My apologies for the OT request, I think more people here may have what I am
looking for than on the commercial list (which I did post to also).
I'm looking for a used 2 FXS port pci card, don't care who makes it as long
as it works. Oh and I have a limited budget...;)
If you have anything you
Well it would seem that Cisco chose not to make their SEP_MAC.cnf.xml format
standard across all of their phone models. I have had similar issues getting
various models to work. It has made it a challenge, for no obvious good
reason IMO. I have pasted a SEP_MAC.cnf.xml that I use for a 7941G-GE.
Go here
www.voip-info.org
and read alot. Almost everything you need to know (or a link to it) can
be found through there.
Seriously, its your best starting point
regards,
Glenn
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Vytenis
Greetings all,
I'm not real good with dial plan programming and need some help. I've looked
at the 2nd edition of the Asterisk book about GotoIf() and have a basic idea
what I need to do but not sure about the correct way or the best way, to set
it up. I need to branch based on whether the
Roy,
I just attempted to use a blank CTLSEP(mac).tlv file with my Cisco 7971G-GE
and it would not complete booting. The message log shows that the when the
phone finds the blank CTLSEP(mac).tlv file it says CTL update failed,
retries two more times, then the status line shows Configuring IP then
Here is a little more info...
I hooked up the 7971G-GE to my pc and grabbed this with tera-term. Its the
console output during the CTL update process. I am using SIP70.8-3-3.
NOT 09:28:45.969295 DHCP: Restart - delay = 1
NOT 09:28:45.981198 DHCP: Sending Release...
NOT 09:28:49.000449 DHCP:
Here is the info on the Cisco console cable I use. There are a couple ways
to make the connection depending on what you have available. I used a piece
of 6 wire flat satin (like the 4 wire telephone station cord only with 6
wires) and put an RJ-12 on one end then put an RJ-24 on the other with
used for many applications,
including Ethernet 10 position plugs - seldom if ever seen.
For more detail:
http://en.wikipedia.org/wiki/Modular_connector
John Novack
Glenn Cobb wrote:
Here is the info on the Cisco console cable I use. There
are a couple
ways to make the connection
Greetings list...
I have a Trixbox based Asterisk system and would like to implement a loose
call accounting system. The system is built on Trixbox version 2.2.8 with
Asterisk 1.2.24 and FreePBX 2.3.1. Because there are a couple thousand
existing account codes for various projects, and new
Is it absolutely necessary to have ALL 230 clients get the message at once?
Could a few clients in each area be paged to get the announcement to
everyone in that area? If these are all soft clients then maybe setting up a
recording and then paging groups and having the recording played to smaller
Have a look at this.
http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+cisco+79xx
Glenn
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Lacatus
Sent: Friday, October 26, 2007 12:32 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users]
I am not sure if this is what you are looking for but I have this setup on a
Cisco 7971. I just duplicated all of the line button=1 entries as line
button2 and I can have 2 calls going simultaneously, put each on hold,
etc and only one sip peer shows in FreePBX. I'm using Trixbox 2.3.0.2 with
But I believe Cisco is the only manufacturer producing a phone with a
gigabit port for connecting a desktop pc. Anyone know of any other?
Glenn
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian West
Sent: Monday, October 01, 2007 7:18 PM
To: Asterisk
I do not believe that the web page referenced below states that you need a
license to use Cisco phones with any pbx other than Call Manager. It only
states that you are required to have a license regardless of the protocol
used and their documentation is specifically aimed at Call Manager
In trying to verify licensing requirements I called Tech-Data and spoke to
the Cisco licensing reps there (my company is set up as a reseller through
Tech-Data) and was informed by them that a license for Cisco VoIP phones is
only required if connecting it to a Call Manager or any other Cisco
15 matches
Mail list logo
