterisk-users] Help with IAX

: [tecinfo2] type=user context=iax-trunk secret=secret host=192.168.253.21 Try this and respond with error messages (if any) from both systems Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED

[asterisk-users] (no subject)

about IAX optimization and is willing to work with me I would be willing to pay for their time. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation

RE: [asterisk-users] Help with IAX

Well this may not feel like progress, but it is. You no longer have an authentication issue, you now have a routing issue. Could you attach a copy of the extension.conf file on 192.168.253.21? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200

RE: [asterisk-users] (no subject)

Thanks; I have made the change and I will try it tomorrow! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cristian N

[asterisk-users] IVR Testing

Does anyone have any scripts or templates that could be used by an Asterisk box to call an IVR for stress testing? This task seems like it would be ideally suited to Asterisk and I wanted to see if anyone had already done this before I started trying to roll my own. Thanks, David Ruggles CCNA

[asterisk-users] IAX2 threads

references I can find on google for this error message are in the source. What does this mean and if it's a problem what should I be looking for to diagnose the cause? TIA Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

[asterisk-users] Fax detection (Sangoma)

question addressed. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options

RE: [asterisk-users] Fax detection (Sangoma)

Thanks for answering my question. I apologize for not looking harder, I'll look harder next time before asking the list. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

RE: [asterisk-users] ExternalIVR() Dialplan function and Festival

I ended up using text2wave to create a wav file and then added it to the prompt list and that worked. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

[asterisk-users] ExternalIVR() Dialplan function and Festival

Is there any way to use Festival from script called by the ExternalIVR() dialplan function? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided

[asterisk-users] IAX2 Question (Asterisk 1.4 tarball)

jitterbuffer=no tos=lowdelay authdebug=no [asteriskm] type=user context=incoming-iax auth=plaintext secret=asgard host=192.168.0.160 qualify=yes trunk=yes **extensions.conf** [general] [incoming-iax] exten = _X,1,AGI(rexx.agi) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe

RE: [asterisk-users] IAX2 Question (Asterisk 1.4 tarball)

if anyone knows. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ruggles Sent: Tuesday, March 13, 2007 11:38 AM To: 'Asterisk Users

[asterisk-users] ACM question

999ms rtt min/avg/max/mdev = 0.278/0.288/0.298/0.010 ms [EMAIL PROTECTED] ~]# telnet 192.168.0.160 5038 Trying 192.168.0.160... telnet: connect to address 192.168.0.160: No route to host telnet: Unable to connect to remote host: No route to host [EMAIL PROTECTED] ~]# Thanks, David Ruggles CCNA MCSE

RE: [asterisk-users] ACM question

Thanks! That was the problem. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Edwards Sent: Monday, March 12, 2007 12:35 PM

RE: [asterisk-users] Call load balancing

What kind of hardware are you using in your setup? I'm using dell GX150 PIII 1G 512M, because I can get them in quantity and the parts are easily interchangeable Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

RE: [asterisk-users] Call load balancing

That's cool, but I doubt my systems could handle that same load ;) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Edwards Sent

RE: [asterisk-users] Call load balancing

and reference material. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update

RE: [asterisk-users] Call load balancing

Never mind I found it shortly after sending this :S Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ruggles Sent: Friday, March

[asterisk-users] Cdr_mysql compile question

-devel? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options

RE: [asterisk-users] Cdr_mysql compile question

Nevermind, this was a dumb question :( Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ruggles Sent: Friday, March 09, 2007 1

[asterisk-users] Call load balancing

the routing if I have five calls each of the IVR * boxes gets two call and the next call would go to the system that currently has the lowest number of calls? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

[asterisk-users] GSM cleanup (pops, clicks and static)

available for cleaning up gsm files? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list

RE: [asterisk-users] Does Asterisk support DNIS?

Just to let everyone know. I restart my Asterisk box and ztcfg wouldn't run any more. I reran wancfg-zaptel and now everything is working correctly. It's picking up the DNIS digits without any problem. I still have to figure out ztcfg quits working every time I reboot though. Thanks, David

RE: [asterisk-users] Does Asterisk support DNIS?

the amount of time, but I don't know what it's doing and it doesn't help Asterisk recognize the DNIS. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation

RE: [asterisk-users] Does Asterisk support DNIS?

it may have been a little too abrasive) this configuration is very standard and so I find it hard to believe that Asterisk can't handle it. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200[EMAIL PROTECTED

RE: [asterisk-users] Does Asterisk support DNIS?

specific information a good overview of the wink start process can be found here: http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080 1123bb.shtml#topic2a Can anyone tell me how to configure Asterisk to pickup the DNIS digits off a wink start T1? Thanks, David Ruggles CCNA

[asterisk-users] Sangoma A101 install problem

: FXS Kewlstart (Default) (Slaves: 25) 25 channels configured. ZT_SPANCONFIG failed on span 1: Invalid argument (22) Any ideas what went wrong? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

RE: [asterisk-users] Sangoma A101 install problem

I reran the install and I had answered one question wrong. I think this fixed it. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf

[asterisk-users] DNIS on T1 channels

. Can anyone point me in the right direction to do this? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users

[asterisk-users] Does Asterisk support DNIS?

send DNIS of 12345, Asterisk will jump from extension 1 to extension 2 to extension 3 to extension 4 to extension 5. Only executing the first one or two lines in each. This is a PITA! And make absolutely no sense to me. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data

[asterisk-users] T1 card recommendation

that leads to this question: I'll be using T1s in the USA. What experiences have you all had with different cards and what seems to work best? TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

[asterisk-users] AGI question

normally? TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options

[asterisk-users] Detect hang-up

I've got an X100P that doesn't seem to be detecting hang-ups. I'm not sure what it's supposed to do, but I wouldn't expect it to continue processing the dial plan. Any pointers? Documentation locations that address hanging up would greatly appreciated! TIA!! Thanks, David Ruggles CCNA MCSE (NT

RE: [asterisk-users] Detect hang-up

'incoming' If this offers a clue. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Guillermo Salas M. Sent: Friday, February 09, 2007 3

RE: [asterisk-users] Detect hang-up

any one point me in the right directions? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ruggles Sent: Friday, February 09, 2007 4

RE: [asterisk-users] Detect hang-up

By your post I can conclude that the console wctdm debugs to is the asterisk console. In that case I'm not getting anything from wctdm. I'm not using the safe_asterisk script I'm running asterisk -cvvv from the command line. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer

[asterisk-users] Skutch AS-66 and an X100P

the phone set goes offhook. Asterisk shows the RED alarm and then the alarm clearing but never detects the ring. Any suggestions? TIA!!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

RE: [asterisk-users] New Issue

directories and starting over from the downloads. If you any other suggestions I'll do them. TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf

[asterisk-users] Can't get asterisk to compile chan_zap (was New Issue)

is located in /usr/include/zaptel I also tried ./configure --with-zap=/usr/src/zaptel-1.4.0 which is the zaptel source and it didn't work either. I don't really know what else to try. I greatly appreciate any help TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer

RE: [asterisk-users] Can't get asterisk to compile chan_zap (was NewIssue)

I had a typo in my last email. I meant --with-zaptel where I wrote --with-zap. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided

RE: [asterisk-users] Can't get asterisk to compile chan_zap (was NewIssue)

to be finding the /usr/include/zaptel directory and files fine. Is there anything else I can do that might offer information that could help track this problem down? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

[asterisk-users] Can't get asterisk to compile chan_zap (was NewIssue)

for ZT_TONE_DTMF_BASE in zaptel.h... Yes lines snipped So it seems to be finding the /usr/include/zaptel directory and files fine. Is there anything else I can do that might offer information that could help track this problem down? Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer

RE: [asterisk-users] Can't get asterisk to compile chan_zap (wasNewIssue)

I've been trying to snip message to keep them from getting too large, maybe I over did it. :) chan_zap.c is in /usr/src/asterisk-1.4.0/channels But doesn't show up in the list of channels in make menuconfig Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910

RE: [asterisk-users] Can't get asterisk to compile chan_zap (wasNewIssue)

Menuselect-tree does have a member entry for chan_zap. I has two depend subnodes and one use subnode. The depends are: zaptel and tonezone The use is: pri (I've installed libpri also) Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL

RE: [asterisk-users] Can't get asterisk to compile chan_zap(wasNewIssue)

that I have! :) Have a single X100P in the system and ztcfg configures the board no problem. zttool confirms the board is there and shows RED when the phone line is removed and OK when the phone line is plugged in. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc

RE: [asterisk-users] New user question (X100P)

and 01:08.0 are the X100P What linux distribution do you use, anyway? Fedora Core 6 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided

RE: [asterisk-users] New user question (X100P) (ADDENDUM)

linux distribution do you use, anyway? Fedora Core 6 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users

RE: [asterisk-users] New user question (X100P) (ADDENDUM)

One other note, the output of lspci for the two X100Ps is: 01:07.0 Communication controller: Motorola Wildcard X100P 01:08.0 Communication controller: Motorola Wildcard X100P Thanks, David ___ --Bandwidth and Colocation provided by Easynews.com --

RE: [asterisk-users] New user question (X100P)

=noacpi' at boot in order for it to identify those cards (as well as TDM400P cards). Tried this and it didn't make any difference. What kernmel version? 2.6.19-1.2895 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED

RE: [asterisk-users] New user question (X100P) SOLVED!!!

Thanks everyone! I removed the extra X100P and tried the remaining X100P in both PCI slots and it works in one and doesn't work in the other. I really only need one for early testing so this is good. Thanks again! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data

[asterisk-users] New Issue

and globals sections of extensions came from the sample. I started Asterisk using asterisk -cvvv and it doesn't seem to have any errors, but I can't find where it parses zapata.conf. I do see it parsing extensions.conf What should I do? TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network

RE: [asterisk-users] New Issue

I'm missing chan_zap.so, I'm going to make and make install again as per: http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL

RE: [asterisk-users] New Issue

Well that didn't work. I still don't have a zap channel driver. What else can I try? TIA! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

RE: [asterisk-users] New Issue

Thanks for the reply, but when I go to the asterisk source directory and issue make menuconfig I get: make: *** No rule to make target `menuconfig'. Stop. The source I have is the latest tar file from the astrisk site. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data

RE: [asterisk-users] New Issue

, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cosmin Prund Sent: Tuesday, February 06, 2007 5:26 PM To: Asterisk Users Mailing List - Non

[asterisk-users] New user question (X100P)

keeping the X100Ps or should I get a TDM400P like used in TFOT, or something else? (again just for testing) If there are other things I should check first please let me know!! TIA! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network EngineerSafe Data, Inc. (910) 285-7200 [EMAIL